Effectiveness of asynchronous channel assignment scheme in heterogeneous WLANs

Due to their popularity, dense deployments of wireless local area networks (WLANs) are becoming a common feature of many cities around the world. However, with only a limited number of channels available, the problem of increased interference can severely degrade the performance of WLANs if an effective channel assignment scheme is not employed. Previous studies on channel assignment in WLANs almost always assume that all access points (AP) employ the same channel assignment scheme which is clearly unrealistic. On the other hand, to the best of our knowledge, the interaction between different channel assignment schemes has also not been studied before. Therefore, in this paper, we investigate the effectiveness of our earlier proposed asynchronous channel assignment scheme in these heterogeneous WLANs scenarios. Simulation results show that our proposed scheme is still able to provide robust performance gains even in these scenarios.

An asynchronous distributed dynamic channel assignment scheme for dense WLANs

Wireless local area networks (WLANs) have changed the way many of us communicate, work, play and live. Due to its popularity, dense deployments are becoming a norm in many cities around the world. However, increased interference and traffic demands can severely limit the aggregate throughput achievable if an effective channel assignment scheme is not used. In this paper, we propose an enhanced asynchronous distributed and dynamic channel assignment scheme that is simple to implement, does not require any knowledge of the throughput function, allows asynchronous channel switching by each access point (AP) and is superior in performance. Simulation results show that our proposed scheme converges much faster than previously reported synchronous schemes, with a reduction in convergence time and channel switches by tip to 73.8% and 30.0% respectively.

An improved distributed dynamic channel assignment scheme for dense WLANs

The popularity of wireless local area networks (WLANs) has resulted in their dense deployment in many cities around the world. The increased interference among different WLANs severely degrades the throughput achievable. This problem has been further exacerbated by the limited number of frequency channels available. An improved distributed and dynamic channel assignment scheme that is simple to implement and does not depend on the knowledge of the throughput function is proposed in this work. It also allows each access point (AP) to asynchronously switch to the new best channel. Simulation results show that our proposed scheme converges much faster than similar previously reported work, with a reduction in convergence time and channel switches as much as 77.3% and 52.3% respectively. When it is employed in dynamic environments, the throughput improves by up to 12.7%.

A Packet/Frame sync detector based on statistical mode with application to wireless-USB

Wireless Personal Area Networks (WPANs) are offering high data rates suitable for interconnecting high bandwidth personal consumer devices (Wireless HD streaming, Wireless-USB and Bluetooth EDR). ECMA-368 is the Physical (PHY) and Media Access Control (MAC) backbone of many of these wireless devices. WPAN devices tend to operate in an ad-hoc based network and therefore it is important to successfully latch onto the network and become part of one of the available piconets. This paper presents a new algorithm for detecting the Packet/Fame Sync (PFS) signal in ECMA-368 to identify piconets and aid symbol timing. The algorithm is based on correlating the received PFS symbols with the expected locally stored symbols over the 24 or 12 PFS symbols, but selecting the likely TFC based on the highest statistical mode from the 24 or 12 best correlation results. The results are very favorable showing an improvement margin in the order of 11.5dB in reference sensitivity tests between the required performance using this algorithm and the performance of comparable systems.

A dual QPSK soft-demapper for ECMA-368 exploiting time-domain spreading and guard interval diversity

When considering the relative fast processing speed and low power requirements for Wireless Personal Area Networks (WPAN) and Wireless Universal Serial Bus (USB) consumer based products, then the efficiency and cost effectiveness of these products become paramount. This paper presents an improved soft-output QPSK demapper suitable for the products above that not only exploits time diversity and guard carrier diversity, but also merges the demapping and symbol combining functions together to minimize CPU cycles, or memory access dependant upon the chosen implementation architecture. The proposed demapper is presented in the context of Multiband OFDM version of UWB (ECMA-368) as the chosen physical implementation for high-rate Wireless USB.

Impact of interference on throughput in dense WLANs with multiple APs

The popularity of wireless local area networks (WLANs) has resulted in their dense deployments around the world. While this increases capacity and coverage, the problem of increased interference can severely degrade the performance of WLANs. However, the impact of interference on throughput in dense WLANs with multiple access points (APs) has had very limited prior research. This is believed to be due to 1) the inaccurate assumption that throughput is always a monotonically decreasing function of interference and 2) the prohibitively high complexity of an accurate analytical model. In this work, firstly we provide a useful classification of commonly found interference scenarios. Secondly, we investigate the impact of interference on throughput for each class based on an approach that determines the possibility of parallel transmissions. Extensive packet-level simulations using OPNET have been performed to support the observations made. Interestingly, results have shown that in some topologies, increased interference can lead to higher throughput and vice versa.

Design issues toward a cost effective physical layer for multiband OFDM (ECMA-368) in consumer products

The creation of Wireless Personal Area Networks (WPANs) offers the Consumer Electronics industry a mechanism to truly unwire consumer products, leading to portability and ease of installation as never seen before. WPAN's can offer data-rates exceeding those that are required to convey high quality broadcast video, thus users can easily connect to high quality video for multimedia presentations in education, libraries, advertising, or have a wireless connection at home. There have been many WPAN proposals, but this paper concentrates on ECMA-368 as this standard has the largest industrial and implementers' forum backing. With the aim to effective consumer electronic define and create cost equipment this paper discusses the technology behind ECMA-368 physical layer, the design freedom availabilities, the required processing, buffer memory requirements and implementation considerations while concentrating on supporting all the offered data-rates(1).

A dual QPSK soft-demapper for multiband OFDM exploiting time-domain spreading and guard interval diversity

When considering the relative fast processing speeds and low power requirements for Wireless Personal Area Networks (WPAN) including Wireless Universal Serial Bus (WUSB) consumer based products, then the efficiency and cost effectiveness of these products become paramount. This paper presents an improved soft-output QPSK demapper suitable for the products above that not only exploits time diversity and guard carrier diversity, but also merges the demapping and symbol combining functions together to minimize CPU cycles, or memory access dependant upon the chosen implementation architecture. The proposed demapper is presented in the context of Multiband OFDM version of Ultra Wideband (UWB) (ECMA-368) as the chosen physical implementation for high-rate Wireless US8(1).

Quality time [QoS in 802.11e]

Wireless local area networks (WLANs) based on the IEEE 802.11 standard are now widespread. Most are used to provide access for mobile devices to a conventional wired infrastructure, and some are used where wires are not possible, forming an ad hoc network of their own. There are several varieties at the physical or radio layer (802.11, 802.11a, 802.11b, 802.11g), with each featuring different data rates, modulation schemes and transmission frequencies. However, all of them share a common medium access control (MAC) layer. As this is largely based on a contention approach, it does not allow prioritising of traffic or stations, so it cannot easily provide the quality of service (QoS) required by time-sensitive applications, such as voice or video transmission. In order to address this shortfall of the technology, the IEEE set up a task group that is aiming to enhance the MAC layer protocol so that it can provide QoS. The latest draft at the time of writing is Draft 11, dated October 2004. The article describes the yet-to-be-ratified 802.11e standard and is based on that draft.

Sistema de gerência de energia para redes locais

Este trabalho apresenta a proposta e a implementação de um sistema de gerência de energia para redes locais de computadores (Local Area Networks ou LANs). Desde sua introdução, no início dos anos 90, os mecanismos de gerência de energia para computadores têm contribuído de maneira significativa para a redução do consumo nos períodos de inatividade, mas podem ter seu efeito minimizado por uma série de fatores, dentre os quais destaca-se a conexão do equipamento a uma rede. Em linhas gerais, o objetivo do sistema proposto é, justamente, facilitar a gerência de energia em ambientes de rede. O funcionamento do sistema é baseado na aplicação de políticas de consumo definidas pelo administrador da rede. As políticas podem ser aplicadas em duas situações distintas: em horários pré-determinados (p. ex. depois do horário comercial), quando podem ajudar a reduzir o desperdício de energia, ou em resposta a alterações no fornecimento de energia, caso a rede seja protegida por no-breaks, quando a redução no consumo resulta em maior tempo de autonomia da fonte reserva (banco de baterias). As políticas são configuradas através de um mecanismo flexível, que permite não apenas desligar os equipamentos, mas colocá-los em estados intermediários de consumo e executar outros tipos de ações. A arquitetura do sistema é baseada no modelo SNMP (Simple Network Management Protocol) de gerência de redes. É composta, basicamente, de agentes, elementos de software que residem nos equipamentos da rede e detêm o conhecimento específico sobre suas características de consumo de eletricidade, e de um gerente, elemento central que contém a configuração das políticas de consumo e que é responsável pelo monitoramento e controle dos agentes. Gerente e agentes comunicam-se através do protocolo SNMP, trocando informações segundo uma base de informações (MIB) projetada especificamente para a gerência de energia. A ênfase da parte prática do trabalho está no gerente, que foi inteiramente implementado através da linguagem Java, utilizando bibliotecas disponíveis gratuitamente. Adicionalmente, foi implementado um agente-protótipo para a plataforma Windows, o que permitiu observar o sistema completo em execução. Os testes permitiram validar a praticabilidade da arquitetura e estimar o ganho potencial proporcionado pela utilização do sistema. São apresentadas medições que demonstram um aumento de até 6 vezes na autonomia do banco de baterias do no-break para uma configuração de rede pequena, utilizando o sistema para desligar automaticamente 90% dos computadores durante um corte no fornecimento externo. A economia decorrente da redução de consumo em horários de inatividade foi estimada em até R$0,63 por computador no período de um ano (tomando por base a tarifa média praticada no Brasil entre janeiro e maio de 2002).

Redes locais e downsizing de sistemas de informação : um estudo em bancos brasileiros

Ao optar por redes locais (LAN - Local Area Networks) de microcomputadores, em lugar de ampliar os investimentos nos sistemas de grande porte que já possuem instalados, diversas empresas do setor bancário no Brasil estão adotando o conceito de downsizing, expressão que identifica a política de redução do porte dos equipamentos de informática utilizados para executar o processamento de informações corporativas. A adoção deste tipo de política, longe de ser uma ocorrência episódica, tem características de tendência geral para o setor nos próximos anos. Este trabalho faz uma investigação do alcance dessa tendência no setor bancário brasileiro e uma análise dos fatores que têm impulsionado a implementação de diferentes estratégias de downsizing de sistemas de informação

Uma análise exploratória da indústria de serviços PWLAN Wi-Fi no Brasil: em busca de uma vantagem competitiva sustentável

As telecomunicações no mundo têm avançado a passos largos na oferta de novas tecnologias e padrões que viabilizam e flexibilizam a transmissão / recepção de informações entre pessoas e a Internet. Em especial, no que tange à ubiqüidade, o uso de dispositivos de comunicações móveis sem fio, como telefones celulares e PDAs (Personnal Digital Assistant), tem permitido às empresas alcançarem seus clientes a qualquer hora e em qualquer lugar. Muitos padrões de comunicação wireless têm surgido, inicialmente na indústria de telefonia móvel celular e, em seguida, na indústria de computadores e PDAs, habilitando a comunicação wireless de dados em banda larga e o comércio eletrônico móvel (m-commerce). Em especial, o padrão Wi-Fi tem sido difundido mundialmente através da expansão de redes públicas sem fio (PWLANs). Assim, os fabricantes de equipamentos de telecomunicações, as empresas operadoras de serviços de telefonia fixa e móvel e até provedores de acesso à Internet têm manifestado grande interesse nessa área por perceberem novas oportunidades de aumento de receita através da tecnologia Wi-Fi. Todos estes aspectos da recente história do Wi-Fi têm gerado questionamentos quanto a seu futuro sucesso e real geração de vantagem competitiva sustentável, não obstante o volume de negócios relativos a esta tecnologia estar em franco crescimento. Este trabalho propõe-se a analisar o mercado de serviços PWLAN Wi-Fi brasileiro, identificando os principais atores e os modelos de negócio praticados por eles, comparando esses modelos aos modelos identificados por Shubar e Lechner. O estudo propõe-se, também, a avaliar tais empresas e seus respectivos modelos de negócio segundo o framework VRIO desenvolvido por Barney com base na visão estratégica baseada em recursos (RBV- Resource Based View).

Chronological Monte Carlo-based assessment of distribution system reliability

Regulatory authorities in many countries, in order to maintain an acceptable balance between appropriate customer service qualities and costs, are introducing a performance-based regulation. These regulations impose penalties, and in some cases rewards, which introduce a component of financial risk to an electric power utility due to the uncertainty associated with preserving a specific level of system reliability. In Brazil, for instance, one of the reliability indices receiving special attention by the utilities is the Maximum Continuous Interruption Duration per customer (MCID). This paper describes a chronological Monte Carlo simulation approach to evaluate probability distributions of reliability indices, including the MCID, and the corresponding penalties. In order to get the desired efficiency, modern computational techniques are used for modeling (UML -Unified Modeling Language) as well as for programming (Object- Oriented Programming). Case studies on a simple distribution network and on real Brazilian distribution systems are presented and discussed. © Copyright KTH 2006.

Network reconfiguration of distribution systems using metaheuristics and reliability measures

In an evermore competitive environment, power distribution companies need to continuously monitor and improve the reliability indices of their systems. The network reconfiguration (NR) of a distribution system is a technique that well adapts to this new deregulated environment for it allows improvement of system reliability indices without the onus involved in procuring new equipment. This paper presents a reliability-based NR methodology that uses metaheuristic techniques to search for the optimal network configuration. Three metaheuristics, i.e. Tabu Search, Evolution Strategy, and Differential Evolution, are tested using a Brazilian distribution network and the results are discussed. © 2009 IEEE.

Spatial load forecasting using a demand propagation approach

A method for spatial electric load forecasting using multi-agent systems, especially suited to simulate the local effect of special loads in distribution systems is presented. The method based on multi-agent systems uses two kinds of agents: reactive and proactive. The reactive agents represent each sub-zone in the service zone, characterizing each one with their corresponding load level, represented in a real number, and their relationships with other sub-zones represented in development probabilities. The proactive agent carry the new load expected to be allocated because of the new special load, this agent distribute the new load in a propagation pattern. The results are presented with maps of future expected load levels in the service zone. The method is tested with data from a mid-size city real distribution system, simulating the effect of a load with attraction and repulsion attributes. The method presents good results and performance. © 2011 IEEE.