Crystallization and morphology of the PLLA phase within random poly (L-lactide-ran-ɛ-caprolactone)

This work has mainly focused on the poly (L-lactide) (PLLA) which is a material for multiple applications with performances comparable to those of petrochemical polymers (PP, PS, PET, etc. ...), readily recyclable and also compostable. However, PLLA has certain shortcomings that limit its applications. It is a brittle, hard polymer with a very low elongation at break, hydrophobic, exhibits low crystallization kinetics and takes a long time to degrade. The properties of PLLA may be modified by copolymerization (random, block, and graft) of L-lactide monomers with other co-monomers. In this thesis it has been studied the crystallization and morphology of random copolymers poly (L-lactide-ran-ε-caprolactone) with different compositions of the two monomers since the physical, mechanical, optical and chemical properties of a material depend on this behavior. Thermal analyses were performed by differential scanning calorimetry (DSC) and thermogravimetry (TGA) to observe behaviors due to the different compositions of the copolymers. The crystallization kinetics and morphology of poly (L-lactide-ran-ε-caprolactone) was investigated by polarized light optical microscopy (PLOM) and differential scanning calorimetry (DSC). Their thermal behavior was observed with crystallization from melt. It was observed that with increasing amounts of PCL in the copolymer, there is a decrease of the thermal degradation. Studies on the crystallization kinetics have shown that small quantities of PCL in the copolymer increase the overall crystallization kinetics and the crystal growth rate which decreases with higher quantities of PCL.

Examining the Justification for Residential Recycling

Municipalities in the United States have for the past two decades initiated two policies to reduce residential solid waste generation by increasing recycling. The first policy, implemented in over 4,000 municipalities in the United States, requires households to pay a fee for each unit of garbage presented at the curb for collection. The second policy, initiated in 8,875 municipalities, subsidizes household recycling efforts by providing free curbside collection of certain recyclable materials. Both initiatives serve as examples of incentive-based environmental policies favored by many economists. But before economists can celebrate this wide-spread adoption of incentive-based environmental policies, further examination reveals that potentially inefficient command and control policies have been more instrumental in promoting recycling than might be commonly known. This article examines the empirical lessons gained from studying twenty years of solid waste policy in the United States and argues for the replacement of several state recycling mandates with a system of state and/or national landfill taxes.

Optimal Solid Waste Policy with Centralized Recycling Opportunities

Economic models have demonstrated the efficiency of curbside collection taxes. This paper demonstrates that such efficiencies disappear in economies with centralized recycling options - where recyclable materials can be removed from the waste stream either by households or at a centralized recycling facility. In such economies a curbside garbage tax not only fails to encourage the centralized recycler to internalize the external costs of waste disposal, but introduces inefficiencies to the cost-minimizing mix of household and centralized recycling efforts. The optimal waste policy is a tax assessed further downstream at the landfill rather than at the curb.

Evaluating Bucknell's Waste Stream

This thesis examines three questions regarding the content of Bucknell University‟s waste stream and the contributors to campus recycling and solid waste disposal. The first asks, “What does Bucknell‟s waste stream consist of?” To answer this question, I designed a campus-wide waste audit procedure that sampled one dumpster from each of the eleven „activity‟ types on campus in order to better understand Bucknell‟s waste composition. The audit was implemented during the Fall semester of the 2011-2012 school year. The waste from each dumpster was sorted into several recyclable and non-recyclable categories and then weighed individually. Results showed the Bison and Carpenter Shop dumpsters to contain the highest percentage of divertible materials (through recycling and/or composting). When extrapolated, results also showed the Dining Services buildings and Facilities buildings to be the most waste dense in terms of pounds of waste generated per square foot. The Bison also generated the most overall waste by weight. The average composition of all dumpsters revealed that organic waste composed 24% of all waste, 23% was non-recyclable paper, and 20% was non-recyclable plastic. It will be important to move forward using these results to help create effective waste programs that target the appropriate areas of concern. My second question asks, “What influences waste behavior to contribute to this „picture‟ of the waste stream?” To answer this question, I created a survey that was sent out to randomly selected sub-group of the university‟s three constituencies: students, faculty, and staff. The survey sought responses regarding each constituency‟s solid waste disposal and recycling behavior, attitudes toward recycling, and motivating factors for solid waste disposal behaviors across different sectors of the university. Using regression analysis, I found three statistically significant motivating factors that influence solid waste disposal behavior: knowledge and awareness, moral value, and social norms. I further examined how a person‟s characteristics associate to these motivating factors and found that one‟s position on campus proved a significant association. Consistently, faculty and staff were strongly influenced by the aforementioned motivating factors, while students‟ behavior was less influenced by them. This suggests that new waste programs should target students to help increase the influence of these motivators to improve the recycling rate and lower overall solid waste disposal on campus. After making overall conclusions regarding the waste audit and survey, I ask my third question, which inquires, “What actions can Bucknell take to increase recycling rates and decrease solid waste generation?” Bucknell currently features several recycling and waste minimization programs on campus. However, using results from the waste audit and campus survey, we can better understand what are the issues of the waste stream, how do we go about addressing these issues, and who needs to be addressed. I propose several suggestions for projects that future students may take on for summer or thesis research. Suggestions include targeting the appropriate categories of waste that occur most frequently in the waste stream, as well as the building types that have the highest waste density and potential recovery rates. Additionally, certain groups on campus should be targeted more directly than others, namely the student body, which demonstrates the lowest influence by motivators of recycling and waste behavior. Several variables were identified as significant motivators of waste and recycling behavior, and could be used as program tactics to encourage more effective behavior.

Determining the Socially Optimal Recycling Rate

What municipal recycling rate is socially optimal? One credible answer would consider the recycling rate that minimizes the overall social costs of managing municipal waste. Such social costs are comprised of all budgetary costs and revenues associated with operating municipal waste and recycling programs, all costs to recycling households associated with preparing and storing recyclable materials for collection, all external disposal costs associated with waste disposed at landfills or incinerators, and all external benefits associated with the provision of recycled materials that foster environmentally efficient production processes. This paper discusses how to estimate these four components of social cost to then estimate the optimal recycling rate. (C) 2013 Elsevier B.V. All rights reserved.

Twelve factors influencing sustainable recycling of municipal solid waste in developing countries

Sustainable management of solid waste is a global concern, as exemplified by the United Nations Millennium Development Goals (MDG) that 191 member states support. The seventh MDG indirectly advocates for municipal solid waste management (MSWM) by aiming to ensure environmental sustainability into countries’ policies and programs and reverse negative environmental impact. Proper MSWM will likely result in relieving poverty, reducing child mortality, improving maternal health, and preventing disease, which are MDG goals one, four, five, and six, respectively (UNMDG, 2005). Solid waste production is increasing worldwide as the global society strives to obtain a decent quality of life. Several means exist in which the amount of solid waste going to a landfill can be reduced, such as incineration with energy production, composting of organic wastes, and material recovery through recycling, which are all considered sustainable methods by which to manage MSW. In the developing world, composting is already a widely-accepted method to reduce waste fated for the landfill, and incineration for energy recovery can be a costly capital investment for most communities. Therefore, this research focuses on recycling as a solution to the municipal solid waste production problem while considering the three dimensions of sustainability environment, society, and economy. First, twenty-three developing country case studies were quantitatively and qualitatively examined for aspects of municipal solid waste management. The municipal solid waste (MSW) generation and recovery rates, as well as the composition were compiled and assessed. The average MSW generation rate was 0.77 kg/person/day, with recovery rates varying from 5 – 40%. The waste streams of nineteen of these case studies consisted of 0 – 70% recyclable material and 17 – 80% organic material. All twenty-three case studies were analyzed qualitatively by identifying any barriers or incentives to recycling, which justified the creation of twelve factors influencing sustainable municipal solid waste management (MSWM) in developing countries. The presence of regulations, enforcement of laws, and use of incentive schemes constitutes the first factor, Government Policy. Cost of MSWM operations, the budget allocated to MSWM by local to national governments, as well as the stability and reliability of funds comprise the Government Finances factor influencing recycling in the third world. Many case studies indicated that understanding features of a waste stream such as the generation and recovery rates and composition is the first measure in determining proper management solutions, which forms the third factor Waste Characterization. The presence and efficiency of waste collection and segregation by scavengers, municipalities, or private contractors was commonly addressed by the case studies, which justified Waste Collection and Segregation as the fourth factor. Having knowledge of MSWM and an understanding of the linkages between human behavior, waste handling, and health/sanitation/environment comprise the Household Education factor. Individuals’ income influencing waste handling behavior (e.g., reuse, recycling, and illegal dumping), presence of waste collection/disposal fees, and willingness to pay by residents were seen as one of the biggest incentives to recycling, which justified them being combined into the Household Economics factor. The MSWM Administration factor was formed following several references to the presence and effectiveness of private and/or public management of waste through collection, recovery, and disposal influencing recycling activity. Although the MSWM Personnel Education factor was only recognized by six of the twenty-two case studies, the lack of trained laborers and skilled professionals in MSWM positions was a barrier to sustainable MSWM in every case but one. The presence and effectiveness of a comprehensive, integrative, long-term MSWM strategy was highly encouraged by every case study that addressed the tenth factor, MSWM Plan. Although seemingly a subset of private MSWM administration, the existence and profitability of market systems relying on recycled-material throughput, involvement of small businesses, middlemen, and large industries/exporters is deserving of the factor Local Recycled-Material Market. Availability and effective use of technology and/or human workforce and the safety considerations of each were recurrent barriers and incentives to recycling to warrant the Technological and Human Resources factor. The Land Availability factor takes into consideration land attributes such as terrain, ownership, and development which can often times dictate MSWM. Understanding the relationships among the twelve factors influencing recycling in developing countries, made apparent the collaborative nature required of sustainable MSWM. Factors requiring the greatest collaborative inputs include waste collection and segregation, MSWM plan, and local recycled-material market. Aligning each factor to the societal, environmental, and economic dimensions of sustainability revealed the motives behind the institutions contributing to each factor. A correlation between stakeholder involvement and sustainability existed, as supported by the fact that the only three factors driven by all three dimensions of sustainability were the same three that required the greatest collaboration with other factors. With increasing urbanization, advocating for improved health for all through the MDG, and changing consumption patterns resulting in increasing and more complex waste streams, the utilization of the collaboration web offered by this research is ever needed in the developing world. Through its use, the institutions associated with each of the twelve factors can achieve a better understanding of the collaboration necessary and beneficial for more sustainable MSWM.

Does Quality Matter in the Iron and Scrap Trade?

This paper sheds light on the iron and steel (IS) scrap trade to examine how economic development affects the quality demanded of recyclable resource. A simple model is presented that show a mechanism of how scrap quality impacts the direction of trade due to comparative advantage. We find that economic development in both importing and exporting countries has a positive effect on the quality of traded recyclables. Developed countries that intend to improve the domestic recovery of recyclables should raise the quality of separating recyclables while developing countries should tighten environmental regulations to help decrease the import of recyclables that cause pollution.

Determinación de propiedades de inflamabilidad de mezclas para co-combustión

La recuperación de energía a partir de biomasa y residuos no reciclables por la combustión está cobrando una notable importancia actualmente. Una de las técnicas más utilizadas para esta propuesta es la co-combustión de mezclas de residuos y biomasa. Con esta nueva tecnología, mezclas de diferentes materiales han aparecido en las instalaciones industriales y tienen que ser reconocidas como nuevos combustibles, debido a que a sus propiedades son aún desconocidas. Estas propiedades incluyen las energéticas, que son el objetivo del proceso de mezcla, y también las propiedades de inflamabilidad. Residuos y biomasa en forma de polvos tienen propiedades de ignición que se han de tener en cuenta a la hora de diseñar las medidas de prevención y protección en una instalación industrial. El objetivo principal de este estudio es determinar el riesgo de ignición de las mezclas de residuos / biomasa en capas y cómo, mediante la adición de diferentes cantidades de estos materiales, este riesgo puede cambiar. Para desarrollar este estudio, se utiliza la temperatura mínima de ignición en la capa. Tres muestras diferentes han sido analizadas, lodos con secado térmico de depuradora, paja de trigo y virutas de madera, Abstract Energy recovery from biomass and non-recyclable waste products by combustion has become important. One of the most used techniques for this proposal is the co-firing of waste and biomass mixtures, With this new technology, mixtures of different materials have appeared in the industrial facilities and they have to be treated as new fuels because their properties are unknown. Among this properties we include energetic properties that are the objective of the mixing process, and also the ignitability properties. Waste and biomass dusts have ignition properties that have to be taken into account in the design but also in the, prevention and protection process of an industrial facility.. The main objective of this research is to determine the risk of ignition of waste / biomass mixtures layers and how, by adding different quantities of these materials, this risk may vary. To develop this, the minimum ignition temperature on layer is used. Three different samples have been analysed, thermally dried sewage sludge, wheat straw and wood chips.

QUALIDADE DE VIDA DE PARTICIPANTES DE PROGRAMAS DE ECONOMIA SOLIDÁRIA

Este estudo buscou estudar qualidade de vida em indivíduos que trabalhavam em cooperativas com a filosofia da Economia Solidária. Mais especificamente procurou: levantar o perfil sócio econômico cultural e demográfico de indivíduos adultos integrantes de programas de Economia Solidária; avaliar a qualidade de vida desses indivíduos integrantes de programas; descrever a compreensão desses trabalhadores sobre o conceito de qualidade de vida. Participaram desse estudo 69 pessoas, trabalhadores de três cooperativas distintas de catadores de lixo reciclável. Foi aplicado um questionário elaborado especialmente para esse estudo contendo dados de identificação dos participantes, com o propósito de fazer um levantamento relativo aos dados sócioeconômicos, culturais e demográficos e, nesse questionário foi agregado o critério de classificação de renda e classe social da Associação Brasileira dos Institutos de Pesquisa - ABIPEME e utilizou-se a Escala de Qualidade de vida Whoqol Bref . Verificou-se, que os trabalhadores apresentaram um bom nível de qualidade de vida. Em relação aos dados sócio-econômicos culturais, observou-se um predomínio da presença de mulheres, solteiras ou com parceiros, mas com filhos. Com relação aos domínios que compõem Qualidade de Vida, houve uma correlação significativa entre os domínios físico e psicológico e também uma correlação entre os domínios: psicológico e de relações sociais. Por outro lado, o domínio meio ambiente foi o que apresentou um índice menor de qualidade de vida em relação aos demais. Levanta-se a hipótese de que o fato dos cooperados estarem insatisfeitos com seus ganhos, por os considerarem insuficientes, acrescido de suas condições de moradia serem precárias, além da maioria ser oriunda de um sistema econômico competitivo e individualista e não terem ainda a devida adaptação que esse novo sistema exige, interferiram no domínio meio ambiente de forma negativa..(AU)

QUALIDADE DE VIDA DE PARTICIPANTES DE PROGRAMAS DE ECONOMIA SOLIDÁRIA

Este estudo buscou estudar qualidade de vida em indivíduos que trabalhavam em cooperativas com a filosofia da Economia Solidária. Mais especificamente procurou: levantar o perfil sócio econômico cultural e demográfico de indivíduos adultos integrantes de programas de Economia Solidária; avaliar a qualidade de vida desses indivíduos integrantes de programas; descrever a compreensão desses trabalhadores sobre o conceito de qualidade de vida. Participaram desse estudo 69 pessoas, trabalhadores de três cooperativas distintas de catadores de lixo reciclável. Foi aplicado um questionário elaborado especialmente para esse estudo contendo dados de identificação dos participantes, com o propósito de fazer um levantamento relativo aos dados sócioeconômicos, culturais e demográficos e, nesse questionário foi agregado o critério de classificação de renda e classe social da Associação Brasileira dos Institutos de Pesquisa - ABIPEME e utilizou-se a Escala de Qualidade de vida Whoqol Bref . Verificou-se, que os trabalhadores apresentaram um bom nível de qualidade de vida. Em relação aos dados sócio-econômicos culturais, observou-se um predomínio da presença de mulheres, solteiras ou com parceiros, mas com filhos. Com relação aos domínios que compõem Qualidade de Vida, houve uma correlação significativa entre os domínios físico e psicológico e também uma correlação entre os domínios: psicológico e de relações sociais. Por outro lado, o domínio meio ambiente foi o que apresentou um índice menor de qualidade de vida em relação aos demais. Levanta-se a hipótese de que o fato dos cooperados estarem insatisfeitos com seus ganhos, por os considerarem insuficientes, acrescido de suas condições de moradia serem precárias, além da maioria ser oriunda de um sistema econômico competitivo e individualista e não terem ainda a devida adaptação que esse novo sistema exige, interferiram no domínio meio ambiente de forma negativa..(AU)

Pursuing Chemical Efficiency by Using Supported Organocatalysts for Asymmetric Reactions under Aqueous Conditions

Over the past decade, a great effort has been made by the chemical community to improve the efficiency of organic transformations and allow sustainable processes. Merging the use of supported and recyclable organocatalysts and aqueous conditions for the asymmetric synthesis of valuable molecules, has led to outstanding contributions in the area of green chemistry. Recent progresses in the field include the implementation of these methodologies in the large scale production of chiral molecules using automated flow chemistry.

Gold Nanoparticles Supported on Polyacrylamide Containing a Phosphorus Ligand as an Efficient Heterogeneous Catalyst for Three-Component Synthesis of Propargylamines in Water

Gold nanoparticles supported on a polyacrylamide containing a phosphinite ligand have been synthesized and characterized using different techniques such as TEM, SEM, EDX, XPS, and solid UV analyses. The new material was successfully applied as a heterogeneous catalyst for the three-component A3 coupling of amines, aldehydes, and alkynes to give propargylamines. Reactions are performed in neat water at 80 °C with only 0.05 mol% catalyst loading. The heterogeneous catalyst is recyclable during seven consecutive runs with small decrease in activity.

Synthesis of monocyclic and linear polystyrene using the reversible coupling/cleavage of thiol/disulfide groups

By carefully controlling the concentration of alpha,omega-thiol polystyrene in solution, we achieved formation of unique monocyclic polystyrene chains (i.e., polymer chains with only one disulfide linkage). The presence of cyclic polystyrene was confirmed by its lower than expected molecular weight due to a lower hydrodynamic volume and loss of thiol groups as detected by using Ellman's reagent. The alpha,omega-thiol polystyrene was synthesized by polymerizing styrene in the presence of a difunctional RAFT agent and subsequent conversion of the dithioester end groups to thiols via the addition of hexylamine. Oxidation gave either monocyclic polymer chains (i.e., with only one disulfide linkage) or linear multiblock polymers with many disulfide linkages depending on the concentration of polymer used with greater chance of cyclization in more dilute solutions. At high polymer concentrations, linear multiblock polymers were formed. To control the MWD of these linear multiblocks, monofunctional X-PSTY (X = PhCH2C(S)-S-) was added. It was found that the greatest ratio of X-PSTY to X-PSTY-X resulted in a low M-n and PDI. We have shown that we can control both the structure and MWD using this chemistry, but more importantly such disulfide linkages can be readily reduced back to the starting polystyrene with thiol end groups, which has potential use for a recyclable polymer material.

QUALIDADE DE VIDA DE PARTICIPANTES DE PROGRAMAS DE ECONOMIA SOLIDÁRIA

Este estudo buscou estudar qualidade de vida em indivíduos que trabalhavam em cooperativas com a filosofia da Economia Solidária. Mais especificamente procurou: levantar o perfil sócio econômico cultural e demográfico de indivíduos adultos integrantes de programas de Economia Solidária; avaliar a qualidade de vida desses indivíduos integrantes de programas; descrever a compreensão desses trabalhadores sobre o conceito de qualidade de vida. Participaram desse estudo 69 pessoas, trabalhadores de três cooperativas distintas de catadores de lixo reciclável. Foi aplicado um questionário elaborado especialmente para esse estudo contendo dados de identificação dos participantes, com o propósito de fazer um levantamento relativo aos dados sócioeconômicos, culturais e demográficos e, nesse questionário foi agregado o critério de classificação de renda e classe social da Associação Brasileira dos Institutos de Pesquisa - ABIPEME e utilizou-se a Escala de Qualidade de vida Whoqol Bref . Verificou-se, que os trabalhadores apresentaram um bom nível de qualidade de vida. Em relação aos dados sócio-econômicos culturais, observou-se um predomínio da presença de mulheres, solteiras ou com parceiros, mas com filhos. Com relação aos domínios que compõem Qualidade de Vida, houve uma correlação significativa entre os domínios físico e psicológico e também uma correlação entre os domínios: psicológico e de relações sociais. Por outro lado, o domínio meio ambiente foi o que apresentou um índice menor de qualidade de vida em relação aos demais. Levanta-se a hipótese de que o fato dos cooperados estarem insatisfeitos com seus ganhos, por os considerarem insuficientes, acrescido de suas condições de moradia serem precárias, além da maioria ser oriunda de um sistema econômico competitivo e individualista e não terem ainda a devida adaptação que esse novo sistema exige, interferiram no domínio meio ambiente de forma negativa..(AU)

Organic reactions in ionic liquids: cyclocondensation of alpha-bromoketones with 2-aminopyridine

The room temperature ionic liquid 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMImBF4), is used as a `green` recyclable alternative to classical molecular solvents for the cyclocondensation of a-bromoketones with 2-aminopyridine to form 2-arylimidazo[1,2-a]pyridines with rate accelerations and improved yields.