Efeito das técnicas de desinfecção sobre a dureza e rugosidade superficial dos materiais reembasadores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variação temporal do fitoplâncton e dos parâmetros hidrológicos da zona de arrebentação da Ilha Canela (Bragança, Pará, Brasil)

As variações sazonal e nictemeral do fitoplâncton e dos parâmetros hidrológicos foram estudadas em uma estação fixa (00º46'37.2"S-046º43'24.5"W) localizada na Ilha Canela (Bragança-Pará) em setembro e dezembro de 2004 e março e junho de 2005. Amostras subsuperficiais de água foram coletadas para os estudos qualitativos, quantitativos e para a determinação das concentrações de clorofila a. Simultaneamente, foram medidos os parâmetros físico-químicos da água: salinidade, temperatura, pH, oxigênio dissolvido e percentual de saturação. Foram identificados 64 táxons entre Cyanophyta (um táxon), Bacillariophyta (54 táxons) e Dinophyta (nove táxons). A concentração de clorofila a variou de 4,67 mg m^-3 (período seco) a 5,44 mg m^-3 (período chuvoso) e acompanhou a densidade fitoplanctônica, que foi mais elevada durante o período chuvoso (média=1.870 x 10³ cél L^-1). Os fitoflagelados dominaram quantitativamente o fitoplâncton local, seguidos pelas diatomáceas. Dimeregramma minor e Skeletonema sp. constituíram espécies muito freqüentes e muito abundantes. A ressuspensão de sedimentos provocadas pelos intensos ventos e a arrebentação das ondas favoreceram a dominância de D. minor durante o período seco. No período chuvoso, a elevada pluviometria, os moderados ventos, bem como a influência das águas estuarinas do Taperaçu e Caeté, propiciaram a redução da salinidade e o desenvolvimento de outras espécies fitoplanctônicas.

Microfitoplâncton de águas costeiras amazônicas: Ilha Canela (Bragança, PA, Brasil)

Variações sazonal e nictemeral do microfitoplâncton foram estudadas em uma estação fixa (00º46'37,2''S-046º43'24,5''W), localizada em uma área costeira próxima à ilha Canela (Norte do Brasil), durante os meses de setembro e dezembro/2004 (período seco) e março e junho/2005 (período chuvoso). As amostras destinadas à análise qualitativa do fitoplâncton foram obtidas a partir da filtragem de 400 L de água, através de uma rede planctônica (65 μm de abertura de malha), durante marés de sizígia, em intervalos regulares de três horas, por um período de 24 horas. O material coletado foi fixado com formol neutro a 4%. Paralelamente a essas coletas foi medida a salinidade da superfície da água. A salinidade apresentou variação significativa ao longo do período de estudo, variando entre 26,1 (junho/2005) e 39,0 (dezembro/2004), caracterizando o ambiente como eualino-polialino. Foram identificados 130 táxons incluídos nas divisões Cyanophyta (dois táxons), Bacillariophyta (115 táxons) e Dinophyta (13 táxons). As diatomáceas dominaram o microfitoplâncton da área, sendo Asterionellopsis glacialis, Dimeregramma minor, Skeletonema sp. e Thalassiosira subtilis os táxons mais freqüentes e abundantes. Os altos valores de salinidade condicionaram a maior representatividade das espécies marinhas neríticas, polialóbias. Os processos de ressuspensão provocados pelos ventos e arrebentação das ondas promoveram intercâmbios entre as populações planctônicas e ticoplanctônicas, dentre as quais as espécies Dimeregramma minor, Triceratium biquadratum e T. pentacrinus representaram novas ocorrências para as águas costeiras do litoral amazônico.

Caracterização quali-quantitativa do fitoplâncton da zona de arrebentação de uma praia amazônica

A estrutura da comunidade fitoplanctônica da praia da Princesa (Ilha de Maiandeua) foi estudada durante um ciclo nictemeral nos meses de novembro/08, março/09, junho/09 e setembro/09, de modo a verificar os efeitos de algumas variáveis ambientais sobre esta comunidade. O microfitoplâncton da praia da Princesa esteve representado por 98 táxons, com predomínio das diatomáceas, seguidas dos dinoflagelados e cianofíceas. Nas amostras qualitativas, Coscinodiscus perforatus Ehrenberg se destacou como abundante nos meses de março (45,6%) e junho (45,1%), enquanto que a análise quantitativa revelou Dimeregramma minor (Gregory) Ralfs como dominante, principalmente, em novembro (82,0%) e setembro (83,0%). A biomassa fitoplanctônica (clorofila-a) foi significativamente mais elevada em março (U= 0,0; p<0,05). Os valores médios de densidade fitoplanctônica total foram significativamente mais elevados no período chuvoso (F= 6,2; p<0,05), principalmente em junho (1223 ± 110 x 103 céls L-1). As curvas de K-dominância revelaram um declínio gradual na diversidade ao longo do período seco. A análise de ordenação (MDS) evidenciou a formação de três grupos, enquanto que a análise de componentes principais (PCA) mostrou a salinidade e a turbidez como as principais variáveis que definiram os componentes. A praia da Princesa é um ambiente dinâmico, onde os processos de ressuspensão promovem o intercâmbio entre populações fitoplanctônicas e fitobênticas. A elevada precipitação e o maior aporte fluvial, carreando elevadas concentrações de nutrientes, favoreceram o maior desenvolvimento do fitoplâncton, principalmente, durante o período chuvoso.

Desenvolvimento de aplicações Web com base em modelagem 3D: módulo Android

This project brings the development of an Android application which will allow users to access 3D models on web. The application developed allows Android devices to access web pages which have code that should use OPENGL to renderize. To demonstrate this functionality, an example web application was build, using technologies such as X3DOM and HTML5, which uses WebGL to get renderized. This web application gives to the user an environment of a virtual city, where he could surf by and interact with the objects. The Android application brings this immersion to the mobile world, also. The access and storage of data was developed a Webserver, which bring to the web application a simple API to give access to the database

Changes in phytoplankton composition in response to tides, wind-induced mixing conditions, and freshwater outflows in an urbanised estuarine complex

Recent reports have shown an increase in potentially harmful phytoplankton in Santos bay (Southeastern Brazilian Coast), located in a highly urbanised estuarine complex. Prediction of blooms is, thus, essential but the phytoplankton community structure in very dynamic regions is difficult to determine. In the present work, we discriminate bloom forming microphytoplankton dominance and their relationship to physical and meteorological variables to look for patterns observed in different tides and seasons. Comparing 8 distinct situations, we found five scenarios of dominance that could be related to winds, tides and rainfall: i) Surfers, diatoms occurring during high surf zone energies; ii) Sinkers, represented by larger celled diatoms during spring tide, after periods of high precipitation rates; iii) Opportunistic mixers, composed of chain forming diatoms with small or elongate cells occurring during neap tides; iv) Local mixers, microplanktonic diatoms and dinoflagellates which occurred throughout the 298 sampling stations; and v) Mixotrophic dinoflagellates, after intense estuarine discharges. Results suggest alterations in the temporal patterns for some bloom-forming species, while others appeared in abundances above safe limits for public health. This approach can also illustrate possible impacts of changes in freshwater discharge in highly urbanised estuaries.

Artificial Surfing Reefs per la difesa e riqualificazione della costa: ipotesi progettuale a Cattolica (RN)

Un artificial surfing reef (di seguito ASR) è un’importante opera che ha come obiettivo principe la riproduzione di onde e correnti ideali per eseguire il surf. Com’è noto, questo spettacolare sport si basa sul processo di frangimento delle onde che si propagano a riva. Ciò nonostante gli ASR possono servire come opere di difesa dall’erosione della spiaggia essendo in grado di smorzare sulla loro cresta l’energia ondosa. In questo lavoro di tesi si andrà ad analizzare quali parametri sono necessari per rendere uno paraggio fruibile dai surfers assieme ad una disamina degli effetti che un ASR può ingenerare sull’idrodinamica della costa, oltre a definire compiutamente i criteri di progettazione di un reef artificiale, basandoci su studi pregressi di progettisti e su evidenze sperimentali condotte su modelli fisici. Applicheremo tali criteri progettuali ad un caso pratico sulle coste emiliano - romagnole, nella provincia di Rimini laddove il fiume Conca sfocia in Adriatico. Ci baseremo su una progettazione di massima dell’ASR ed infine, anche sulla base di una sommaria analisi dei costi, valuteremo quale alternativa meglio si addica allo stato della costa e del litorale della regione.

Decay of imprinted surface waves in polymers

CONCLUSIONS The focus of this work was the investigation ofanomalies in Tg and dynamics at polymer surfaces. Thethermally induced decay of hot-embossed polymer gratings isstudied using laser-diffraction and atomic force microscopy(AFM). Monodisperse PMMA and PS are selected in the Mwranges of 4.2 to 65.0 kg/mol and 3.47 to 65.0 kg/mol,respectively. Two different modes of measurement were used:the one mode uses temperature ramps to obtain an estimate ofthe near-surface glass temperature, Tdec,0; the other modeinvestigates the dynamics at a constant temperature aboveTg. The temperature-ramp experiments reveal Tdec,0 valuesvery close to the Tg,bulk values, as determined bydifferential scanning calorimetry (DSC). The PMMA of65.0 kg/mol shows a decreased value of Tg, while the PS samples of 3.47 and 10.3 kg/mol (Mwsurface Tg. The transition widthbetween the onset of an amplitude reduction and a finalstate is smaller in the case of PS than in the case of PMMA.This suggests a higher degree of cooperation between thepolymer chains for PMMA than for PS chains even near thesurface. A reduction of the investigated near-surface region byusing smaller grating constants and AFM did not show achange in the near-surface Tdec,0. Decay experiments were performed at a variety ofconstant temperatures. Master plots are produced by shifting the decay curves, on the logarithmic time scale,with respect to a reference curve at Tref. From thisprocedure shift factors were extracted. An Arrhenius analysis of the shift factors reveals adecreasing non-Arrhenius (fragile) behavior with molecular weight for PMMA. PS is fragile for all Mw asexpected for linear polymers. Non-Arrhenius behavior allowsone to fit the shift factors to the William-Landel-Ferry(WLF) equation. The WLF parameters for the varying molecular weights ofPMMA and PS were extracted and compared to the values frombulk rheology measurements. Assuming cg1=16+/-2 at Tg, assuggested by Angell, the glass temperature was determinedfrom the dynamic decay experiments. Within the experimentalerrors, the values for Tg,surf(c1=16) and T_g,bulk(c1=16)tend to be smaller than Tdec,0 and Tg,bulk fromtemperature-ramp and DSC measurements, but confirm thecourse of the values with increasing Mw. The comparison of the fragilities (temperaturedependence of the polymer properties at Tg) near the surfaceand in the bulk shows a higher fragility for PS near thesurface, a lower one for PMMA with molecular weights of 4.2and 65.0 kg/mol. The different surface behavior of PS istraced back to a lower degree of cooperation and a largerfree volume fraction.

Study of a wind-wave numerical model and its integration with ocean and oil-spill numerical models

The ability to represent the transport and fate of an oil slick at the sea surface is a formidable task. By using an accurate numerical representation of oil evolution and movement in seawater, the possibility to asses and reduce the oil-spill pollution risk can be greatly improved. The blowing of the wind on the sea surface generates ocean waves, which give rise to transport of pollutants by wave-induced velocities that are known as Stokes’ Drift velocities. The Stokes’ Drift transport associated to a random gravity wave field is a function of the wave Energy Spectra that statistically fully describe it and that can be provided by a wave numerical model. Therefore, in order to perform an accurate numerical simulation of the oil motion in seawater, a coupling of the oil-spill model with a wave forecasting model is needed. In this Thesis work, the coupling of the MEDSLIK-II oil-spill numerical model with the SWAN wind-wave numerical model has been performed and tested. In order to improve the knowledge of the wind-wave model and its numerical performances, a preliminary sensitivity study to different SWAN model configuration has been carried out. The SWAN model results have been compared with the ISPRA directional buoys located at Venezia, Ancona and Monopoli and the best model settings have been detected. Then, high resolution currents provided by a relocatable model (SURF) have been used to force both the wave and the oil-spill models and its coupling with the SWAN model has been tested. The trajectories of four drifters have been simulated by using JONSWAP parametric spectra or SWAN directional-frequency energy output spectra and results have been compared with the real paths traveled by the drifters.

Kinetic modeling and experiments on gas uptake and chemical transformation of organic aerosol in the atmosphere

Aerosolpartikel beeinflussen das Klima durch Streuung und Absorption von Strahlung sowie als Nukleations-Kerne für Wolkentröpfchen und Eiskristalle. Darüber hinaus haben Aerosole einen starken Einfluss auf die Luftverschmutzung und die öffentliche Gesundheit. Gas-Partikel-Wechselwirkunge sind wichtige Prozesse, weil sie die physikalischen und chemischen Eigenschaften von Aerosolen wie Toxizität, Reaktivität, Hygroskopizität und optische Eigenschaften beeinflussen. Durch einen Mangel an experimentellen Daten und universellen Modellformalismen sind jedoch die Mechanismen und die Kinetik der Gasaufnahme und der chemischen Transformation organischer Aerosolpartikel unzureichend erfasst. Sowohl die chemische Transformation als auch die negativen gesundheitlichen Auswirkungen von toxischen und allergenen Aerosolpartikeln, wie Ruß, polyzyklische aromatische Kohlenwasserstoffe (PAK) und Proteine, sind bislang nicht gut verstanden.rn Kinetische Fluss-Modelle für Aerosoloberflächen- und Partikelbulk-Chemie wurden auf Basis des Pöschl-Rudich-Ammann-Formalismus für Gas-Partikel-Wechselwirkungen entwickelt. Zunächst wurde das kinetische Doppelschicht-Oberflächenmodell K2-SURF entwickelt, welches den Abbau von PAK auf Aerosolpartikeln in Gegenwart von Ozon, Stickstoffdioxid, Wasserdampf, Hydroxyl- und Nitrat-Radikalen beschreibt. Kompetitive Adsorption und chemische Transformation der Oberfläche führen zu einer stark nicht-linearen Abhängigkeit der Ozon-Aufnahme bezüglich Gaszusammensetzung. Unter atmosphärischen Bedingungen reicht die chemische Lebensdauer von PAK von wenigen Minuten auf Ruß, über mehrere Stunden auf organischen und anorganischen Feststoffen bis hin zu Tagen auf flüssigen Partikeln. rn Anschließend wurde das kinetische Mehrschichtenmodell KM-SUB entwickelt um die chemische Transformation organischer Aerosolpartikel zu beschreiben. KM-SUB ist in der Lage, Transportprozesse und chemische Reaktionen an der Oberfläche und im Bulk von Aerosol-partikeln explizit aufzulösen. Es erforder im Gegensatz zu früheren Modellen keine vereinfachenden Annahmen über stationäre Zustände und radiale Durchmischung. In Kombination mit Literaturdaten und neuen experimentellen Ergebnissen wurde KM-SUB eingesetzt, um die Effekte von Grenzflächen- und Bulk-Transportprozessen auf die Ozonolyse und Nitrierung von Protein-Makromolekülen, Ölsäure, und verwandten organischen Ver¬bin-dungen aufzuklären. Die in dieser Studie entwickelten kinetischen Modelle sollen als Basis für die Entwicklung eines detaillierten Mechanismus für Aerosolchemie dienen sowie für das Herleiten von vereinfachten, jedoch realistischen Parametrisierungen für großskalige globale Atmosphären- und Klima-Modelle. rn Die in dieser Studie durchgeführten Experimente und Modellrechnungen liefern Beweise für die Bildung langlebiger reaktiver Sauerstoff-Intermediate (ROI) in der heterogenen Reaktion von Ozon mit Aerosolpartikeln. Die chemische Lebensdauer dieser Zwischenformen beträgt mehr als 100 s, deutlich länger als die Oberflächen-Verweilzeit von molekularem O3 (~10-9 s). Die ROIs erklären scheinbare Diskrepanzen zwischen früheren quantenmechanischen Berechnungen und kinetischen Experimenten. Sie spielen eine Schlüsselrolle in der chemischen Transformation sowie in den negativen Gesundheitseffekten von toxischen und allergenen Feinstaubkomponenten, wie Ruß, PAK und Proteine. ROIs sind vermutlich auch an der Zersetzung von Ozon auf mineralischem Staub und an der Bildung sowie am Wachstum von sekundären organischen Aerosolen beteiligt. Darüber hinaus bilden ROIs eine Verbindung zwischen atmosphärischen und biosphärischen Mehrphasenprozessen (chemische und biologische Alterung).rn Organische Verbindungen können als amorpher Feststoff oder in einem halbfesten Zustand vorliegen, der die Geschwindigkeit von heterogenen Reaktionenen und Mehrphasenprozessen in Aerosolen beeinflusst. Strömungsrohr-Experimente zeigen, dass die Ozonaufnahme und die oxidative Alterung von amorphen Proteinen durch Bulk-Diffusion kinetisch limitiert sind. Die reaktive Gasaufnahme zeigt eine deutliche Zunahme mit zunehmender Luftfeuchte, was durch eine Verringerung der Viskosität zu erklären ist, bedingt durch einen Phasenübergang der amorphen organischen Matrix von einem glasartigen zu einem halbfesten Zustand (feuchtigkeitsinduzierter Phasenübergang). Die chemische Lebensdauer reaktiver Verbindungen in organischen Partikeln kann von Sekunden bis zu Tagen ansteigen, da die Diffusionsrate in der halbfesten Phase bei niedriger Temperatur oder geringer Luftfeuchte um Größenordnungen absinken kann. Die Ergebnisse dieser Studie zeigen wie halbfeste Phasen die Auswirkung organischeer Aerosole auf Luftqualität, Gesundheit und Klima beeinflussen können. rn

Applicazioni di realtà aumentata in ambito museale

La realtà aumentata, unitamente a quella mista, stanno rapidamente prendendo pieno all'interno di molti aspetti della vita umana. Scopo di questo lavoro è di analizzare tecnologie e tecniche esistenti al fine di applicarle ad un caso reale, la rilevazione e la sovrapposizione di un oggetto digitale tridimensionale ad uno presente in un museo.

Extrinsic causes of erosion. Biological factors

Biological factors such as saliva, acquired dental pellicle, tooth structure and positioning in relation to soft tissues and tongue are related to dental erosion development. Saliva has been shown to be the most important biological factor in the prevention of dental erosion. It starts acting even before the acid attack, with the increase of the salivary flow rate as a response to the acidic stimuli. This creates a favorable scenario, increasing the buffering system of saliva and effectively diluting and clearing acids on dental surfaces during the erosive challenge. Saliva plays a role in the formation of the acquired dental pellicle, which acts as a perm-selective membrane preventing contact of the acid with the tooth surf aces. The protective level of the pellicle seems to be regulated by its composition, thickness and maturation time. Due to its mineral content, saliva can also prevent demineralization as well as enhance remineralization. However, these preventive and reparative factors of saliva may not be enough against highly erosive challenges, leading to erosion development. The progress rate of erosion can be significantly influenced by the type of dental substrate, occurrence of mechanical and chemical attacks, fluoride exposure, and also by contact with the oral soft tissues and tongue.