Virtual reality exposure therapy: 150-degree screen to desktop PC

Virtual reality exposure therapy (VRET) developed using immersive or semi-immersive virtual environments present a usability problem for practitioners. To meet practitioner requirements for lower cost and portability VRET programs must often be ported onto desktop environments such as the personal computer (PC). However, success of VRET has been shown to be linked to presence, and the environment's ability to evoke the same reactions and emotions as a real experience. It is generally accepted that high-end virtual environments ( VEs) are more immersive than desktop PCs, but level of immersion does not always predict level of presence. This paper reports on the impact on presence of porting a therapeutic VR application for Schizophrenia from the initial research environment of a semi-immersive curved screen to PC. Presence in these two environments is measured both introspectively and across a number of causal factors thought to underlie the experience of presence. Results show that the VR exposure program successfully made users feel they were present in both platforms. While the desktop PC achieved higher scores on presence across causal factors participants reported they felt more present in the curved screen environment. While comparison of the two groups was statistically significant for the PQ but not for the IPQ, subjective reports of experiences in the environments should be considered in future research as the success of VRET relies heavily on the emotional response of patients to the therapeutic program.

Self-adaptive probabilistic roadmap generation for intelligent virtual agents

Agents inhabiting large scale environments are faced with the problem of generating maps by which they can navigate. One solution to this problem is to use probabilistic roadmaps which rely on selecting and connecting a set of points that describe the interconnectivity of free space. However, the time required to generate these maps can be prohibitive, and agents do not typically know the environment in advance. In this paper we show that the optimal combination of different point selection methods used to create the map is dependent on the environment, no point selection method dominates. This motivates a novel self-adaptive approach for an agent to combine several point selection methods. The success rate of our approach is comparable to the state of the art and the generation cost is substantially reduced. Self-adaptation therefore enables a more efficient use of the agent's resources. Results are presented for both a set of archetypal scenarios and large scale virtual environments based in Second Life, representing real locations in London.

Instrumento de avaliação de processos cognitivos para a aprendizagem de subestações de energia em ambientes 2D e realidade virtual

This study describes the development of a prototype to evaluate the potential of environments based on two-dimensional modeling and virtual reality as power substations learning objects into training environments from a central operation and control of power utility Cemig. Initially, there was an identification modeling features and cognitive processes in 2D and RV, from which it was possible to create frames that serve to guide the preparation of a checklist with assigning a metric weight for measuring cognitive potential learning in the study sites. From these contents twenty-four questions were prepared and each was assigned a weight that was used in the calculation of the metric; the questions were grouped into skill sets and similar cognitive processes called categories. Were then developed two distinct environments: the first, the prototype features an interactive checklist and your individual results. And, second, a system of data management environment for the configuration and editing of the prototype, and the observation and analysis of the survey results. For prototype validation, were invited to access the virtual checklist and answer it, five professionals linked to Cemig's training area. The results confirmed the validity of this instrument application to assess the possible potential of modeling in 2D and RV as learning objects in power substations, as well as provide feedback to developers of virtual environments to improve the system.

Individual differences and personality correlates of navigational performance in the virtual route learning task

Research on the mechanisms and processes underlying navigation has traditionally been limited by the practical problems of setting up and controlling navigation in a real-world setting. Thanks to advances in technology, a growing number of researchers are making use of computer-based virtual environments to draw inferences about real-world navigation. However, little research has been done on factors affecting human–computer interactions in navigation tasks. In this study female students completed a virtual route learning task and filled out a battery of questionnaires, which determined levels of computer experience, wayfinding anxiety, neuroticism, extraversion, psychoticism and immersive tendencies as well as their preference for a route or survey strategy. Scores on personality traits and individual differences were then correlated with the time taken to complete the navigation task, the length of path travelled,the velocity of the virtual walk and the number of errors. Navigation performance was significantly influenced by wayfinding anxiety, psychoticism, involvement and overall immersive tendencies and was improved in those participants who adopted a survey strategy. In other words, navigation in virtual environments is effected not only by navigational strategy, but also an individual’s personality, and other factors such as their level of experience with computers. An understanding of these differences is crucial before performance in virtual environments can be generalised to real-world navigational performance.

Implementación de una API para la interacción del guante P5 con entornos de realidad virtual desarrollados en Java y Java 3D

Este artículo presenta el proceso de implementación de una API (Application Programming Interface) que permite la interacción del guante P5 de Essential Reality1 con un entorno virtual desarrollado en el lenguaje de programación Java y su librería Java 3D.2 Por otra parte, se describe un ejemplo implementado, haciendo uso de la API en cuestión. Con base en este ejemplo se presentan los resultados de la ejecución de pruebas de requerimientos de recursos físicos como la CPU y memoria física. Finalmente, se especifican las conclusiones y resultados obtenidos.

e-Comunicação em espaço virtual

Relatório de estágio apresentado à Escola Superior de Educação do Instituto Politécnico de Santarém para obtenção do grau de mestre em Educação e Comunicação Multimédia

e-Comunicação em espaço virtual

Relatório de estágio apresentado à Escola Superior de Educação do Instituto Politécnico de Santarém para obtenção do grau de mestre em Educação e Comunicação Multimédia

O museu virtual Google Art Project : um estudo de caso em contexto de ensino-aprendizagem da educação visual

A educação na arte e pela arte confere a todos os seus intervenientes a estimulação da sua criatividade e da sua consciência cultural, proporcionando meios para se exprimirem e participarem ativamente no mundo que nos rodeia. A integração das tecnologias de informação e comunicação no processo de ensino-aprendizagem veio alargar o papel que a arte pode desempenhar neste processo, promovendo novas formas de aprender, de ensinar e de pensar. Assim, a utilização de ambientes virtuais em contexto educativo tem revelado um enorme potencial, sobretudo ao nível da comunicação e da interação entre alunos e obras de arte. Neste sentido, considerou-se importante desenvolver um estudo de caso em contexto de sala de aula da Educação Visual, promovendo uma aprendizagem baseada na articulação entre a observação, interpretação e análise da obra de arte e o museu virtual. Assim o principal objetivo deste estudo foi avaliar as potencialidades do Google Art Project, enquanto objeto de aprendizagem, na promoção da aprendizagem na área da literacia em artes. Para além disso, procurámos ainda avaliar se a utilização de ferramentas multimédia como o referido Google Art Project e o Quadro Interativo, constituem fatores de motivação na aprendizagem da disciplina de Educação Visual. Do ponto de vista metodológico desenvolvemos uma estratégia baseada na investigação-ação. Procurámos, por um lado, descobrir e compreender o significado de uma realidade vivida por um grupo de alunos e, por outro lado, refletir sobre a prática educativa com o intuito de a melhorar e transformar. Este estudo envolveu cinco turmas do sexto ano do ensino público. Para a recolha de dados utilizámos técnicas baseadas na conversação e na observação, no questionário e nas notas de campo. Os resultados deste estudo revelam que as ferramentas tecnológicas utilizadas podem efetivamente contribuir para a promoção da aprendizagem dos alunos na área da Educação Visual, mais concretamente ao nível do domínio da literacia artística, da representação e da interpretação visual.

Virtual knowledge brokering : describing the roles and strategies used by knowledge brokers in a pediatric physiotherapy virtual community of practice

Introduction: Knowledge transfer in pediatric rehabilitation is challenging and requires active, multifaceted strategies. The use of knowledge brokers (KBs) is one such strategy noted to promote clinician behavior change. The success of using KBs to transfer knowledge relies on their ability to adapt to ever-changing clinical contexts. In addition, with the rapid growth of online platforms as knowledge transfer forums, KBs must become effective in virtual environments. Although the role of KBs has been studied in various clinical contexts, their emerging role in specific online environments designed to support evidence-based behavior change has not yet been described. Our objective is to describe the roles of, and strategies used by, four KBs involved in a virtual community of practice to guide and inform future online KB interventions. Methods: A descriptive design guided this study and a thematic content analysis process was used to analyze online KB postings. The Promoting Action on Research in Health Sciences knowledge transfer framework and online andragogical learning theories assisted in the coding. A thematic map was created illustrating the links between KBs' strategies and emerging roles in the virtual environment. Results: We analyzed 95 posts and identified three roles: 1) context architect: promoting a respectful learning environment, 2) knowledge sharing promoter: building capacity, and 3) linkage creator: connecting research-to-practice. Strategies used by KBs reflected invitational, constructivism, and connectivism approaches, with roles and strategies changing over time. Discussion: This study increases our understanding of the actions of KBs in virtual contexts to foster uptake of research evidence in pediatric physiotherapy. Our results provide valuable information about the knowledge and skills required by individuals to fulfill this role in virtual environments.

Improving the management of building life cycle : a data mining approach

The construction industry has adapted information technology in its processes in terms of computer aided design and drafting, construction documentation and maintenance. The data generated within the construction industry has become increasingly overwhelming. Data mining is a sophisticated data search capability that uses classification algorithms to discover patterns and correlations within a large volume of data. This paper presents the selection and application of data mining techniques on maintenance data of buildings. The results of applying such techniques and potential benefits of utilising their results to identify useful patterns of knowledge and correlations to support decision making of improving the management of building life cycle are presented and discussed.

Developing Software Agents for Data Mining : [AIMM] Agents for Improving Maintenance Management

This report demonstrates the development of: • Development of software agents for data mining • Link data mining to building model in virtual environments • Link knowledge development with building model in virtual environments • Demonstration of software agents for data mining • Populate with maintenance data

Demonstration of Software Agents Prototype System : [AIMM] Agents for Improving Maintenance Management

This report presents the demonstration of software agents prototype system for improving maintenance management [AIMM] including: • Developing and implementing a user focused approach for mining the maintenance data of buildings. This report presents the demonstration of software agents prototype system for improving maintenance management [AIMM] including: • Developing and implementing a user focused approach for mining the maintenance data of buildings. • Refining the development of a multi agent system for data mining in virtual environments (Active Worlds) by developing and implementing a filtering agent on the results obtained from applying data mining techniques on the maintenance data. • Integrating the filtering agent within the multi agents system in an interactive networked multi-user 3D virtual environment. • Populating maintenance data and discovering new rules of knowledge.

Using data mining to improve building life cycle

The building life cycle process is complex and prone to fragmentation as it moves through its various stages. The number of participants, and the diversity, specialisation and isolation both in space and time of their activities, have dramatically increased over time. The data generated within the construction industry has become increasingly overwhelming. Most currently available computer tools for the building industry have offered productivity improvement in the transmission of graphical drawings and textual specifications, without addressing more fundamental changes in building life cycle management. Facility managers and building owners are primarily concerned with highlighting areas of existing or potential maintenance problems in order to be able to improve the building performance, satisfying occupants and minimising turnover especially the operational cost of maintenance. In doing so, they collect large amounts of data that is stored in the building’s maintenance database. The work described in this paper is targeted at adding value to the design and maintenance of buildings by turning maintenance data into information and knowledge. Data mining technology presents an opportunity to increase significantly the rate at which the volumes of data generated through the maintenance process can be turned into useful information. This can be done using classification algorithms to discover patterns and correlations within a large volume of data. This paper presents how and what data mining techniques can be applied on maintenance data of buildings to identify the impediments to better performance of building assets. It demonstrates what sorts of knowledge can be found in maintenance records. The benefits to the construction industry lie in turning passive data in databases into knowledge that can improve the efficiency of the maintenance process and of future designs that incorporate that maintenance knowledge.

Experimental methodology report

In architectural design and the construction industry, there is insufficient evidence about the way designers collaborate in their normal working environments using both traditional and digital media. It is this gap in empirical evidence that the CRC project, “Team Collaboration in High Bandwidth Virtual Environments” addresses. The project is primarily, but not exclusively, concerned with the conceptual stages of design carried out by professional designers working in different offices. The aim is to increase opportunities for communication and interaction between people in geographically distant locations in order to improve the quality of collaboration. In order to understand the practical implications of introducing new digital tools on working practices, research into how designers work collaboratively using both traditional and digital media is being undertaken. This will involve a series of empirical studies in the work places of the industry partners in the project. The studies of collaboration processes will provide empirical results that will lead to more effective use of virtual environments in design and construction processes. The report describes the research approach, the industry study, the methods for data collection and analysis and the foundation research methodologies. A distinctive aspect is that the research has been devised to enable field studies to be undertaken in a live industrial environment where the participant designers carry out real projects alongside their colleagues and in familiar locations. There are two basic research objectives: one is to obtain evidence about design practice that will inform the architecture and construction industries about the impact and potential benefit of using digital collaboration technologies; the second is to add to long term research knowledge of human cognitive and behavioural processes based on real world data. In order to achieve this, the research methods must be able to acquire a rich and heterogeneous set of data from design activities as they are carried out in the normal working environment. This places different demands upon the data collection and analysis methods to those of laboratory studies where controlled conditions are required. In order to address this, the research approach that has been adopted is ethnographic in nature and case study-based. The plan is to carry out a series of indepth studies in order to provide baseline results for future research across a wider community of user groups. An important objective has been to develop a methodology that will produce valid, significant and transferable results. The research will contribute to knowledge about how architectural design and the construction industry may benefit from the introduction of leading edge collaboration technologies. The outcomes will provide a sound foundation for the production of guidelines for the assessment of high bandwidth tools and their future deployment. The knowledge will form the basis for the specification of future collaboration products and collaboration processes. This project directly addresses the industry-identified focus on cultural change, image, e-project management, and innovative methods.