Parameters of the near-bottom nepheloid layer off the northwestern Africa coast

Vertical profiles of light scattering at a right angle and turbidity profiles in seawater indicating suspended matter concentration in the near-bottom nepheloid layer (NNL) were measured simultaneously with temperature, salinity, and density profiles at the continental slope off the northwestern Africa. About 100 stations 5' apart in latitude and longitude were carried out over an ocean area of 6100 sq. km. Special features of the NNL variability in the area were analyzed. It was found that some structural parameters of the NNL (maximum transparency depth, that is the upper boundary of NNL; NNL thickness; maximum and total turbidity) correlate with ocean depth. On the average, thickness of the NNL in the area is 20-40% of the ocean depth. At most stations the NNL is fairly strong. In the shelf region NNL turbidity was influenced by the intensive near-shore upwelling. Formation of ''high-energy near-bottom layers'' in the shelf region resulted from passing of a mesoscale cyclonic eddy that caused redistribution of measured quantities within the entire water column.

Grain size investigations of sediments off the coast of Istria

Composition, grain-size distribution, and areal extent of Recent sediments from the Northern Adriatic Sea along the Istrian coast have been studied. Thirty one stations in four sections vertical to the coast were investigated; for comparison 58 samples from five small bays were also analyzed. Biogenic carbonate sediments are deposited on the shallow North Adriatic shelf off the Istrian coast. Only at a greater distance from the coast are these carbonate sediments being mixed with siliceous material brought in by the Alpine rivers Po, Adige, and Brenta. Graphical analysis of grain-size distribution curves shows a sediment composition of normally three, and only in the most seaward area, of four major constituents. Constituent 1 represents the washed-in terrestrial material of clay size (Terra Rossa) from the Istrian coastal area. Constituent 2 consists of fine to medium sand. Constituent 3 contains the heterogeneous biogenic material. Crushing by organisms and by sediment eaters reduces the coarse biogenic material into small pieces generating constituent 2. Between these two constituents there is a dynamic equilibrium. Depending upon where the equilibrium is, between the extremes of production and crushing, the resulting constituent 2 is finer or coarser. Constituent 4 is composed of the fine sandy material from the Alpine rivers. In the most seaward area constituents 2 and 4 are mixed. The total carbonate content of the samples depends on the distance from the coast. In the near coastal area in high energy environments, the carbonate content is about 80 %. At a distance of 2 to 3 km from the coast there is a carbonate minimum because of the higher rate of sedimentation of clay-sized terrestrial, noncarbonate material at extremely low energy environments. In an area between 5 and 20 km off the coast, the carbonate content is about 75 %. More than 20 km from the shore, the carbonate content diminishes rapidly to values of about 30 % through mixing with siliceous material from the Alpine rivers. The carbonate content of the individual fractions increases with increasing grain-size to a maximum of about 90 % within the coarse sand fractions. Beyond 20 km from the coast the samples show a carbonate minimum of about 13 % within the sand-size classes from 1.5 to 0.7 zeta¬? through mixing with siliceous material from the alpine rivers. By means of grain-size distribution and carbonate content, four sediment zones parallel to the coast were separated. Genetically they are closely connected with the zonation of the benthic fauna. Two cores show a characteristic vertical distribution of the sediment. The surface zone is inversely graded, that means the coarse fractions are at the top and the fine fractions are at the bottom. This is the effect of crushing of the biogenic material produced at the surface by predatory organisms and by sediment eaters. lt is proposed that at a depth of about 30 cm a chemical solution process begins which leads to diminution of the original sediment from a fine to medium sand to a silt. The carbonate content decreases from about 75 % at the surface to 65 % at a depth of 100 cm. The increase of the noncarbonate components by 10 % corresponds to a decrease in the initial amount of sediment (CaC03=75 %) by roughly 30 % through solution. With increasing depth the carbonate content of the individual fractions becomes more and more uniform. At the surface the variation is from 30 % to 90 %, at the bottom it varies only between 50 % and 75 %. Comparable investigations of small-bay sediments showed a c1ear dependence of sediment/faunal zonation from the energy of the environment. The investigations show that the composition and three-dimensional distribution of the Istrian coastal sediments can not be predicted only from one or a few measurable factors. Sedimentation and syngenetic changes must be considered as a complex interaction between external factors and the actions of producing and destroying organisms that are in dynamic equilibrium. The results obtained from investigations of these recent sediments may be of value for interpreting fossil sediments only with strong limitations.

Shallow water marine sediment bacterial community shifts along a natural CO2 gradient in the Mediterranean Sea Off vulcano, Italy

The effects of increasing atmospheric CO(2) on ocean ecosystems are a major environmental concern, as rapid shoaling of the carbonate saturation horizon is exposing vast areas of marine sediments to corrosive waters worldwide. Natural CO(2) gradients off Vulcano, Italy, have revealed profound ecosystem changes along rocky shore habitats as carbonate saturation levels decrease, but no investigations have yet been made of the sedimentary habitat. Here, we sampled the upper 2 cm of volcanic sand in three zones, ambient (median pCO(2) 419 µatm, minimum Omega (arag) 3.77), moderately CO(2)-enriched (median pCO(2) 592 µatm, minimum Omega (arag) 2.96), and highly CO(2)-enriched (median pCO(2) 1611 µatm, minimum Omega (arag) 0.35). We tested the hypothesis that increasing levels of seawater pCO(2) would cause significant shifts in sediment bacterial community composition, as shown recently in epilithic biofilms at the study site. In this study, 454 pyrosequencing of the V1 to V3 region of the 16S rRNA gene revealed a shift in community composition with increasing pCO(2). The relative abundances of most of the dominant genera were unaffected by the pCO(2) gradient, although there were significant differences for some 5 % of the genera present (viz. Georgenia, Lutibacter, Photobacterium, Acinetobacter, and Paenibacillus), and Shannon Diversity was greatest in sediments subject to long-term acidification (>100 years). Overall, this supports the view that globally increased ocean pCO(2) will be associated with changes in sediment bacterial community composition but that most of these organisms are resilient. However, further work is required to assess whether these results apply to other types of coastal sediments and whether the changes in relative abundance of bacterial taxa that we observed can significantly alter the biogeochemical functions of marine sediments.

Shore party and helicopter support team operations /

"Supersession, FMFM 4-3, Shore Party and Helicopter Support Team Operations, of 11 August 1967."

Moraines and shore lines of the Lake Superior basin /

At head of title: Dept. of the interior.

Report to the President by the Emergency Board appointed January 14, 1948 pursuant to section 10 of the Railway labor act, as amended, to investigate unadjusted disputes between the Chicago, North Shore and Milwaukee Railway Company and certain of its employees represented by International Union of Amalgamated Association of Street Electric Railway and Motor Coach Employees of America, a labor organization.

Signed, Harry H. Schwartz, chairman, Russell Wolfe, Robert E. Stone.

Análise da atividade cognitiva do operador de sala de controle da produção de controle da produção de petróleo on-shore: uma abordagem da ergonomia para a gestão das restrições do sistema sociotécnico

This master's thesis aims to analyze the activity of the operators in a control room of the processes of production on-shore petroleum, with a focus on sociotechnical restrictions that interfere in the decision-making process and the actions of operators and therefore, the strategies (individual and collective) to regulate and maintain the operator action required and the safety of the system, together. The activity in focus involves the supervision and control of the production of thousands of barrels of oil/day in a complex and dispersed production’s structures built in an extension of 80 km. This operational framework highlights the importance of this activity for the fulfilment of the targets local and corporate efficiency, good management of the environment, health and safety of operators. This is an exploratory research and in the field, which uses the methodology of Ergonomic Analysis of the Work, composed of observational techniques and interactional, having as locus control room of the processes of production on-shore oil of an oil company. The population of this research is formed by operators in the control room of an Brazilian oil company. The results showed that the supervisory activity and control of the superheated steam injection is an complex context, demands greater attention, concentration, calculations, comparisons, trend analysis and decision making. The activity is collectively constructed between the control room operator, field operator and the supplier of steam. The research showed that the processes of communication and collaboration between the control room , fields and support staff are the key elements of this activity. The study shows that the operators have the autonomy and the elements necessary for work; and that there is continuous investments to improve the technology used and that the operators report sleep disturbances as a result of chronic exposure to night work. The study contributed with proposals for transformation of this activity: with regard to the installation of a area reserved for food in control room, the update the screens of the supervisory current operating condition, the periodic visits by room operators in the field, standardization of production reports, development assistance and standardization of nomenclature of controlling stations steam systems, to improve the conditions of realization of the activity, improve the quality of products produced by operators and contribute to reduce the possibility of slips or shifts in the activity.

Benthos activity, abundance and biomass in surface sediments off Morocco, Northwest Africa

Macro- and meiobenthic abundance and biomass as well as metabolic activity (respiration, ETS activity) have been studied along a transect ranging from 130 to 3000 m water depth off northern Morocco (35° N) during "Meteor" cruise No. 53 (1980). The distribution of chloroplastic pigment concentration (chlorophyll a, pheophytins) in the sediment has been investigated as a measure of sedimented primary organic matter. High chloroplastic pigment concentrations were found on the shelf and around the shelf break, but values declined rapidly between 200 and 600 m depth. Below 1200 m pigment concentrations remained at a relatively uniform low level. Macrobenthic abundance and biomass (wet weight) decreased with increasing water depth and with distance from the shore. Significant changes occurred between the shelf and upper slope and below 2000 m depth. Meiobenthic abundance and biomass (ash free dry weight) followed the same general pattern, but changes were found below 400 and 800 m depth. In the depth range of 1200 to 3000 m values differ only slightly. Meiofauna abundance and biomass show a good correlation with the sedimentary chloroplastic pigment concentrations. Respiratory activity of sediment cores, measured by a shipboard technique at ambient temperatures, decreased with water depth and shows a good correlation with the pigment concentrations. ETS activity was highest on the shelf and decreased with water depth, with significant changes between 200 and 400 m, and below 1200 m depth, respectively. Activity was generally highest in the top 5 cm of the sediment and was measurable, at all stations, down to 15 cm sediment depth. Shelf and upper slope stations exhibited a vertical distribution pattern of ETS activity in the sediment column, different from that of deeper stations. The importance of biological activity measurements as an estimate of productivity is discussed. To prove the thesis that differences in benthic abundance, biomass and activity reflect differences in pelagic surface primary production, in the case of the NW-African coast caused by different upwelling intensities, the values from 35° N were compared with data from 21° N (permanent upwelling activity) and 17° N (ca. 9 months upwelling per year). On the shelf and upper slope (< 500 m) hydrographical conditions (currents, internal waves) influence the deposition of organic matter and cause a biomass minimum between 200 and 400 m depth in some regions. But, in general, macrobenthic abundance and biomass increases with enhanced upwelling activity and reaches a maximum in the area off Cape Blanc (21° N). On the shelf and in the shelf break region meiofauna densities are higher at 35° N in comparison to 21° N; but in contrast to the decreasing meiofauna abundance with increasing water depth at 35° N, an abundance maximum between 400 and 1200 m depth is formed in the Cape Blanc region; this maximum coincides with the maximum of sedimentary chloroplastic pigment equivalents. The comparison of ETS activities between 35° N and 21° N shows on the shelf activity at 21° N is up to 14 times higher and on the slope 4-9 times higher, which demonstrates that benthic activity responds to the surface productivity regime.

Optimising power take-off of an oscillating wave surge converter using high fidelity numerical simulations

Oscillating wave surge converters are a promising technology to harvest ocean wave energy in the near shore region. Although research has been going on for many years, the characteristics of the wave action on the structure and especially the phase relation between the driving force and wave quantities like velocity or surface elevation have not been investigated in detail. The main reason for this is the lack of suitable methods. Experimental investigations using tank tests do not give direct access to overall hydrodynamic loads, only damping torque of a power take off system can be measured directly. Non-linear computational fluid dynamics methods have only recently been applied in the research of this type of devices. This paper presents a new metric named wave torque, which is the total hydrodynamic torque minus the still water pitch stiffness at any given angle of rotation. Changes in characteristics of that metric over a wave cycle and for different power take off settings are investigated using computational fluid dynamics methods. Firstly, it is shown that linearised methods cannot predict optimum damping in typical operating states of OWSCs. We then present phase relationships between main kinetic parameters for different damping levels. Although the flap seems to operate close to resonance, as predicted by linear theory, no obvious condition defining optimum damping is found.

Vertical distribution of benthic invertebrate larvae during an upwelling event along a transect off the tropical Brazilian continental margin

Abundance and composition of marine benthic communities have been relatively well studied in the SE Brazilian coast, but little is known on patterns controlling the distribution of their planktonic larval stages. A survey of larval abundance in the continental margin, using a Multi-Plankton Sampler, was conducted in a cross-shelf transect off Cabo Frio (23 degrees S and 42 degrees W) during a costal upwelling event. Hydrographic conditions were monitored through discrete CDT casts. Chlorophyll-a in the top 100 m of the water column was determined and changes in surface chlorophyll-a was estimated using SeaWiFS images. Based on the larval abundances and the meso-scale hydrodynamics scenario, our results suggest two different processes affecting larval distributions. High larval densities were found nearshore due to the upwelling event associated with high chlorophyll a and strong along shore current. on the continental slope, high larval abundance was associated with a clockwise rotating meander, which may have entrapped larvae from a region located further north (Cabo de Sao Tome, 22 degrees S and 41 degrees W). In mid-shelf areas, our data suggests that vertical migration may likely occur as a response to avoid offshore transport by upwelling plumes and/or cyclonic meanders. The hydrodynamic scenario observed in the study area has two distinct yet extremely important consequences: larval retention on food-rich upwelling areas and the broadening of the tropical domain to southernmost subtropical areas. (C) 2009 Elsevier B.V. All rights reserved.

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.