Simultaneous demultiplexing, data regeneration, and clock recovery with a single semiconductor optical amplifier-based nonlinear-optical loop mirror

We demonstrate simultaneous demultiplexing, data regeneration and clock recovery at 10Gbits/s, using a single semiconductor optical amplifier–based nonlinear-optical loop mirror in a phase-locked loop configuration.

Dark soliton generation from semiconductor optical amplifier gain medium in ring fiber configuration

We have investigated the mode-lock operation from a semiconductor optical amplifier (SOA) gain chip in the ring fibre configuration. At lower pump currents, the laser generates dark soliton pulses both at the fundamental repetition rate of 39 MHz and supports up to the 6th harmonic order corresponding to 234-MHz repetition rate with an output power of ∼2.1 mW. At higher pump currents, the laser can be switched between the bright, dark and concurrent bright and dark soliton generation regimes.

Noise suppression in monolithically integrated Michelson interferometer

A novel monolithically integrated Michelson interferometer using intersecting twin-contact semiconductor optical amplifiers is proposed and implemented whereby the two arms are gain imbalanced to give enhanced noise suppression. Experimental OSNR improvements of 8.4 dB for pulses with durations 8 ps and by default ER of 14 dB are demonstrated for low driving currents of between 25 and 30 mA. This is believed to be the smallest Michelson interferometer to date.

Monolithic MZI-SOA hybrid switch for low-power and low-penalty operation.

We report the first experimental demonstration of a monolithically integrated hybrid dilated 2×2 modular optical switch using Mach-Zehnder modulators as low-loss 1×2 switching elements and short semiconductor optical amplifiers to provide additional extinction and gain. An excellent 40 dB cross-talk/extinction ratio is recorded with data-modulated signal-to-noise ratios of up to 44 dB in a 0.1 nm bandwidth. A switching time of 3 ns is demonstrated. Bit error rate studies show extremely low subsystem penalties of less than 0.1 dB, and studies indicate that, by using this hybrid switch building block, an 8×8 port switch could be achieved with 14 dB input power dynamic range for subsystem penalties of less than 0.5 dB.

Noise suppression in a novel monolithically integrated michelson interferometer

A novel monolithically integrated Michelson Interferometer using intersecting twincontact semiconductor optical amplifiers is proposed whereby the two arms are gain imbalanced to give noise suppression. Experimental OSNR improvements of 6.2dB for 8ps pulses is demonstrated. © 2005 Optical Society of America.

Noise suppression in a novel monolithically integrated michelson interferometer

A novel monolithically integrated Michelson Interferometer using intersecting twincontact semiconductor optical amplifiers is proposed whereby the two arms are gain imbalanced to give noise suppression. Experimental OSNR improvements of 6.2dB for 8ps pulses is demonstrated. © 2005 Optical Society of America.

Polarization insensitive gain medium with hybrid strained quantum well

A polarization insensitive gain medium for optical amplifiers has been fabricated. The active layer is a structure with alternate tensile and compressive strain quantum wells. The waveguide is made into a taper with angled facets. In the experiment we found that the structure can suppress the lasing and decrease the polarization sensitivity. The gain imbalance between transverse electric and transverse magnetic gains is small, and 0.1 dB is obtained at a driving current of 100 mA. The full-width at half-maximum of amplified spontaneous emission is 40 nm within large current. (C) 2002 Elsevier Science Ltd. All rights reserved.

Estudo e aplicação de amplificadores ópticos para suporte a redes banda larga

Esta tese tem como foco principal a análise dos principais tipos de amplificação óptica e algumas de suas aplicações em sistemas de comunicação óptica. Para cada uma das tecnologias abordadas, procurou-se definir o estado da arte bem como identificar as oportunidades de desenvolvimento científico relacionadas. Os amplificadores para os quais foi dirigido alguma atenção neste documento foram os amplificadores em fibra dopada com Érbio (EDFA), os amplificadores a semicondutor (SOA) e os amplificadores de Raman (RA). Este trabalho iniciou-se com o estudo e análise dos EDFA’s. Dado o interesse científico e económico que estes amplificadores têm merecido, apenas poucos nichos de investigação estão ainda em aberto. Dentro destes, focá-mo-nos na análise de diferentes perfis de fibra óptica dopada de forma a conseguir uma optimização do desempenho dessas fibras como sistemas de amplificação. Considerando a fase anterior do trabalho como uma base de modelização para sistemas de amplificação com base em fibra e dopantes, evoluiu-se para amplificadores dopados mas em guias de onda (EDWA). Este tipo de amplificador tenta reduzir o volume físico destes dispositivos, mantendo as suas características principais. Para se ter uma forma de comparação de desempenho deste tipo de amplificador com os amplificadores em fibra, foram desenvolvidos modelos de caixa preta (BBM) e os seus parâmetros afinados por forma a termos uma boa modelização e posterior uso deste tipo de amplificiadores em setups de simulação mais complexos. Depois de modelizados e compreendidos os processo em amplificadores dopados, e com vista a adquirir uma visão global comparativa, foi imperativo passar pelo estudo dos processos de amplificação paramétrica de Raman. Esse tipo de amplificação, sendo inerente, ocorre em todas as bandas de propagação em fibra e é bastante flexível. Estes amplificadores foram inicialmente modelizados, e algumas de suas aplicações em redes passivas de acesso foram estudadas. Em especial uma série de requisitos, como por exemplo, a gama de comprimentos de onda sobre os quais existem amplificação e os altos débitos de perdas de inserção, nos levaram à investigação de um processo de amplificação que se ajustasse a eles, especialmente para buscar maiores capacidades de amplificação (nomeadamente longos alcances – superiores a 100 km – e altas razões de divisão – 1:512). Outro processo investigado foi a possibilidade de flexibilização dos parâmetros de comprimento de onda de ganho sem ter que mudar as caractísticas da bomba e se possível, mantendo toda a referenciação no transmissor. Este processo baseou-se na técnica de clamping de ganho já bastante estudada, mas com algumas modificações importantes, nomeadamente a nível do esquema (reflexão apenas num dos extremos) e da modelização do processo. O processo resultante foi inovador pelo recurso a espalhamentos de Rayleigh e Raman e o uso de um reflector de apenas um dos lados para obtenção de laser. Este processo foi modelizado através das equações de propagação e optimizado, tendo sido demonstrado experimentalmente e validado para diferentes tipos de fibras. Nesta linha, e dada a versatilidade do modelo desenvolvido, foi apresentada uma aplicação mais avançada para este tipo de amplificadores. Fazendo uso da sua resposta ultra rápida, foi proposto e analisado um regenerador 2R e analisada por simulação a sua gama de aplicação tendo em vista a sua aplicação sistémica. A parte final deste trabalho concentrou-se nos amplificadores a semiconductor (SOA). Para este tipo de amplificador, os esforços foram postos mais a nível de aplicação do que a nível de sua modelização. As aplicações principais para estes amplificadores foram baseadas em clamping óptico do ganho, visando a combinação de funções lógicas essenciais para a concepção de um latch óptico com base em componentes discretos. Assim, com base num chip de ganho, foi obtido uma porta lógica NOT, a qual foi caracterizada e demonstrada experimentalmente. Esta foi ainda introduzida num esquema de latching de forma a produzir um bi-estável totalmente óptico, o qual também foi demonstrado e caracterizado. Este trabalho é finalizado com uma conclusão geral relatando os subsistemas de amplificação e suas aplicacações.

Radio over fiber broadband access networks architectures based on wavelength division multiplexing techniques

The recent remarkable growth in bandwidth of both wired optical and wireless access networks supports a burst of new high bandwidth Internet applications such as: peer-topeer file sharing, cloud storage, on-line gaming, video streaming, etc. Within this scenario, the convergence of fixed and wireless access networks offers significant opportunities for network operators to satisfy user demands, and simultaneously reduce the cost of implementing and running separated wireless and wired networks. The integration of wired and wireless network can be accomplished within several scenarios and at several levels. In this thesis we will focus on converged radio over fiber architectures, particularly on two application scenarios: converged optical 60 GHz wireless networks and wireless overlay backhauling over bidirectional colorless wavelength division multiplexing passive optical networks (WDM-PONs). In the first application scenario, optical 60 GHz signal generation using external modulation of an optical carrier by means of lithium niobate (LiNbO3) Mach- Zehnder modulators (MZM) is considered. The performance of different optical modulation techniques, robust against fiber dispersion is assessed and dispersion mitigation strategies are identified. The study is extended to 60 GHz carriers digitally modulated with data and to systems employing subcarrier multiplexed (SCM) mm-wave channels. In the second application scenario, the performance of WDM-PONs employing reflective semiconductor optical amplifiers (RSOAs), transmitting an overlay orthogonal frequency-division multiplexing (OFDM) wireless signal is assessed analytically and experimentally, with the relevant system impairments being identified. It is demonstrated that the intermodulation due to the beating of the baseband signal and wireless signal at the receiver can seriously impair the wireless channel. Performance degradation of the wireless channel caused by the RSOA gain modulation owing to the downstream baseband data is also assessed, and system design guidelines are provided.

Controllo ottico automatizzato di circuiti fotonici integrati: Progettazione, realizzazione e valutazione

In this report a new automated optical test for next generation of photonic integrated circuits (PICs) is provided by the test-bed design and assessment. After a briefly analysis of critical problems of actual optical tests, the main test features are defined: automation and flexibility, relaxed alignment procedure, speed up of entire test and data reliability. After studying varied solutions, the test-bed components are defined to be lens array, photo-detector array, and software controller. Each device is studied and calibrated, the spatial resolution, and reliability against interference at the photo-detector array are studied. The software is programmed in order to manage both PIC input, and photo-detector array output as well as data analysis. The test is validated by analysing state-of-art 16 ports PIC: the waveguide location, current versus power, and time-spatial power distribution are measured as well as the optical continuity of an entire path of PIC. Complexity, alignment tolerance, time of measurement are also discussed.

Low-power vertical cavity NAND gate

The study of the Vertical-Cavity Semiconductor Optical Amplifiers (VCSOAs) for optical signal processing applications is increasing his interest. Due to their particular structure, the VCSOAs present some advantages when compared to their edge-emitting counterparts including low manufacturing costs, high coupling efficiency to optical fibers and the ease to fabricate 2-D arrays of this kind of devices. As a consequence, all-optical logic gates based on VCSOAs may be very promising devices for their use in optical computing and optical switching in communications. Moreover, since all the boolean logic functions can be implemented by combining NAND logic gates, the development of a Vertical-Cavity NAND gate would be of particular interest. In this paper, the characteristics of the dispersive optical bistability appearing on a VCSOA operated in reflection are studied. A progressive increment of the number of layers compounding the top Distributed Bragg Reflector (DBR) of the VCSOA results on a change on the shape of the appearing bistability from an S-shape to a clockwise bistable loop. This resulting clockwise bistability has high on-off contrast ratio and input power requirements one order of magnitude lower than those needed for edge-emitting devices. Based on these results, an all-optical vertical-cavity NAND gate with high on-off contrast ratio and an input power for operation of only 10|i\V will be reported in this paper.

Integrable high order UWB pulse photonic generator based on cross phase modulation in a SOA-MZI

We propose and experimentally demonstrate a potentially integrable optical scheme to generate high order UWB pulses. The technique is based on exploiting the cross phase modulation generated in an InGaAsP Mach-Zehnder interferometer containing integrated semiconductor optical amplifiers, and is also adaptable to different pulse modulation formats through an optical processing unit which allows to control of the amplitude, polarity and time delay of the generated taps.

UWB Monocycle Generator based on the non-linear effects of an SOA-integrated structure

In this letter, we propose and experimentally demonstrate a novel and single structure to generate ultra-wideband (UWB) pulses by means of the cross-phase modulation present in a semiconductor optical amplifier unified structure. The key components of this system is an integrated Mach-Zehnder interferometer with two semiconductor optical amplifiers and an optical processing unit. The fusion of these two components permits the generation and customization of UWB monocycle pulses. The polarity of the output pulses is easily modified through the single selection of a specific input port. Moreover, the capacity of transmitting several data sequences is demonstrated and the potentiality to adapt the system to different modulation formats is analyzed.

Wavelength conversion, regeneration and tone manipulation using integrated semiconductor lasers and amplifiers

An integrated semiconductor optical amplifier/distributed feedback (SOA/DFB) laser that show promise as a simple all-optical wavelength conversion device together with useful simultaneous functions such as 2R regeneration and the ability to remove a wavelength identifying tone is presented. Wavelength conversion performance at 20Gb/s and 40Gb/s can be obtained with this laser.

Analysis of the optical confinement factor in semiconductor lasers

We derive formulas for the optical confinement factor Gamma from Maxwell's equations for TE and TM modes in the slab waveguide. The numerical results show that the formulas yield correct mode gain for the modes propagating in the waveguide. We also compare the formulas with the standard definition of Gamma as the ratio of power flow in the active region to the total power flow. The results show that the standard definition will underestimate the difference of optical confinement factors between TE and TM modes, and will underestimate the difference of material gains necessary for polarization insensitive semiconductor laser amplifiers. It is important to use correct optical confinement factors for designing polarization insensitive semiconductor laser amplifiers. For vertical cavity surface-emitting lasers, the numerical results show that Gamma can be defined as the proportion of the product of the refractive index and the squared electric field in the active region. (C) 1996 American Institute of physics.