Expert review of an approach to functional capacity evaluation

Functional capacity evaluation (FCE) is a widely used tool in work rehabilitation, despite the limited examination of the soundness of its measurement properties. This paper outlines the development of a new approach to FCE, the GAPP FCE, and reports on the findings of an expert review of aspects of its content validity and technical adequacy and how it meets established test criteria. Five expert occupational therapists reviewed the materials of the GAPP FCE then completed a questionnaire related to the content validity, technical adequacy and safety, reliability, validity, practicality and utility of the GAPP FCE. The experts gave support to most aspects of these criteria. The main issue identified by the review was related to interpretation and extrapolation of the FCE results for return to work. This and other issues are discussed in relation to recent developments in FCE and plans for future development of the GAPP FCE.

Planning for institutional capacity building in war-torn areas: the case of Jaffna, Sri Lanka

This paper examines an attempt to build capacity and empower local institutions in war-torn Jaffna,, on the northern tip of Sri Lanka. A participatory approach that is aimed at social empowerment is seen to be possible even under the most restrictive of political environments. However, whether or not the development intervention provides a foundation for longer-term improvement depends on the extent to which institutional capacity is built. Through an examination of the Jaffna Reconstruction Project, it is argued that if any of the ingredients of this institutional capacity are missing, not only will the 'islands of participation and empowerment' that are built by the development initiative be short-lived, but there may also be a negligible contribution to building a foundation for longer-term improvement in quality of life. (C) 2001 Elsevier Science Ltd. All rights reserved.

Comparison of adsorption capacity of p-Cresol & p-Nitrophenol by activated carbon in single and double solute

Adsorption of p-Cresol and p-Nitrophenol by untreated activated carbon in single and multisolute solutions was carried out at 301 K and at controlled pH conditions. In acidic conditions, well below the pK(a) of both solutes, it was observed that the adsorbate solubility and the electron density of aromatic rings influenced the extent of adsorption by affecting the extent of London dispersion forces. The fitted parameters obtained from single-solute Langmuir equation show that Q(max) and the adsorption affinity of carbon for the compound with low pK(a) decrease more significantly. In higher solution pH conditions, on the other hand, it was found that electrostatic forces played a significant role on the extent of adsorption. The presence of another compound decreases Q(max) and the adsorption affinity of carbon for the principal compound. The effect of pH, on the carbon surface and on the solute molecules, must be considered. Adsorption of the solute at higher pH values was found to be dependent on the concentration of anionic form of the solute. The isotherm data were fitted to the Langmuir isotherm equation for both single and double solute solutions.

Supply chain management as beyond operational efficiency

The orthodoxy of supply chain management (SCM) emphasises competitive advantage through increased operational efficiency and market responsiveness from production and distribution processes into the hands of consumers. It anticipates that future competition will be between chains rather than between firms. While well established in other industry sectors, the SCM concept is newly developed in the Australian agri-food sector. Critical review of the concept has identified key issues of power among channel members, processes of chain initiation and innovation, and the inability of SCM to offer a viable business strategy for some firms. Building on those insights, this paper examines the supply chain concept for horticulture. Horticultural products are characterised by perishability, heterogeneity and lags in production response to market signals. Producers’ profits are vulnerable to quantity, timing of supply and product specification. Many supply chains in smaller industries are loose, fragmented, interwoven, unstable and unique! Firms operating within these environments need an astute understanding of the chains, the hierarchy of channel members and their relative position. Effective business strategies – for individual firms and supply chains - need to be developed and redeveloped to accommodate the dynamic nature of horticulture. Two case studies are discussed as contributions to this early stage of the theoretical development of supply chain management. The SCM concept also has implications for horticultural researchers, involving a wider range of industry stakeholders, technical problems and research skills. As for business management, the usefulness of the concept will depend on its capacity to increase responsiveness to customers’ preferences and customer value.

Osmoregulative capacity in birdseed millet under conditions of water stress. I. Variation in Setaria italica and Panicum miliaceum

Experiments involving 14 accessions of Panicum miliaceum L. (Proso millet) and 11 accessions of Setaria italica L. (Foxtail millet) have demonstrated variability in the degree of osmoregulative capacity among these accessions. Birdseed millet is generally claimed to be sensitive to drought stress, apparently because of a shallow root system. Accessions with high osmoregulative capacity demonstrate at least some drought tolerance. Osmoregulative capacity was measured on flag leaves of headed millet plants in pots undergoing water stress in a controlled environment chamber. Osmoregulative capacity was determined from the relationship between osmotic potential and leaf water potential; and the logarithmic relationship between osmotic potential and relative water content. The group of accessions of S. italica showed an overall level of osmoregulative capacity which was greater than that observed for the group of P. miliaceum accessions. Four accessions of S. italica (108042, 108463, 108541 and 108564) and one accession of P. miliaceum (108104) demonstrated high osmoregulative capacity. Differences of 1.05 MPa or more between observed and estimated osmotic potential were found at relative water contents of 80 % among these accessions. The extent of osmoregulative capacity was associated with osmotic potential at full turgor and the rate of decline in osmotic potential as leaf water potentail declined.

Close packed transitions in slit-shaped pores: Density functional theory study of methane adsorption capacity in carbon

An important feature of improving lattice gas models and classical isotherms is the incorporation of a pore size dependent capacity, which has hitherto been overlooked. In this paper, we develop a model for predicting the temperature dependent variation in capacity with pore size. The model is based on the analysis of a lattice gas model using a density functional theory approach at the close packed limit. Fluid-fluid and solid-fluid interactions are modeled by the Lennard-Jones 12-6 potential and Steele's 10-4-3, potential respectively. The capacity of methane in a slit-shaped carbon pore is calculated from the characteristic parameters of the unit cell, which are extracted by minimizing the grand potential of the unit cell. The capacities predicted by the proposed model are in good agreement with those obtained from grand canonical Monte Carlo simulation, for pores that can accommodate up to three adsorbed layers. Single particle and pair distributions exhibit characteristic features that correspond to the sequence of buckling and rhombic transitions that occur as the slit pore width is increased. The model provides a useful tool to model continuous variation in the microstructure of an adsorbed phase, namely buckling and rhombic transitions, with increasing pore width. (C) 2002 American Institute of Physics.

On the intrinsic capacity for increase of Australian flying-foxes (Pteropus spp., Megachiroptera)

In the reproductive biology of organisms, a continuum exists from "highly reproductive species" at one end to "survivor species" at the other end. Among other factors, the position of a species along this continuum affects its sensitivity to human exploitation and its vulnerability to extinction. Flying foxes are long-lived, seasonal breeders, with a rigid, well-defined breeding season that is largely or wholly genetically determined. Unlike opportunistic, highly reproductive species, such as rabbits or mice, female flying foxes are unable to produce viable young before their second or third year of life, and are then capable of producing just one young per year. Such a breeding strategy will be successful only if flying-foxes are long-lived and suffer naturally low mortality rates. In this paper, we assess the vulnerability of flying foxes to extinction, using basic parameters of reproduction observed in the wild, and in captive breeding colonies of P. poliocephalus, P. alecto and P. scapulatus, and survival rates that are likely to apply to Australian conditions. Our models show explicitly that flying-fox populations have a very low capacity for increase, even under the most ideal conditions. The implications of our models are discussed in reference to the long-term management and conservation needs of Australian flying foxes. We conclude that current death-rates of flying-foxes in NSW and Queensland fruit orchards are putting state populations at serious risk.

Asymmetric blasting: a rock mass dependent blast design method

Blasting has been the most frequently used method for rock breakage since black powder was first used to fragment rocks, more than two hundred years ago. This paper is an attempt to reassess standard design techniques used in blasting by providing an alternative approach to blast design. The new approach has been termed asymmetric blasting. Based on providing real time rock recognition through the capacity of measurement while drilling (MWD) techniques, asymmetric blasting is an approach to deal with rock properties as they occur in nature, i.e., randomly and asymmetrically spatially distributed. It is well accepted that performance of basic mining operations, such as excavation and crushing rely on a broken rock mass which has been pre conditioned by the blast. By pre-conditioned we mean well fragmented, sufficiently loose and with adequate muckpile profile. These muckpile characteristics affect loading and hauling [1]. The influence of blasting does not end there. Under the Mine to Mill paradigm, blasting has a significant leverage on downstream operations such as crushing and milling. There is a body of evidence that blasting affects mineral liberation [2]. Thus, the importance of blasting has increased from simply fragmenting and loosing the rock mass, to a broader role that encompasses many aspects of mining, which affects the cost of the end product. A new approach is proposed in this paper which facilitates this trend 'to treat non-homogeneous media (rock mass) in a non-homogeneous manner (an asymmetrical pattern) in order to achieve an optimal result (in terms of muckpile size distribution).' It is postulated there are no logical reasons (besides the current lack of means to infer rock mass properties in the blind zones of the bench and onsite precedents) for drilling a regular blast pattern over a rock mass that is inherently heterogeneous. Real and theoretical examples of such a method are presented.