Propagation of the Madden–Julian Oscillation and scale interaction with the diurnal cycle in a high-resolution GCM

The Madden–Julian Oscillation (MJO) is the chief source of tropical intra-seasonal variability, but is simulated poorly by most state-of-the-art GCMs. Common errors include a lack of eastward propagation at the correct frequency and zonal extent, and too small a ratio of eastward- to westward-propagating variability. Here it is shown that HiGEM, a high-resolution GCM, simulates a very realistic MJO with approximately the correct spatial and temporal scale. Many MJO studies in GCMs are limited to diagnostics which average over a latitude band around the equator, allowing an analysis of the MJO’s structure in time and longitude only. In this study a wider range of diagnostics is applied. It is argued that such an approach is necessary for a comprehensive analysis of a model’s MJO. The standard analysis of Wheeler and Hendon (Mon Wea Rev 132(8):1917–1932, 2004; WH04) is applied to produce composites, which show a realistic spatial structure in the MJO envelopes but for the timing of the peak precipitation in the inter-tropical convergence zone, which bifurcates the MJO signal. Further diagnostics are developed to analyse the MJO’s episodic nature and the “MJO inertia” (the tendency to remain in the same WH04 phase from one day to the next). HiGEM favours phases 2, 3, 6 and 7; has too much MJO inertia; and dies out too frequently in phase 3. Recent research has shown that a key feature of the MJO is its interaction with the diurnal cycle over the Maritime Continent. This interaction is present in HiGEM but is unrealistically weak.

What is outside? The early years foundation stage in England: outdoor facilities, organisation and staff attitudes

The purpose of this paper is to report on the facilities available, organisation of, and staff attitudes to early years outdoor education from schools within the south east of England, focusing on provision for children aged three to five. One component of the successful education of the child involves providing an ‘environment for learning’, including the facilities, layout and routines. This paper presents findings concerning the type and variety of facilities available outside; the various styles of organisation of the space; staff attitudes about: their roles, their aims for the environment, children’s behaviour and learning, and perceived drawbacks to practice. This paper draws on empirical data collected from schools within the University of Reading partnership. The findings suggest that although all early years settings must adhere to the statutory framework there are a range of facilities available, and there are a number of ways this environment is organised. Further there appears to be uncertainty about the adult role outside and the aims for activities. The conclusions drawn indicate that staff do not appear to be linking their aims for outdoor education to the facilities provided or to their actions outside. This means there is not a clear link between what staff provide outside and the declared ambitions for learning. This study is important as all educators need to be certain about their aims for education to ensure best outcomes for children. The implications of these findings for early years teachers are that they need to be able to articulate their aims for outdoor education and to provide the correct facilities to achieve these aims. Finally this study was undertaken to raise debate, posit questions and to ascertain the parameters for further research about the early years outdoor environment.

Supramolecular materials for inkjet printing: self-assembling polymer networks

Electronically complementary, low molecular weight polymers that self-assemble through tuneable π-π stacking interactions to form extended supramolecular polymer networks have been developed for inkjet printing applications and successfully deposited using three different printing techniques. Sequential overprinting of the complementary components results in supramolecular network formation through complexation of π-electron rich pyrenyl or perylenyl chain-ends in one component with π-electron deficient naphthalene diimide residues in a chain-folding polyimide. The complementary π-π stacked polymer blends generate strongly coloured materials as a result of charge-transfer absorptions in the visible spectrum, potentially negating the need for pigments or dyes in the ink formulation. Indeed, the final colour of the deposited material can be tailored by changing varying the end-groups of the π electron rich polymer component. Piezoelectric printing techniques were employed in a proof of concept study to allow characterisation of the materials deposited, and a thermal inkjet printer adapted with imaging software enabled a detailed analysis of the ink-drops as they formed, and of their physical properties. Finally, continuous inkjet printing allowed greater volumes of material to be deposited, on a variety of different substrate surfaces, and demonstrated the utility and versatility of this novel type of ink for industrial applications.

Sociologin, hybriderna och den sociala verkligheten : exemplet kärnavfall

Sociology, hybrids and social reality: the case of nuclear waste The continuing technological transformation of nature means that sociology’s traditional vision of a sharp divide between nature and society is becoming ever harder to defend. Starting from Bruno Latour’s critique of modernity, and Nikolas Rose’s explorations of political power beyond the state, this article presents a framework for analysing the expanding wealth of hybrids of nature and society surrounding us today, and the problems of government they pose. These hybrids confront us with the need to rethink sociology’s conception of ‘the social’. With Latour’s help, the interplay of nature and society can be understood as subject to technical mediation, opening the way for studies of the varying arrangements through which different configurations of nature and society are produced. Rather than alternative social constructions of nature, what sociologists should be at pains to analyse and question are different programmes and strategies for bringing together natural and social forces in durable combinations. In the article, the geological disposal of nuclear waste serves as a useful example for exploring the fruitfulness of the analytical framework put forward. This complex undertaking constitutes just one component in a larger field of technoscientific endeavour that has irrevocably transformed nature while simultaneously re-making society. Addressing this case, we seek to reveal the promise of a sociology that does not bound ‘the social’ in advance, but rather makes the co-production of technology and society one of its most important objects of study.

Rotinas para a otimizacao experimental de misturas

No cenário atual, onde a globalização, aliada a um maior nível de exigência por parte do cliente, impõem às empresas um maior empenho por competitividade, a agdidade no desenvolvimento e otimização de produtos torna-se crucial para a sobrevivência das mesmas no mercado. Neste contexto, procurou-se compilar várias técnicas utilizadas em E n g e h dd Qd& em um método integrado para a Ot+o Expmmid de MWtwa. Essas técnicas fornecem resultados muito mais rápidos e econômicos do que a tradicional prática de variar um componente de cada vez na mistura, devido ao menor número de ensaios necessários. Entretanto, apesar de não serem tão recentes, as ferramentas aplicáveis à otimização de misturas não têm sido utilizadas pelo seu maior beneficiário (a indústria), provavelmente por falta de divulgação de sua existência, ou, principalmente, devido à complexidade dos cálculos envolvidos. Dessa forma, além do método proposto, desenvolveu-se também um sofiwa~q ue irnplementa todas os passos sugeridos, com o intuito de facilitar ainda mais a aplicação dos mesmos por pessoas não especializadas em técnicas estatísticas. Através do software (OptiMix), o método foi testado em uma situação real e em um estudo comparativo com um relato da literatura, a fim de testar sua validade, necessidade de adaptações e consistência dos resultados. A avaliaçio dos estudos de caso demonstrou que o método proposto fornece resultados coerentes com os de outras técnicas alternativas, com a vantagem de o usuário não precisar realizar cálculos, evitando assim, erros e agilizando o processo de otimização.

Permanência de alunos nos cursos presenciais e a distância em Administração: contribuições para a gestão acadêmica

A educação a distância vem ganhando destaque nos últimos anos em função da capacidade de expansão do ensino superior e também por incluir um grupo de pessoas que, de outra forma, não poderia realizar uma graduação. O objetivo dessa pesquisa é identificar as variáveis que influenciam o processo de permanência dos alunos de Administração, comparando resultados das modalidades presencial e a distância, tomando como caso a Universidade Estadual do Maranhão (Uema). Como principal referencial teórico do presente estudo, escolheu-se o Modelo de Integração do Estudante de Tinto (1975), considerado como a primeira proposta academicamente reconhecida de determinação das variáveis que intervém no processo de evasão e permanência de alunos em um curso de graduação. Um dos componentes do modelo despertou o interesse de comparação entre as duas modalidades (presencial e a distância) de forma especial, qual seja: a integração social, decorrente das interações discentes e docentes, que em geral são pouco exploradas nos estudos empíricos. O método definido para o estudo foi de caráter descritivo e base qualitativa. A submissão do conjunto de variáveis observadas na literatura a uma análise de juízes resultou na definição de três principais Dimensões e 60 Componentes, a saber: (1) Perfil do aluno; (2) Estar-em-rede; e (3) Condições para a permanência. Essas variáveis compuseram o quadro de análise de conteúdo categorial, resultante da aplicação de múltiplos instrumentos de coleta de dados (dois questionários e uma entrevista em profundidade), que foram utilizados na triangulação com dados secundários obtidos no próprio Enade (2009). Como contribuição teórica da presente tese, aponta-se a possibilidade de integração das três visões filosóficas: Cognitivismo, Construtivismo e Conectivismo que se interrelacionam na gestão acadêmica de cursos superiores pela unicidade da educação vislumbrada pelo blended learning como tendência futura para a educação superior. Outras contribuições são apresentadas em relação aos componentes: atributos individuais, trabalho e estágio, contexto familiar, escolaridade anterior, uso das TICs, interação docente e discente, compromisso pessoal e institucional e integração acadêmica.

Susceptibility of mosquito vectors to Dirofilaria immitis on Madeira Island, Portugal

Dirofilaria immitis (Leidy, 1856), an agent of heartworm disease, is an important parasite from both the veterinary standpoint and as a model to study human filariasis. It is a mosquito-borne filarial nematode which inhabits the right ventricle and pulmonary arteries of dogs. D. immitis is an important disease agent on Madeira Island with about 30% of dogs testing positive for this worm. Nevertheless, the vectors of this parasite in Madeira have never been studied, nor has the interaction between pathogen and vector, or the environmental variables that might influence heartworm transmission. Innate susceptibility to infection is only one component of vector competence, and field isolation of naturally infected mosquitoes has shown the capability of D. immitis to exploit a great diversity of vector species under natural conditions. The purpose of this work was to determine which mosquitoes are vectors of heartworm disease, the relation between population density and environment, and the association between immune response of the vector to the filarial parasite. Seasonal abundance of Culex theileri and Culex pipiens molestus was studied. Correlation and canonical correspondence analysis were performed using abundance data of these two species with selected weather variables, including mean temperature, relative humidity and accumulated precipitation. The most important factor determining Cx. theileri abundance was accumulated precipitation, while Cx. pipiens molestus abundance did not have any relationship with weather variables. Field studies were performed to verify whether Cx. theileri Theobald functions as a natural vector of D. immitis on Madeira Island, Portugal. Cx. theileri tested positive for D. immitis for the first time. The same study was made regarding Cx. p. molestus. Two abnormal L2 stage filarial worms were found in Malpighian tubules in field caught Cx. p. molestus. In the laboratory, two strains of Cx. p. molestus were studied for their susceptibility to D. immitis. None presented infective-stage larvae. Finally, because Cx. p. molestus is an autogenous mosquito, we evaluated the reproductive costs when this mosquito mounts an immune response against D. immitis in the absence of a blood meal. This mosquito showed an active immune response when inoculated intrathoracically with microfilariae (mf) of the heartworm. The ovaries from mosquitoes undergoing melanotic encapsulation developed more eggs than those which could not melanize the mf. This fact is contradictory with some previous studies of reproductive costs in Armigeres subalbatus and Ochlerotatus trivittatus, and it was the first time that an autogenous mosquito was used to study this subject.

Purificação da glicerina bruta obtida a partir da transesterificação do óleo de algodão

The crude glycerine is a raw material that can be used in a wide variety of products. Even with all the impurities inherent in the process of being obtained, the crude glycerin is already in a marketable product. However, the market is much more favorable to the commercialization of purified glycerine. The glycerin is a byproduct gotten from the process of transesterification of waste oils and fats in the production of biodiesel. More recently, the deployment of the new Federal Law of Brazil, related to the implementation of energy resources, forces, from 2008, the increase of 2% biodiesel in diesel common with prospects for 5% (B5). Therefore, it is indispensable that new routes of purification as well as new markets are developed. The objective of this work was to purify, through ion exchange, the crude glycerin, obtained from the reaction of transesterification of cottonseed oil. The cottonseed oil was characterized as the fatty acid composition and physical-chemical properties. The process of ion exchange was conducted in batch. In this process were used strong cation, low anion resins and a mixed resin used to de-ionize water. The purified glycerin was characterized as the content of metals. Tests were performed with activated charcoal adsorption, and for this, it was made tests of time contact with coal as well as quantity of coal used. The time of activation, the amount of the activation solution, the contact time of the glycerol solution in resins, the amount and type of resin applied were evaluated. Considering the analysis made with activated charcoal, when the glycerin solution was treated using the resins individually it was observed that in the conditions for treatment with 10 g of resin, 5 hours of contact with each resin and 50 mL of glycerin solution, its conductivity decreased to a cationic resin, increased to the anionic resin and had a variable value with respect to resin mixed. In the treatment in series, there was a constant decrease in the conductivity of the solution of glycerin. Considering two types of treatment, in series and individually, the content of glycerol in glycerin pre-purified solution with the different resins varied from 12,46 to 29.51% (diluted solution). In analysis performed without the use of activated charcoal, the behavior of the conductivity of the solution of glycerin were similar to results for treatment with activated charcoal, both in series as individually. The solution of glycerin pre-purified had a glycerol content varying from 8.3 to 25.7% (diluted solution). In relation to pH, it had a behavior in accordance with the expected: acid for the glycerin solution treated with cationic resin, basic when the glycerin solution was treated with the anionic resin and neutral when treated with the mixed resin, independent of the kind of procedure used (with or without coal, resins individually or in series). In relation to the color of the glycerin pre-purified solution, the resin that showed the best result was the anionic (colorless), however this does not mean that the solution is more in pure glycerol. The chromatographic analysis of the solutions obtained after the passage through the resins indicated that the treatment was effective by the presence of only one component (glycerol), not considering the solvent of the analysis

Sistemas microemulsionados aplicados à remoção da cor de efluente têxtil

Effluent color resulting from textile dyeing processes has been one of the biggest environmental problems faced by the textile industry. In particular, reactive dyes are highly resistant to conventional wastewater treatment methods. New technologies have been contemplated, some of which have been applied in industrial treatment plants, but color removal has not been efficiently attained. Since microemulsion systems provide good results in heavy metals and proteins extraction processes, their use in dyes extraction has been suggested and investigated. In this work, a real textile wastewater from an exhaustion dyebath has been treated, which contains the following reactive dyes: Procion Yellow H-E4R (CI Reactive Yellow 84), Procion Blue H-ERD (CI Reactive Blue 160) and Procion Red H-E3B (CI Reactive Red 120), in addition to auxiliary compounds normally found in dyeing processes with reactive dyes. The dyes Remazol Blue RR and Remazol Turquoise Blue G (Reactive Blue 21) have also been examined in view of the presence of heavy metals in these molecules. The microemulsion system comprised dodecyl ammonium chloride (as a cationic surfactant), water or wastewater as aqueous phase, kerosene as oil phase, and one of the following alcohols as cosurfactant: isoamyl alcohol, n-butyl alcohol and n-octyl alcohol. The pseudo-ternary diagrams were constructed in order to define Winsor s equilibrium regions. The influence of parameters such as pH, C/S (cosurfactant/surfactant) ratio, distribution coefficient, initial dye concentration, salinity, temperature, phases relative amounts, loading capacity of the microemulsion phase and dye reextraction rate has also been investigated. An experimental planning (Scheffé Net) was used to optimize the extraction process. The removal of color and metals reached levels as high as 99%

Efeitos da cafeína sobre a memória de saguis (Callithrix jacchus)

Caffeine is considered the most consumed psychostimulant in the world, presenting several central and peripheral effects. In the Central Nervous System the major effect occur by its antagonistic activity at the A1 and A2a subtypes of the adenosine receptors. These receptors are responsible for the slow-wave sleep induction, and their binding, caused by the consumption of foods and beverages that contain caffeine, cause behaviors like increase of alertness, mood and locomotion. The effects of caffeine on memory are still discussed because of the diversity of experimental protocols. Also, it does not have the same effects on all stages of the processing of memory - acquisition, consolidation and recall. Thus, using the marmoset (Callitrhix jacchus) as subject, we aim to evaluate the effects of caffeine on the memory of this primate through the conditioned place preference paradigm, where the animal selects a context by presence of food. This cognitive task consists of five phases. The first phase was two sessions of pre-exposure, in which they were evaluated for preference for any compartment of the apparatus. Then, we proceeded the training, conditioning the animals to the food-present context for 8 days. Then, there was administration of caffeine or placebo (10mg/kg) for 8 consecutive days, during the pre-sleep phase, where the 20 animals were distributed in two groups: placebo and repeated. The forth phase was one day of retraining, a re-exposure of the apparatus to the marmosets followed by the administration of caffeine (for the repeated group and a new group called abstinence) or placebo (for placebo and abstinence groups). Finally, was the test where we evaluated if the subjects learned where the food was present. Moreover, in this work we evaluate the existence of differences between females and males on the task, and the locomotor activity for the experimental groups. The results showed that in the pre-exposure phase the animals were habituated on the apparatus and did not present differences for any contexts. In training, they were able to learn the conditioning task, independent of gender. For the retraining, the two groups exhibited more interactions in rewarded context than that in non-rewarded context. Nevertheless, in the locomotor activity, the repeated group moved similarly in contact with the apparatus and outside of it. In the other hand, the animals of the placebo group moved more when in contact with the apparatus. In the test phase, the marmosets under influence of caffeine presented an increase in the locomotor activity when compared with the placebo group, corroborating works that show this increase in locomotion. In the learning evaluation, the continuous and abstinence groups had a bad performance in the task in relation to the placebo and acute groups. This suggests that the prolonged administration of caffeine disrupts the memories because it affected sleep, which is largely responsible offline processing of memories

Dynamical evolution of Saturn's F ring dust particles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Complementarity of eastern and western hemisphere long-baseline neutrino oscillation experiments

We present a general formalism for extracting information on the fundamental parameters associated with neutrino masses and mixings from two or more long baseline neutrino oscillation experiments. This formalism is then applied to the current most likely experiments using neutrino beams from the Japan Hadron Facility (JHF) and Fermilab's NuMI beamline. Different combinations of muon neutrino or muon anti-neutrino running are considered. The type of neutrino mass hierarchy is extracted using the effects of matter on neutrino propogation. Contrary to naive expectation, we find that both beams using neutrinos is more suitable for determining the hierarchy provided that the neutrino energy divided by baseline (E/L) for NuMI is smaller than or equal to that of JHF, whereas to determine the small mixing angle, theta(13), and the CP or T violating phase delta, one neutrino and the other anti-neutrino are most suitable. We make extensive use of bi-probability diagrams for both understanding and extracting the physics involved in such comparisons.

Rho-nucleon tensor coupling and charge-exchange resonances

The Gamow-Teller resonance in Pb-208 is discussed in the context of a self-consistent RPA, based on the relativistic mean field theory. We inquire on the possibility of substituting the phenomenological Landau-Migdal force by a microscopic nucleon-nucleon interaction, generated from the rho-nucleon tensor coupling. The effect of this coupling turns out to be very small when the short range correlations are not taken into account, but too large when these correlations are simulated by the simple extraction of the contact terms from the resulting nucleon-nucleon interaction. (C) 2000 Elsevier B.V. B.V. All rights reserved.

Symbiotic gap and semigap solitons in Bose-Einstein condensates

Using the variational approximation and numerical simulations, we study one-dimensional gap solitons in a binary Bose-Einstein condensate trapped in an optical-lattice potential. We consider the case of interspecies repulsion, while the intraspecies interaction may be either repulsive or attractive. Several types of gap solitons are found: symmetric or asymmetric; unsplit or split, if centers of the components coincide or separate; intragap (with both chemical potentials falling into a single band gap) or intergap, otherwise. In the case of the intraspecies attraction, a smooth transition takes place between solitons in the semi-infinite gap, those in the first finite band gap, and semigap solitons (with one component in a band gap and the other in the semi-infinite gap).

Simultaneous observation of the magnetic and electric behavior in a correlated system near a metal-semiconductor transition: ESR in pellets of conducting polymers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)