Effect of the structure of commercial poly(ethylene oxide-b-propylene oxide) demulsifier bases on the demulsification of water-in-crude oil emulsions: elucidation of the demulsification mechanism

Water-in-crude oil emulsions are formed during petroleum production and asphaltenes play an important role in their stabilization. Demulsifiers are added to destabilize such emulsions,however the demulsification mechanism is not completely known. In this paper, the performances of commercial poly(ethylene oxide-b-propylene oxide) demulsifiers were studied using synthetic water-in-oil emulsions and model-systems (asphaltenes in organic solvent). No change in the asphaltene aggregate size induced by the demulsifier was observed. The demulsification performance decreased as the asphaltene aggregate size increased, so it can be suggested that the demulsification mechanism is correlated to the voids between the aggregates adsorbed on the water droplets surface.

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.

KNOWLEDGE ON ADJUVANT PROPERTIES, DISPOSAL OF PESTICIDERESIDUES AND SPRAY DRIFT OCCURRENCE IN THE STATE OF MATO GROSSO

ABSTRACT This paper aimed at investigating the knowledge level of people working on pesticide spraying activities concerning spray adjuvant properties, as well as collecting information on disposal locations for residues from internal spray tank cleaning, and finally the understanding of pesticide spray drift occurrence in the state of Mato Grosso, Brazil. The information was gathered through a questionnaire answered by participants of a rural extension program in application technology located in nineteen grain and fiber producing regions of Mato Grosso state. Among the mentioned adjuvants, 49.0% belonged to the mineral oil class and 17.9% of participants did not know the functions performed by such products. In addition, 58.5% of the participants discarded residues into the field. Among the participants who answered the question about spray drift occurrence causes, 54.1% indicated problems relating to inadequate weather conditions. In conclusion, there is a lack of knowledge on adjuvant functions, besides of inappropriate residue disposal in the state of Mato Grosso. Spray drift was referred as a problem; however, most of participants were not able to discuss the causes of these losses.

Isolation and characterization of equine peripheral blood-derived multipotent mesenchymal stromal cells

The objective of the study was to isolate, cultivate and characterize equine peripheral blood-derived multipotent mesenchymal stromal cells (PbMSCs). Peripheral blood was collected, followed by the isolation of mononuclear cells using density gradient reagents, and the cultivation of adherent cells. Monoclonal mouse anti-horse CD13, mouse anti-horse CD44, and mouse anti-rat CD90 antibodies were used for the immunophenotypic characterization of the surface of the PbMSCs. These cells were also cultured in specific media for adipogenic and chondrogenic differentiation. There was no expression of the CD13 marker, but CD44 and CD90 were expressed in all of the passages tested. After 14 days of cell differentiation into adipocytes, lipid droplets were observed upon Oil Red O (ORO) staining. Twenty-one days after chondrogenic differentiation, the cells were stained with Alcian Blue. Although the technique for the isolation of these cells requires improvement, the present study demonstrates the partial characterization of PbMSCs, classifying them as a promising type of progenitor cells for use in equine cell therapy.

Greenhouse gas emissions from peat and biomass-derived fuels, electricity and heat — Estimation of various production chains by using LCA methodology

More discussion is required on how and which types of biomass should be used to achieve a significant reduction in the carbon load released into the atmosphere in the short term. The energy sector is one of the largest greenhouse gas (GHG) emitters and thus its role in climate change mitigation is important. Replacing fossil fuels with biomass has been a simple way to reduce carbon emissions because the carbon bonded to biomass is considered as carbon neutral. With this in mind, this thesis has the following objectives: (1) to study the significance of the different GHG emission sources related to energy production from peat and biomass, (2) to explore opportunities to develop more climate friendly biomass energy options and (3) to discuss the importance of biogenic emissions of biomass systems. The discussion on biogenic carbon and other GHG emissions comprises four case studies of which two consider peat utilization, one forest biomass and one cultivated biomasses. Various different biomass types (peat, pine logs and forest residues, palm oil, rapeseed oil and jatropha oil) are used as examples to demonstrate the importance of biogenic carbon to life cycle GHG emissions. The biogenic carbon emissions of biomass are defined as the difference in the carbon stock between the utilization and the non-utilization scenarios of biomass. Forestry-drained peatlands were studied by using the high emission values of the peatland types in question to discuss the emission reduction potential of the peatlands. The results are presented in terms of global warming potential (GWP) values. Based on the results, the climate impact of the peat production can be reduced by selecting high-emission-level peatlands for peat production. The comparison of the two different types of forest biomass in integrated ethanol production in pulp mill shows that the type of forest biomass impacts the biogenic carbon emissions of biofuel production. The assessment of cultivated biomasses demonstrates that several selections made in the production chain significantly affect the GHG emissions of biofuels. The emissions caused by biofuel can exceed the emissions from fossil-based fuels in the short term if biomass is in part consumed in the process itself and does not end up in the final product. Including biogenic carbon and other land use carbon emissions into the carbon footprint calculations of biofuel reveals the importance of the time frame and of the efficiency of biomass carbon content utilization. As regards the climate impact of biomass energy use, the net impact on carbon stocks (in organic matter of soils and biomass), compared to the impact of the replaced energy source, is the key issue. Promoting renewable biomass regardless of biogenic GHG emissions can increase GHG emissions in the short term and also possibly in the long term.

Influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures

The objective of the present study was to analyze the influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures. The experimental plots were arranged in a pasture area in the district of Porto Esperidião (Mato Grosso, Brazil). In all of the treatments, the applications contained the herbicides aminopyralid and fluroxypyr (Dominum) at the dose of 2.5 L c.p. ha-1, including the adjuvant mineral oil (Joint Oil) at the dose of 1.0 L and a tracer to determine the deposition by high-performance liquid chromatography (HPLC) (rhodamine at a concentration of 0.6%). The experiment consisted of nine treatments that comprised the combinations of three spray volumes (20, 30 and 50 L ha-1) and three flight heights (10, 30 and 40 m). The results showed that, on average, there was a tendency for larger deposits for the smallest flight heights, with a significant difference between the heights of 10 and 40 m. There was no significant difference among the deposits obtained with the different spray mixture volumes.

Improving diquat efficacy on grasses by adding adjuvants to the spray solution before use

The effect of five adjuvants (non-ionic surfactant, paraffinic oil, vegetable oil, mixture of fatty acids methyl esters plus surfactant blend, and organosilicone) on diquat efficacy was assessed on poverty brome, sterile oat, and Italian ryegrass in field and pot experiments. All tank mixtures with diquat increased diquat efficacy from 50-54% to 77-98% as for fresh weight reduction, indicating significant enhancement of diquat efficacy on grasses. The increased efficacy was most likely attributed to better droplet retention and diffusion on the leaf surfaces. When combined with non-ionic surfactant, diquat showed slightly more rapid control of grass weeds (i.e. symptoms were visible within a few hours after application).

Determinants of capital expenditures: Evidence from oil and mining sectors in Russia

This master’s thesis investigates the significant macroeconomic and firm level determinants of CAPEX in Russian oil and mining sectors. It also studies the Russian oil and mining sectors, its development, characteristics and current situation. The panel data methodology was implemented to identify the determinants of CAPEX in Russian oil and mining sectors and to test derived hypotheses. The core sample consists of annual financial data of 45 publicly listed Russian oil and mining sector companies. The timeframe of the thesis research is a six year period from 2007 to 2013. The findings of the master’s thesis have shown that Gross Sales, Return On Assets, Free Cash Flow and Long Term Debt are firm level performance variables along with Russian GDP, Export, Urals and the Reserve Fund are macroeconomic variables that determine the magnitude of new capital expenditures reported by publicly listed Russian oil and mining sector companies. These results are not controversial to the previous research paper, indeed they confirm them. Furthermore, the findings from the emerging countries, such as Malaysia, India and Portugal, are analogous to Russia. The empirical research is edifying and novel. Findings from this master’s thesis are highly valuable for the scientific community, especially, for researchers who investigate the determinant of CAPEX in developing countries. Moreover, the results can be utilized as a cogent argument, when companies and investors are doing strategic decisions, considering the Russian oil and mining sectors.

Sensory evaluation of black instant coffee beverage with some volatile compounds present in aromatic oil from roasted coffee

The oil obtained from Brazilian roasted coffee by supercritical CO2 extraction shows considerable aromatic properties, mainly composed by five aromatic compounds, 2-methylpyrazine; 2-furfurylalcohol, 2,5-dimethylpyrazine; γ-butyrolactone and 2-furfurylacetate. Sensory analyses were used to verify the influence of a mixture of these important classes of aromatic coffee compounds (pyrazines, furans and lactones) and of the roasted coffee aromatic oil on the coffee aroma and flavour of black instant freeze and spray-dried coffee beverages. In the acceptance evaluation of the aroma, the samples prepared with freeze-dried instant coffee without the mixture of volatile compounds (sample 4) were not significantly different from the freeze-dried instant coffee in which the aromatic coffee oil was added (sample 5) and from the sample prepared with freeze-dried coffee in which the mixture of the five volatile was added (sample 3), coincidentally from the same drying process. Therefore, sample (3) did not differ from samples prepared with spray dried instant coffee without (sample 1) and to which (sample 2) the mixture of volatile was added. Therefore, with respect to this attribute, the addition of this mixture did not interfere in this drink acceptance. Taking into consideration the flavor, samples prepared with freeze-dried instant coffee in which the aromatic coffee oil was added (5) and the samples with (3) and without (4) the mixture of the five volatile was added did not differ significantly, however sample (4) did not differ from samples (1) and (2). Regarding this attribute, the addition of the aromatic oil of roasted coffee or a mixture of volatile in samples of freeze-dried instant coffee had a better acceptance than those dried by spray dryer (1) and (2). Thus, the enrichment of drinks with the aromatic oil of roasted coffee, or even with the mixture of the five components did not influence the consumer acceptance with respect to the aroma, but exerts influence with respect to flavour.

Docosahexaenoic acid ethyl esther (DHAEE) microcapsule production by spray-drying: optimization by experimental design

Docosahexaenoic acid is an essential polyunsaturated fatty acid with important metabolic activities. Its conjugated double bonds make it susceptible to decomposition. Its stability may be improved through fatty acid entrapment with a spray-drying technique; however, the many parameters involved in this technique must be considered to avoid affecting the final product quality. Therefore, this study aimed to evaluate the entrapment conditions and yields of fish oil enriched with docosahexaenoic acid ethyl ester. Microcapsules were obtained from Acacia gum using a spray-drying technique. The experimental samples were analyzed by chromatography and delineated by Statistica software, which found the following optimum entrapment conditions: an inlet temperature of 188 °C; 30% core material; an N2 flow rate of 55 mm; and a pump flow rate of 12.5 mL/minute. These conditions provided a 66% yield of docosahexaenoic acid ethyl ester in the oil, corresponding to 19.8% of entrapped docosahexaenoic acid ethyl ester (w/w). This result was considered significant since 30% corresponded to wall material.

Analyse géographique des investissements internationaux de la China National Petroleum Corporation

Ce mémoire propose une analyse de l’expansion internationale de la China National Petroleum Corporation (CNPC) et des impacts de cette expansion sur la sécurité énergétique de la Chine. Dans le cadre de cette recherche, l’approvisionnement énergétique d’un pays est jugé sécuritaire lorsqu’une quantité suffisante de ressources nécessaires pour combler sa demande en énergie sont présentes, disponibles et accessibles et que son approvisionnement en services énergétiques demeure fiable et abordable. La recherche comporte quatre volets. Le premier volet porte sur les étapes de la restructuration de l’industrie pétrolière chinoise depuis 1949. Celle-ci est analysée au travers des changements dans les modes de gestion des compagnies pétrolières nationales et dans leurs relations avec le gouvernement chinois. Le deuxième volet traite de la diversification et des nouvelles spécialisations de CNPC. Ces aspects sont étudiés dans le cadre d’une analyse du pourcentage de ses actifs dans chaque segment industriel (aval, intermédiaire et amont) obtenus grâce à ses rapports annuels. Le troisième volet aborde la répartition géographique des activités de la compagnie que l’on étudie à l’aide d’une analyse approfondie de près de 150 investissements, acquisitions et contrats réalisés à l’étranger entre 1992 et 2014. Le quatrième volet aborde les impacts des investissements à l’étranger de la compagnie sur la sécurité énergétique de la Chine. Ces impacts sont mesurés par l’entremise d’une analyse des flux pétroliers internationaux vers la Chine que l’on compare à la production de CNPC par pays. Ce mémoire permet de déterminer que l’expansion internationale de CNPC sert d’abord et avant tout les intérêts économiques de la compagnie. Ce sont surtout ses investissements dans la construction d’infrastructures de transport (oléoducs, gazoducs ainsi que les usines et terminaux de liquéfaction de gaz naturel liquéfié) qui apportent des bénéfices directs à la sécurité énergétique de la Chine. La contribution des investissements dans les autres secteurs est beaucoup moins systématique et dépend largement de la période au cours de laquelle ils ont été effectués.

Investigations on the Effects of Petroleum Hydrocarbons on the Marine Bivalves Perna viridis (Linnaeus) and Sunetta scripta (Linne')

The thesis deals with different aspects connected with the distribution and toxicity of PHC in crude oils in the aquatic environment and marine molluscs. Information has been gathered and presented on the present status of research in the field based on a thorough review of recent literature. It is seen from the literature that the resident time of PHC becomes lesser and lesser when crude oil is discharged in large quantities into the coastal waters where excess oxygenation light penetration, temperature availability and strong tidal currents persist. This results in the reduction of the onslaught of oil pollution. This probably shows that taxic insult of crude oil in tropical shores will be relatively lesser than that occurring in temperate and boreal waters. However, there is no record of major episodal oil pollution comparable in quantum and extent to that of Torrey Canyon or Amoco Cadiz which prevents a more reliable analysis on the issue. Considerable controversy exists on the method of estimation of PHC in seawater. However, Ultra-violet fluorescence spectroscopy has been widely recommended as an analytical tool for the determination of total hydrocarbons. Similarly representation of values as chrysene equivalents has been recognised as the most reliable method of Quantum representation.

INVESTIGATIONS ON THE STRESS EFFECTS OF PETROLEUM HYDROCARBONS ON METAPENAEUS DOBSON (MIERS)

The present investigation has addressed the effects of PHC contaminated culture medium on the morphology, physiology and behaviour of shrimps. The shrimp Metapenaeus dobsoni is an important member of the crustacean animal community abounding the oil contaminated benthic regions of Cochin backwater system. Since it is known that true pollutants can disrupt the sustainability of ecosystems by its effect on species, populations and communities,a representative species was used for the study. The results discussed in this work is bound to help in understanding the ecotoxicant resistance that the animal may display under toxic conditions compared to dynamic steady-state systems in nature.

Combined toxic effects of oil and pesticides on selected marine invertebrates

In recent years, pollution in general and sea water pollution in particular, has become an important topic for national and international considerations. Because of its impact on society, marine pollution has attracted great attention from politicians, administrators, natural scientists and technologists all over the world. To save our environment from further deterioration, it is essential to have an assessment of this problem This thesis involves investigation of the lethal and sub lethal effects of four pesticides and two petroleum oil, individually and in combinations on two commercially important bivalves. Among the four pesticides used two are organophosphates and the other two are organochlorines. Synthetic Pesticides, especially organophosphates and organochlorines have become increasingly important additions to chemical wastes polluting natural aquatic Communities special attention is given in the present investigation to delineate the combined toxic effect of oil and pesticides. The results are presented under different sections to make the presentation meaningful.

Spray Pyrolysed Tin Chalcogenide Thin Films: Optimization of optoelectronic properties of SnS for possible photovoltaic application as an absorber layer

In the early 19th century, industrial revolution was fuelled mainly by the development of machine based manufacturing and the increased use of coal. Later on, the focal point shifted to oil, thanks to the mass-production technology, ease of transport/storage and also the (less) environmental issues in comparison with the coal!! By the dawn of 21st century, due to the depletion of oil reserves and pollution resulting from heavy usage of oil the demand for clean energy was on the rising edge. This ever growing demand has propelled research on photovoltaics which has emerged successful and is currently being looked up to as the only solace for meeting our present day energy requirements. The proven PV technology on commercial scale is based on silicon but the recent boom in the demand for photovoltaic modules has in turn created a shortage in supply of silicon. Also the technology is still not accessible to common man. This has onset the research and development work on moderately efficient, eco-friendly and low cost photovoltaic devices (solar cells). Thin film photovoltaic modules have made a breakthrough entry in the PV market on these grounds. Thin films have the potential to revolutionize the present cost structure of solar cells by eliminating the use of the expensive silicon wafers that alone accounts for above 50% of total module manufacturing cost.Well developed thin film photovoltaic technologies are based on amorphous silicon, CdTe and CuInSe2. However the cell fabrication process using amorphous silicon requires handling of very toxic gases (like phosphene, silane and borane) and costly technologies for cell fabrication. In the case of other materials too, there are difficulties like maintaining stoichiometry (especially in large area films), alleged environmental hazards and high cost of indium. Hence there is an urgent need for the development of materials that are easy to prepare, eco-friendly and available in abundance. The work presented in this thesis is an attempt towards the development of a cost-effective, eco-friendly material for thin film solar cells using simple economically viable technique. Sn-based window and absorber layers deposited using Chemical Spray Pyrolysis (CSP) technique have been chosen for the purpose