Sperm production of Steidachneridion parahybae (Steindachner 1877) and the effect of hormonal induction throughout one reproductive cycle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Life cycle assessment of sugarcane ethanol and palm oil biodiesel joint production

Sugarcane (Saccharum spp.) and palm tree (Elaeis guianeensis) are crops with high biofuel yields, 7.6 m(3) ha (1) y(-)1 of ethanol and 4 Mg ha(-1) y(-1) of oil, respectively. The joint production of these crops enhances the sustainability of ethanol. The objective of this work was comparing a traditional sugarcane ethanol production system (TSES) with a joint production system (JSEB), in which ethanol and biodiesel are produced at the same biorefinery but only ethanol is traded. The comparison is based on ISO 14.040:2006 and ISO 14044:2006, and appropriate indicators. Production systems in Cerrado (typical savannah), Cerradao (woody savannah) and pastureland ecosystems were considered. Energy and carbon balances, and land use change impacts were evaluated. The joint system includes 100% substitution of biodiesel for diesel, which is all consumed in different cropping stages. Data were collected by direct field observation methods, and questionnaires applied to Brazilian facilities. Three sugarcane mills situated in Sao Paulo State and one palm oil refinery located in Para State were surveyed. The information was supplemented by secondary sources. Results demonstrated that fossil fuel use and greenhouse gas emissions decreased, whereas energy efficiency increased when JSEB was compared to TSES. In comparison with TSES, the energy balance of JSEB was 1.7 greater. In addition, JSEB released 23% fewer GHG emissions than TSES. The ecosystem carbon payback time for Cerrado, Cerradao, and Degraded Grassland of JSEB was respectively 4, 7.7 and -7.6 years. These are typical land use types of the Brazilian Cerrado region for which JSEB was conceived. (C) 2012 Elsevier Ltd. All rights reserved.

Life cycle assessment of biodiesel production from micro-algae: a case study in Denmark

Le sperimentazioni riguardanti la produzione di biodiesel da alghe sono state condotte solo in laboratorio o in impianti pilota e il processo produttivo non è ancora stato sviluppato su scala industriale. L’obiettivo di questo lavoro di tesi è stato quello di valutare la potenziale sostenibilità ambientale ed energetica della produzione industriale di biodiesel da microalghe nella realtà danese ipotizzando la coltivazione in fotobioreattori. La tesi ha analizzato le diverse tecnologie attualmente in sperimentazione cercando di metterne in evidenza punti di forza e punti di debolezza. La metodologia applicata in questa tesi per valutare la sostenibilità ambientale ed energetica dei processi analizzati è LCA strumento che permette di effettuare la valutazione sull’intero ciclo di vita di un prodotto o di un processo. L’unità funzionale scelta è 1 MJ di biodiesel. I confini del sistema analizzato comprendono: coltivazione, raccolta, essicazione, estrazione dell’olio, transesterificazione, digestione anaerobica della biomassa residuale e uso del glicerolo ottenuto come sottoprodotto della transesterificazione. Diverse categorie d’impatto sono state analizzate. In questo caso studio, sono stati ipotizzati 24 diversi scenari differenziati in base alle modalità di coltivazione, di raccolta della biomassa, di estrazione dell’olio algale. 1. la produzione di biodiesel da microalghe coltivate in fotobioreattori non appare ancora conveniente né dal punto di vista energetico né da quello ambientale. 2. l’uso di CO2 di scarto e di acque reflue per la coltivazione, fra l’altro non ancora tecnicamente realizzabili, migliorerebbero le prestazioni energetiche ed ambientali del biodiesel da microalghe 3. la valorizzazione di prodotti secondari svolge un ruolo importante nel processo e nel suo sviluppo su larga scala Si conclude ricordando che il progetto di tesi è stato svolto in collaborazione con la Danish Technical University of Denmark (DTU) svolgendo presso tale università un periodo di tirocinio per tesi di sei mesi

Design of an indirectly fired gas turbine integrated with an organic rankine cycle unit for combined heat and power production

In the last years, the European countries have paid increasing attention to renewable sources and greenhouse emissions. The Council of the European Union and the European Parliament have established ambitious targets for the next years. In this scenario, biomass plays a prominent role since its life cycle produces a zero net carbon dioxide emission. Additionally, biomass can ensure plant operation continuity thanks to its availability and storage ability. Several conventional systems running on biomass are available at the moment. Most of them are performant either in the large-scale or in the small power range. The absence of an efficient system on the small-middle scale inspired this thesis project. The object is an innovative plant based on a wet indirectly fired gas turbine (WIFGT) integrated with an organic Rankine cycle (ORC) unit for combined heat and power production. The WIFGT is a performant system in the small-middle power range; the ORC cycle is capable of giving value to low-temperature heat sources. Their integration is investigated in this thesis with the aim of carrying out a preliminary design of the components. The targeted plant output is around 200 kW in order not to need a wide cultivation area and to avoid biomass shipping. Existing in-house simulation tools are used: They are adapted to this purpose. Firstly the WIFGT + ORC model is built; Zero-dimensional models of heat exchangers, compressor, turbines, furnace, dryer and pump are used. Different fluids are selected but toluene and benzene turn out to be the most suitable. In the indirectly fired gas turbine a pressure ratio around 4 leads to the highest efficiency. From the thermodynamic analysis the system shows an electric efficiency of 38%, outdoing other conventional plants in the same power range. The combined plant is designed to recover thermal energy: Water is used as coolant in the condenser. It is heated from 60°C up to 90°C, ensuring the possibility of space heating. Mono-dimensional models are used to design the heat exchange equipment. Different types of heat exchangers are chosen depending on the working temperature. A finned-plate heat exchanger is selected for the WIFGT heat transfer equipment due to the high temperature, oxidizing and corrosive environment. A once-through boiler with finned tubes is chosen to vaporize the organic fluid in the ORC. A plate heat exchanger is chosen for the condenser and recuperator. A quasi-monodimensional model for single-stage axial turbine is implemented to design both the WIFGT and the ORC turbine. The system simulation after the components design shows an electric efficiency around 34% with a decrease by 10% compared to the zero-dimensional analysis. The work exhibits the system potentiality compared to the existing plants from both technical and economic point of view.

Climate-induced interannual variability of marine primary and export production in three global coupled climate carbon cycle models

Fully coupled climate carbon cycle models are sophisticated tools that are used to predict future climate change and its impact on the land and ocean carbon cycles. These models should be able to adequately represent natural variability, requiring model validation by observations. The present study focuses on the ocean carbon cycle component, in particular the spatial and temporal variability in net primary productivity (PP) and export production (EP) of particulate organic carbon (POC). Results from three coupled climate carbon cycle models (IPSL, MPIM, NCAR) are compared with observation-based estimates derived from satellite measurements of ocean colour and results from inverse modelling (data assimilation). Satellite observations of ocean colour have shown that temporal variability of PP on the global scale is largely dominated by the permanently stratified, low-latitude ocean (Behrenfeld et al., 2006) with stronger stratification (higher sea surface temperature; SST) being associated with negative PP anomalies. Results from all three coupled models confirm the role of the low-latitude, permanently stratified ocean for anomalies in globally integrated PP, but only one model (IPSL) also reproduces the inverse relationship between stratification (SST) and PP. An adequate representation of iron and macronutrient co-limitation of phytoplankton growth in the tropical ocean has shown to be the crucial mechanism determining the capability of the models to reproduce observed interactions between climate and PP.

IMMUNOLOGICAL AND CYTOLOGICAL INVESTIGATION OF GAMMA INTERFERON PRODUCTION IN HUMAN T-LYMPHOCYTES INDUCED BY PMA AND PHA (IMMUNOGOLD, CELL CYCLE ANALYSIS)

The present study examined cellular mechanisms involved in the production and secretion of human (gamma)IFN. The hypothesis of this investigation was that (gamma)IFN is an export glycoprotein whose synthesis in human T lymphocytes is dependent on membrane stimulation, polypeptide synthesis in the rough endoplasmic reticulum, packaging in the Golgi complex, and release from the cell by exocytosis.^ The model system for this examination utilized T lymphocytes from normal donors and patients with chronic lymphocytic leukemia (CLL) induced in vitro with the tumor promoter, phorbol 12-myristate 13-acetate (PMA) and the lectin, phytohemagglutinin (PHA) to produce (gamma)IFN. This study reconfirmed the ability of PMA and PHA to synergistically induce (gamma)IFN production in normal T lymphocytes, as measured by viral inhibition assays and radio-immunoassays for (gamma)IFN. The leukemic T cells were demonstrated to produce (gamma)IFN in response to treatment with PHA. PMA treatment also induced (gamma)IFN production in the leukemic T cells, which was much greater than that observed in similarly treated normal T cells. In these same cells, however, combined treatment of the agents was shown to be ineffective at inducing (gamma)IFN production beyond the levels stimulated by the individual agents. In addition, the present study reiterated the synergistic effect of PMA/PHA on the stimulation of growth kinetics in normal T cells. The cell cycle of the leukemic T cells was also responsive to treatment with the agents, particularly with PMA treatment. A number of morphological alterations were attributed to PMA treatment including the acquisition of an elongated configuration, nuclear folds, and large cytoplasmic vacuoles. Many of the effects were observed to be reversible with dilution of the agents, and reversion to this state occurred more rapidly in the leukemic T cells. Most importantly, utilization of a thin section immuno-colloidal gold labelling technique for electron microscopy provided, for the first time, direct evidence of the cellular mechanism of (gamma)IFN production and secretion. The results of this latter study support the idea that (gamma)IFN is produced in the rough endoplasmic reticulum, transferred to the Golgi complex for accumulation and packaging, and released from the T cells by exocytosis. ^

Genetic engineering of carbohydrate biosynthetic pathways in transgenic mice demonstrates cell cycle-associated regulation of glycoconjugate production in small intestinal epithelial cells.

Proliferation, migration-associated differentiation, and cell death occur continuously and in a spatially well-organized fashion along the crypt-villus axis of the mouse small intestine, making it an attractive system for studying how these processes are regulated and interrelated. A pathway for producing glycoconjugates was engineered in adult FVB/N transgenic mice by expressing a human alpha 1,3/4-fucosyltransferase (alpha 1,3/4-FT; EC 2.4.1.65) along the length of this crypt-villus axis. The alpha 1,3/4-FT can use lacto-N-tetraose or lacto-neo-N-tetraose core chains to generate Lewis (Le) blood group antigens Le(a) or Le(x), respectively, and H type 1 or H type 2 core chains to produce Leb and Le(y). Single- and multilabel immunohistochemical studies revealed that expression of the alpha 1,3/4-FT results in production of Le(a) and Leb antigens in both undifferentiated proliferated crypt cells and in differentiated postmitotic villus-associated epithelial cells. In contrast, Le(x) antigens were restricted to crypt cells. Villus enterocytes can be induced to reenter the cell cycle by expression of simian virus 40 tumor antigen under the control of a promoter that only functions in differentiated members of this lineage. Bitransgenic animals, generated from a cross of FVB/N alpha 1,3/4-FT with FVB/N simian virus 40 tumor antigen mice, expand the range of Le(x) expression to include villus-associated enterocytes that have reentered the cell cycle. Thus, the fucosylations unveil a proliferation-dependent switch in oligosaccharide production, as defined by a monoclonal antibody specific for the Le(x) epitope. These findings show that genetic engineering of oligosaccharide biosynthetic pathways can be used to define markers for entry into, or progression through, the cell cycle and to identify changes in endogenous carbohydrate metabolism that occur when proliferative status is altered in a manner that is not deleterious to the system under study.

Rates of organic matter transformation within the production-destruction cycle of the White Sea

Rates of organic matter (OM) transformation within the production-destruction cycle of the White Sea were estimated on the basis of measured activity values of redox enzymes of the electron transport system and of hydrolytic enzymes (phosphatase and protease). It was found that OM oxidation processes were the most intensive in the Kandalaksha Bay, while minimum oxidation rates were characteristic of central parts of the Dvina and Onega bays. It was revealed that the highest rates of phosphate mineralization were characteristic of the central part of the sea and near-mouth areas of the Onega and Kandalaksha bays, with the lowest rates in the Dvina Bay. During the period of intense primary production when resources of inorganic phosphorus were practically depleted, high rates of phosphate regeneration were observed. It was shown that populations of micro- and zooplankton in the White Sea were characterized by low activation energies of the principal metabolism reactions (3-6 kcal/mol), which allowed these populations to provide exchange intensity comparable to that of inhabitants of warm waters during all the seasons.

Le cycle hydrosocial et la fluoration de l'eau : la production des eaux fluorées

La fluoration artificielle de l’eau est une méthode employée en tant que moyen de prévention de la carie dentaire. Il s’agit d’un traitement de l’eau dont le but est d’ajuster de façon « optimale » la concentration en fluorure dans l’eau potable pour la prévention de la carie dentaire, par l’ajout d’un composé fluoré. La fluoration de l’eau fait l’objet d’un débat de société depuis le début des années 1950. La théorie du cycle hydrosocial nous invite à réfléchir sur la manière dont l’eau et la société se définissent et se redéfinissent mutuellement dans le temps et dans l’espace. Cette théorie nous permet d’aborder l’étude du sujet de la fluoration avec une nouvelle perspective d’analyse. Il y a peu d’études en sciences sociales qui portent sur le sujet de la fluoration, généralement abordé d’un point de vue des sciences de la santé. Nous proposons de décrire le processus de production des eaux fluorées dans un contexte hydrosocial. Ce mémoire est structuré en quatre chapitres. Nous commençons par familiariser le lecteur avec la théorie du cycle hydrosocial. Ensuite, nous faisons une mise en contexte de la fluoration de l’eau, d’une part en présentant un état des lieux, et d’autre part en présentant ce en quoi consiste la pratique de la fluoration de l’eau. Après avoir familiarisé le lecteur avec les thèmes généraux concernant la fluoration de l’eau, nous proposons de reconstituer une histoire hydrosociale de la fluoration. Cette histoire nous permet de mettre en évidence les relations hydrosociales desquelles découle la production des eaux fluorées. L’histoire hydrosociale de la fluoration comporte une phase contemporaine que nous abordons en présentant les principales idées de l’opposition à la fluoration artificielle de l’eau à l’aide notamment d’une analyse iconographique d’images portant sur le thème de la fluoration. Finalement, nous discutons des implications de la théorie du cycle hydrosocial pour étudier la problématique de la fluoration.

Techno-Economic and Life Cycle Assessment for the Production of Green Composites

Botanically, green composites belong to an economically important seed plant family that includes maize, wheat, rice, and sorghum known as Saccharum offi cinarum. There are so many natural fibers available in the environment such as rice husk, hemp fibers, flax fibers, bamboo fibers, coconut fiber, coconut coir, grawia optiva and many others also. Life Cycle Assessment (LCA) is a process to estimate the environmental feature and potential impacts related to a product, by organizing a directory of pertinent inputs and outputs of a product system, assessing the potential environmental impacts related with the said inputs and outputs, explaining the results of the inventory analysis and impact evaluation phases in connection to the objectives of the study. Particularly Bagasse, an agricultural residue not only becomes a problem from the environmental point of view, but also affects the profitability of the sugarcane industries. This chapter discusses the properties, processing methods and various other aspects including economic and environmental aspects related to green composites.

Life cycle assessment of advanced bioethanol production from pulp and paper sludge

This work evaluates the environmental performance of using pulp and paper sludge as feedstock for the production of second generation ethanol. An ethanol plant for converting 5400 tons of dry sludge/year was modelled and evaluated using a cradle-to-gate life cycle assessment approach. The sludge is a burden for pulp and paper mills that is mainly disposed in landfilling. The studied system allows for the valorisation of the waste, which due to its high polysaccharide content is a valuable feedstock for bioethanol production. Eleven impact categories were analysed and the results showed that enzymatic hydrolysis and neutralisation of the CaCO3 are the environmental hotspots of the system contributing up to 85% to the overall impacts. Two optimisation scenarios were evaluated: (1) using a reduced HCl amount in the neutralisation stage and (2) co-fermentation of xylose and glucose, for maximal ethanol yield. Both scenarios displayed significant environmental impact improvements.

L’acquisition précoce de la langue française àtravers des exercices de compréhension et production órale chez les enfants du premier cycle à l’ecole « La Candelaria » IED

Tesis (Licenciado en Lenguas Castellana, Inglés y Francés).--Universidad de La Salle. Facultad de Ciencias de La Educación. Licenciatura en Lengua Castellana, Inglés y Francés, 2014