Oral medication delivery in impaired swallowing: Thickening liquid medications for safe swallowing alters dissolution characteristics

Acetaminophen (paracetamol) is available in a wide range of oral formulations designed to meet the needs of the population across the age-spectrum, but for people with impaired swallowing, i.e. dysphagia, both solid and liquid medications can be difficult to swallow without modification. The effect of a commercial polysaccharide thickener, designed to be added to fluids to promote safe swallowing by dysphagic patients, on rheology and acetaminophen dissolution was tested using crushed immediate-release tablets in water, effervescent tablets in water, elixir and suspension. The inclusion of the thickener, comprised of xanthan gum and maltodextrin, had a considerable impact on dissolution; acetaminophen release from modified medications reached 12-50% in 30 minutes, which did not reflect the pharmacopeia specification for immediate release preparations. Flow curves reflect the high zero-shear viscosity and the apparent yield stress of the thickened products. The weak gel nature, in combination with high G’ values compared to G” (viscoelasticity) and high apparent yield stress, impact drug release. The restriction on drug release from these formulations is not influenced by the theoretical state of the drug (dissolved or dispersed), and the approach typically used in clinical practice (mixing crushed tablets into pre-prepared thickened fluid) cannot be improved by altering the order of incorporation or mixing method.

Oversized Materials, Box 1 1873, 1876, 1880

Oversized materials is the digitized contents of one box (OS1) that consists of correspondence and an address from Box 2, Folders 12, 13 and 17.

Oversized Materials, Box 1 1873, 1876, 1880

Oversized materials is the digitized contents of one box (OS1) that consists of correspondence and an address from Box 2, Folders 12, 13 and 17.

Oversized Materials, Box 1 1873, 1876, 1880

Oversized materials is the digitized contents of one box (OS1) that consists of correspondence and an address from Box 2, Folders 12, 13 and 17.

Oversized Materials, Box 1 1873, 1876, 1880

Oversized materials is the digitized contents of one box (OS1) that consists of correspondence and an address from Box 2, Folders 12, 13 and 17.

Dislocation after total hip replacement: there is no such thing as a safe zone for socket placement with the posterior approach

Introduction Malorientation of the socket contributes to instability after hip arthroplasty but the optimal orientation of the cup in relation to the pelvis has not been unequivocally described. Large radiological studies are few and problems occur with film standardisation, measurement methodology used and alternative definitions of describing acetabular orientation. Methods A cohort of 1,578 patients from a single institution is studied where all patient data was collected prospectively. Risk factors for patients undergoing surgery are analysed. Radiological data was compared between a series of non-dislocating hips and dislocating cases matched 2:1 by operation type, age and diagnosis. Results The overall dislocation rate for all 1,578 cases was 3.23% but the rate varied according to the type of surgery performed. The rate in uncomplicated primary cases was 2.4% which increased to 9.3% for second stage implantation for a two stage procedure for infection. There was no significant difference in the variability of the dislocating and non-dislocating groups for either inclination (p = 0.393) or anteversion (p = 0.661). Conclusions A “safe zone” for socket orientation to avoid dislocation could not be defined. The cause of dislocation is multifactorial, re-establishing the anatomic centre of rotation, balancing soft tissues and avoidance of impingement around the hip are important considerations.

An accurate method for the experimental evaluation of the acoustical impedance of a black box

Among different methods, the transmission-line or the impedance tube method has been most popular for the experimental evaluation of the acoustical impedance of any termination. The current state of method involves extrapolation of the measured data to the reflecting surface or exact locations of the pressure maxima, both of which are known to be rather tricky. The present paper discusses a method which makes use of the positions of the pressure minima and the values of the standing-wave ratio at these points. Lippert's concept of enveloping curves has been extended. The use of Smith or Beranek charts, with their inherent inaccuracy, has been altogether avoided. The existing formulas for the impedance have been corrected. Incidentally, certain other errors in the current literature have also been brought to light.Subject Classification: 85.20.

Essays on Banking Crises

This thesis aims at finding the role of deposit insurance scheme and central bank (CB) in keeping the banking system safe. The thesis also studies the factors associated with long-lasting banking crises. The first essay analyzes the effect of using explicit deposit insurance scheme (EDIS), instead of using implicit deposit insurance scheme (IDIS), on banking crises. The panel data for the period of 1980-2003 includes all countries for which the data on EDIS or IDIS exist. 70% of the countries in the sample are less developed countries (LDCs). About 55% of the countries adopting EDIS also come from LDCs. The major finding is that the using of EDIS increases the crisis probability at a strong significance level. This probability is greater if the EDIS is inefficiently designed allowing higher scope of moral hazard problem. Specifically, the probability is greater if the EDIS provides higher coverage to deposits and if it is less powerful from the legal point of view. This study also finds that the less developed a country is to handle EDIS, the higher the chance of banking crisis. Once the underdevelopment of an economy handling the EDIS is controlled, the EDIS separately is no longer a significant factor of banking crises. The second essay aims at determining whether a country s powerful CB can lessen the instability of the banking sector by minimizing the likelihood of a banking crisis. The data used include indicators of the CB s autonomy for a set of countries over the period of 1980-89. The study finds that in aggregate a more powerful CB lessens the probability of banking crisis. When the CB s authority is disentangled with respect to its responsibilities, the study finds that the longer tenure of CB s chief executive officer and the greater power of CB in assigning interest rate on government loans are necessary for reducing the probability of banking crisis. The study also finds that the probability of crisis reduces more if an autonomous CB can perform its duties in a country with stronger law and order tradition. The costs of long-lasting banking crises are high because both the depositors and the investors lose confidence in the banking system. For a rapid recovery of a crisis, the government very often undertakes one or more crisis resolution policy (CRP) measures. The third essay examines the CRP and other explanatory variables correlated with the durations of banking crises. The major finding is that the CRP measure allowing the regulation forbearance to keep the insolvent banks operative and the public debt relief program are respectively strongly and weakly significant to increase the durations of crises. Some other explanatory variables, which were found by previous studies to be related with the probability of crises to occur, are also correlated with the durations of crises.

Cluster randomised-control trial for an Australian child protection education program: Study protocol for the Learn to be safe with Emmy and friends™

Background Child maltreatment has severe short-and long-term consequences for children’s health, development, and wellbeing. Despite the provision of child protection education programs in many countries, few have been rigorously evaluated to determine their effectiveness. We describe the design of a multi-site gold standard evaluation of an Australian school-based child protection education program. The intervention has been developed by a not-for-profit agency and comprises 5 1-h sessions delivered to first grade students (aged 5–6 years) in their regular classrooms. It incorporates common attributes of effective programs identified in the literature, and aligns with the Australian education curriculum. Methods/Design A three-site cluster randomised controlled trial (RCT) of Learn to be safe with Emmy and friends™ will be conducted with children in approximately 72 first grade classrooms in 24 Queensland primary (elementary) schools from three state regions, over a period of 2 years. Entire schools will be randomised, using a computer generated list of random numbers, to intervention and wait-list control conditions, to prevent contamination effects across students and classes. Data will be collected at baseline (pre-assessment), immediately after the intervention (post-assessment), and at 6-, 12-, and 18-months (follow-up assessments). Outcome assessors will be blinded to group membership. Primary outcomes assessed are children’s knowledge of program concepts; intentions to use program knowledge, skills, and help-seeking strategies; actual use of program material in a simulated situation; and anxiety arising from program participation. Secondary outcomes include a parent discussion monitor, parent observations of their children’s use of program materials, satisfaction with the program, and parental stress. A process evaluation will be conducted concurrently to assess program performance. Discussion This RCT addresses shortcomings in previous studies and methodologically extends research in this area by randomising at school-level to prevent cross-learning between conditions; providing longer-term outcome assessment than any previous study; examining the degree to which parents/guardians discuss intervention content with children at home; assessing potential moderating/mediating effects of family and child demographic variables; testing an in-vivo measure to assess children’s ability to discriminate safe/unsafe situations and disclose to trusted adults; and testing enhancements to existing measures to establish greater internal consistency.

Measurement of the acoustical impedance of a black box at low frequencies using a shorter impedance tube

For the experimental evaluation of the acoustical impedance of a termination by the impedance-tube method at low frequencies, the length of the impedance tube is a problem. In the present paper, the method of exact analysis of standing waves developed by the authors for the stationary medium as well as for mean flow, has been extended for measurement of the acoustical impedance of a termination at low frequencies. The values of the tube attenuation factor and the wave number at the low frequency of interest are established from the experiment conducted, with the given impedance tube, at a higher frequency. Then, exciting the tube at the desired low frequency it is sufficient to measure sound pressure at three differenct locations (not necessarily the minima) in order to evaluate reflection coefficient and hence the impedance of the termination at that frequency.

Method for evaluation of the acoustical impedance of a black box, with or without mean flow, measuring pressures at fixed positions

The transmission-line or the impedance-tube method for the measurement of the acoustic impedance of any termination involves a search for various minima and maxima of pressure. For this purpose, arrangement has to be made for the microphone to travel along the length of the impedance tube, and this complicates the design of the tube considerably. The present paper discusses a method which consists in evaluating the tube attenuation factor at any convenient frequency by making use of measured SPL's at two (or more) fixed locations with a rigid termination, calculating the tube attenuation factor and wave number at the required frequency of interest with or without mean flow (as applicable), and finally evaluating the impedance of the given termination by measuring and using SPL's at three (or more) fixed locations. Thus, the required impedance tube is considerably smaller in length, simpler in design, easier to manufacture, cheaper in cost and more convenient to use. The design of the tube is also discussed. Incidentally, it is also possible to evaluate the impedance at any low frequency without having to use a larger impedance tube.

Towards an understanding of the information dynamics of the handover process in aged care settings: A prerequisite for the safe and effective use of ICT

Background Poor clinical handover has been associated with inaccurate clinical assessment and diagnosis, delays in diagnosis and test ordering, medication errors and decreased patient satisfaction in the acute care setting. Research on the handover process in the residential aged care sector is very limited. Purpose The aims of this study were to: (i) Develop an in-depth understanding of the handover process in aged care by mapping all the key activities and their information dynamics, (ii) Identify gaps in information exchange in the handover process and analyze implications for resident safety, (iii) Develop practical recommendations on how information communication technology (ICT) can improve the process and resident safety. Methods The study was undertaken at a large metropolitan facility in NSW with more than 300 residents and a staff including 55 registered nurses (RNs) and 146 assistants in nursing (AINs). A total of 3 focus groups, 12 interviews and 3 observation sessions were conducted over a period from July to October 2010. Process mapping was undertaken by translating the qualitative data via a five-category code book that was developed prior to the analysis. Results Three major sub-processes were identified and mapped. The three major stages are Handover process (HOP) I “Information gathering by RN”, HOP II “Preparation of preliminary handover sheet” and HOP III “Execution of handover meeting”. Inefficient processes were identified in relation to the handover including duplication of information, utilization of multiple communication modes and information sources, and lack of standardization. Conclusion By providing a robust process model of handover this study has made two critical contributions to research in aged care: (i) a means to identify important, possibly suboptimal practices; and (ii) valuable evidence to plan and improve ICT implementation in residential aged care. The mapping of this process enabled analysis of gaps in information flow and potential impacts on resident safety. In addition it offers the basis for further studies into a process that, despite its importance for securing resident safety and continuity of care, lacks research.

Keeping kids sun safe: exploring parents' beliefs about their young child's sun-protective behaviours

Objectives Melanoma of the skin is the third most commonly diagnosed cancer in Australia. Given the high incidence of sunburn in children and the level of sun protection provided by parents is often infrequent and/or insufficient, this research employed qualitative methodology to examine parents' beliefs about their young child's sun safe behaviour. Methods Parents (N = 21; n = 14 mothers, n = 7 fathers) of children aged 2–5 years participated in focus groups to identify commonly held beliefs about their decision to sun protect their child. Data were analysed using thematic content analysis. Results Parents generally had knowledge of the broad sun safe recommendations; however, the specific details of the recommendations were not always known. Parents reported adopting a range of sun-protective measures for their child, which depended on the time of year. A range of advantages (e.g. reducing the risk of skin cancer, developing good habits early and parental peace of mind), disadvantages (e.g. false sense of safety and preventing vitamin D absorption), barriers (e.g. child refusal) and facilitators (e.g. routine and accessibility) to performing sun safe practices were identified. Normative pressures and expectations also affected parents' motivation to be sun safe for their child. Conclusions These identified beliefs can be used to inform interventions to improve sun safe behaviours in young children who reside in a region that has the highest skin cancer incidence in the world.

Illuminating the glass box: The lighting designs of Richard Kelly

A promotional brochure celebrating the completion of the Seagram Building in spring 1957 features on its cover intense portraits of seven men bisected by a single line of bold text that asks, “Who are these Men?” The answer appears on the next page: “They Dreamed of a Tower of Light” (Figures 1, 2). Each photograph is reproduced with the respective man’s name and project credit: architects, Mies van der Rohe and Philip Johnson; associate architect, Eli Jacques Kahn; electrical contractor, Harry F. Fischbach; lighting consultant, Richard Kelly; and electrical engineer, Clifton E. Smith. To the right, a rendering of the new Seagram Tower anchors the composition, standing luminous against a star-speckled night sky; its glass walls and bronze mullions are transformed into a gossamer skin that reveals the tower’s structural skeleton. Lightolier, the contract lighting manufacturer, produced the brochure to promote its role in the lighting of the Seagram Building, but Lightolier’s promotional copy was not far from the truth.

Trust and Safe Choices: Coping with health-related risks in food consumption in St. Petersburg

This dissertation considers the problem of trust in the context of food consumption. The research perspectives refer to institutional conditions for consumer trust, personal practices of food consumption, and strategies consumers employ for controlling the safety of their food. The main concern of the study is to investigate consumer trust as an adequate response to food risks, i.e. a strategy helping the consumer to make safe choices in an uncertain food situation. "Risky" perspective serves as a frame of reference for understanding and explaining trust relations. The original aim of the study was to reveal the meanings applied to the concepts of trust, safety and risks in the perspective of market choices, the assessments of food risks and the ways of handling them. Supplementary research tasks presumed descriptions of institutional conditions for consumer trust, including descriptions of the food market, and the presentation of food consumption patterns in St. Petersburg. The main empirical material is based on qualitative interviews with consumers and interviews and group discussions with professional experts (market actors, representatives of inspection bodies and consumer organizations). Secondary material is used for describing institutional conditions for consumer trust and the market situation. The results suggest that the idea of consumer trust is associated with the reputation of suppliers, stable quality and taste of their products, and reliable food information. Being a subjectively constructed state connected to the act of acceptance, consumer trust results in positive buying decisions and stable preferences in the food market. The consumers' strategies that aim at safe food choices refer to repetitive interactions with reliable market actors that free them from constant consideration in the marketplace. Trust in food is highly mediated by trust in institutions involved in the food system. The analysis reveals a clear pattern of disbelief in the efficiency of institutional food control. The study analyses this as a reflection of "total distrust" that appears to be a dominant mood in many contexts of modern Russia. However, the interviewees emphasize the state's decisive role in suppressing risks in the food market. Also, the findings are discussed with reference to the consumers' possibilities of personal control over food risks. Three main responses to a risky food situation are identified: the reflexive approach, the traditional approach, and the fatalistic approach.