885 resultados para theoretical practice
Resumo:
The aim of the present work is to contribute to a better understanding of the relation between organization theory and management practice. It is organized as a collection of two papers, a theoretical and conceptual contribution and an ethnographic study. The first paper is concerned with systematizing different literatures inside and outside the field of organization studies that deal with the theory-practice relation. After identifying a series of positions to the theory-practice debate and unfolding some of their implicit assumptions and limitations, a new position called entwinement is developed in order to overcome status quo through reconciliation and integration. Accordingly, the paper proposes to reconceptualize theory and practice as a circular iterative process of action and cognition, science and common-sense enacted in the real world both by organization scholars and practitioners according to purposes at hand. The second paper is the ethnographic study of an encounter between two groups of expert academics and practitioners occasioned by a one-year executive business master in an international business school. The research articulates a process view of the knowledge exchange between management academics and practitioners in particular and between individuals belonging to different communities of practice, in general, and emphasizes its dynamic, relational and transformative mechanisms. Findings show that when they are given the chance to interact, academics and practitioners set up local provisional relations that enable them to act as change intermediaries vis-a-vis each other’s worlds, without tying themselves irremediably to each other and to the scenarios they conjointly projected during the master’s experience. Finally, the study shows that provisional relations were accompanied by a recursive shift in knowledge modes. While interacting, academics passed from theory to practical theorizing, practitioners passed from an involved practical mode to a reflexive and quasi-theoretical one, and then, as exchanges proceeded, the other way around.
Resumo:
Theoretical and practical concerns shape our conceptualizations of mental health and mental illness later in life. Together, these concerns form an ecology of theory and practice, shaping our expectations of later life and our efforts with an din behalf of older adults. Introduces a series of article which highlights several aspects of mental health and mental illness in later life to provide an understanding of the challenges faced by the aged in maintaining mental health.
Resumo:
Renewable energy is growing in demand, and thus the the manufacture of solar cells and photovoltaic arrays has advanced dramatically in recent years. This is proved by the fact that the photovoltaic production has doubled every 2 years, increasing by an average of 48% each year since 2002. Covering the general overview of solar cell working, and its model, this thesis will start with the three generations of photovoltaic solar cell technology, and move to the motivation of dedicating research to nanostructured solar cell. For the current generation solar cells, among several factors, like photon capture, photon reflection, carrier generation by photons, carrier transport and collection, the efficiency also depends on the absorption of photons. The absorption coefficient,α, and its dependence on the wavelength, λ, is of major concern to improve the efficiency. Nano-silicon structures (quantum wells and quantum dots) have a unique advantage compared to bulk and thin film crystalline silicon that multiple direct and indirect band gaps can be realized by appropriate size control of the quantum wells. This enables multiple wavelength photons of the solar spectrum to be absorbed efficiently. There is limited research on the calculation of absorption coefficient in nano structures of silicon. We present a theoretical approach to calculate the absorption coefficient using quantum mechanical calculations on the interaction of photons with the electrons of the valence band. One model is that the oscillator strength of the direct optical transitions is enhanced by the quantumconfinement effect in Si nanocrystallites. These kinds of quantum wells can be realized in practice in porous silicon. The absorption coefficient shows a peak of 64638.2 cm-1 at = 343 nm at photon energy of ξ = 3.49 eV ( = 355.532 nm). I have shown that a large value of absorption coefficient α comparable to that of bulk silicon is possible in silicon QDs because of carrier confinement. Our results have shown that we can enhance the absorption coefficient by an order of 10, and at the same time a nearly constant absorption coefficient curve over the visible spectrum. The validity of plots is verified by the correlation with experimental photoluminescence plots. A very generic comparison for the efficiency of p-i-n junction solar cell is given for a cell incorporating QDs and sans QDs. The design and fabrication technique is discussed in brief. I have shown that by using QDs in the intrinsic region of a cell, we can improve the efficiency by a factor of 1.865 times. Thus for a solar cell of efficiency of 26% for first generation solar cell, we can improve the efficiency to nearly 48.5% on using QDs.
Resumo:
The relation between theory and practice in social work has always been controversial. Recently, many have underlined how language is crucial in order to capture how knowledge is used in practice. This article introduces a language perspective to the issue, rooted in the ‘strong programme’ in the sociology of knowledge and in Wittgenstein’s late work. According to this perspective, the meaning of categories and concepts corresponds to the use that concrete actors make of them as a result of on-going negotiation processes in specific contexts. Meanings may vary dramatically across social groups moved by different interests and holding different cultures. Accordingly, we may reformulate the issue of theory and practice in terms of the connections between different language games and power relationship between segments of the professional community. In this view, the point is anyway to look at how theoretical language relates to practitioners’ broader frames, and how it is transformed while providing words for making sense of experience.
Resumo:
The welfare sector has seen considerable changes in its operational context. Welfare services respond to an increasing number of challenges as citizens are confronted with life’s uncertainties and a variety of complex situations. At the same time the service-delivery system is facing problems of co-operation and the development of staff competence, as well as demands to improve service effectiveness and outcomes. In order to ensure optimal user outcomes in this complex, evolving environment it is necessary to enhance professional knowledge and skills, and to increase efforts to develop the services. Changes are also evident in the new emergent knowledge-production models. There has been a shift from knowledge acquisition and transmission to its construction and production. New actors have stepped in and the roles of researchers are subject to critical discussion. Research outcomes, in other words the usefulness of research with respect to practice development, is a topical agenda item. Research is needed, but if it is to be useful it needs to be not only credible but also useful in action. What do we know about different research processes in practice? What conceptions, approaches, methods and actor roles are embedded? What is the effect on practice? How does ‘here and now’ practice challenge research methods? This article is based on the research processes conducted in the institutes of practice research in social work in Finland. It analyses the different approaches applied by elucidating the theoretical standpoints and the critical elements embedded in them, and reflects on the outcomes in and for practice. It highlights the level of change and progression in practice research, arguing for diverse practice research models with a solid theoretical grounding, rigorous research processes, and a supportive infrastructure.
Resumo:
The increasing practice of offshore outsourcing software maintenance has posed the challenge of effectively transferring knowledge to individual software engineers of the vendor. In this theoretical paper, we discuss the implications of two learning theories, the model of work-based learning (MWBL) and cognitive load theory (CLT), for knowledge transfer during the transition phase. Taken together, the theories suggest that learning mechanisms need to be aligned with the type of knowledge (tacit versus explicit), task characteristics (complexity and recurrence), and the recipients’ expertise. The MWBL proposes that learning mechanisms need to include conceptual and practical activities based on the relative importance of explicit and tacit knowledge. CLT explains how effective portfolios of learning mechanisms change over time. While jobshadowing, completion tasks, and supportive information may prevail at the outset of transition, they may be replaced by the work on conventional tasks towards the end of transition.
Resumo:
The rationalist approach to strategizing emphasizes analytical and convergent thinking. Without denying the importance of this approach, this book argues that strategists must learn to complement it with a more creative approach to strategizing that emphasizes synthetic and divergent ways of thinking. The theoretical underpinnings of this approach include embodied realism, interpretivism, practice theory, theory of play, design thinking, as well as discursive approaches such as metaphorical analysis, narrative analysis, dialogical analysis and hermeneutics. The book includes in-depth discussions of these theories and shows how they can be put into practice by presenting detailed analyses of embodied metaphors built by groups of agents with step-by-step explanations of how this process can be implemented and facilitated. The link between theory and practice is further supported by the inclusion of several vignettes that describe how this approach has been successfully employed in a number of organizations, including BASF and UNICEF
Resumo:
The editors of Strategy as Practice, Johnson, Langley, Melin and Whittington, illustrate theoretical perspectives and alternative methodologies of 'strategy as practice' research by reflecting and commenting on selected 'classic' research papers such as Buergi, Jacobs and Roos' "From metaphor to practice in the crafting of strategy". Their paper explores how the link between the hand and the mind might be exploited in the making of strategy. Using Mintzberg's image of a potter, Buergi et al. develop a three-level theoretical schema, progressing from the physiological to the psychological to the social to trace the consequences of the hand-mind link. They discuss their model in view of an indicative case of managers from a large telecommunications firm experimenting with a process for strategy making in which they actively use their hands to construct representations of their organization and its environment.
Resumo:
Prominent challenges facing nurse leaders are the growing shortage of nurses and the increasingly complex care required by acutely ill patients. In organizations that shortage is exacerbated by turnover and intent to leave. Unsatisfactory working conditions are cited by nurses when they leave their current jobs. Disengagement from the job leads to plateaued performance, decreased organizational commitment, and increased turnover. Solutions to these challenges include methods both to retain and to increase the effectiveness of each nurse. ^ The specific aim of this study was to examine the relationships among organizational structures thought to foster the clinical development of the nurse, with indicators of the development of clinical expertise, resulting in outcomes of positive job attitudes and effectiveness. Causal loop modeling is incorporated as a systems tool to examine developmental cycles both for an organization and for an individual nurse to look beyond singular events and investigate deeper patterns that emerge over time. ^ The setting is an academic specialty-care institution, and the sample in this cross-sectional study consists of paired data from 225 RNs and their nurse managers. Two panels of survey instruments were created based on the model's theoretical variables, one completed by RNs and the other by their Nurse Managers. The RN survey panel examined the variables of structural empowerment, magnet essentials, knowledge as identified by the Benner developmental stage, psychological empowerment, job stage, engagement, intent to leave, job satisfaction and the early recognition of patient complications. The nurse manager survey panel examined the Benner developmental stage, job stage, and overall level of nursing performance. ^ Four regression models were created based on the outcome variables. Each model identified significant organizational and individual characteristics that predicted higher job satisfaction, decreased intent to leave, more effectiveness as measured by early recognition and acting upon subtle patient complications, and better job performance. ^ Implications for improving job attitudes and effectiveness focus on ways that nursing leaders can foster a more empowering and healthy work environment. ^
Resumo:
This study described home infusion techniques and practices, measured the perceived risk of HIV and hepatitis transmission to self and others, and measured the outcome expectancy of following risk reduction guidelines for 90 hemophilia patients and/or their infusion assistants. It also assessed general knowledge of HIV and hepatitis information for the same population.^ The study subjects were hemophilia patients or their infusion assistants from the Gulf States Hemophilia Center in Houston, the El Paso Satellite Hemophilia Clinic in El Paso, or Texas members of the Women Outreach Network of the National Hemophilia Foundation (WONN) group. Each subject was interviewed either by telephone or in person. The questionnaire used was developed for the study and consisted of 60 items. These items assessed general demographics for the patients and assistants, including questions about their training to do infusions as well as the actual practices, measured perceived personal risk for the transmission of HIV or hepatitis to the assistants, perceived risk of transmission of HIV or hepatitis to others for assistants and self-infusers, and the outcome expectancy for following recommended risk reduction guidelines also for both groups.^ The theoretical framework used assumed that perceived risk and outcome expectancy would be predictive of behavior. The findings did not support this theory. Instead, the findings suggest that infusion behavior is habitual in nature; most respondents perform exactly the same behavior for every infusion. Since none of the variables selected were predictive of the compliance behavior for home infusion the teaching method should be directed towards mastery learning, or learning that will incorporate the correct behavior into a habitual pattern of home infusion. ^
Resumo:
Although the computational complexity of the logic underlying the standard OWL 2 for the Web Ontology Language (OWL) appears discouraging for real applications, several contributions have shown that reasoning with OWL ontologies is feasible in practice. It turns out that reasoning in practice is often far less complex than is suggested by the established theoretical complexity bound, which reflects the worstcase scenario. State-of-the reasoners like FACT++, HERMIT, PELLET and RACER have demonstrated that, even with fairly expressive fragments of OWL 2, acceptable performances can be achieved. However, it is still not well understood why reasoning is feasible in practice and it is rather unclear how to study this problem. In this paper, we suggest first steps that in our opinion could lead to a better understanding of practical complexity. We also provide and discuss some initial empirical results with HERMIT on prominent ontologies
Resumo:
El presente trabajo trata de elementos reforzados con barras de armadura y Fibras Metálicas Recicladas (FMR). El objetivo principal es mejorar el comportamiento a fisuración de elementos sometidos a flexión pura y a flexión compuesta, aumentando en consecuencia las prestaciones en servicio de aquellas estructuras con requerimientos estrictos con respecto al control de fisuración. Entre éstas últimas se encuentran las estructuras integrales, es decir aquellas estructuras sin juntas (puentes o edificios), sometidas a cargas gravitatorias y deformaciones impuestas en los elementos horizontales debidas a retracción, fluencia y temperatura. Las FMR son obtenidas a partir de los neumáticos fuera de uso, y puesto que el procedimiento de reciclado se centra en el caucho en vez que en el acero, su forma es aleatoria y con longitud variable. A pesar de que la eficacia del fibrorefuerzo mediante FMR ha sido demostrada en investigaciones anteriores, la innovación que representa este trabajo consiste en proponer la acción combinada de barras convencionales y FMR en la mejora del comportamiento a fisuración. El objetivo es por tanto mejorar la sostenibilidad del proyecto de la estructura en HA al utilizar materiales reciclados por un lado, y aumentando por el otro la durabilidad. En primer lugar, se presenta el estado del arte con respecto a la fisuración en elementos de HA, que sucesivamente se amplía a elementos reforzados con barras y fibras. Asimismo, se resume el método simplificado para el análisis de columnas de estructuras sin juntas ya propuesto por Pérez et al., con particular énfasis en aquellos aspectos que son incompatibles con la acción de las fibras a nivel seccional. A continuación, se presenta un modelo para describir la deformabilidad seccional y la fisuración en elementos en HA, que luego se amplía a aquellos elementos reforzados con barras y fibras, teniendo en cuenta también los efectos debidos a la retracción (tension stiffening negativo). El modelo es luego empleado para ampliar el método simplificado para el análisis de columnas. La aportación consiste por tanto en contar con una metodología amplia de análisis para este tipo de elementos. Seguidamente, se presenta la campaña experimental preliminar que ha involucrado vigas a escala reducida sometidas a flexión simple, con el objetivo de validar la eficiencia y la usabilidad en el hormigón de las FMR de dos diferentes tipos, y su comportamiento con respecto a fibras de acero comerciales. Se describe a continuación la campaña principal, consistente en ensayos sobre ocho vigas en flexión simple a escala 1:1 (variando contenido en FRM, Ø/s,eff y recubrimiento) y doce columnas a flexión compuesta (variando contenido en FMR, Ø/s,eff y nivel de fuerza axil). Los resultados obtenidos en la campaña principal son presentados y comentados, resaltando las mejoras obtenidas en el comportamiento a fisuración de las vigas y columnas, y la rigidez estructural de las columnas. Estos resultados se comparan con las predicciones del modelo propuesto. Los principales parámetros estudiados para describir la fisuración y el comportamiento seccional de las vigas son: la separación entre fisuras, el alargamiento medio de las armaduras y la abertura de fisura, mientras que en los ensayos de las columnas se ha contrastado las leyes momento/curvatura, la tensión en las barras de armadura y la abertura de fisura en el empotramiento en la base. La comparación muestra un buen acuerdo entre las predicciones y los resultados experimentales. Asimismo, se nota la mejora en el comportamiento a fisuración debido a la incorporación de FMR en aquellos elementos con cuantías de armadura bajas en flexión simple, en elementos con axiles bajos y para el control de la fisuración en elementos con grandes recubrimientos, siendo por tanto resultados de inmediato impacto en la práctica ingenieril (diseño de losas, tanques, estructuras integrales, etc.). VIIIComo punto final, se presentan aplicaciones de las FMR en estructuras reales. Se discuten dos casos de elementos sometidos a flexión pura, en particular una viga simplemente apoyada y un tanque para el tratamiento de agua. En ambos casos la adicción de FMR al hormigón lleva a mejoras en el comportamiento a fisuración. Luego, utilizando el método simplificado para el análisis en servicio de columnas de estructuras sin juntas, se calcula la máxima longitud admisible en casos típicos de puentes y edificación. En particular, se demuestra que las limitaciones de la práctica ingenieril actual (sobre todo en edificación) pueden ser aumentadas considerando el comportamiento real de las columnas en HA. Finalmente, los mismos casos son modificados para considerar el uso de MFR, y se presentan las mejoras tanto en la máxima longitud admisible como en la abertura de fisura para una longitud y deformación impuesta. This work deals with elements reinforced with both rebars and Recycled Steel Fibres (RSFs). Its main objective is to improve cracking behaviour of elements subjected to pure bending and bending and axial force, resulting in better serviceability conditions for these structures demanding keen crack width control. Among these structures a particularly interesting type are the so-called integral structures, i.e. long jointless structures (bridges and buildings) subjected to gravitational loads and imposed deformations due to shrinkage, creep and temperature. RSFs are obtained from End of Life Tyres, and due to the recycling process that is focused on the rubber rather than on the steel they come out crooked and with variable length. Although the effectiveness of RSFs had already been proven by previous research, the innovation of this work consists in the proposing the combined action of conventional rebars and RSFs to improve cracking behaviour. Therefore, the objective is to improve the sustainability of RC structures by, on the one hand, using recycled materials, and on the other improving their durability. A state of the art on cracking in RC elements is firstly drawn. It is then expanded to elements reinforced with both rebars and fibres (R/FRC elements). Finally, the simplified method for analysis of columns of long jointless structures already proposed by Pérez et al. is resumed, with a special focus on the points that conflict when taking into account the action of fibres. Afterwards, a model to describe sectional deformability and cracking of R/FRC elements is presented, taking also into account the effect of shrinkage (negative tension stiffening). The model is then used to implement the simplified method for columns. The novelty represented by this is that a comprehensive methodology to analyse this type of elements is presented. A preliminary experimental campaign consisting in small beams subjected to pure bending is described, with the objective of validating the effectiveness and usability in concrete of RSFs of two different types, and their behaviour when compared with commercial steel fibres. With the results and lessons learnt from this campaign in mind, the main experimental campaign is then described, consisting in cracking tests of eight unscaled beams in pure bending (varying RSF content, Ø/s,eff and concrete cover) and twelve columns subjected to imposed displacement and axial force (varying RSF content, Ø/s,eff and squashing load ratio). The results obtained from the main campaign are presented and discussed, with particular focus on the improvement in cracking behaviour for the beams and columns, and structural stiffness for the columns. They are then compared with the proposed model. The main parameters studied to describe cracking and sectional behaviours of the beam tests are crack spacing, mean steel strain and crack width, while for the column tests these were moment/curvature, stress in rebars and crack with at column embedment. The comparison showed satisfactory agreement between experimental results and model predictions. Moreover, it is pointed out the improvement in cracking behaviour due to the addition of RSF for elements with low reinforcement ratios, elements with low squashing load ratios and for crack width control of elements with large concrete covers, thus representing results with a immediate impact in engineering practice (slab design, tanks, integral structures, etc.). Applications of RSF to actual structures are finally presented. Two cases of elements in pure bending are presented, namely a simple supported beam and a water treatment tank. In both cases the addition of RSF to concrete leads to improvements in cracking behaviour. Then, using the simplified model for the serviceability analysis of columns of jointless structures, the maximum achievable jointless length of typical cases of a bridge and building is obtained. In XIIparticular, it is shown how the limitations of current engineering practice (this is especially the case of buildings) can be increased by considering the actual behaviour of RC supports. Then, the same cases are modified considering the use of RSF, and the improvements both in maximum achievable length and in crack width for a given length and imposed strain at the deck/first floor are shown.
Resumo:
Despite the vast research examining the evolution of Caribbean education systems, little is chronologically tied to the postcolonial theoretical perspectives of specific island-state systems, such as the Jamaican education system and its relationship with the underground shadow education system. This dissertation study sought to address the gaps in the literature by critically positioning postcolonial theories in education to examine the macro- and micro-level impacts of extra lessons on secondary education in Jamaica. The following postcolonial theoretical (PCT) tenets in education were contextualized from a review of the literature: (a) PCT in education uses colonial discourse analysis to critically deconstruct and decolonize imperialistic and colonial representations of knowledge throughout history; (b) PCT in education uses an anti-colonial discursive framework to re-position indigenous knowledge in schools, colleges, and universities to challenge hegemonic knowledge; (c) PCT in education involves the "unlearning" of dominant, normative ideologies, the use of self-reflexivity, and deconstruction; and (d) PCT in education calls for critical pedagogical approaches that reject the banking concept of education and introduces inclusive pedagogy to facilitate "the passage from naïve to critical transitivity" (Freire, 1973, p. 32). Specifically, using a transformative mixed-methods design, grounded and informed by a postcolonial theoretical lens, I quantitatively uncovered and then qualitatively highlighted how if at all extra lessons can improve educational outcomes for students at the secondary level in Jamaica. Accordingly, the quantitative data was used to test the hypotheses that the practice of extra lessons in schools is related to student academic achievement and the practice of critical-inclusive pedagogy in extra lessons is related to academic achievement. The two-level hierarchical linear model analysis revealed that hours spent in extra lessons, average household monthly income, and critical-inclusive pedagogical tents were the best predictors for academic achievement. Alternatively, the holistic multi-case study explored how extra-lessons produces increased academic achievement. The data revealed new ways of knowledge construction and critical pedagogical approaches to galvanize systemic change in secondary education. Furthermore, the data showed that extra lessons can improve educational outcomes for students at the secondary level if the conditions for learning are met. This study sets the stage for new forms of knowledge construction and implications for policy change.
Resumo:
Terminologists’ interest in studying the role of metaphor and metaphorical terms in specialized communication has proliferated since the first papers addressing this issue appeared in the 1990s. However, we believe that some facets of terminological meaning still remain overlooked or merit further analysis. This paper attempts to contribute to the study of one of these facets: the figurative meaning of some compound terms used in the domain of luxury marketing and business. In order to present a systematized view of this phenomenon we will adopt some theoretical tools from the Conventional Figurative Language Theory, in order to confirm the validity of some of its postulates for compound term analysis. Next, a contrastive approach between English, Spanish and Russian compound terms will put the theoretical ideas into practice with the aim of illustrating their applied and metalinguistic potential. Some basic conclusions will be offered at the end of the paper.
Resumo:
On title page: To which is added a collection of beautiful pieces arranged as trios, duets and solos, for recreative as well as for instructive practice."