The performance of concrete exposed to marine environments: predictive modelling and use of laboratory/on site test methods

This paper reports an approach by which laboratory based testing and numerical modelling can be combined to predict the long term performance of a range of concretes exposed to marine environments. Firstly, a critical review of the test methods for assessing the chloride penetration resistance of concrete is given. The repeatability of the different test results is also included. In addition to the test methods, a numerical simulation model is used to explore the test data further to obtain long-term chloride ingress trends. The combined use of testing and modelling is validated with the help of long-term chloride ingress data from a North Sea exposure site. In summary, the paper outlines a methodology for determining the long term performance of concrete in marine environments.

Semi-destructive in situ tests as support to the assessment of a conservation process

This paper refers to the assessment on site by semi-destructive testing (SDT) methods of the consolidation efficiency of a conservation process developed by Henriques (2011) for structural and non-structural pine wood elements in service. This study was applied on scots pine wood (Pinus sylvestris L.) degraded by fungi after treatment with a biocidal product followed by consolidation with a polymeric product. This solution avoids substitutions of wood moderately degraded by fungi, improving its physical and mechanical characteristics. The consolidation efficiency was assessed on site by methods of drill resistance and penetration resistance. The SDT methods used showed good sensitivity to the conservation process and could evaluate their effectiveness. (C) 2015 Elsevier Ltd. All rights reserved.

Avaliação de estruturas de madeira em serviço: caso de estudo da Ermida da Ascensão de Cristo

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Matéria seca e altura das plantas de soja e arroz em função do grau de compactação e do teor de água de dois latossolos

Este trabalho teve o objetivo de avaliar a altura de plantas e a produção de matéria seca da parte aérea e das raízes de soja e arroz em dois teores de água (água retida a 0,05 e a 0,01 MPa) e três de resistência do solo à penetração (entre 0,25 e 6,46 MPa), determinados com o penetrômetro de anel dinamométrico. Foram utilizadas amostras de Latossolo Vermelho, distrófico, textura média (LVd) e Latossolo Vermelho, eutroférrico, textura argilosa (LVef), coletadas na profundidade de 0,0-0,20 m e compactadas em camadas de 0,03 m, em vasos de 0,20 m de altura e 0,25 m de diâmetro. A altura das plantas foi reduzida para valores de resistência à penetração superiores a 3,0 MPa. A menor produção de matéria seca da parte aérea das plantas ocorreu na resistência à penetração de 3,76 e 3,37 MPa para soja; 3,93 e 3,37 MPa para arroz, no Latossolo Vermelho, textura média e Latossolo Vermelho argiloso, respectivamente, no teor de água retida na tensão de 0,05 MPa, e no maior teor de água somente ocorreu redução da produção de matéria seca das raízes.

Sobrevivência de fungos fitopatogênicos habitantes do solo, em microcosmo, simulando solarização com prévia incorporação de materiais orgânicos

Os fungos fitopatogênicos habitantes do solo podem sobreviver por vários anos nesse ambiente por meio de estruturas de resistência, causando perdas em muitas culturas, por vezes, inviabilizando o pleno aproveitamento de vastas áreas agrícolas. O uso de materiais orgânicos no solo consorciado com a técnica de solarização propicia a retenção de compostos voláteis fungitóxicos emanados da rápida degradação dos materiais e que são letais a vários fitopatógenos. O objetivo deste experimento foi à prospecção de novos materiais orgânicos que produzissem voláteis fungitóxicos capazes de controlar fungos fitopatogênicos habitantes do solo, em condições de associação com a simulação da técnica de solarização (microcosmo). Portanto, o presente trabalho consistiu de seis tratamentos (Solarizado; Solarizado+Brócolos; Solarizado+Eucalipto; Solarizado+Mamona; Solarizado+Mandioca e Laboratório) e cinco períodos (0, 7, 14, 21 e 28 dias) para avaliar a sobrevivência de quatro fungos de solo (Fusarium oxysporum f. sp. lycopersici Raça 2; Macrophomina phaseolina; Rhizoctonia solani AG-4 HGI e Sclerotium rolfsii). em cada uma das duas câmaras de vidro (microcosmo) por dia avaliado continha uma bolsa de náilon contendo as estruturas de resistência de cada fitopatógeno. Estruturas dos fitopatógenos foram mantidas também em condições de laboratório como referencial de controle. Todos os materiais quando associados à simulação da solarização propiciaram o controle de todos os fitopatógenos estudados, entretanto, foi observado variação no controle dos fungos. O tratamento que apenas simulou a solarização não controlou nenhum fitopatógeno.

Modelagem e mapas de capacidade suporte de carga de solos cultivados com cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Compactação do solo causada pelo tráfego de máquinas na colheita de madeira de Eucalyptus grandis Hill ex Maiden

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação da variabilidade genética em uma população base de Eucalyptus camaldulensis Dehnh para fins de conservação e melhoramento genético

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nutrição mineral e qualidade do fruto de algumas frutíferas tropicais: goiabeira, mangueira,bananeira e mamoeiro

Fruit quality is the result of the action of several factors, in particular the individual and combined effect of mineral nutrients. The proper evaluation of mineral nutritional requirements causes that fruit plants can express all their genetic potential. Thus, a research has been conducted in tropical fruit, for evaluating the influence of mineral nutrients on fruit quality; however, they appear dispersed. The objective of this review was to compile and report the effects of mineral nutrients on fruit quality of guava, mango, banana and papaya. Consequently, information about the influence of the essential elements in color, flavor, shape, size, appearance, penetration resistance, physiological disturbs disease incidence, physicochemical characteristics and lifetime of post - harvest fruit are presented.

Capacidade de suporte de carga e densidade do solo em áreas de plantio direto com e sem escarificação

No-till has been used in many different regions of Brazil. However, depending on the location and intensity of machinery traffic, this has caused the problem of soil compaction and many producers are scarification the land as a solution to break through the layer that is restricting plant growth. The objective of this study was to evaluate the influence of scarification (0.30 m) in the physical properties of a dystrophic Alfisol comparing the results with a non-scarified contiguous area; both were previously conducted using no-till. The density and pressure of pre-consolidation were sampled in two areas of non-tillage, one with chiseling (PDCE) and one without (PDSE) by using the UMAS -Mobile Soil Sampling Unit built by NEMPA – Agroforestry Machinery and Tire Testing Center/FCA / UNESP, Botucatu ,SP. The UMAS is equipped with GPS which allows the samples to be georeferenced. The samples were evaluated in the laboratory through the collection of standardized rings. Sampling was performed at a dimension of 15 x 50 m, with 160 rings being collected. The samples containing rings which were used in determining the density and also for testing the consolidometer, were collected from the layers of 0 to 0.10 m, 0.10 to 0.20 m, 0.20 to 0.30 0.30 to I 0.40 m. For the odometer test the undisturbed sample rings were used in obtaining the load bearing capacity of the soil. The soil management adopted provided a decrease in soil density using no-tillage with scarification depths from 0.0 to 0.10 0.10 to 0.20 m while the other depths did not show any decrease. The pre-consolidation pressure in combination with soil aggregate resistance identified that the management process PDCE within all layers was subjected to water content reliability regarding a greater load bearing capacity of the soil. For the PDSE that only was possible in the 0 to 0.10 m, showing greater consolidation of this layer.

Benzoxazinoid Metabolites Regulate Innate Immunity against Aphids and Fungi in Maize

Benzoxazinoids (BXs), such as 2,4-dihydroxy-7-methoxy-2H-1,4-benzoxazin-3(4H)-one (DIMBOA), are secondary metabolites in grasses. The first step in BX biosynthesis converts indole-3-glycerol phosphate into indole. In maize (Zea mays), this reaction is catalyzed by either BENZOXAZINELESS1 (BX1) or INDOLE GLYCEROL PHOSPHATE LYASE (IGL). The Bx1 gene is under developmental control and is mainly responsible for BX production, whereas the Igl gene is inducible by stress signals, such as wounding, herbivory, or jasmonates. To determine the role of BXs in defense against aphids and fungi, we compared basal resistance between Bx1 wild-type and bx1 mutant lines in the igl mutant background, thereby preventing BX production from IGL. Compared to Bx1 wild-type plants, BX-deficient bx1 mutant plants allowed better development of the cereal aphid Rhopalosiphum padi, and were affected in penetration resistance against the fungus Setosphaeria turtica. At stages preceding major tissue disruption, R. padi and S. turtica elicited increased accumulation of DIMBOA-glucoside, DIMBOA, and 2-hydroxy-4,7-dimethoxy-1,4-benzoxazin-3-one-glucoside (HDMBOA-glc), which was most pronounced in apoplastic leaf extracts. Treatment with the defense elicitor chitosan similarly enhanced apoplastic accumulation of DIMBOA and HDMBOA-glc, but repressed transcription of genes controlling BX biosynthesis downstream of BX1. This repression was also obtained after treatment with the BX precursor indole and DIMBOA, but not with HDMBOA-glc. Furthermore, BX-deficient bx1 mutant lines deposited less chitosan-induced callose than Bx1 wild-type lines, whereas apoplast infiltration with DIMBOA, but not HDMBOA-glc, mimicked chitosan-induced callose. Hence, DIMBOA functions as a defense regulatory signal in maize innate immunity, which acts in addition to its well-characterized activity as a biocidal defense metabolite.

NDT to identify biological damage in wood

Nondestructive techniques are widely used to assess existing timber structures. The models proposed for these methods are usually performed in the laboratory using small clear wood specimens. But in real situations many anomalies, defects and biological damage are found in wood. In these cases the existing models only indicate that the values are outside normality without providing any other information. To solve this problem, a study of non-destructive probing methods for wood was performed, testing the behaviour of four different techniques (penetration resistance, pullout resistance, drill resistance and chip drill extraction) on wood samples with different biological damage, simulating an in-situ test. The wood samples were obtained from existing Spanish timber structures with biotic damage caused by borer insects, termites, brown rot and white rot. The study concludes that all of the methods offer more or less detailed information about the degree of deterioration of wood, but that the first two methods (penetration and pullout resistance) cannot distinguish between pathologies. On the other hand, drill resistance and chip drill extraction make it possible to differentiate pathologies and even to identify species or damage location. Finally, the techniques used were compared to characterize their advantages and disadvantages.

The effect of moisture content on nondestructive probing measurements

When assessing existing timber structures it is not possible to obtain density as the ratio mass/volume, so nondestructive probing methods are used to predict density. As in other nondestructive techniques, moisture content influences measurements. The goal of this paper is to study the influence of timber moisture content on two nondestructive probing techniques (penetration resistance and pullout resistance). 25 large cross section specimens of laricio pine from Spain were measured. The moisture content ranged from 65.1% to 8.3%. Penetration depth decreases and screw withdrawal strength increases when moisture content decreases below the fiber saturation point. There are lineal tendencies in both techniques. No moisture content influence was found in measures above fiber saturation point.

Factors affecting the formation of a skin reservoir for topically applied solutes

The reservoir function of the skin is an important determinant of the duration of action of a topical solute. The reservoir can exist in the stratum corneum, in the viable avascular tissue (viable epidermis and supracapillary dermis) and in the dermis. A steroid reservoir in the stratum corneum has been demonstrated by the reactivation of a vasoconstrictor effect by occlusion or application of a placebo cream to the skin some time after the original topical application of steroid. Other solutes have also been reported to show a reservoir effect in the skin after topical application. A simple compartmental model is used to understand why reactivation of vasoconstriction some time after a topical steroid application shows dependency on time, topical solute concentration and the product used to cause reactivation. The model is also used to show which solutes are likely to show a reservoir effect and could be potentially affected by desquamation, especially when the turnover of the skin is abnormally rapid. A similar form of the model can be used to understand the promotion of reservoir function in the viable tissue and in the dermis in terms of effective removal by blood perfusing the tissues. Copyright (C) 2004 S. Karger AG, Basel.

Diversity of Vancomycin Genes in Sub-tropical Soils

With the increased antibiotic exposure from anthropogenic sources, soil microbes are an ever-increasing ecological pool of resistant bacteria. This is the case with bacterial resistance to vancomycin through transfer of van-resistance genes by transposons. Studies show that bacterial species other than enteroccoci harbor genetic-like elements such as the Tn1546 transposon containing vancomycin-resistant genes. Overuse and misuse of antibiotics in hospital settings and agricultural practices have led to an increase in transferability of vancomycin-resistant genes among microbes. The objective of this project is to analyze the diversity of these genes found in the soil microbes from Miami-Dade County. Bacterial isolates were Gram-stained and the Kirby-Bauer antibiotic disk diffusion test was performed to determine the degree of resistance. Results showed that all bacterial isolates were resistant to penicillin at the 10 µg concentration and most were susceptible to varying vancomycin concentrations (10 µg, 20 µg, and 30 µg). A 1465 bp fragment was amplified from the 16S rDNA gene using 27F and 1492R universal primers from the multi-antibiotic resistant bacteria and sequenced to identify the isolates. Three Gram-negative bacteria genera were identified with the closest phylogenetic match to: Pseudomonas sp., Stenotrophomonas sp., Xanthomonas sp., as well as two Gram-positive bacteria genera: Bacillus sp. and Brevibacillus sp. The isolates’ vanA and vanB genes were amplified using the respective primers. Ongoing work is underway to sequence and compare these known van resistant genes, with the goal of revealing intrinsic vancomycin resistance present in soil bacteria.