Admission blood glucose is an independent predictive factor for hospital mortality in polytraumatised patients

PURPOSE: The goal of this study was to analyse a possible association of admission blood glucose with hospital mortality of polytraumatised patients and to develop an outcome prediction model for this patient group. METHODS: The outcome of adult polytraumatised patients admitted to the University Hospital of Berne, Switzerland, between 2002 and 2004 with an ISS > or = 17, and more than one severely injured organ system was retrospectively analysed. RESULTS: The inclusion criteria were met by 555 patients, of which 108 (19.5%) died. Hyperglycaemia proved to be an independent predictor for hospital mortality (P < 0.0001), following multiple regression analysis. After inclusion of admission blood glucose, the calculated mortality prediction model performed better than currently described models (P < 0.0001, AUC 0.924). CONCLUSION: In this retrospective, single-centre study in polytraumatised patients, admission blood glucose proved to be an independent predictor of hospital mortality following regression analysis controlling for age, gender, injury severity and other laboratory parameters. A reliable admission blood glucose-based mortality prediction model for polytraumatised patients could be established. This observation may be helpful in improving the precision of future outcome prediction models for polytraumatised patients. These observations warrant further prospective evaluation.

Evaluation of the benefit of emergency vaccination in a foot-and-mouth disease free country with low livestock density

Foot-and-mouth disease (FMD) is highly contagious and one of the most economically devastating diseases of cloven-hoofed animals. Scientific-based preparedness about how to best control the disease in a previously FMD-free country is therefore essential for veterinary services. The present study used a spatial, stochastic epidemic simulation model to compare the effectiveness of emergency vaccination with conventional (non-vaccination) control measures in Switzerland, a low-livestock density country. Model results revealed that emergency vaccination with a radius of 3 km or 10 km around infected premises (IP) did not significantly reduce either the cumulative herd incidence or epidemic duration if started in a small epidemic situation where the number of IPs is still low. However, in a situation where the epidemic has become extensive, both the cumulative herd incidence and epidemic duration are reduced significantly if vaccination were implemented with a radius of 10 km around IPs. The effect of different levels of conventional strategy measures was also explored for the non-vaccination strategy. It was found that a lower compliance level of farmers for movement restrictions and delayed culling of IPs significantly increased both the cumulative IP incidence and epidemic duration. Contingency management should therefore focus mainly on improving conventional strategies, by increasing disease awareness and communication with stakeholders and preparedness of culling teams in countries with a livestock structure similar to Switzerland; however, emergency vaccination should be considered if there are reasons to believe that the epidemic may become extensive, such as when disease detection has been delayed and many IPs are discovered at the beginning of the epidemic.

Genetic variants in SLC22A17 and SLC22A7 are associated with anthracycline-induced cardiotoxicity in children

AIM To identify novel variants associated with anthracycline-induced cardiotoxicity and to assess these in a genotype-guided risk prediction model. PATIENTS & METHODS Two cohorts treated for childhood cancer (n = 344 and 218, respectively) were genotyped for 4578 SNPs in drug ADME and toxicity genes. RESULTS Significant associations were identified in SLC22A17 (rs4982753; p = 0.0078) and SLC22A7 (rs4149178; p = 0.0034), with replication in the second cohort (p = 0.0071 and 0.047, respectively). Additional evidence was found for SULT2B1 and several genes related to oxidative stress. Adding the SLC22 variants to the prediction model improved its discriminative ability (AUC 0.78 vs 0.75 [p = 0.029]). CONCLUSION Two novel variants in SLC22A17 and SLC22A7 were significantly associated with anthracycline-induced cardiotoxicity and improved a genotype-guided risk prediction model, which could improve patient risk stratification.

Twelve-month psychosis-predictive value of the ultra-high risk criteria in children and adolescents

Objective The validity of current ultra-high risk (UHR) criteria is under-examined in help-seeking minors, particularly, in children below the age of 12 years. Thus, the present study investigated predictors of one-year outcome in children and adolescents (CAD) with UHR status. Method Thirty-five children and adolescents (age 9–17 years) meeting UHR criteria according to the Structured Interview for Psychosis-Risk Syndromes were followed-up for 12 months. Regression analyses were employed to detect baseline predictors of conversion to psychosis and of outcome of non-converters (remission and persistence of UHR versus conversion). Results At one-year follow-up, 20% of patients had developed schizophrenia, 25.7% had remitted from their UHR status that, consequently, had persisted in 54.3%. No patient had fully remitted from mental disorders, even if UHR status was not maintained. Conversion was best predicted by any transient psychotic symptom and a disorganized communication score. No prediction model for outcome beyond conversion was identified. Conclusions Our findings provide the first evidence for the predictive utility of UHR criteria in CAD in terms of brief intermittent psychotic symptoms (BIPS) when accompanied by signs of cognitive impairment, i.e. disorganized communication. However, because attenuated psychotic symptoms (APS) related to thought content and perception were indicative of non-conversion at 1-year follow-up, their use in early detection of psychosis in CAD needs further study. Overall, the need for more in-depth studies into developmental peculiarities in the early detection and treatment of psychoses with an onset of illness in childhood and early adolescence was further highlighted.

Normal Thyroid Function and the Risk of Atrial Fibrillation: the Rotterdam Study

CONTEXT Hyperthyroidism is an established risk factor for atrial fibrillation (AF), but information concerning the association with variations within the normal range of thyroid function and subgroups at risk is lacking. OBJECTIVE This study aimed to investigate the association between normal thyroid function and AF prospectively and explore potential differential risk patterns. DESIGN, SETTING, AND PARTICIPANTS From the Rotterdam Study we included 9166 participants ≥ 45 y with TSH and/or free T4 (FT4) measurements and AF assessment (1997-2012 median followup, 6.8 y), with 399 prevalent and 403 incident AF cases. MAIN OUTCOME MEASURES Outcome measures were 3-fold: 1) hazard ratios (HRs) for the risk of incident AF by Cox proportional-hazards models, 2) 10-year absolute risks taking competing risk of death into account, and 3) discrimination ability of adding FT4 to the CHARGE-AF simple model, an established prediction model for AF. RESULTS Higher FT4 levels were associated with higher risks of AF (HR 1.63, 95% confidence interval, 1.19-2.22), when comparing those in the highest quartile to those in lowest quartile. Absolute 10-year risks increased with higher FT4 in participants ≤ 65 y from 1-9% and from 6-12% in subjects ≥ 65 y. Discrimination of the prediction model improved when adding FT4 to the simple model (c-statistic, 0.722 vs 0.729; P = .039). TSH levels were not associated with AF. CONCLUSIONS There is an increased risk of AF with higher FT4 levels within the normal range, especially in younger subjects. Adding FT4 to the simple model slightly improved discrimination of risk prediction.

An analysis of two methods for the classification of stage of readiness to obtain repeat mammography screening

Background and purpose: Breast cancer continues to be a health problem for women, representing 28 percent of all female cancers and remaining one of the leading causes of death for women. Breast cancer incidence rates become substantial before the age of 50. After menopause, breast cancer incidence rates continue to increase with age creating a long-lasting source of concern (Harris et al., 1992). Mammography, a technique for the detection of breast tumors in their nonpalpable stage when they are most curable, has taken on considerable importance as a public health measure. The lifetime risk of breast cancer is approximately 1 in 9 and occurs over many decades. Recommendations are that screening be periodic in order to detect cancer at early stages. These recommendations, largely, are not followed. Not only are most women not getting regular mammograms, but this circumstance is particularly the case among older women where regular mammography has been proven to reduce mortality by approximately 30 percent. The purpose of this project was to increase our understanding of factors that are associated with stage of readiness to obtain subsequent mammograms. A secondary purpose of this research was to suggest further conceptual considerations toward the extension of the Transtheoretical Model (TTM) of behavior change to repeat screening mammography. ^ Methods. A sample (n = 1,222) of women 50 years and older in a large multi-specialty clinic in Houston, Texas was surveyed by mail questionnaire regarding their previous screening experience and stage of readiness to obtain repeat screening. A computerized database, maintained on all women who undergo mammography at the clinic, was used to identify women who are eligible for the project. The major statistical technique employed to select the significant variables and to examine the man and interaction effects of independent variables on dependent variables was polychotomous stepwise, logistic regression. A prediction model for each stage of readiness definition was estimated. The expected probabilities for stage of readiness were calculated to assess the magnitude and direction of significant predictors. ^ Results. Analysis showed that both ways of defining stage of readiness for obtaining a screening mammogram were associated with specific constructs, including decisional balance and processes of the change. ^ Conclusions. The results of the present study demonstrate that the TTM appears to translate to repeat mammography screening. Findings in the current study also support finding of previous studies that suggest that stage of readiness is associated with respondent decisional balance and the processes of change. ^

Explaining Recent Connecticut Bank Failures

Significant numbers of U.S. commercial bank failures in the late 1980s and early 1990s raise important questions about bank performance. We develop a failure-prediction model for Connecticut banks to examine events in 1991 and 1992. We adopt data envelopment analysis to derive measures of managerial efficiency. Our findings can be briefly stated. Managerial inefficiency does not provide significant information to explain Connecticut bank failures. Portfolio variables do generally contain significant information.

Data quality in trauma transfusion studies and the impact of missing data on predicting massive transfusion

Maximizing data quality may be especially difficult in trauma-related clinical research. Strategies are needed to improve data quality and assess the impact of data quality on clinical predictive models. This study had two objectives. The first was to compare missing data between two multi-center trauma transfusion studies: a retrospective study (RS) using medical chart data with minimal data quality review and the PRospective Observational Multi-center Major Trauma Transfusion (PROMMTT) study with standardized quality assurance. The second objective was to assess the impact of missing data on clinical prediction algorithms by evaluating blood transfusion prediction models using PROMMTT data. RS (2005-06) and PROMMTT (2009-10) investigated trauma patients receiving ≥ 1 unit of red blood cells (RBC) from ten Level I trauma centers. Missing data were compared for 33 variables collected in both studies using mixed effects logistic regression (including random intercepts for study site). Massive transfusion (MT) patients received ≥ 10 RBC units within 24h of admission. Correct classification percentages for three MT prediction models were evaluated using complete case analysis and multiple imputation based on the multivariate normal distribution. A sensitivity analysis for missing data was conducted to estimate the upper and lower bounds of correct classification using assumptions about missing data under best and worst case scenarios. Most variables (17/33=52%) had <1% missing data in RS and PROMMTT. Of the remaining variables, 50% demonstrated less missingness in PROMMTT, 25% had less missingness in RS, and 25% were similar between studies. Missing percentages for MT prediction variables in PROMMTT ranged from 2.2% (heart rate) to 45% (respiratory rate). For variables missing >1%, study site was associated with missingness (all p≤0.021). Survival time predicted missingness for 50% of RS and 60% of PROMMTT variables. MT models complete case proportions ranged from 41% to 88%. Complete case analysis and multiple imputation demonstrated similar correct classification results. Sensitivity analysis upper-lower bound ranges for the three MT models were 59-63%, 36-46%, and 46-58%. Prospective collection of ten-fold more variables with data quality assurance reduced overall missing data. Study site and patient survival were associated with missingness, suggesting that data were not missing completely at random, and complete case analysis may lead to biased results. Evaluating clinical prediction model accuracy may be misleading in the presence of missing data, especially with many predictor variables. The proposed sensitivity analysis estimating correct classification under upper (best case scenario)/lower (worst case scenario) bounds may be more informative than multiple imputation, which provided results similar to complete case analysis.^

Metodología para la evaluación de la consistencia del trazado de carreteras interurbanas de dos carriles

La consistencia del trazado puede interpretarse como la relación entre las características geométricas de una carretera y lo que espera encontrar el conductor que circula por ella. Si hay una correspondencia entre estos dos aspectos, la conducción puede hacerse de modo continuo, sin sobresaltos, lo que incide favorablemente sobre la seguridad en la circulación. Si bien hay una serie de recomendaciones desde el punto de vista geométrico para obtener trazados consistentes, esto no siempre se logra, y sólo en los últimos años se ha iniciado el estudio de metodologías para evaluar ésto, tanto en vías existentes como en vías proyectadas. La mayor parte de estas metodologías sólo considera el trazado en planta, olvidándose del trazado en alzado y de la coordinación entre los mismos. En esta Tesis doctoral se ha desarrollado una metodología para evaluar la consistencia del trazado en carreteras interurbanas de dos carriles que considera dichos aspectos. Para ello, se hizo un análisis exhaustivo de los índices de trazado, los cuales evalúan las características geométricas en planta y en alzado. Los índices se correlacionaron con la accidentalidad, para determinar cuál de ellos tiene mayor incidencia, encontrándose que es el cambio de curvatura vertical (VCCR); a este índice se le estableció un rango de calificación. Como elemento de evaluación complementario de análisis se seleccionó el perfil de velocidades de operación, procedimiento que ha sido probado en diferentes investigaciones, y del cual se desarrolló un modelo aplicado a Colombia. Para la coordinación de trazados en planta y alzado se evaluaron diferentes combinaciones geométricas, algunas de las cuales generaron reapariciones del trazado. Se ha definido un nuevo índice (Irt) que permite determinar numéricamente la posibilidad de que se presente esta situación, indeseable desde el punto de vista de la seguridad vial. La combinación de estos tres elementos permite una evaluación integral de los diferentes aspectos que inciden sobre la consistencia del trazado de una carretera. La metodología desarrollada se aplicó en el estudio de consistencia del trazado en algunas carreteras españolas y colombianas, ubicadas en distintos tipos de terreno. ABSTRACT Geometric Design Consistency can be defined as the relationship between the geometric characteristics of a road and what the driver expects to find when driving. If there is a correspondence between these two aspects, driving is smoother and unexpected events are minimized, which increases traffic safety conditions. Although from the geometric point of view there are several recommendations to ensure consistent designs, this is not always successfully applied. The study of methods to evaluate design consistency in existing and future routes has only begun in recent years. Most existing methods only consider the horizontal alignment of the road and overlook both the vertical alignment and the coordination that must exist between the vertical and the horizontal. The present Doctoral Thesis proposes a method to evaluate the geometric design consistency of a two-lane rural highway which considers all three of these aspects: the horizontal alignment, the vertical alignment and the coordination that must exist between them. In order to achieve this, several different alignment indices, that evaluate horizontal and vertical geometric characteristics, were thoroughly analyzed to determine their correlation with traffic accidents. The Vertical Curvature Change Rate (VCCR) index showed the highest correlation, and rating thresholds for this index have been established. To complement the evaluation, the operating speed profile, was chosen. This procedure has been extensively tested by several researchers. An operating speed prediction model adapted to Colombia was developed. To study the coordination between the horizontal and the vertical alignments of the road, several geometric combinations of the two were used. Some of these combinations generate undesirable losses of visibility. For this reason, a new index (Irt) was defined to numerically detect those cases, which are undesirable from the point of view of traffic safety. The combination of these three factors allows a comprehensive evaluation of the different aspects that affect the geometric design consistency of a highway. The methodology was applied to some Spanish and Colombian roads located in different types of terrain.

Dynamic effect of high speed railway traffic loads on the ballast track settlement

The traditional ballast track structures are still being used in high speed railways lines with success, however technical problems or performance features have led to non-ballast track solution in some cases. A considerable maintenance work is needed for ballasted tracks due to the track deterioration. Therefore it is very important to understand the mechanism of track deterioration and to predict the track settlement or track irregularity growth rate in order to reduce track maintenance costs and enable new track structures to be designed. The objective of this work is to develop the most adequate and efficient models for calculation of dynamic traffic load effects on railways track infrastructure, and then evaluate the dynamic effect on the ballast track settlement, using a ballast track settlement prediction model, which consists of the vehicle/track dynamic model previously selected and a track settlement law. The calculations are based on dynamic finite element models with direct time integration, contact between wheel and rail and interaction with railway cars. A initial irregularity profile is used in the prediction model. The track settlement law is considered to be a function of number of loading cycles and the magnitude of the loading, which represents the long-term behavior of ballast settlement. The results obtained include the track irregularity growth and the contact force in the final interaction of numerical simulation

Podredumbre parda del melocotonero (Monilinia spp.) : detección, identificación de especies y contribución a la epidemiología de la enfermedad

Monilinia spp. (M. laxa, M. fructigena y M. fructicola) causa marchitez en brotes y flores, chancros en ramas y podredumbre de la fruta de hueso provocando pérdidas económicas importantes en años con climatología favorable para el desarrollo de la enfermedad, particularmente en variedades tardías de melocotonero y nectarino. En estos huéspedes en España, hasta el momento, la especie predominante es M. laxa y, en menor proporción, M. fructigena. La reciente introducción en Europa de la especie de cuarentena M. fructicola hace necesaria una detección e identificación rápida de cada una de las especies. Además, hay diversos aspectos de la etiología y epidemiología de la enfermedad que no se conocen en las condiciones de cultivo españolas. En un primer objetivo de esta Tesis se ha abordado la detección e identificación de las especies de Monilinia spp. causantes de podredumbre parda. El estudio de las bases epidemiológicas para el control de la enfermedad constituye el fin del segundo objetivo. Para la detección del género Monilinia en material vegetal por PCR, diferenciándolo de otros hongos presentes en la superficie del melocotonero, se diseñaron una pareja de cebadores siguiendo un análisis del ADN ribosomal. La discriminación entre especies de Monilinia se consiguió utilizando marcadores SCAR (región amplificada de secuencia caracterizada), obtenidos después de un estudio de marcadores polimórficos de ADN amplificados al azar (RAPDs). También fue diseñado un control interno de amplificación (CI) basado en la utilización de un plásmido con secuencias de los cebadores diferenciadores del género, para ser utilizado en el protocolo de diagnóstico de la podredumbre parda con el fin de reconocer falsos negativos debidos a la inhibición de PCR por componentes celulares del material vegetal. Se disponía de un kit comercial que permitía distinguir Monilinia de otros géneros y M. fructicola del resto de especies mediante anticuerpos monoclonales utilizando la técnica DAS-ELISA. En esta Tesis se probaron diferentes fuentes de material como micelio ó conidias procedentes de cultivos en APD, o el micelio de la superficie de frutas o de momias frescas, como formas de antígeno. Los resultados obtenidos con ELISA se compararon con la identificación por métodos morfológico-culturales y por PCR con los cebadores desarrollados en esta Tesis. Los resultados demostraron la posibilidad de una detección temprana en frutas frescas por este método, realzando las posibilidades de una diagnosis temprana para una prevención más eficaz de M. fructicola en fruta de hueso. El estudio epidemiológico de la enfermedad comenzó con la determinación de las principales fuentes de inóculo primario y su importancia relativa en melocotoneros y nectarinos del valle del Ebro. Para ello se muestrearon 9 huertos durante los años 2003 a 2005 recogiendo todas las momias, frutos abortados, gomas, chancros, y brotes necróticos en los árboles. También se recogieron brotes aparentemente sanos y muestras de material vegetal situados en el suelo. En estas muestras se determinó la presencia de Monilinia spp. Los resultados mostraron que la fuente principal de inóculo son las momias que se quedan en los árboles en las que la supervivencia del hongo tras el invierno es muy alta. También son fuentes de inóculo las momias del suelo y los brotes necróticos. De aquí se deriva que una recomendación importante para los agricultores es que deben eliminar este material de los huertos. Un aspecto no estudiado en melocotonero o nectarino en España es la posible relación que puede darse entre la incidencia de infecciones latentes en los frutos inmaduros a lo largo del cultivo y la incidencia de podredumbre en los frutos en el momento de la recolección y en postcosecha. Esta relación se había observado previamente en otros frutales de hueso infectados con M. fructicola en diversos países del mundo. Para estudiar esta relación se realizaron ensayos en cinco huertos comerciales de melocotonero y nectarino situados en el Valle del Ebro en cuatro estados fenológicos durante los años 2000-2002. No se observaron infecciones latentes en botón rosa, dándose la máxima incidencia en precosecha, aunque en algunos huertos se daba otro pico en el endurecimiento del embrión. La especie prevaleciente fue M. laxa. Se obtuvo una correlación positiva significativa entre la incidencia de infecciones latentes y la incidencia de podredumbre en postcosecha. Se desarrolló también un modelo de predicción de las infecciones latentes en función de la temperatura (T) y el periodo de humectación (W). Este modelo indicaba que T y W explicaban el 83% de la variación en la incidencia de infecciones latentes causadas por Monilinia spp. Por debajo de 8ºC no se predecían latentes, necesitándose más de 22h de W para predecir la ocurrencia de latentes con T = 8ºC, mientras que solo se necesitaban 5h de W a 25ºC. Se hicieron también ensayos en condiciones controladas para determinar la relación entre la incidencia de las infecciones latentes, las condiciones ambientales (T y W), la concentración de inóculo del patógeno (I) y el estado de desarrollo del huésped (S) y para validar el modelo de predicción desarrollado con los experimentos de campo. Estos ensayos se llevaron cabo con flores y frutos de nectarino procedentes de un huerto comercial en seis estados fenológicos en los años 2004 y 2005, demostrándose que la incidencia de podredumbre en postcosecha y de infecciones latentes estaba afectada por T, W, I y S. En los frutos se producían infecciones latentes cuando la T no era adecuada para el desarrollo de podredumbre. Una vez desarrollado el embrión eran necesarias más de 4-5h de W al día y un inóculo superior a 104 conidias ml-1 para que se desarrollase o podredumbre o infección latente. La ecuación del modelo obtenido con los datos de campo era capaz de predecir los datos observados en estos experimentos. Para evaluar el efecto del inóculo de Monilinia spp. en la incidencia de infecciones latentes y de podredumbre de frutos en postcosecha se hicieron 11 experimentos en huertos comerciales de melocotonero y nectarino del Valle del Ebro durante 2002 a 2005. Se observó una correlación positiva entre los números de conidias de Monilinia spp. en la superficie de los frutos y la incidencia de infecciones latentes De los estudios anteriores se deducen otras dos recomendaciones importantes para los agricultores: las estrategias de control deben tener en cuenta las infecciones latentes y estimar el riesgo potencial de las mismas basándose en la T y W. Deben tener también en cuenta la concentración de esporas de Monilinia spp. en la superficie de los frutos para disminuir el riesgo de podredumbre parda. El conocimiento de la estructura poblacional de los patógenos sienta las bases para establecer métodos más eficaces de manejo de las enfermedades. Por ello en esta Tesis se ha estudiado el grado de diversidad genética entre distintas poblaciones de M. laxa en diferentes localidades españolas utilizando 144 marcadores RAPDs (59 polimórficos y 85 monomórficos) y 21 aislados. El análisis de la estructura de la población reveló que la diversidad genética dentro de las subpoblaciones (huertos) (HS) representaba el 97% de la diversidad genética (HT), mientras que la diversidad genética entre subpoblaciones (DST) sólo representaba un 3% del total de esta diversidad. La magnitud relativa de la diferenciación génica entre subpoblaciones (GST) alcanzaba 0,032 y el número estimado de migrantes por generación (Nm) fue de 15,1. Los resultados obtenidos en los dendrogramas estaban de acuerdo con el análisis de diversidad génica. Las agrupaciones obtenidas eran independientes del huerto de procedencia, año o huésped. En la Tesis se discute la importancia relativa de las diferentes fuentes evolutivas en las poblaciones de M. laxa. Finalmente se realizó un muestreo en distintos huertos de melocotonero y nectarino del Valle del Ebro para determinar la existencia o no de aislados resistentes a los fungicidas del grupo de los benzimidazoles y las dicarboximidas, fungicidas utilizados habitualmente para el control de la podredumbre parda y con alto riesgo de desarrollar resistencia en las poblaciones patógenas. El análisis de 114 aislados de M. laxa con los fungicidas Benomilo (bencimidazol) (1Bg m.a ml-1), e Iprodiona (dicarboximida) (5Bg m.a ml-1), mostró que ninguno era resistente en las dosis ensayadas. Monilinia spp. (M. laxa, M. fructigena and M. fructicola) cause bud and flower wilt, canker in branches and stone fruit rot giving rise important economic losses in years with appropriate environmental conditions, it is particularly important in late varieties of peach and nectarine. Right now, M. laxa is the major species for peach and nectarine in Spain followed by M. fructigena, in a smaller proportion. The recent introduction of the quarantine organism M. fructicola in Europe makes detection and identification of each one of the species necessary. In addition, there are different aspects of disease etiology and epidemiology that are not well known in Spain conditions. The first goal of this Thesis was the detection and identification of Monilinia spp. causing brown rot. Study of the epidemiology basis for disease control was the second objective. A pair of primers for PCR detection was designed based on the ribosomal DNA sequence in order to detect Monilinia spp. in plant material and to discriminate it from other fungi colonizing peach tree surface. Discrimination among Monilinia spp. was successful by SCAR markers (Sequence Characterized Amplified Region), obtained after a random amplified polymorphic DNA markers (RAPDs) study. An internal control for the PCR (CI) based on the use of a mimic plasmid designed on the primers specific for Monilinia was constructed to be used in diagnosis protocol for brown rot in order to avoid false negatives due to the inhibition of PCR as consequence of remained plant material. A commercial kit based on DAS-ELISA and monoclonals antibodies was successfully tested to distinguish Monilinia from other fungus genera and M. fructicola from other Monilinia species. Different materials such as micelium or conidias from APD cultures, or micelium from fresh fruit surfaces or mummies were tested in this Thesis, as antigens. Results obtained by ELISA were compared to classical identification by morphologic methods and PCR with the primers developed in this Thesis. Results demonstrated the possibility of an early detection in fresh fruits by this method for a more effective prevention of M. fructicola in stone fruit. The epidemiology study of the disease started with the determination of the main sources of primary inoculum and its relative importance in peach trees and nectarines in the Ebro valley. Nine orchards were evaluated during years 2003 to 2005 collecting all mummies, aborted fruits, rubbers, cankers, and necrotic buds from the trees. Apparently healthy buds and plant material located in the ground were also collected. In these samples presence of Monilinia spp. was determined. Results showed that the main inoculum sources are mummies that stay in the trees and where fungus survival after the winter is very high. Mummies on the ground and the necrotics buds are also sources of inoculum. As consequence of this an important recommendation for the growers is the removal of this material of the orchards. An important issue not well studied in peach or nectarine in Spain is the possible relationship between the incidence of latent infections in the immature fruits and the incidence of fruit rot at harvesting and postharvesting. This relationship had been previously shown in other stone fruit trees infected with M. fructicola in different countries over the world. In order to study this relationship experiments were run in five commercial peach and nectarine orchards located in the Ebro Valley in four phenologic states from 2000 to 2002. Latent infections were not observed in pink button, the maxima incidence arise in preharvest, although in some orchards another increase occurred in the embryo hardening. The most prevalence species was M. laxa. A significant positive correlation between the incidence of latent infections and the incidence of rot in postharvest was obtained. A prediction model of the latent infections based on the temperature (T) and the wetness duration (W) was also developed. This model showed that T and W explained 83% of the variation in latent infection incidence caused by Monilinia spp. Below 8ºC latent infection was not predicted, more than 22h of W with T = 8ºC were needed to predict latent infection occurrence of, whereas at 25ºC just 5h of W were enough. Tests under controlled conditions were also made to determine the relationship among latent infections incidence, environmental conditions (T and W), inoculum concentration of the pathogen (I) and development state of the host (S) to validate the prediction model developed on the field experiments. These tests were made with flowers and fruits of nectarine coming from a commercial orchard, in six phenologic states in 2004 and 2005, showing that incidence of rot in postharvest and latent infections were affected by T, W, I and S. In fruits latent infections took place when the T was not suitable for rot development. Once developed the embryo, more than 4-5h of W per day and higher inoculums (104 conidia ml-1) were necessary for rot or latent infection development. The equation of the model obtained with the field data was able to predict the data observed in these experiments. In order to evaluate the effect of inoculum of Monilinia spp. in the incidence of latent infections and of rot of fruits in postharvest, 11 experiments in commercial orchards of peach and nectarine of the Ebro Valley were performed from 2002 to 2005. A positive correlation between the conidial numbers of Monilinia spp. in the surface of the fruits and the incidence of latent infections was observed. Based on those studies other two important recommendations for the agriculturists are deduced: control strategies must consider the latent infections and potential risk based on the T and W. Spores concentration of Monilinia spp. in the surface of fruits must be also taken in concern to reduce the brown rot risk. The knowledge of the population structure of the pathogens determines the bases to establish more effective methods of diseases handling. For that reason in this Thesis the degree of genetic diversity among different M. laxa populations has been studied in different Spanish locations using 144 RAPDs markers (59 polymorphic and 85 monomorphics) on 21 fungal isolates. The analysis of the structure of the population revealed that the genetic diversity within the subpopulations (orchards) (HS) represented 97% of the genetic diversity (HT), whereas the genetic diversity between subpopulations (DST) only represented a 3% of the total of this diversity. The relative magnitude of the genic differentiation between subpopulations (GST) reached 0.032 and the considered number of migrantes by generation (Nm) was of 15.1. The results obtained in dendrograms were in agreement with the analysis of genic diversity. The obtained groupings were independent of the orchard of origin, year or host. In the Thesis the relative importance of the different evolutionary sources in the populations from M. laxa is discussed. Finally a sampling of resistant isolates in different orchards from peach and nectarine of Ebro Valley was made to determine the existence of fungicide resistance of the group of benzimidazoles and the dicarboximidas, fungicides used habitually for the control of rot brown and with high risk of resistance developing in the pathogenic populations. The analysis of 114 isolated ones of M. laxa with the fungicides Benomilo (bencimidazol) (1Bg m.a ml-1), and Iprodiona (dicarboximida) (5Bg m.a ml-1), showed no resistant in the doses evaluated.

Efectos dinámicos debidos al tráfico de ferrocarril sobre la infraestructura de vía y las estructuras

La vía tradicional sobre balasto sigue siendo una selección para las líneas de alta velocidad a pesar de los problemas técnicos y la prestación del funcionamiento. El problema de la vía sobre balasto es el proceso continuo del deterioro de éste debido a las cargas asociadas al tráfico ferroviario. En consecuencia es imprescindible un mantenimiento continuado para mantener un alineamiento adecuado de la vía. Por eso se surge la necesidad de comprender mejor el mecanismo involucrado en el deterioro de la vía y los factores claves que rigen su progresión a lo largo de ciclos de carga con el fin de reducir los costos del mantenimiento de la vía y mejorar el diseño de las nuevas vías. La presente tesis intenta por un lado desarrollar los modelos más adecuados y eficientes del vehículo y de la vía para los cálculos de los efectos dinámicos debido al tráfico de ferrocarril sobre la infraestructura de la vía sobre balasto, y por otro evaluar estos efectos dinámicos sobre el deterioro de la vía sobre balasto a largo plazo, empleando un adecuado modelo de predicción del deterioro de la misma. Se incluye en el trabajo una recopilación del estado del arte en lo referente a la dinámica de la vía, a la modelización del vehículo, de la vía y de la interacción entre ambos. También se hace un repaso al deterioro de la vía y los factores que influyen en su proceso. Para la primera línea de investigación de esta tesis, se han desarrollado los diferentes modelos del vehículo y de la vía y la modelización de la interacción entre ambos para los cálculos dinámicos en dos y tres dimensiones. En la interacción vehículo-vía, se ha empleado la formulación de contacto nodo-superficie para establecer la identificación de las superficies en contacto y el método de los multiplicadores de Lagrange para imponer las restricciones de contacto. El modelo de interacción se ha contrastado con los casos reportados en la literatura. Teniendo en cuenta el contacto no lineal entre rueda-carril y los perfiles de irregularidades distribuidas de la vía, se han evaluado y comparado los efectos dinámicos sobre el sistema vehículo-vía en la interacción de ambos, para distintas velocidades de circulación del vehículo, en los aspectos como la vibración del vehículo, fuerza de contacto, fuerza transmitida en los railpads, la vibración del carril. También se hace un estudio de la influencia de las propiedades de los componentes de la vía en la respuesta dinámica del sistema vehículo-vía. Se ha desarrollado el modelo del asiento de la vía que consiste en la implementación del modelo de acumulación de Bochum y del modelo de hipoplasticidad en la subrutina del usuario \UMAT" del programa ABAQUS. La implementación numérica ha sido comprobado al comparar los resultados de las simulaciones numéricas con los reportados en la literatura. Se ha evaluado la calidad geométrica de la vía sobre balasto de los tramos de estudio con datos reales de la auscultación proporcionados por ADIF (2012). Se ha propuesto una metodología de simulación, empleando el modelo de asiento, para reproducir el deterioro de la geometría de la vía. Se usan los perfiles de la nivelación longitudinal de la auscultación como perfiles de irregularidades iniciales de la vía en las simulaciones numéricas. También se evalúa la influencia de la velocidad de circulación sobre el deterioro de la vía. The traditional ballast track structures are still being used in high speed railways lines with success, however technical problems or performance features have led to ballast track solution in some cases. The considerable maintenance work is needed for ballasted tracks due to the track deterioration. Therefore it is very important to understand the mechanism of track deterioration and to predict the track settlement or track irregularity growth rate in order to reduce track maintenance costs and enable new track structures to be designed. This thesis attempts to develop the most adequate and efficient models for calculation of dynamic track load effects on railways track infrastructure, and to evaluate these dynamic effects on the track settlement, using a track settlement prediction model, which consists of the vehicle/track dynamic model previously selected and a track settlement law. A revision of the state of the knowledge regarding the track dynamics, the modelling of the vehicle, the track and the interaction between them is included. An overview related to the track deterioration and the factors influencing the track settlement is also done. For the first research of this thesis, the different models of vehicle, track and the modelling of the interaction between both have been developed. In the vehicle-track interaction, the node-surface contact formulation to establish the identification of the surfaces in contact and the Lagrange multipliers method to enforce contact constraint are used. The interaction model has been verified by contrast with some benchmarks reported in the literature. Considering the nonlinear contact between wheel-rail and the track irregularities, the dynamic effects on the vehicle-track system have been evaluated and compared, for different speeds of the vehicle, in aspects as vehicle vibration, contact force, force transmitted in railpads, rail vibration. A study of the influence of the properties of the track components on the the dynamic response of the vehicle-track system has been done. The track settlement model is developed that consist of the Bochum accumulation model and the hipoplasticity model in the user subroutine \UMAT" of the program ABAQUS. The numerical implementation has been verified by comparing the numerical results with those reported in the literature. The geometric quality of the ballast track has been evaluated with real data of auscultation provided by ADIF (2012). The simulation methodology has been proposed, using the settlement model for the ballast material, to reproduce the deterioration of the track geometry. The profiles of the longitudinal level of the auscultation is used as initial profiles of the track irregularities in the numerical simulation. The influence of the running speed on the track deterioration is also investigated.

Caracterización experimental del centelleo troposférico en banda Ka

El presente Proyecto Fin de Grado tiene como objetivo el estudio y caracterización del centelleo troposférico en ausencia de lluvia en la banda Ka de un enlace Tierra-satélite. Para ello se dispondrá de un equipo receptor situado en la Escuela Técnica Superior de Ingenieros de Telecomunicación. Los datos son emitidos desde el satélite EutelSat Hot Bird 13A a una frecuencia de 19,7 GHz. La primera parte del proyecto comienza con las bases teóricas de los distintos fenómenos que afectan a la propagación de un enlace satélite, mencionando los modelos de predicción más importantes. Se ha dado más importancia al apartado perteneciente al centelleo troposférico por ser el tema tratado en este proyecto. El estudio cuenta con datos del satélite durante 7 años comprendidos entre julio de 2006 a junio de 2013. Después del filtrado y el resto del tratamiento adecuado de los datos se han obtenido distintas distribuciones estadísticas que están relacionadas con el centelleo como la varianza. Más tarde se ha comparado la varianza experimental con parámetros meteorológicos obtenidos desde distintas bases de datos. El objetivo de esto ha sido discernir cuál de estos factores afecta en mayor medida a la intensidad de centelleo. Para ello se ha realizado la correlación entre la varianza y varios parámetros meteorológicos: temperatura, humedad relativa, humedad absoluta, índice de refracción húmedo, presión… Además se han realizado medidas de nubosidad en los que se ha clasificado las muestras dependiendo del tipo de nube presente en el cielo. A continuación se ha calculado la varianza mensual media y distribuciones acumuladas de ciertos modelos de predicción de centelleo, comparándolos gráficamente con las curvas experimentales. Estos modelos usan parámetros medidos en superficie por lo que se utilizarán algunos de los parámetros analizados en el capítulo anterior. Por último se expondrán las conclusiones sacadas a lo largo de la realización del proyecto y las posibles líneas de investigación futuras. ABSTRACT. The present Project has as the principal aim the study and characterization of tropospheric scintillation in lack of rain in the band Ka of an Earth-satellite link. It is provided for a receptor equipment located in the ETSIT. The data are broadcasted form the Eutelsat Hot Bird 13A satellite at the frecuency of 19,7 GHz. The beginning of the project starts with the theorical basis of the different phenomenons that affects to the propagation of a satellite link, naming the most important predictions models. The chapter referred to the scintillation has had more importance due to be the main topic in this project. The study deals with satellite data during 7 years between July 2006 to June 2013. After the filter and others treatments of the data, it has been getting different statistics distributions related to scintillation like variance. Later, the experimental variance has been compared with meteorological parameters obtained from different datasets. The purpose has been to decide which factor affects in a greater way to the scintillation intensity. For that it has been doing the correlation between variance and meteorological parameters: temperature, relative humidity, absolute humidity, air refractivity due to water vapour, pressure… Moreover, it has been doing cloudiness measurements in which the samples have been classified in order to the kind of cloud shown in the sky at that moment. Then it has been calculated the monthly averaged variance and the prediction model for cumulative distributions which has been compared with the experimental results. That models uses surface data that they will be uses some meteorological parameters analyzed in previous chapters. Finally it will be shown the conclusions obtained along the realization of the project and the possible ways of future research.

Wireless communication enhancement methods for mobile robots in radiation environments

En entornos hostiles tales como aquellas instalaciones científicas donde la radiación ionizante es el principal peligro, el hecho de reducir las intervenciones humanas mediante el incremento de las operaciones robotizadas está siendo cada vez más de especial interés. CERN, la Organización Europea para la Investigación Nuclear, tiene alrededor de unos 50 km de superficie subterránea donde robots móviles controlador de forma remota podrían ayudar en su funcionamiento, por ejemplo, a la hora de llevar a cabo inspecciones remotas sobre radiación en los diferentes áreas destinados al efecto. No solo es preciso considerar que los robots deben ser capaces de recorrer largas distancias y operar durante largos periodos de tiempo, sino que deben saber desenvolverse en los correspondientes túneles subterráneos, tener en cuenta la presencia de campos electromagnéticos, radiación ionizante, etc. y finalmente, el hecho de que los robots no deben interrumpir el funcionamiento de los aceleradores. El hecho de disponer de un sistema de comunicaciones inalámbrico fiable y robusto es esencial para la correcta ejecución de las misiones que los robots deben afrontar y por supuesto, para evitar tales situaciones en las que es necesario la recuperación manual de los robots al agotarse su energía o al perder el enlace de comunicaciones. El objetivo de esta Tesis es proveer de las directrices y los medios necesarios para reducir el riesgo de fallo en la misión y maximizar las capacidades de los robots móviles inalámbricos los cuales disponen de almacenamiento finito de energía al trabajar en entornos peligrosos donde no se dispone de línea de vista directa. Para ello se proponen y muestran diferentes estrategias y métodos de comunicación inalámbrica. Teniendo esto en cuenta, se presentan a continuación los objetivos de investigación a seguir a lo largo de la Tesis: predecir la cobertura de comunicaciones antes y durante las misiones robotizadas; optimizar la capacidad de red inalámbrica de los robots móviles con respecto a su posición; y mejorar el rango operacional de esta clase de robots. Por su parte, las contribuciones a la Tesis se citan más abajo. El primer conjunto de contribuciones son métodos novedosos para predecir el consumo de energía y la autonomía en la comunicación antes y después de disponer de los robots en el entorno seleccionado. Esto es importante para proporcionar conciencia de la situación del robot y evitar fallos en la misión. El consumo de energía se predice usando una estrategia propuesta la cual usa modelos de consumo provenientes de diferentes componentes en un robot. La predicción para la cobertura de comunicaciones se desarrolla usando un nuevo filtro de RSS (Radio Signal Strength) y técnicas de estimación con la ayuda de Filtros de Kalman. El segundo conjunto de contribuciones son métodos para optimizar el rango de comunicaciones usando novedosas técnicas basadas en muestreo espacial que son robustas frente a ruidos de campos de detección y radio y que proporcionan redundancia. Se emplean métodos de diferencia central finitos para determinar los gradientes 2D RSS y se usa la movilidad del robot para optimizar el rango de comunicaciones y la capacidad de red. Este método también se valida con un caso de estudio centrado en la teleoperación háptica de robots móviles inalámbricos. La tercera contribución es un algoritmo robusto y estocástico descentralizado para la optimización de la posición al considerar múltiples robots autónomos usados principalmente para extender el rango de comunicaciones desde la estación de control al robot que está desarrollando la tarea. Todos los métodos y algoritmos propuestos se verifican y validan usando simulaciones y experimentos de campo con variedad de robots móviles disponibles en CERN. En resumen, esta Tesis ofrece métodos novedosos y demuestra su uso para: predecir RSS; optimizar la posición del robot; extender el rango de las comunicaciones inalámbricas; y mejorar las capacidades de red de los robots móviles inalámbricos para su uso en aplicaciones dentro de entornos peligrosos, que como ya se mencionó anteriormente, se destacan las instalaciones científicas con emisión de radiación ionizante. En otros términos, se ha desarrollado un conjunto de herramientas para mejorar, facilitar y hacer más seguras las misiones de los robots en entornos hostiles. Esta Tesis demuestra tanto en teoría como en práctica que los robots móviles pueden mejorar la calidad de las comunicaciones inalámbricas mediante la profundización en el estudio de su movilidad para optimizar dinámicamente sus posiciones y mantener conectividad incluso cuando no existe línea de vista. Los métodos desarrollados en la Tesis son especialmente adecuados para su fácil integración en robots móviles y pueden ser aplicados directamente en la capa de aplicación de la red inalámbrica. ABSTRACT In hostile environments such as in scientific facilities where ionising radiation is a dominant hazard, reducing human interventions by increasing robotic operations are desirable. CERN, the European Organization for Nuclear Research, has around 50 km of underground scientific facilities, where wireless mobile robots could help in the operation of the accelerator complex, e.g. in conducting remote inspections and radiation surveys in different areas. The main challenges to be considered here are not only that the robots should be able to go over long distances and operate for relatively long periods, but also the underground tunnel environment, the possible presence of electromagnetic fields, radiation effects, and the fact that the robots shall in no way interrupt the operation of the accelerators. Having a reliable and robust wireless communication system is essential for successful execution of such robotic missions and to avoid situations of manual recovery of the robots in the event that the robot runs out of energy or when the robot loses its communication link. The goal of this thesis is to provide means to reduce risk of mission failure and maximise mission capabilities of wireless mobile robots with finite energy storage capacity working in a radiation environment with non-line-of-sight (NLOS) communications by employing enhanced wireless communication methods. Towards this goal, the following research objectives are addressed in this thesis: predict the communication range before and during robotic missions; optimise and enhance wireless communication qualities of mobile robots by using robot mobility and employing multi-robot network. This thesis provides introductory information on the infrastructures where mobile robots will need to operate, the tasks to be carried out by mobile robots and the problems encountered in these environments. The reporting of research work carried out to improve wireless communication comprises an introduction to the relevant radio signal propagation theory and technology followed by explanation of the research in the following stages: An analysis of the wireless communication requirements for mobile robot for different tasks in a selection of CERN facilities; predictions of energy and communication autonomies (in terms of distance and time) to reduce risk of energy and communication related failures during missions; autonomous navigation of a mobile robot to find zone(s) of maximum radio signal strength to improve communication coverage area; and autonomous navigation of one or more mobile robots acting as mobile wireless relay (repeater) points in order to provide a tethered wireless connection to a teleoperated mobile robot carrying out inspection or radiation monitoring activities in a challenging radio environment. The specific contributions of this thesis are outlined below. The first sets of contributions are novel methods for predicting the energy autonomy and communication range(s) before and after deployment of the mobile robots in the intended environments. This is important in order to provide situational awareness and avoid mission failures. The energy consumption is predicted by using power consumption models of different components in a mobile robot. This energy prediction model will pave the way for choosing energy-efficient wireless communication strategies. The communication range prediction is performed using radio signal propagation models and applies radio signal strength (RSS) filtering and estimation techniques with the help of Kalman filters and Gaussian process models. The second set of contributions are methods to optimise the wireless communication qualities by using novel spatial sampling based techniques that are robust to sensing and radio field noises and provide redundancy features. Central finite difference (CFD) methods are employed to determine the 2-D RSS gradients and use robot mobility to optimise the communication quality and the network throughput. This method is also validated with a case study application involving superior haptic teleoperation of wireless mobile robots where an operator from a remote location can smoothly navigate a mobile robot in an environment with low-wireless signals. The third contribution is a robust stochastic position optimisation algorithm for multiple autonomous relay robots which are used for wireless tethering of radio signals and thereby to enhance the wireless communication qualities. All the proposed methods and algorithms are verified and validated using simulations and field experiments with a variety of mobile robots available at CERN. In summary, this thesis offers novel methods and demonstrates their use to predict energy autonomy and wireless communication range, optimise robots position to improve communication quality and enhance communication range and wireless network qualities of mobile robots for use in applications in hostile environmental characteristics such as scientific facilities emitting ionising radiations. In simpler terms, a set of tools are developed in this thesis for improving, easing and making safer robotic missions in hostile environments. This thesis validates both in theory and experiments that mobile robots can improve wireless communication quality by exploiting robots mobility to dynamically optimise their positions and maintain connectivity even when the (radio signal) environment possess non-line-of-sight characteristics. The methods developed in this thesis are well-suited for easier integration in mobile robots and can be applied directly at the application layer of the wireless network. The results of the proposed methods have outperformed other comparable state-of-the-art methods.

Spatial analysis of geometric design consistency and road sight distance

Because of the high number of crashes occurring on highways, it is necessary to intensify the search for new tools that help in understanding their causes. This research explores the use of a geographic information system (GIS) for an integrated analysis, taking into account two accident-related factors: design consistency (DC) (based on vehicle speed) and available sight distance (ASD) (based on visibility). Both factors require specific GIS software add-ins, which are explained. Digital terrain models (DTMs), vehicle paths, road centerlines, a speed prediction model, and crash data are integrated in the GIS. The usefulness of this approach has been assessed through a study of more than 500 crashes. From a regularly spaced grid, the terrain (bare ground) has been modeled through a triangulated irregular network (TIN). The length of the roads analyzed is greater than 100 km. Results have shown that DC and ASD could be related to crashes in approximately 4% of cases. In order to illustrate the potential of GIS, two crashes are fully analyzed: a car rollover after running off road on the right side and a rear-end collision of two moving vehicles. Although this procedure uses two software add-ins that are available only for ArcGIS, the study gives a practical demonstration of the suitability of GIS for conducting integrated studies of road safety.