Otimização energética em redes óticas de próxima geração Flex-grid vs Fixed-grid

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Eletrónica e Telecomunicações

Étude des propriétés plasmoniques des réseaux de nanotrous

Les réseaux de nanotrous sont des structures plasmoniques ayant un énorme potentiel en tant que transducteurs pour la conception de biocapteurs. De telles structures sont prometteuses pour l’élaboration de biocapteurs capable d’effectuer du criblage à haut débit. L’intérêt de travailler avec des réseaux de nanotrous est dû à la simplicité d’excitation des polaritons de plasmons de surface en transmission directe, à la sensibilité et à la facilité de fabrication de ces senseurs. L’architecture de tels réseaux métalliques permet la conception de nanostructures ayant de multiples propriétés plasmoniques. L’intensité, la signature spectrale et la sensibilité du signal plasmonique sont grandement affectées par l’aspect physique du réseau de nanotrous. L’optimisation du signal plasmonique nécessite ainsi un ajustement du diamètre des trous, de la périodicité et de la composition métallique du réseau. L'agencement de l'ensemble de ces paramètres permet d'identifier une structure optimale possédant une périodicité de 1000 nm, un diamètre des nanotrous de 600-650 nm et un film métallique ayant une épaisseur de 125 nm d'or. Ce type de transducteur a une sensibilité en solution de 500-600 nm/RIU pour des bandes plasmoniques situées entre 600-700 nm. L'intérêt de travailler avec cette structure est la possibilité d'exciter les plasmons de polaritons de surface (SPPs) selon deux modes d'excitation : en transmission exaltée (EOT) ou en réflexion totale interne par résonance des plasmons de surface (SPR). Une comparaison entre les propriétés plasmoniques des senseurs selon les modes d'excitation permet de déterminer expérimentalement que le couplage de la lumière avec les ondes de SPP de Bloch (BW-SPPs) en transmission directe résulte en un champ électromagnétique davantage propagatif que localisé. D'un point de vue analytique, la biodétection de l'IgG en SPR est 6 fois plus sensible par rapport au mode EOT pour une même structure. Une étude du signal plasmonique associé au BW-SPP pour un certain mode de diffraction démontre que la distance de pénétration de ces structures en EOT est d'environ 140 nm. La limite de détection de l'IgG humain pour un réseau de nanotrous de 1000 nm de périodicité est d'environ 50 nM en EOT. Ce mémoire démontre la viabilité des réseaux de nanotrous pour effectuer de la biodétection par criblage à haut débit lors de prochaines recherches. L'investigation de l'effet de l'angle d'excitation en transmission exaltée par rapport au signal plasmonique associé au mode (1,0) d'un réseau de nanotrous de 820 nm d'or démontre que la sensibilité en solution n'est pas proportionnelle à la sensibilité en surface du senseur. En fait, une optimisation de l'angle d'incidence pour le mode (1,0) de diffraction des BW-SPP permet d'amplifier la sensibilité en surface du senseur jusqu'à 3-fois pour un angle de 13,3°. Ce mémoire démontre ainsi la nécessité d'optimiser l'angle d'excitation et les propriétés physiques du senseur afin de développer un transducteur de grande sensibilité basé sur l'excitation en transmission de réseaux de nanotrous.

Transparent p-AgCoO2/n-ZnO diode heterojunction fabricated by pulsed laser deposition

Transparent diode heterojunction on ITO coated glass substrates was fabricated using p-type AgCoO2 and n-type ZnO films by pulsed laser deposition (PLD). The PLD of AgCoO2 thin films was carried out using the pelletized sintered target of AgCoO2 powder, which was synthesized in-house by the hydrothermal process. The band gap of these thin films was found to be ~3.89 eV and they had transmission of~55% in the visible spectral region. Although Hall measurements could only indicate mixed carrier type conduction but thermoelectric power measurements of Seebeck coefficient confirmed the p-type conductivity of the grown AgCoO2 films. The PLD grown ZnO films showed a band gap of ~3.28 eV, an average optical transmission of ~85% and n-type carrier density of~4.6×1019 cm− 3. The junction between p-AgCoO2 and n-ZnO was found to be rectifying. The ratio of forward current to the reverse current was about 7 at 1.5 V. The diode ideality factor was much greater than 2.

Thermal transport properties of selected ferroelectrics, mixed valance perovskites and dielectric ceramics using photopyroelectric technique

Photothermal spectroscopy is a group of high sensitivity methods used to measure optical absorption and thermal characteristics of a sample.The basis of photothermal spectroscopy is a photo-induced change in the thermal state of the sample.Light energy absorbed and not lost by subsequent emission results in sample heating.This heating results in a temperature change as well as changes in thermodynamic parameters of the sample which are related to temperature.Measurements of the temperature,pressure,or density changes that occur due to optical absorption are ultimately the basis for the photothermal spectroscopic methods.This is a more direct measure of optical absorption than optical transmission based spectroscopies.Sample heating is a direct consequence of optical absorption and so photothermal spectroscopy signals are directly dependent on light absorption.Scattering and reflection losses do not produce photothermal signals.Subsequently,photothermal spectroscopy more accurately measures optical absorption in scattering solutions,in solids,and at interfaces.This aspect makes it particularly attractive for application to surface and solid absorption studies,and studies in scattering media.

The Surface Plasmon Resonance of Supported Noble Metal Nanoparticles: Characterization, Laser Tailoring, and SERS Application

This work deals with the optical properties of supported noble metal nanoparticles, which are dominated by the so-called Mie resonance and are strongly dependent on the particles’ morphology. For this reason, characterization and control of the dimension of these systems are desired in order to optimize their applications. Gold and silver nanoparticles have been produced on dielectric supports like quartz glass, sapphire and rutile, by the technique of vapor deposition under ultra-high vacuum conditions. During the preparation, coalescence is observed as an important mechanism of cluster growth. The particles have been studied in situ by optical transmission spectroscopy and ex situ by atomic force microscopy. It is shown that the morphology of the aggregates can be regarded as oblate spheroids. A theoretical treatment of their optical properties, based on the quasistatic approximation, and its combination with results obtained by atomic force microscopy give a detailed characterization of the nanoparticles. This method has been compared with transmission electron microscopy and the results are in excellent agreement. Tailoring of the clusters’ dimensions by irradiation with nanosecond-pulsed laser light has been investigated. Selected particles are heated within the ensemble by excitation of the Mie resonance under irradiation with a tunable laser source. Laser-induced coalescence prevents strongly tailoring of the particle size. Nevertheless, control of the particle shape is possible. Laser-tailored ensembles have been tested as substrates for surface-enhanced Raman spectroscopy (SERS), leading to an improvement of the results. Moreover, they constitute reproducible, robust and tunable SERS-substrates with a high potential for specific applications, in the present case focused on environmental protection. Thereby, these SERS-substrates are ideally suited for routine measurements.

Elaboration and optimization of (Y,Er)Al(3)(BO(3))(4) glassy planar waveguides through the sol-gel process

In this work, a sol-gel route was used to prepare Y(0.9)Er(0.1)Al(3)(BO(3))(4) glassy thin films by spin-coating technique looking for the preparation and optimization of planar waveguides for integrated optics. The films were deposited on silica and silicon substrates using stable sols synthesized by the sol-gel process. Deposits with thicknesses ranging between 520 and 720 nm were prepared by a multi-layer process involving heat treatments at different temperatures from glass transition to the film crystallization and using heating rates of 2 degrees C/min. The structural characterization of the layers was performed by using grazing incidence X-ray diffraction and Raman spectroscopy as a function of the heat treatment. Microstructural evolution in terms of annealing temperatures was followed by high resolution scanning electron microscopy and atomic force microscopy. Optical transmission spectra were used to determine the refractive index and the film thicknesses through the envelope method. The optical and guiding properties of the films were studied by m-line spectroscopy. The best films were monomode with 620 nm thickness and a refractive index around 1.664 at 980 nm wavelength. They showed good waveguiding properties with high light-coupling efficiency and low propagation loss at 632.8 and 1550 nm of about 0.88 dB/cm. (C) 2009 Elsevier B.V. All rights reserved.

New tungstate fluorophosphate glasses

\A new class of tungstate fluorophosphate glasses was identified in the NaPO3-BaF2-WO3 ternary system. The variation of several physical properties was determined with respect to chemical composition. Characteristic temperatures, density and refractive index increase as tungsten oxide content increases. The optical transmission range and specially the energy bandgap depend of the WO3 amount. No crystallization could be observed for the Most WO3 concentrated vitreous samples (greater than or equal to20% molar). Color and optical properties of the glasses depend of the melting time because of the presence of reduced tungsten species like W5+ and W4+. In addition, photodarkening is observed in tungsten rich glass samples under UV laser illumination and this phenomenon can be reversible by heat treatment near the glass transition temperature. (C) 2004 Published by Elsevier B.V.

Antimony oxide based glasses

Glass formation has been investigated in binary systems based on antimony oxide as the main glass former: (100-x)Sb2O3-xWO3, (5 < x < 65), (100 - x)Sb2O3-xSbPO(4), (5 < x < 80) and (100 - x)Sb2O3-x[Sb(PO3)(3)](n), (10 < x < 40). Ternary systems derived from the Sb2O3-WO3 binary glass have also been studied: Sb2O3-WO3-BaF2 Sb2O3-WO3-NaF and Sb2O3-WO3-[Sb(PO3)(3)](n). Glass transition temperature ranges from 280 degreesC to 380 degreesC. It increases as the concentration in tungsten oxide or antimony phosphate increases. Refractive index is larger than 2. Tungsten-containing glasses are yellow in transmission and turn green at the largest WO3 content. Optical transmission and temperatures of glass transition, T-g, onset of the crystallization. T-x, and maximum of crystallization, T-p, have been measured using differential scanning calorimetry (DSC). These glasses have potential photonic applications. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Propriedades estruturais, ópticas e magnéticas de filmes de GaMnN

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de efeitos de Faraday e Kerr ópticos em estruturas multicamadas com efeito de transmissão óptica extraordinária

Neste trabalho foi investigada e otimizada uma nova heteroestrutura planar de três camadas com efeitos magneto-ópticos de Faraday e de Kerr aprimorados e transmissão óptica extraordinária na região de comprimento de onda de 925 a 1200 nm. Esta estrutura consiste de uma placa metálica não magnética de ouro perfurada periodicamente e colocada sobre duas finas camadas dielétricas, sendo uma composta por um material não magnético e outra composta por um material magnético (Bi-substituted Yttrium Iron Garnet) uniformemente magnetizado perpendicularmente ao seu plano. Analisando e otimizando esta estrutura, obteve-se rotação de Faraday e rotação de Kerr três vezes e nove vezes maior, respectivamente, que os de dispositivos análogos publicados na literatura. Além disso, esta estrutura foi otimizada para obter um aumento de 40% da transmissão óptica extraordinária, preservando o ângulo de rotação de Faraday. A heteroestrutura investigada pode ser utilizada em dispositivos ópticos não recíprocos.

Crescimento e caracterização dos cristais de sulfato de níquel hexahidratado dopados com íons [MnH2O]2+ e com sulfato de magnésio heptahidratado

Neste trabalho, cristais de sulfato níquel dopados com íons de manganês (NSH: Mn) e cristais de sulfato níquel dopados com de íon de magnésio (NMgSH) foram crescidos e posteriormente caracterizados pelas técnicas de difração de raios X e de espectroscopia Raman. Os resultados obtidos mostraram que os cristais dopados possuem estrutura muito semelhante a do cristal de sulfato de níquel puro (NSH), com uma deformação anisotrópica nas dimensões da célula unitária em relação ao cristal puro. O objetivo do presente estudo foi crescer dois novos monocristais de boa qualidade óptica para serem usados como filtros ópticos de banda passante. Os cristais de sulfato de níquel hexa-hidratado (NHS) são conhecidos por possuírem espectros de transmissão óptica, que tem atraído muita atenção, pois apresentam duas regiões com alta eficiência de transmissão, aproximadamente 80%, sendo a primeira região entre 200 e 350 nm e a segunda entre 400 e 600 nm, e uma alta eficiência de absorção em outras regiões do espectro UV-VIS. Um espectro de transmissão de luz com estas características é semelhante a um filtro óptico. Analises Termogravimetric (TGA) foram realizadas para cristais puros e dopados. A temperatura de decomposição obtida para o NSH foi de 73 ° C, enquanto que os cristais de NSH:Mn e NMgSH apresentam valores de 82 ° C e 86 º C, respectivamente. Como pode ser facilmente percebido, a estabilidade térmica de cristais com o íons de Mn ou Mg em suas estruturas é significativamente maior. A banda de transmissão entre 200 e 350 nm no espectro óptico de NSH foi observada com redução significativa em sua largura nos espectros de transmissão dos cristais dopados restringindo assim a região do espectro conhecida como UVA.

Membranas de celulose bacteriana contendo nanopartículas de 'YVO IND. 4': 'YB POT. 3+': 'ER POT. 3+'/'HO POT. 3+' para aplicações envolvendo conversão ascendente de energia

Pós-graduação em Química - IQ

Compósitos ppticamente transparentes baseados em celulose bacteriana e boehmita, siloxano e/ou sistema boehmita-siloxano

The present invention comprises composites with multifunctional characteristics, being capable of substituting glass, with significant advantages, with particular emphasis on flexibility, for a variety of applications such as, for example, display screens and others. Among other aspects, the product that constitutes the object of the invention is particularly characterized by rendering bacterial cellulose transparent, in addition to being flexible, biocompatible and able to replace glass in 100% of possible applications. Among other aspects, the development of the composites according to the present invention allows an effective increase in optical transmission, enabling an optical transmission of more than 90%, such transparency being necessary, equally, for the development of medical devices, for example.

Síntese e propriedades fotoluminescentes do óxido de cério dopado com magnésio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)