Mode of operation and low-resolution structure of a multi-domain and hyperthermophilic endo-beta-1,3-glucanase from Thermotoga petrophila

1,3-beta-Glucan depolymerizing enzymes have considerable biotechnological applications including biofuel production, feedstock-chemicals and pharmaceuticals. Here we describe a comprehensive functional characterization and low-resolution structure of a hyperthermophilic laminarinase from Thermotoga petrophila (TpLam). We determine TpLam enzymatic mode of operation, which specifically cleaves internal beta-1,3-glucosidic bonds. The enzyme most frequently attacks the bond between the 3rd and 4th residue from the non-reducing end, producing glucose, laminaribiose and laminaritriose as major products. Far-UV circular dichroism demonstrates that TpLam is formed mainly by beta structural elements, and the secondary structure is maintained after incubation at 90 degrees C. The structure resolved by small angle X-ray scattering, reveals a multi-domain structural architecture of a V-shape envelope with a catalytic domain flanked by two carbohydrate-binding modules. Crown Copyright (C) 2011 Published by Elsevier Inc. All rights reserved.

DMSO-Induced Denaturation of Hen Egg White Lysozyme

We report on the size, shape, structure, and interactions of lysozyme in the ternary system lysozyme/DMSO/water at low protein concentrations. Three structural regimes have been identified, which we term the ""folded"" (0 < phi(DMSO) < 0.7), ""unfolded"" (0.7 <= phi(DMSO) < 0.9), and ""partially collapsed"" (0.9 <= phi(DMSO) < 1.0) regime. Lysozyme resides in a folded conformation with an average radius of gyration of 1.3 +/- 0.1 nm for phi(DMSO) < 0.7 and unfolds (average R(g) of 2.4 +/- 0.1 nm) above phi(DMSO) > 0.7. This drastic change in the protein`s size coincides with a loss of the characteristic tertiary structure. It is preceded by a compaction of the local environment of the tryptophan residues and accompanied by a large increase in the protein`s overall flexibility. In terms of secondary structure, there is a gradual loss of alpha-helix and concomitant increase of beta-sheet structural elements toward phi(DMSO) = 0.7, while an increase in phi(DMSO) at even higher DMSO volume fractions reduces the presence of both a-helix and beta-sheet secondary structural elements. Protein-protein interactions remain overall repulsive for all values of phi(DMSO) An attempt is made to relate these structural changes to the three most important physical mechanisms that underlie them: the DMSO/water microstructure is strongly dependent on the DMSO volume fraction, DMSO acts as a strong H-bond acceptor, and DMSO is a bad solvent for the protein backbone and a number of relatively polar side groups, but a good solvent for relatively apolar side groups, such as tryptophan.

Literatura infantil : uma abordagem das qualidades sensíveis e inteligíveis da leitura imagética na escola

Esta dissertação discute a leitura de textos imagéticos a partir da perspectiva da educação e da semiótica visual, tratando das articulações e relações entre os elementos constitutivos da imagem em livros de literatura infantil sem texto verbal. A investigação busca revelar, na complexidade das relações existentes entre elementos estruturantes das imagens nos livros O caminho do caracol e Cena de rua, o sentido que se inscreve no texto e a possibilidade da sua leitura no meio escolar. As obras literárias para a infância veiculam a linguagem visual em junção com a verbal e propiciam experiências sensíveis e inteligíveis. A partir da teoria semiótica greimasiana, aplicando instrumentos de análise do percurso gerativo de sentido, a pesquisa demonstra que o texto imagético é estruturado por diferentes níveis de complexidade, impondo um modo de ler específico. A identificação, descrição, classificação, bem como as relações entre as categorias, nas suas dimensões cromática, eidética e topológica, levam à constatação que as qualidades plásticas da imagem organizam sistemas de linguagem, reunindo solidariamente o plano da expressão e do conteúdo, criam estruturas e geram efeitos de sentido. A imagem, então, constitui-se como objeto de significação e a ilustração presente no livro de literatura infantil, ao ser tratada como texto lisível, torna-se objeto de leitura. A complexidade desse tipo de texto aponta a necessidade da formação específica de professores para explorar a leitura escolar das linguagens visuais.

Descrição da vida escolar em romances brasileiros

A vida escolar em internatos, ret.] a;;ada nos ro mances brasileiros: O Ateneu, de F.~ul Pompéiai c Uoidinho, ãe José Lins do Rego i Balão Cativo e chão de Ferro, de Pedro Navai e A Rede, de Martha Antiero, é reinterpretada numa busca das relações socio-educacionaiD descLitas nos trabalhos de criação. A procura de retençao dos elementos estruturais estabelecidos na escola é feita através de cor relação e oposição dos textos selecionados, onde suas peE sonagens atuarão corno "informantes" e teorias filosofico- -sociais sobre Educação, corno elementos de integração e crItica. Da constatação de que o sistema educacional está baseado, em sua essência, numa relação de subordinação/do minação entre a geração precedente e aquela que a segue quando há comunicação pedagógica, o sistema escolar foi se parado e analisado dentro de dois subsistemas distintos, segundo a situação de seus elementos de subordinados e/ou dominantes, denominados, os dois mundos, de "Colegiatura" e "Equipe Pedagógica". Compreendendo que a escola é, por sua vez, um ~ubsistema que faz parte do sistema maior, a sociedade, foi estabelecido, introdutoriamente a cada des crição das escolas, um esboço sobre a influência do social no estabelecimento escolar, onde o colegial é separado da influência doméstica para o preparo ao domínio social da rua.

Escola de desenvolvimento social do estado de São Paulo - EDESP – oportunidades e desafios para tornar-se referência como escola de governo da assistência social

Entre os desafios para a implementação da política de desenvolvimento social do Brasil, muito tem sido discutido acerca das dificuldades de capacitação dos profissionais que diariamente executam ações que traduzem esta política. Parte da dificuldade é decorrente das transformações ocorridas nas últimas décadas nas Políticas Públicas de Assistência Social no país e no entendimento destas novas demandas. O Brasil está transformando a sua antiga política assistencialista na do direito social. A capacitação e a garantia da educação continuada e da educação permanente são elementos fundamentais e estruturantes para a consolidação deste novo projeto de política social. Neste sentido, a criação de uma escola de governo no Estado de São Paulo, com a perspectiva de capacitação e educação continuada dos profissionais envolvidos na prestação de serviços socioassistenciais, vem colaborar com a formação dos atores sociais (servidores e prestadores de serviço), capazes de executar e aprimorar as políticas sociais regionais e do SUAS, de forma transversal e multidisciplinar, visando garantir o direito e o acesso a bens e serviços aos cidadãos e grupos em situação de vulnerabilidade e risco social e pessoal. Este trabalho busca resgatar o contexto e as motivações que levaram à criação da Escola de Desenvolvimento Social do Estado de São Paulo (EDESP), sua história e as expectativas em torno dela, permitindo, a partir de experiências em outras escolas de governo e referenciais de boas práticas, elencar alguns pontos para reflexão.

O projeto de arquitetura de espaços temporários com o uso de sistema construtivo remontável: um estudo exploratório

The purpose of this research is to study the portable or reassemblable architectures, which, different from conventional architecture (whose designs are of permanent buildings), corresponds to the designing of spaces with temporary purposes. The focus of the study is the architectural design of spaces that are produced from building systems that can to be moved to different places (process of assembly / disassembly / reassembly) in order to identify the types of spaces generated and the processes used in their design / projecting. The aim is to investigate relationships between the initial project conceived based on a Reassemblable Construction System (RCS) and its application in the architectural design of professionals and students in order to contribute to the understanding of the specificities of this type of design activity. To this end it was developed the exploratory research based on multimedia methods, which includes: documentary analysis, technical visits, interviews, surveys, academic exercise and documentation by images. Although the study is not conclusive, the results indicate significant differences between the point of view of the RCS´s designers and its users (architects and architecture students) since the users demonstrated to have some difficulty to access the features provided for the first group, in particular the students. It is also demonstrated that the use of RCSs seems to change the appreciation / hierarchization of the conditions of project design, since, unlike what happens in traditional architectural design, the designers who use them seem to be more concerned with constructive issues, especially the structural elements (support and covering), instead of functionality, aesthetics and even physical characteristics of the site

Casas modernas na orla marítima de João Pessoa 1960 a 1974

This paper studies modern houses built in the neighborhoods of Cabo Branco, Tambaú and Manaíra by the seafront in Joao Pessoa, built between 1960 and 1974. We start from the already widespread notion that Brazilian Modern Architecture was inspired by foreign ways, mainly European but also American here recast, adapted, often innovating repertoire and ideas received (Y. BRUAND, 2005; H. SEGAWA, 2002; C. E. COMAS, 2002; C. E. COMAS, 2002; M. M. ACAYABA e S. FICHER, 1982; M. B. C. ARANHA, 2008; F. C. L. LARA, 2001; R. V. ZEIN, 2005; L. E. AMORIM, 1999, C. V. STINCO, 2010). With this look, after a field study, we collected 61 specimens in the collection of the Central Archive of João Pessoa City Hall, in order to identify which reformulations, adaptations or innovations would exist in modern houses built along the coast in João Pessoa. As we try to analyze the houses by what the bibliography had suggested (G. C. ARGAN, 1992; L. CORBUSIER, 2002; C.E.D. e M. ADRIÀ, 2007; K. FRAMPTON, 1997; H. H. HITCHCOCK, 1976; L. BENEVOLO, 2004; R. DE FUSCO, 1992, N . PEVSNER, 2002; M. RAGON, 1986; B. RISEBERO, 1982; E. ROBBINS, 1997; W. J. R. CURTIS, 1982; V. SCULLY, 2003; B. ZEVI, 1984; D. DUNST, 1999; A. COLQUHOUN, 2002; R. WESTON, 2005; A. IÑAKI, 2006; J. PETER, 1994) the starting idea seemed to us not sufficiently developed. So we decided, first, to undertake a literature review comparing speech and image of modern houses most often cited by international and national literature, following a script freely inspired the Vitruvian triad: the functional and spatial (sectorization, guidance, spatiality, movement); constructive aspects (structural elements, modulation, deck, sealing), and aesthetic aspects (composition, apertures, ornaments) (Cap.1), then cast a look under this same route in 61 specimens obtained initially, trying to verify any specificities they would have (Cap.2). Failing to deepen the analysis of all these examples, we chose 10 projects which were redesigned and described in more detail to which we supplement with the aspects of place - location / lot location, access, axiality. (E. C. MAHFUZ, 2002; J. C. MIGUEL, 2000; E. C. CHEREGATI, 2007; M. COTRIM, 2007). (Cap. 3). The documentation and description resulting allowed us to approach some related questions about the canonical transcripts hybridizing, adoptions and any vernacular innovations of modern houses along the coast, We conclude that the appellants and anachronistic elements isolates found in each of the studied bind to the Brazilian Modern Architecture

Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Purification, characterization, crystallization and theoretical molecular modeling of gyroxin fraction from Crotalus durissus terrificus venom (Laurenti, 1768)

The venom of Crotalus durissus terrificus snakes presents various substances, including a serine protease with thrombin-like activity, called gyroxin, that clots plasmatic fibrinogen and promote the fibrin formation. The aim of this study was to purify and structurally characterize the gyroxin enzyme from Crotalus durissus terrificus venom. For isolation and purification, the following methods were employed: gel filtration on Sephadex G75 column and affinity chromatography on benzamidine Sepharose 6B; 12% SDS-PAGE under reducing conditions; N-terminal sequence analysis; cDNA cloning and expression through RT-PCR and crystallization tests. Theoretical molecular modeling was performed using bioinformatics tools based on comparative analysis of other serine proteases deposited in the NCBI (National Center for Biotechnology Information) database. Protein N-terminal sequencing produced a single chain with a molecular mass of similar to 30 kDa while its full-length cDNA had 714 bp which encoded a mature protein containing 238 amino acids. Crystals were obtained from the solutions 2 and 5 of the Crystal Screen Kit (R), two and one respectively, that reveal the protein constitution of the sample. For multiple sequence alignments of gyroxin-like B2.1 with six other serine proteases obtained from snake venoms (SVSPs), the preservation of cysteine residues and their main structural elements (alpha-helices, beta-barrel and loops) was indicated. The localization of the catalytic triad in His57, Asp102 and Ser198 as well as S1 and S2 specific activity sites in Thr193 and Gli215 amino acids was pointed. The area of recognition and cleavage of fibrinogen in SVSPs for modeling gyroxin B2.1 sequence was located at Arg60, Arg72, Gln75, Arg81, Arg82, Lis85, Glu86 and Lis87 residues. Theoretical modeling of gyroxin fraction generated a classical structure consisting of two alpha-helices, two beta-barrel structures, five disulfide bridges and loops in positions 37, 60, 70, 99, 148, 174 and 218. These results provided information about the functional structure of gyroxin allowing its application in the design of new drugs.

Vivência do enfermeiro no cuidado humano na Unidade de Terapia Intensiva adulto

The purpose of the study was to understand the nurse s experience with human care in the Adult Intensive Care Unit (ICU). The objective was to describe the nurse s experience in caring for patients in the ICU and to analyze the nurse s perception of the care provided. The study is a descriptive inquiry of qualitative nature with a phenomenological approach. We interviewed eight nurses, 26 and 43 years of age, that provide care in the ICU of a private hospital in Natal/RN, during the manths of July and August of 2006. We analyzed the data acording to the method of Colaizzi. Four categories emerged from the data: The search for the maintenance of life, The technicalbureaucratic activities, The recognition of the patient s individuality, and the expression of the nurse s feelings.The analysis allowed us to describe the lived experience of the nurse s care the ICU and to comprehend the structural elements of this experience. The results showed that the nurse s experience presents itself as a process of the several actions and feelings that occur while the social relations between the patient and the nurse develop. Finally, we understand that although the study shows an experience based on a biological model of health, these nurses possess an initial idea on how to reach humanized care in its essence, needing, however, of an institutional policy that favors this practice, an educational formation that prepares her to recognize her field of work as a place of continuous learning and an understanding of the health model as an ally in the search of humanized care

Avaliação de concreto com adição de fibras de PET submetido a altas temperaturas

The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element

Modelagem numérica de estruturas de contenção atirantadas em areia

A numerical study on the behavior of tied-back retaining walls in sand, using the finite element method (FEM) is presented. The analyses were performed using the software Plaxis 2D, and were focused on the development of horizontal displacements, horizontal stresses, shear forces and bending moments in the structure during the construction process. Emphasis was placed on the evaluation of wall embedment, tie-back horizontal spacing, wall thickness, and free anchor length on wall behavior. A representative soil profile of a specific region at the City of Natal, Brazil, was used in the numerical analyses. New facilities built on this region often include retaining structures of the same type studied herein. Soil behavior was modeled using the Mohr-Coulomb constitutive model, whereas the structural elements were modeled using the linear elastic model. Shear strength parameters of the soil layers were obtained from direct shear test results conducted with samples collected at the studied site. Deformation parameters were obtained from empirical correlations from SPT test results carried out on the studied site. The results of the numerical analyses revealed that the effect of wall embedment on the investigated parameters is virtually negligible. Conversely, the tie-back horizontal spacing plays an important role on the investigated parameters. The results also demonstrated that the wall thickness significantly affects the wall horizontal displacements, and the shear forces and bending moments within the retaining structure. However, wall thickness was not found to influence horizontal stresses in the structure

Compósitos híbridos: desenvolvimento de configuração e efeitos de umidificação

The advantage in using vegetable fibres in place of synthetic fibres such as glass fibre, for reinforcements in composites are: biodegradability, low cost, low density, good tenacity, good thermal properties, low energy content and reduced use of instruments for its treatment or processing. Even though, problems related to low mechanical performance of some of the natural fibres, has caused difficulty in their direct application in structural elements. The use of alternative materials like hybrid composites has been encouraged, thus trying to better the structural performance of the composites with natural fibres. This work presents a comparative study of the strength and stiffness of hybrid composites with orthopthalic polyester matrix reinforced with E-fibre glass, jute and curauá. The experimental part includes uniaxial tension and three point bending tests to determine the mechanical properties of the final product. The hybrid composite was manufactured in a local industry and was in the form of laminates. All the samples were projected to withstand the possible structural applications as reservoirs and pipes. CH (laminated hybrid composite with glass and curauá fibres). The results obtained show clearly the influence of the hybridization in all the types tested and indicate a good mechanical performance of the composite with glass/curauá fibres in relation to the composite with glass fibres. Aspects in relation to the interfaces glass/curauá composites besides the fracture characteristics for all loading types were also analysed

Efeitos do envelhecimento ambiental acelerado em compósitos poliméricos

The advantages of the use of vegetable fibers on the synthetic fibers, such as glass fibers, in the reinforcements in composites are: low cost, low density, good tenacity, good thermal properties and reduced use of instruments for their treatment or processing. However, problems related to poor performance of some mechanical natural fibers, have hindered its direct use in structural elements. In this sense, the emergence of alternative materials such as hybrids composites, involving natural and synthetic fibers, has been encouraged by seeking to improve the performance of structural composites based only on natural fibers. The differences between the physical, chemical and mechanical properties of these fibers, especially facing the adverse environmental conditions such as the presence of moisture and ultraviolet radiation, is also becoming a concern in the final response of these composites. This piece of research presents a comparative study of the strength and stiffness between two composite, both of ortoftalic polyester matrix, one reinforced with fibers of glass-E (CV) and other hybrid reinforced with natural fibers of curauá and fiberglass-E (CH). All the comparative study is based on the influence of exposure to UV rays and steam heated water in composites, simulating the aging environment. The conditions for the tests are accelerated through the use of the aging chamber. The composites will be evaluated through tests of uniaxial static mechanical traction and bending on three points. The composite of glass fiber and hybrid manufacturing industry are using the rolling manual (hand lay-up) and have been developed in the form of composites. All were designed to meet possible structural applications such as tanks and pipes. The reinforcements used in composites were in the forms of short fiber glass-E quilts (450g/m2 - 5cm) of continuous wires and fuses (whose title was of 0.9 dtex) for the curauá fibers. The results clearly show the influence of aging on the environmental mechanical performance of the composite CV and CH. The issues concerning the final characteristics of the fracture for all types of cargoes studied were also analyzed

Laminados compósitos de PRFV: efeitos da descontinuidade geométrica e do envelhecimento ambiental acelerado

The growing demand in the use of composite materials necessitates a better understanding of its behavior related to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. Within these project conditions are highlighted the presence of geometrical discontinuities in the area of cross and longitudinal sections of structural elements and environmental conditions of work like UV radiation, moisture, heat, leading to a decrease in final mechanical response of the material. In this sense, this thesis aims to develop studies detailed (experimental and semi-empirical models) the effects caused by the presence of geometric discontinuity, more specifically, a central hole in the longitudinal section (with reduced cross section) and the influence of accelerated environmental aging on the mechanical properties and fracture mechanism of FGRP composite laminates under the action of uniaxial tensile loads. Studies on morphological behavior and structural degradation of composite laminates are performed by macroscopic and microscopic analysis of affected surfaces, in addition to evaluation by the Measurement technique for mass variation (TMVM). The accelerated environmental aging conditions are simulated by aging chamber. To study the simultaneous influence of aging/geometric discontinuity in the mechanical properties of composite laminates, a semiempirical model is proposed and called IE/FCPM Model. For the stress concentration due to the central hole, an analisys by failures criteria were performed by Average-Stress Criterion (ASC) and Point-Stress Criterion (PSC). Two polymeric composite laminates, manufactured industrially were studied: the first is only reinforced by short mats of fiberglass-E (LM) and the second where the reinforced by glass fiber/E comes in the form of bidirectional fabric (LT). In the conception configurations of laminates the anisotropy is crucial to the final mechanical response of the same. Finally, a comparative study of all parameters was performed for a better understanding of the results. How conclusive study, the characteristics of the final fracture of the laminate under all conditions that they were subjected, were analyzed. These analyzes were made at the macroscopic level (scanner) microscope (optical and scanning electron). At the end of the analyzes, it was observed that the degradation process occurs similarly for each composite researched, however, the LM composite compared to composite LT (configurations LT 0/90º and LT ±45º) proved to be more susceptible to loss of mechanical properties in both regarding with the central hole as well to accelerated environmental aging