Analysis and modelling of chemical looping combustion process with and without oxygen uncoupling

Effective control and limiting of carbon dioxide (CO₂) emissions in energy production are major challenges of science today. Current research activities include the development of new low-cost carbon capture technologies, and among the proposed concepts, chemical combustion (CLC) and chemical looping with oxygen uncoupling (CLOU) have attracted significant attention allowing intrinsic separation of pure CO₂ from a hydrocarbon fuel combustion process with a comparatively small energy penalty. Both CLC and CLOU utilize the well-established fluidized bed technology, but several technical challenges need to be overcome in order to commercialize the processes. Therefore, development of proper modelling and simulation tools is essential for the design, optimization, and scale-up of chemical looping-based combustion systems. The main objective of this work was to analyze the technological feasibility of CLC and CLOU processes at different scales using a computational modelling approach. A onedimensional fluidized bed model frame was constructed and applied for simulations of CLC and CLOU systems consisting of interconnected fluidized bed reactors. The model is based on the conservation of mass and energy, and semi-empirical correlations are used to describe the hydrodynamics, chemical reactions, and transfer of heat in the reactors. Another objective was to evaluate the viability of chemical looping-based energy production, and a flow sheet model representing a CLC-integrated steam power plant was developed. The 1D model frame was succesfully validated based on the operation of a 150 kWth laboratory-sized CLC unit fed by methane. By following certain scale-up criteria, a conceptual design for a CLC reactor system at a pre-commercial scale of 100 MWth was created, after which the validated model was used to predict the performance of the system. As a result, further understanding of the parameters affecting the operation of a large-scale CLC process was acquired, which will be useful for the practical design work in the future. The integration of the reactor system and steam turbine cycle for power production was studied resulting in a suggested plant layout including a CLC boiler system, a simple heat recovery setup, and an integrated steam cycle with a three pressure level steam turbine. Possible operational regions of a CLOU reactor system fed by bituminous coal were determined via mass, energy, and exergy balance analysis. Finally, the 1D fluidized bed model was modified suitable for CLOU, and the performance of a hypothetical 500 MWth CLOU fuel reactor was evaluated by extensive case simulations.

Value of Information Logistics Integration in Digital Business Ecosystem

Digital business ecosystems (DBE) are becoming an increasingly popular concept for modelling and building distributed systems in heterogeneous, decentralized and open environments. Information- and communication technology (ICT) enabled business solutions have created an opportunity for automated business relations and transactions. The deployment of ICT in business-to-business (B2B) integration seeks to improve competitiveness by establishing real-time information and offering better information visibility to business ecosystem actors. The products, components and raw material flows in supply chains are traditionally studied in logistics research. In this study, we expand the research to cover the processes parallel to the service and information flows as information logistics integration. In this thesis, we show how better integration and automation of information flows enhance the speed of processes and, thus, provide cost savings and other benefits for organizations. Investments in DBE are intended to add value through business automation and are key decisions in building up information logistics integration. Business solutions that build on automation are important sources of value in networks that promote and support business relations and transactions. Value is created through improved productivity and effectiveness when new, more efficient collaboration methods are discovered and integrated into DBE. Organizations, business networks and collaborations, even with competitors, form DBE in which information logistics integration has a significant role as a value driver. However, traditional economic and computing theories do not focus on digital business ecosystems as a separate form of organization, and they do not provide conceptual frameworks that can be used to explore digital business ecosystems as value drivers—combined internal management and external coordination mechanisms for information logistics integration are not the current practice of a company’s strategic process. In this thesis, we have developed and tested a framework to explore the digital business ecosystems developed and a coordination model for digital business ecosystem integration; moreover, we have analysed the value of information logistics integration. The research is based on a case study and on mixed methods, in which we use the Delphi method and Internetbased tools for idea generation and development. We conducted many interviews with key experts, which we recoded, transcribed and coded to find success factors. Qualitative analyses were based on a Monte Carlo simulation, which sought cost savings, and Real Option Valuation, which sought an optimal investment program for the ecosystem level. This study provides valuable knowledge regarding information logistics integration by utilizing a suitable business process information model for collaboration. An information model is based on the business process scenarios and on detailed transactions for the mapping and automation of product, service and information flows. The research results illustrate the current cap of understanding information logistics integration in a digital business ecosystem. Based on success factors, we were able to illustrate how specific coordination mechanisms related to network management and orchestration could be designed. We also pointed out the potential of information logistics integration in value creation. With the help of global standardization experts, we utilized the design of the core information model for B2B integration. We built this quantitative analysis by using the Monte Carlo-based simulation model and the Real Option Value model. This research covers relevant new research disciplines, such as information logistics integration and digital business ecosystems, in which the current literature needs to be improved. This research was executed by high-level experts and managers responsible for global business network B2B integration. However, the research was dominated by one industry domain, and therefore a more comprehensive exploration should be undertaken to cover a larger population of business sectors. Based on this research, the new quantitative survey could provide new possibilities to examine information logistics integration in digital business ecosystems. The value activities indicate that further studies should continue, especially with regard to the collaboration issues on integration, focusing on a user-centric approach. We should better understand how real-time information supports customer value creation by imbedding the information into the lifetime value of products and services. The aim of this research was to build competitive advantage through B2B integration to support a real-time economy. For practitioners, this research created several tools and concepts to improve value activities, information logistics integration design and management and orchestration models. Based on the results, the companies were able to better understand the formulation of the digital business ecosystem and the importance of joint efforts in collaboration. However, the challenge of incorporating this new knowledge into strategic processes in a multi-stakeholder environment remains. This challenge has been noted, and new projects have been established in pursuit of a real-time economy.

Integration of biofuel production. How pyrolysis and torrefaction can be integrated

The main goal of this work is to clarify the idea of two thermochemical conversion processes of biomass - pyrolysis and torrefaction and to identify possible ways how and where exactly these processes can be integrated. Integration into CHP power plant process was chosen as one of the most promising ways. Multiple product development was determined by means of this integration concept. The analysis of the possible pros and cons was made based on some experimental data collected from the previous studies related to the topic of my work. In addition, one real integrated case was represented in the last part of the work. Finally, to highlight the main idea brief summarizing was done.

Development of project cash flow forecasting process

Process management refers to improving the key functions of a company. The main functions of the case company - project management, procurement, finance, and human resource - use their own separate systems. The case company is in the process of changing its software. Different functions will use the same system in the future. This software change causes changes in some of the company’s processes. Project cash flow forecasting process is one of the changing processes. Cash flow forecasting ensures the sufficiency of money and prepares for possible changes in the future. This will help to ensure the company’s viability. The purpose of the research is to describe a new project cash flow forecasting process. In addition, the aim is to analyze the impacts of the process change, with regard to the project control department’s workload and resources through the process measurement, and how the impacts take the department’s future operations into account. The research is based on process management. Processes, their descriptions, and the way the process management uses the information, are discussed in the theory part of this research. The theory part is based on literature and articles. Project cash flow and forecasting-related benefits are also discussed. After this, the project cash flow forecasting as-is and to-be processes are described by utilizing information, obtained from the theoretical part, as well as the know-how of the project control department’s personnel. Written descriptions and cross-functional flowcharts are used for descriptions. Process measurement is based on interviews with the personnel – mainly cost controllers and department managers. The process change and the integration of two processes will allow work time for other things, for example, analysis of costs. In addition to the quality of the cash flow information will improve compared to the as-is process. Analyzing the department’s other main processes, department’s roles, and their responsibilities should be checked and redesigned. This way, there will be an opportunity to achieve the best possible efficiency and cost savings.

Organization of the marketing communication activities after fusion - the integration and the decision making processes

This master’s thesis was made in order to gain answers to the question of how the integration of the marketing communications and the decision making related to it in a geographically dispersed service organization could be improved in a situation where an organization has gone through a merger. The effects of the organizational design dimensions towards the integration of the marketing communications and the decision making related to it was the main focus. A case study as a research strategy offered a perfect frames for an exploratory study and the data collection was conducted by semi-structured interviews and observing. The main finding proved that from the chosen design dimensions, decentralization, coordination and power, could be found specific factors that in a geographically dispersed organization are affecting the integration of the marketing communications negatively. The effects can be seen mostly in the decision making processes, roles and in the division of responsibility, which are affecting the other dimensions and by this, the integration. In a post-merger situation, the coordination dimension and especially the information asymmetry and the information flow seem to have a largest affect towards the integration of the marketing communications. An asymmetric information distribution with the lack of business and marketing education resulted in low self-assurance and at the end in fragmented management and to the inability to set targets and make independent decisions. As conclusions it can be stated, that with the organizational design dimensions can the effects of a merger towards the integration process of the marketing communications to be evaluated.

Integration of marketing research data in new product development. Case study: Food industry company

The aim of this master’s thesis is to provide a real life example of how marketing research data is used by different functions in the NPD process. In order to achieve this goal, a case study in a company was implemented where gathering, analysis, distribution and synthesis of marketing research data in NPD were studied. The main research question was formulated as follows: How is marketing research data integrated and used by different company functions in the NPD process? The theory part of the master’s thesis was focused on the discussion of the marketing function role in NPD, use of marketing research particularly in the food industry, as well as issues related to the marketing/R&D interface during the NPD process. The empirical part of the master’s thesis was based on qualitative explanatory case study research. Individual in-depth interviews with company representatives, company documents and online research were used for data collection and analyzed through triangulation method. The empirical findings advocate that the most important marketing data sources at the concept generation stage of NPD are: global trends monitoring, retailing audit and consumers insights. These data sets are crucial for establishing the potential of the product on the market and defining the desired features for the new product to be developed. The findings also suggest the example of successful crossfunctional communication during the NPD process with formal and informal communication patterns. General managerial recommendations are given on the integration in NPD of a strategy, process, continuous improvement, and motivated cross-functional product development teams.

Systematic mapping study on integration of B2B customers in ERP

Business-to-business terminology is relatively new as a business concept, so is the enterprise resource planning system in information technology. Research, implementation and integration of these two concept has been observed for last two decades in this paper. One of the major success point for growth in business-to-business environment is the availability of internal and partner data. Enterprise resource planning system facilitates storing, analysis of such data and enables different business process automation, forecasting and numerous value creating activity. In order to achieve such functionality for B2B customers, integrating them within ERP is very useful. This paper aims at understanding and suggesting such integration through investigating related documentation of similar integration scenarios, infrastructure, models and architectures. The investigation of the topic of this paper has been made using systematic mapping study of related papers and listing and suggesting necessary ingredients that enables such integration. Furthermore, this paper also suggests possibilities to overcome challenges integration experts might face during the integration phase and opens doors to future research scope in the related fields.

Integration of Logistics Systems across Companies’ Borders

The growth of the companies working in the Logistics area has raised the need for using several Logistics systems that can meet the increased requirements in business processes. Different companies may use one or more Logistics systems internally and may use different Logistics systems that other collaborated companies use. Furthermore, these Logistics systems are required to communicate with each other in order to process and manage the flow of the information. Integrating the Logistics systems is beneficial as it allows interaction between the whole systems and services instead of the need to replace them. In addition, it improves the efficiency, lowers the possible errors in the supply chain, reduces the costs and facilitates the access of suppliers and customers to the information. This in turn leads to better relationships with both suppliers and customers. Usually local integration of several Logistics systems is not very difficult, especially that mostly the companies buy their system from a single source. However, the case is different for integrating several logistics systems across the companies’ borders. In this case, there are many factors play major roles in limiting the integration, such as using different systems and different output. This thesis highlights these factors and challenges, demonstrates some solutions for the logistics inter-organizational integration from the perspective of information systems and presents some approaches for integrating these systems. There are many studies about the integration inside a company but fewer studies focused about the technical side and the information systems integration across company’s borders or what is called inter-organizational integration. This study is a literature review that aims at illustrating the challenges, the requirements and some approaches in inter-organizational logistics information systems integration of logistics systems across the companies’ borders.

The problem of national integration in plural societies : a case study of Pakistan, 1947-71 /|nMuhammed A. Quddus. -- 260 St. Catharines [Ont. : s. n.],

Pakistan had a plural society per excellence. Its people were divided geographically between two separate regions, spoke different languages, had different cultures and economic structures. Like other plural societies elsewhere, Pakistan also faced the problem of national integration. Cleavages along the lines of traditional attachments are fundamental to any plural society, as they were in Pakistan. But their political manifestation could have been kept within managable limits if the Central Government, overwhelmingly composed of the West Pakistanis, was seriously committed to the task. All that Pakistan needed to maintain her integrated existence was deliberate, calculated and conscious efforts on the part of the Central Government to give the Bengalis, the majority linguistic and geographic group in the country, a partnership in the state of Pakistan, an effective power in the decision-making process of the country, a reasonable share from the economic resources of the country, and to show respect to their hopes and aspirations. In addition, Pakistan needed a national platform to bring her divergent linguistic and geographic groups toge~her for some common, national purpos~s. Political parties were the only institutions which could have served this purpose. Pakistan miserably failed to sustain national political parties and failed to satisfy Bengalis' demands. This failure eventually resulted in the falling apart of the political system of Pakistan in 1971.

Understanding the Integration of Living Skills Through the Context of Health and Physical Education: A Case Study of Educators’ Experiences

The research presented is a qualitative case study of educators’ experiences in integrating living skills in the context of health and physical education (HPE). In using semi-structured interviews the study investigated HPE educators’ experiences and revealed their insights relative to three major themes; professional practice, challenges and support systems. Professional practice experiences detailed the use of progressive lesson planning, reflective and engaging activities, explicit student centered pedagogy as well as holistic teaching philosophies. Even further, the limited knowledge and awareness of living skills, conflicting teaching philosophies, competitive environments between subject areas and lack of time and accessibility were four major challenges that emerged throughout the data. Major supportive roles for HPE educators in the integration process included other educators, consultants, school administration, public health, parents, community programs and professional organizations. The study provides valuable discussion and suggestions for improvement of pedagogical practices in teaching living skills in the HPE setting.

Resilience and Individualized Community Integration Interventions for Persons with Traumatic Brain Injuries

Investigators, caregivers, administrators and service users in the field of rehabilitation are increasingly interested in the concept of resilience, but the literature has very little to offer on interventions aimed at supporting the resilience of persons and their loved ones. This article describes the Personnalized Accompagnement Community Integration (ICII), which is intended to support the resilience of persons with moderate to severe traumatic brain injuries (TBIs). An ICII implementation is currently underway and is expected to support social participation and stimulate the resilience of persons with TBIs. It is based on four frames of reference: community integration founded on the person’s perception of their community integration, the ecosystemic model, the handicap production process (HPP) model, and the goal-setting process. ICII adopts an intervention perspective centered on the life plan of the person with a TBI.

The role of European Union integration in post-communist democratization in Bulgaria and Macedonia

Cette recherche porte sur la dimension interprétative de l'intégration européenne et sur son rôle dans la démocratisation au sein des pays postcommunistes. Je focalise mon attention sur la signification pour les gens desdits pays que revêtent la participation politique, la compétence politique, et l’action collective. Cette signification prend forme selon des circonstances spécifiques, agencées par les relations de pouvoir asymétriques avec l’Union européenne (UE). J’examine la littérature sur le rôle de l'intégration européenne dans la démocratisation des pays postcommunistes et je distingue deux paradigmes théoriques principaux : un premier qui met l'accent sur le processus institutionnel, l’autre sur le processus instrumental stratégique. Au sein de ces deux approches, je présente différents auteurs qui voient l'UE soit comme un facteur pro-démocratique, soit comme un facteur antidémocratique dans le contexte postcommuniste de transition politique. Cette recherche ne suit pas théoriquement et méthodologiquement les études contenues dans la revue de la littérature. Plutôt, elle s’appuie sur un modèle théorique inspiré des recherches de McFalls sur la réunification culturelle allemande après 1989. Ce modèle, sans négliger les approches institutionnelles et stratégiques, met l’accent sur d'autres écoles théoriques, interprétatives et constructivistes. Mes conclusions se basent sur les résultats de séjours d'étude dans deux pays postcommunistes : la Bulgarie, membre de l'UE depuis 2007, et la Macédoine, pays-candidat. J’ai recours à des méthodes qualitatives et à des techniques ethnographiques qui triangulent des résultats puisés à des sources multiples et variées pour exposer des trajectoires dynamiques de changement culturel influencées par l'intégration européenne. Les conclusions montrent sous quelles conditions les idéaux-types de changement politique conventionnels, soit institutionnel ou stratégique, représentent des modèles utiles. Je présente aussi leurs limitations. Ma conclusion principale est que l'intégration européenne représente un phénomène complexe dans le monde des significations. C’est un facteur qui est simultanément un amplificateur et un inhibiteur de la culture politique démocratique. Les gens créent des sous-cultures différentes où des interprétations multiples du processus d'intégration européenne mènent à des effets dissemblables sur la participation politique, la compétence et l’action collective. La conversation discursive entre les gens qui composent de telles sous-cultures distinctes peut produire des effets divergents au niveau national. Cette recherche n’est pas une analyse de l’UE comme mécanisme institutionnel ; elle ne pose ainsi pas l’UE comme une institution qui détermine directement le processus de démocratisation postcommuniste. Plutôt, elle s’intéresse au processus d’intégration européenne en tant qu’interaction qui affecte la culture politique au sein des pays postcommunistes, et à la manière dont cette dernière peut agir sur le processus de démocratisation. Mon point d’intérêt central n’est donc pas l’européanisation ou le processus de devenir « comme l’Europe », à moins que l’européanisation ne devienne une composante de la culture politique avec des conséquences sur le comportement politique des acteurs.

Role Clarification Processes for Better Integration of Nurse Practitioners into Primary Healthcare Teams: A Multiple-Case Study

Cet article s'intéresse aux processus de clarification des rôles professionnels lors de l'intégration d'une infirmière praticienne spécialisée dans les équipes de première ligne au Québec.

Dieselmotor-Kraft-Wärme-Kopplungsanlagen im Kontext der Integration Erneuerbarer Energien in die Energieversorgung

In dieser Arbeit werden die sich abzeichnenden zukünftigen Möglichkeiten, Stärken und Schwächen der Kraft-Wärme-Kopplung (KWK) untersucht. Dies geschieht vor dem Hintergrund des Klimawandels, der Integration steigender Anteile Erneuerbarer Energien in die Stromerzeugung und unter Berücksichtigung der sich damit ergebenden Herausforderungen, eine sichere und nachhaltige Stromversorgung zu gestalten. Der Fokus liegt auf der Dieselmotor-KWK und der Nutzung nachwachsender Kraftstoffe. Es wird davon ausgegangen, dass der Übergang zu einer reinen Stromerzeugung aus Erneuerbaren Energiequellen in Deutschland unter erheblicher Einbindung des hohen Potentials der kostengünstigen, umweltfreundlichen, aber in der Leistung extrem fluktuierenden Windenergie erfolgen wird. Als dezentrales Integrationswerkzeug wurde die Kraft-Wärme-Kopplung mit Dieselmotoren untersucht. Sie entspricht aufgrund ihrer großen Flexibilität und ihrer hohen Wirkungsgrade mit vergleichsweise kleinen Leistungen sehr gut den Anforderungen der gleichzeitigen dezentralen Wärmenutzung. In der Dissertation werden die Randbedingungen der Dieselmotor-KWK untersucht und beschrieben. Darauf aufbauend werden unterschiedliche Modelle der Windintegration durch KWK erarbeitet und in diversen Variationen wird der Ausgleich der Stromerzeugung aus Windenergie durch KWK simuliert. Darüber hinaus werden dezentrale KWK-Anlagen hinsichtlich eines koordinierten gemeinsamen Betriebs und hinsichtlich der optimalen Auslegung für den Windenergieausgleich betrachtet. Es wird für den beschriebenen Kontext der Erneuerbaren Energien und der Kraft-Wärme-Kopplung das Thema „Umweltwirkungen“ diskutiert. Es wird dargelegt, dass die heute verwendeten Ansätze zur Bewertung der KWK zu einer Verzerrung der Ergebnisse führen. Demgegenüber wurde mit der so genannten Outputmethode eine Methode der Ökobilanzierung vorgestellt, die, im Gegensatz zu den anderen Methoden, keine verzerrenden Annahmen in die Wirkungsabschätzung aufnimmt und somit eine eindeutige und rein wissenschaftliche Auswertung bleibt. Hiermit ist die Grundlage für die Bewertung der unterschiedlichen Technologien und Szenarien sowie für die Einordnung der KWK in den Kontext der Energieerzeugung gegeben. Mit der Outputmethode wird u.a. rechnerisch bewiesen, dass die gekoppelte Strom- und Wärmeerzeugung in KWK-Anlagen tatsächlich die optimale Nutzung der regenerativen Kraftstoffe „Biogas“ und „Pflanzenöl“ im Hinblick auf Ressourceneinsatz, Treibhausgaseinsparung und Exergieerzeugung ist. Es wurde darüber hinaus die Frage untersucht woher die für die Stromerzeugung durch Dieselmotor-KWK-Anlagen notwendige Bioenergie genommen werden kann. Es ist erwiesen, dass die in Deutschland nutzbare landwirtschaftliche Fläche nur zur Deckung eines Teils der Stromerzeugung ausreichen würde. Einheimisches Biogas und nachhaltiges importiertes Pflanzenöl, das in hohem Maße auf degradierten Böden angebaut werden sollte, können die notwendige Brennstoffenergie liefern. Um im Ausland ausreichend Pflanzenöl herstellen zu können, wird eine landwirtschaftliche Fläche von 6 bis 12 Mio. ha benötigt. Das Ergebnis ist, dass ein voller Ausgleich von Windenergie-Restlast durch KWK mit Erneuerbaren Energieträgern sinnvoll und machbar ist! Dieses Wind-KWK-DSM-System sollte durch ein Stromnetz ergänzt sein, das Wasserkraftstrom für den Großteil der Regelenergieaufgaben nutzt, und das den großräumigen Ausgleich Erneuerbarer Energien in Europa und den Nachbarregionen ermöglicht.

How do domestic policies affect the integration of Ethiopian fertiliser markets with world markets?

Frequent shifts in policy on fertiliser markets have occurred in Ethiopia with the aim of facilitating both physical and economic access of farmers to fertiliser. The last shift was the introduction of a monopoly on each stage of the supply chain in 2008. Furthermore, government control of prices and margins as well as stockholding programmes are also present on the markets. This paper evaluates the effect of these policies on the integration of domestic with world markets of fertiliser, using cointegration methods. Time series data of diammonium phosphate (DAP) and urea prices on world, import and retail markets between 1971 and 2012 are used. The findings show high transmission of price signals from world markets to import prices for both DAP and urea. However, between import and retail prices there is no evidence of cointegration for urea, while for DAP full price transmission is concluded. In the retail market, domestic transaction costs associated with storing large volumes of fertiliser act as a buffer between import and retail prices, especially for urea. Therefore, economic benefits could be achieved by reducing the size of stocks and revising the demand estimation process.