Heat-Transfer During Polymer Combustion

The nature of surface and subsurface reactions in polymer combustion is poorly underst0od.l During the burning of thermoplastic polymers a melt layer is observed on the surface, and below the melt layer there is thermal wave penetration. But the exact thickness of the melt layer and the thickness of the thermal wave penetration have not been precisely measured, although a qualitative idea has been given.

Thermal extrusion of starch film with alcohol

A one-step thermal extrusion process has been investigated for the modification of starch with alcohol in order to improve the film properties. Unmodified starch/glycerol mixtures containing Methanol (MetOH), ethanol (EtOH) and their combinations (5, 10 and 15 wt%) were thermally extruded to produce thermoplastic. The final hot-pressed film showed increased stiffness and crystallinity, while having decreased moisture uptake due to oxidation and alcohol complexing molecular interactions. The Young’s Modulus, tensile strength and elongation at break increased by 60%, 15% and 32% respectively, for 5 wt% MetOH derived film, compared to the control. The film moisture content was reduced by up to 15 wt% for 5 wt% EtOH-derived film. Generally the crystallinity increased in the alcohol-derived films due to an increased complexing of alcohol with starch forming the VH polymorph. Fourier transform infra-red (FTIR) and proton nuclear magnetic resonance (1HNMR) spectroscopic analysis were used to discuss the molecular interactions between the starch and alcohol molecules.

Eco-friendly wood polymer composites for sustainable design applications

Environmental inputs can improve the level of innovation by interconnecting them with traditional inputs regarding the properties of materials and processes as a strategic eco-design procedure. Advanced engineered polymer composites are needed to meet the diverse needs of users for high-performance automotive, construction and commodity products that simultaneously maximize the sustainability of forest resources. In the current work, wood polymer composites (WPC) are studied to promote long-term resource sustainability and to decrease environmental impacts relative to those of existing products. A series of polypropylene wood–fiber composite materials having 20, 30, 40 and 50 wt. % of wood–fibers were prepared using twin-screw extruder and injection molding machine. Tensile and flexural properties of the composites were determined. Polypropylene (PP) as a matrix used in this study is a thermoplastic material, which is recyclable. Suitability of the prepared composites as a sustainable product is discussed.

INFLUENCE OF MICROSTRUCTURE ON THE TOUGHNESS OF CARBON FIBRE/PLASTIC COMPOSITES.

A preliminary study is presented of the relationship between the microstructural aspects of failure and the fracture energy G//1//C for cracking parallel to the fibres in long-fibre/thermoplastic matrix composites. Fracture energies are measured by a new technique, and fracture surfaces generated by the test are examined by scanning electron microscopy.

INFLUENCE OF MICROSTRUCTURE ON THE TOUGHNESS OF CARBON FIBRE/PLASTIC COMPOSITES.

A preliminary study is presented of the relationship between the microstructural aspects of failure and the fracture energy G//l//C for cracking parallel to the fibres in long-fibre/thermoplastic matrix composites. Fracture energies are measured by a new technique, and fracture surfaces generated by the test are examined by scanning electron microscopy.

Shear Localization In Dynamic Deformation: Microstructural Evolution

Investigations made by the authors and collaborators into the microstructural aspects of adiabatic shear localization are critically reviewed. The materials analyzed are low-carbon steels, 304 stainless steel, monocrystalline Fe-Ni-Cr, Ti and its alloys, Al-Li alloys, Zircaloy, copper, and Al/SiCp composites. The principal findings are the following: (a) there is a strain-rate-dependent critical strain for the development of shear bands; (b) deformed bands and white-etching bands correspond to different stages of deformation; (c) different slip activities occur in different stages of band development; (d) grain refinement and amorphization occur in shear bands; (e) loss of stress-carrying capability is more closely associated with microdefects rather than with localization of strain; (f) both crystalline rotation and slip play important roles; and (g) band development and band structures are material dependent. Additionally, avenues for new research directions are suggested.

Tensile and compressive deformation of a short-glass-fiber-reinforced liquid-crystalline polymer

Results of tensile and compression tests on a short-glass-fiber-reinforced thermotropic liquid crystalline polymer are presented. The effect of strain rate on the compression stress-strain characteristics has been investigated over a wide range of strain rates epsilon between 10(-4) and 350 s-1. The low-strain-rate tests were conducted using a screw-driven universal tensile tester, while the high-strain-rate tests were carried out using the split Hopkinson pressure bar technique. The compression modulus was shown to vary with log10 (epsilon) in a bilinear manner. The compression modulus is insensitive to strain rate in the low-strain-rate regime (epsilon = 10(-4) - 10(-2) s-1), but it increases more rapidly with epsilon at higher epsilon. The compression strength changes linearly with log10 (epsilon) over the entire strain-rate range. The fracture surfaces were examined by scanning electron microscopy.

Fatigue fracture-behavior of carbon-fiber-reinforced modified bismaleimide composites

The fracture toughness and fatigue fracture behaviour of carbon-fiber-reinforced modified bismaleimide (BMI) composites have been studied. These composites were found to have higher fracture toughnes, better damage tolerance and longer fatigue life than carbon-fiber composites with epoxy matrices. Delamination is the major mode of failure in fatigue and it is controlled by the properties of the matrix and interface. The improved performance is dire to the presence of thermoplastic particles in the modified BMI matrix which gives rise to enhanced fiber/matrix adhesion and more extensive plastic deformation. The fatigue behaviour also depends on the stacking sequence, with the multidirectional [45/90/-45/0] fiber-reinforced modified BMI composite having a lower crack propagation rate and longer fatigue life than the unidirectional laminate. This arises because of the constraint on the damage processes due to the different fiber orientation in the plies.

A study on stratification of concentration in crystal-growth of alpha-liio3 by holographic-interferometry

A new thermoplastic-photoconductor laser holographic recording system has been used for real-time and in situ observation of alpha-LiIO3 crystal growth. The influence of crystallization-driven convection on the concentration stratification in solution has been studied under gravity field. It is found that the stratification is closely related to the seed orientation of alpha-LiIO3 crystal. When the optical axis of crystal seed C is parallel to the gravity vector g, the velocity of the concentration stratification is two times larger than that in the case of C perpendicular-to g. It needs 40 h for the crystalline system of alpha-LiIO3 to reach stable concentration distribution (expressed as tau) at 47.6-degrees-C. The time tau is not sensitive to the seed orientation. Our results provide valuable data for designing the crystal growth experiments ia space.

High-Strength Composite Fibers: Realizing True Potential of Carbon Nanotubes in Polymer Matrix through Continuous Reticulate Architecture and Molecular Level Couplings

Carbon nanotubes have unprecedented mechanical properties as defect-free nanoscale building blocks, but their potential has not been fully realized in composite materials due to weakness at the interfaces. Here we demonstrate that through load-transfer-favored three-dimensional architecture and molecular level couplings with polymer chains, true potential of CNTs can be realized in composites as Initially envisioned. Composite fibers with reticulate nanotube architectures show order of magnitude improvement in strength compared to randomly dispersed short CNT reinforced composites reported before. The molecular level couplings between nanotubes and polymer chains results in drastic differences in the properties of thermoset and thermoplastic composite fibers, which indicate that conventional macroscopic composite theory falls to explain the overall hybrid behavior at nanoscale.

Influência da associação de catalisadores químicos na cimentação de pinos pré-fabricados de fibra de vidro

O objetivo deste estudo foi avaliar a Influência da associação de catalisadores químicos junto a diferentes sistemas adesivos autocondicionantes e cimentos resinosos de dupla polimerização, na cimentação de pinos pré-fabricados de fibra de vidro, quanto a sua resistência ao cisalhamento por extrusão - push out, seu grau de conversão e nanoinfiltração. Foram utilizadas trinta raízes bovinas extraídas, que tiveram seus canais obturados com guta-percha termoplastificada, divididas em três grupos: G1 - Adper SE Plus /Rely X ARC; G2- Adper SE Plus / Catalisador Scotchbond + Rely X ARC ; G3- Clearfil SE Bond / ED Primer + Panavia F. Após a cimentação dos pinos foram obtidas fatias das raízes, com 1mm de espessura, dos terços cervical (C), médio (M) e apical (A). O ensaio de resistência ao cisalhamento por extrusão foi realizado em máquina de ensaio universal EMIC D500 com carga de 100KN à velocidade de 1,0 mm/min, até o deslocamento do pino. Os dados obtidos no ensaio foram tabulados e submetidos à análise estatística. A análise de variância a dois critérios mostrou que apenas os fatores grupo e profundidade foram significativos, não sendo significativa a sua interação. O resultado do teste de Tukey (ρ≥0,05), para o fator grupo, mostrou que a menor média de resistência ao cisalhamento por extrusão foi obtida pelo grupo 3, que apresentou diferença estatística significativa para os grupos 1 e 2 que não diferiram entre si. Para o fator Profundidade a maior média foi obtida no terço cervical que apresentou diferença estatística significativa para os terços médio e apical que não diferiram entre si: A análise do grau de conversão foi feita após vinte e quatro horas e os fatores estudados foram os cimentos resinosos Panavia F e Rely X ARC e os catalisadores químicos ED Primer e Catalisador Scotchbond, na forma incorporada ou aplicada superficialmente aos cimentos, formando 10 grupos experimentais. Para o grau de conversão, o teste de Tukey mostrou que o catalisador químico não aumentou o grau de conversão do RelyX ARC, já para o Panavia F, este aumentou significativamente seu grau de conversão. Quanto a análise em MEV da nanoinfiltração para o fator grupo, o resultado do teste de Tukey (ρ≥0,05) mostrou que a maior média foi obtida pelo grupo 3 que apresentou diferença estatística significativa para os grupos 1 e 2, que não diferiram entre si. Para o fator Profundidade a maior média foi obtida no terço apical que apresentou diferença estatística significativa para o terço cervical, que não diferiu do terço médio. Conclusões: 1- A associação de catalisadores químicos não aumentou a resistência ao cisalhamento por extrusão dos pinos de fibra de vidro. 2- O cimento Panavia F é dependente de catalisador aumentar o grau de conversão. 3- A associação de catalisadores químicos não foi capaz de alterar o padrão da camada híbrida, representado pela nanoinfiltração. 4- A nanoinfiltração está associada inversamente ao grau de conversão dos sistemas de cimentação, o que contribui negativamente para a resistência adesiva de pinos de fibra de vidro.

Nanocompósitos de elastômero termoplástico à base de PP/EPDM/argila organofílica

Neste trabalho foram preparados nanocompósitos de elastômeros termoplásticos à base de PP/EPDM/argila organofílica. Foram utilizados como agentes interfaciais polipropileno e terpolímero de etileno-propileno-dieno ambos modificados com grupos anidrido maleico, PP-MA e EPDM-MA, respectivamente. Dois tipos de argila organofílica, que se diferenciam pela estrutura química do surfactante e conseqüentemente pela estabilidade térmica, foram empregados como carga inorgânica. Os nanocompósitos foram preparados pela técnica de intercalação por fusão em câmara interna de mistura e a incorporação da argila foi feita pela adição de masterbatches previamente preparados. Foram investigadas as propriedades de tração, reométricas e ainda a morfologia (cristalinidade e estrutura obtida) dos nanocompósitos a fim de estabelecer a influência do tipo e quantidade de argila organofílica e agente interfacial. Os resultados mostraram que a adição de agente interfacial melhorou a dispersão da argila organofílica na matriz de PP/EPDM, particularmente o PP-MA. Foram obtidos nanocompósitos com estruturas mistas intercaladas e esfoliadas, que resultaram em maiores valores de módulo de elasticidade e manutenção dos valores de deformação. As propriedades reométricas confirmaram o maior grau de dispersão da argila organofílica em nanocompósitos contendo PP-MA. Teores crescentes de argila reduziram a cristalinidade dos nanocompósitos, os quais quando reprocessados, mantiveram as características inerentes ao TPE de origem. Por fim, a estrutura do surfactante presente

Nanocomposites de Poliuretanos Elastoméricos y Nanotubos de Carbono Multipared

218p. -- Tesis con mención "Doctor europeus" realizada en el periodo de Octubre 2005-Mayo 2010, en el Grupo "Materiales+Tecnologías" (GMT).

利用转基因植物生产生物可降解塑料(PHB)的研究

聚 3 一控基丁酸酯 (Poly – 3 - hydroxybutyrate,PHB) 及其它类型的聚 3-泾基链烷酸醋同属于聚酯类物质 , 是自然界中多种细菌的碳源及能源储备物。这种聚酯的物理化学特性与传统塑料相似 , 并具有生物可降解性 , 如能取代化学合成塑料将减少环境中的塑料废弃物 , 从源头治理 " 白色污染 " 问题。微生物发酵法生产的 PHB 价格过高 , 无法在市场上与化学合成塑料竞争。随着分子生物学的发展 , 人们逐渐将视线转向植物生物反应器。转基因植物能够利用二氧化碳为碳源、太阳能为能源合成目的产物 , 大大降低生产成本 , 为生产具有市场 竞争力的新型生物可降解塑料提供可行途径。在此领域虽然己取得一定进展 , 但远未达到商业化生产水平。大规模商业化生产要求转基因植物能够在确保环 境安全性的前提下高效、稳定地生产 PHB 。本文尝试改善植物中 PHB 的生产体系 ,为环保型塑料早日进入市场作出努力。 1. 由于表达框架中多次使用同一启动子会导致基因沉默 , 本文克隆了另一 种子特异性启动子 nap300, 以替换重复使用的7S启动子,减轻“共抑制”。将 nap300 与 GUS 基因相连进行功能鉴定。荧光检测和组织化学染色的结果都证明此仅 30Obp 的 DNA 序列足以调控基因进行种子特异性表达。尽管 B 盒作为 高度保守区在种子特异性表达中起重要作用 , 位于此处的两个碱基替代型突变 并未使 nap300 的活性明显降低 , 对启动子的时空表达模式也无明显影响。将 nap300 、 7S 分别与 phbA 基因 ( 编码 3-酮硫裂解酶) 相连 , 在相似表达环境中 对二者功能进行比较 , 发现两个启动子表达模式基本相同并在同一时期达到活 性高峰 , 因此 nap300 可用于改善 PHB 合成基因在植物体内的表达调控。通过 对种子特异性启动子的比较可加深对其表达模式的了解 , 为植物基因工程中的 精细调控提供依据。 2. 叶绿体基因工程是随着植物遗传转化技术发展刚刚兴起的生物技术 , 具 有超量表达外源基因 , 为原核基因提供适宜表达环境 , 消除 “位置效应”和基因沉默 , 环境安全性好等优点 , 较更适合用于植物生物反应器方面的研究。本研究在国内率先探讨将叶绿体转化技术引入植物生产生物可降解塑料这一领域 的可行性 ( 国外仅有日本一例 ), 构建了叶绿体转化及表达载体 pTRV-PHB, 通过基因枪法将 PHB 合成相关基因导入烟草叶绿体基因组。转基因烟草顺利达到同质化，其形态和生长发育均无异常。 Northern 点杂交检测表明与 PHB 合成相关的三个基因均能在转录水平表达 , 未出现核转化中经常发生的“基因沉默”现象。通过 RT-PCR 进一步检测表明叶绿体型转基因烟草中目的基因的表达水平明显比核转化植株中相应基因的表达水平高。气相色谱分析确证转基因植株具有合成 PHB 的能力。这些都表明叶绿体转化适合用于转基因植物生产 PHB的研究。虽然叶绿体型转基因烟草中产物含量偏低 , 并未达到预期结果 , 但经进一步改进与完善 , 终将会成功地用于生产高附加值产品的植物基因工程中。 3. 为初步探讨叶绿体转化中在同源重组反应介导下整合外源基因的机理 , 从油菜叶绿体基因组中分离两段序列作为同源片段 , 基因枪法转化烟草 , 结果显示即使供体所含同源片段与受体叶绿体基因组相应区域差异高达 10%, 转化效率也无降低。这一现象的发现有助于促进“通用载体”　的改进 , 扩展叶绿体转化受体范围乃至达到商业化应用水平。 4. 成功地通过二次转化获得整合并表达多基因的转基因烟草 , 缩短了研究周期 , 对相关转基因植物的研究有一定参考价值。本文还优化了油菜转化体系 , 使转基因油菜同时整合三个 PHB 合成相关基因的效率由 7.69% 增加至 16.0% 。 田间试验与产物分析正在进行中。

羊草叶片光合参数对不同水分变化的响应机理与模拟林祥磊

由温室气体的大量排放引起的全球环境变化不仅导致了温度的升高和降水格局的变化，亦引起了干旱等极端气候事件的频繁发生。研究羊草光合参数对水分胁迫及复水的响应，可以增进全球变化对植物光合作用和陆地生态系统影响的理解，揭示羊草光合参数对水分胁迫及复水的响应机理，为发展植物光合参数对水热变化的响应模型提供参数与依据。基于温室模拟试验和野外观测实验，采用Li-6400R便携式光合作用系统（Li-cor, Lincoln, NE, USA）测定了羊草（Leymus chinensis）叶片A/Ci曲线(净光合速率A和胞间CO2浓度Ci的关系曲线)，获取了羊草叶片的光合参数Vcmax（Rubisco的最大羧化速率）、Jmax（最大光合电子传递速率）和TPU（磷酸丙糖利用率），分析研究了羊草叶片光合参数Vcmax（Rubisco的最大羧化速率）、Jmax（最大光合电子传递速率）和TPU（磷酸丙糖利用率）对干旱与复水的响应机理。结果表明，无论是模拟实验还是野外观测均显示羊草叶片的光合参数随着土壤水分的增加呈抛物线曲线变化，但各光合参数最大值对土壤水分的响应不同。温室模拟下的羊草光合参数Vcmax，Jmax和TPU在土壤含水量分别在15.56%，15.89%和16.23%时达到最大，而野外观测羊草的光合参数Vcmax，Jmax和TPU在土壤含水量分别为16.89%，17%和16.79%时达到最大。复水后羊草植株叶片光合参数的变化取决于前期干旱的影响，土壤含水量18%～19%和15%～16%处理的羊草复水后光合参数能够恢复正常，前者甚至超过正常水平，说明适宜的水分胁迫在复水后能够提高羊草叶片的光合能力，促进光合作用;土壤含水量10%～12%和7%～9%处理下的羊草复水后光合参数则不能恢复到正常水平。土壤含水量15%～16%可能是羊草光合能力在水分胁迫后能否恢复的阈值。