Disertación química y análisis de las aguas minerales de Naval-pino : año de 1819 /

Mode of access: Internet.

Disertación sobre las aguas minerales en general,y particularment de las de Naval-Pino : Madrid 18 de agosto de 1819 /

Mode of access: Internet.

Tablas de reduccion, que comprehenden quantas comparaciones puedan hacerse entre el pie, y vara de Castilla, y pie de Rey, y toisa de Parìs en longitud quadrado, y cubico : las del peso especifico de los pies cubicos de Castilla de agua dulce, madera de pino ... : las de la diferencia del aparente al verdadero nivèl en medida de Castilla, y de Parìs ... /

Mode of access: Internet.

Memory lineage of Ansúrez: the funerary monument in Gordaliza del Pino (León).

The discovery of the mural on the walls of the church of Santa Maria de Arbas of the town of Leon Gordaliza del Pino has been a revelation. The funerary monument called Knight Gordali-za addition to its artistic value , has a historical value that try to reflect in this study and that clears some questions about the his-tory of the kingdom of Leon, and specifically about the lineage of Ansúrez.

Dimensionamento de um pavilhão metálico para armazenamento de paletes de madeira

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Estruturas

Síntese e caracterização de biodiesel metílico e etílico a partir de blendas dos óleos de tungue e de soja

No presente trabalho foi investigada a transesterificação de blendas dos óleos de soja e de tungue com metanol ou etanol empregando catalisador alcalino (NaOH ou KOH). Foi investigado o tempo reacional, a proporção da blenda, a concentração e o tipo de catalisador, tipo de álcool e razão molar, temperatura e metodologia empregada no tratamento da reação. Nas reações com metanol obtiveram-se melhores conversões com tempo reacional de 1,5h; temperatura de 60°C; proporção blenda dos óleos de soja e de tungue de 90:10 (m/m); concentração de NaOH de 0,5% em relação a massa da blenda e razão molar metanol:blenda de 6:1. O tratamento dos ésteres metílicos produzidos na reação foi realizado por lavagem com água a 60°C após o processo de decantação das fases, metodologia C. O rendimento de ésteres metílicos foi superior a 96% e, o teor de mono-, di- e triacilglicerídeos, glicerol livre e total ficou abaixo dos limites estabelecidos pela ANP, indicando boa conversão (> 96,5%). Nas reações com etanol verificou-se que as melhores condições reacionais foram com uma concentração de catalisador de 0,8% de NaOH em relação a massa da blenda, razão molar etanol:blenda de 9:1, tempo de 1,5h e temperatura de 60°C. O tratamento dos produtos da reação foi realizado por lavagem com água a 60°C após o processo de remoção do etanol e decantação das fases, metodologia D. A concentração do catalisador foi um fator determinante na separação das fases. Uma maior concentração de catalisador favorece a saponificação, dificultando a separação das fases e afetando o rendimento do biodiesel sintetizado, tanto para o metílico quanto o etílico. O índice de acidez, tanto para o biodiesel metílico como o etílico, para qualquer proporção da blenda dos óleos de soja e tungue, ficaram dentro das normas da ANP, com valores abaixo de 0,5 mg.g-1 de KOH.

Estudo da hidrogenação para pulverização de ligas à base de terras raras com Nb para eletrodos de hidreto metálico

Tese (Doutorado em Tecnologia Nuclear)

Construcción de mapas de combustible forestal para detectar el peligro de incendio en un bosque de pino-encino

Como herramienta para la identificación de áreas con peligro de incendio se pueden generar mapas a partir de variables que influyen en el comportamiento de estos fenómenos. Los combustibles forestales tienen una influencia directa en el desarrollo y establecimiento de los incendios y son el único componente que puede ser modificado por el hombre. Considerando esto, el presente trabajo se enfocó en la generación de un mapa basado en inventarios de combustibles forestales. La realización de estos inventarios se llevó a cabo mediante la técnica conocida como intersecciones planeares, la información recaudada en campo se aplicó el método Kriging para generar un mapa con la carga de combustible total. Los resultados para el inventario de combustibles se estimaron en un promedio de 37.57 Mg/ha-1. El mapa generado permite identificar áreas con mayor peligro de incendio dentro del área de estudio. La generación de este tipo de información ayuda a la toma de decisiones para la prevención y combate de incendios forestales.

Desfile de llegada de la Estudiantina Pedro Morales Pino

Desfile de llegada de la Estudiantina Pedro Morales Pino. Cartago, C.1940.

Estudo da sinterabilidade de ligas de níquel obtidas por meio dos portadores de liga sic, si3n4 ou si metálico com grafita

Nickel alloys are frequently used in applications that require resistance at high temperatures associated with resistance to corrosion. Alloys of Ni-Si-C can be obtained by means of powder metallurgy in which powder mixtures are made of metallic nickel powders with additions of various alloying carriers for such were used in this study SiC, Si3N4 or Si metal with graphite. Carbonyl Ni powder with mean particle size of 11 mM were mixed with 3 wt% of SiC powders with an average particle size of 15, 30 and 50 μm and further samples were obtained containing 4 to 5% by mass of SiC with average particle size of 15 μm. Samples were also obtained by varying the carrier alloy, these being Si3N4 powder with graphite, with average particle size of 1.5 and 5 μm, respectively. As a metallic Si graphite with average particle size of 12.5 and 5 μm, respectively. The reference material used was nickel carbonyl sintered without adding carriers. Microstructural characterization of the alloys was made by optical microscopy and scanning electron microscopy with semi-quantitative chemical analysis. We determined the densities of the samples and measurement of microhardness. We studied the dissociation of carriers alloy after sintering at 1200 ° C for 60 minutes. Was evaluated also in the same sintering conditions, the influence of the variation of average particle size of the SiC carrier to the proportion of 3% by mass. Finally, we studied the influence of variation of the temperatures of sintering at 950, 1080 and 1200 ° C without landing and also with heights of 30, 60, 120 and 240 minutes for sintering where the temperature was 950 °C. Dilatometry curves showed that the SiC sintered Ni favors more effectively than other carriers alloy analyzed. SiC with average particle size of 15 μm active sintering the alloy more effectively than other SiC used. However, with the chemical and morphological analyzes for all leagues, it was observed that there was dissociation of SiC and Si3N4, as well as diffusion of Si in Ni matrix and carbon cluster and dispersed in the matrix, which also occurred for the alloys with Si carriers and metallic graphite. So the league that was presented better results containing Si Ni with graphite metallic alloy as carriers, since this had dispersed graphite best in the league, reaching the microstructural model proposed, which is necessary for material characteristic of solid lubricant, so how we got the best results when the density and hardness of the alloy

Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico

Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5

Obtenção de pós de tântalo metálico a partir da redução aluminotérmica com ignição a plasma

Metallic tantalum has a high commercial value due to intrinsic properties like excellent ductility, corrosion resistance, high melt and boiling points and good electrical and thermal conductivities. Nowadays, it is mostly used in the manufacture of capacitors, due to excellent dielectric properties of its oxides. In the nature, tantalum occurs in the form of oxide and it is extracted mainly from tantalite-columbite ores. The tantalum is usually produced by the reduction of its oxide, using reductants like carbon, silicon, calcium, magnesium and aluminum. Among these techniques, the aluminothermic reduction has been used as the industrial method to produce niobium, tantalum and their alloys, due to the easy removal of the Al and Al2O3 of the system, easing further refining. In conventional aluminothermic reduction an electrical resistance is used to trigger the reaction. This reaction self-propagates for all the volume of material. In this work, we have developed a novel technique of aluminothermic reduction that uses the hydrogen plasma to trigger the reaction. The results obtained by XRD, SEM and EDS show that is possible to obtain a compound rich in tantalum through this technique of aluminothermic reduction in the plasma reactor

Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test