Étude clinique randomisée prospective du taux de survie d'un fil lingual mandibulaire de rétention utilisant les méthodes de collage direct et indirect à court et moyen termes

Introduction : Après un traitement orthodontique, la rétention (ou contention) est essentielle pour éviter les récidives vers la malocclusion initiale. Le fil de rétention lingual est un appareil fixe, relativement facile à installer et bien accepté par les patients pour maintenir la position finale des dents antérieures inférieures. Étant de plus en plus utilisé, il devient important de s’assurer de sa fiabilité pour la stabilité de l’alignement dentaire. Objectif : Le but de cette étude clinique randomisée prospective est de déterminer le taux de survie d’un fil lingual mandibulaire de rétention en comparant les méthodes de collage direct et de collage indirect à court et moyen termes. Méthodologie : L’échantillon est constitué de 117 patients consécutifs aléatoirement distribués dans 2 groupes : collage direct (n=58) et collage indirect (n=59). Les fils torsadés de diamètre 0,0175’’ sont préformés par un technicien de laboratoire soit selon la méthode de collage direct, soit selon la méthode de collage indirect. Une matrice de transfert en silicone assure le positionnement précis du fil lingual en bouche. Assure® et Filtek™ Flow ont été utilisés pour le collage direct. Filtek™ Flow, Assure®, and Sondhi™ ont été utilisés pour le collage indirect. Les fils de rétention ont été évalués pour le décollement, l’infiltration, la distorsion et le bris à 2 mois (T1) et 6 mois (T2). Résultats : À T1, le taux de survie du fil de rétention est de 90,2% pour le groupe de collage direct, comparativement à 79,5% pour le groupe de collage indirect (p=0,232). À T2, le fil est resté intact pour 74,1% des participants dans le groupe de collage direct et pour 70,0% des participants dans le groupe de collage indirect (p=0,481). Les différences ne sont pas statistiquement significatives entre les 2 groupes. La fréquence du décollement est plus haute que les autres problèmes enregistrés à T1 (p<0,022), représentant 85,7% des échecs. À T2, le décollement est plus fréquent que la distorsion ou le bris (p<0,04), mais pas statistiquement plus fréquent que l’infiltration (p=0,109). Il représente alors 86,4% des échecs. Conclusion : Le décollement est la principale cause d’échec d’un fil de rétention lingual. Il n’y a pas de différence statistiquement significative du taux de survie d’un fil lingual mandibulaire de rétention entre les techniques de collage direct et de collage indirect à court et moyen termes.

Organische Mikro- und Nanodrähte auf Basis von Perylendiimiden

Diese Arbeit thematisiert die optimierte Darstellung von organischen Mikro- und Nanodrähten, Untersuchungen bezüglich deren molekularen Aufbaus und die anwendungsorientierte Charakterisierung der Eigenschaften. Mikro- und Nanodrähte haben in den letzten Jahren im Zuge der Miniaturisierung von Technologien an weitreichendem Interesse gewonnen. Solche eindimensionalen Strukturen, deren Durchmesser im Bereich weniger zehn Nanometer bis zu einigen wenigen Mikrometern liegt, sind Gegenstand intensiver Forschung. Neben anorganischen Ausgangssubstanzen zur Erzeugung von Mikro- und Nanodrähten haben organische Funktionsmaterialien aufgrund ihrer einfachen und kostengünstigen Verarbeitbarkeit sowie ihrer interessanten elektrischen und optischen Eigenschaften an Bedeutung gewonnen. Eine wichtige Materialklasse ist in diesem Zusammenhang die Verbindungsklasse der n-halbleitenden Perylentetracarbonsäurediimide (kurz Perylendiimide). Dem erfolgreichen Einsatz von eindimensionalen Strukturen als miniaturisierte Bausteine geht die optimierte und kontrollierte Herstellung voraus. Im Rahmen der Doktorarbeit wurde die neue Methode der Drahterzeugung „Trocknen unter Lösungsmittelatmosphäre“ entwickelt, welche auf Selbstassemblierung der Substanzmoleküle aus Lösung basiert und unter dem Einfluss von Lösungsmitteldampf direkt auf einem vorgegebenen Substrat stattfindet. Im Gegensatz zu literaturbekannten Methoden ist kein Transfer der Drähte aus einem Reaktionsgefäß nötig und damit verbundene Beschädigungen der Strukturen werden vermieden. Während herkömmliche Methoden in einer unkontrolliert großen Menge von ineinander verwundenen Drähten resultieren, erlaubt die substratbasierte Technik die Bildung voneinander separierter Einzelfasern und somit beispielsweise den Einsatz in Einzelstrukturbauteilen. Die erhaltenen Fasern sind morphologisch sehr gleichmäßig und weisen bei Längen von bis zu 5 mm bemerkenswert hohe Aspektverhältnisse von über 10000 auf. Darüber hinaus kann durch das direkte Drahtwachstum auf dem Substrat über den Einsatz von vorstrukturierten Oberflächen und Wachstumsmasken gerichtetes, lokal beschränktes Drahtwachstum erzielt werden und damit aktive Kontrolle auf Richtung und Wachstumsbereich der makroskopisch nicht handhabbaren Objekte ausgeübt werden. Um das Drahtwachstum auch hinsichtlich der Materialauswahl, d. h. der eingesetzten Ausgangsmaterialien zur Drahterzeugung und somit der resultierenden Eigenschaften der gebildeten Strukturen aktiv kontrollieren zu können, wird der Einfluss unterschiedlicher Parameter auf die Morphologie der Selbstassemblierungsprodukte am Beispiel unterschiedlicher Derivate betrachtet. So stellt sich zum einen die Art der eingesetzten Lösungsmittel in flüssiger und gasförmiger Phase beim Trocknen unter Lösungsmittelatmosphäre als wichtiger Faktor heraus. Beide Lösungsmittel dienen als Interaktionspartner für die Moleküle des funktionellen Drahtmaterials im Selbstassemblierungsprozess. Spezifische Wechselwirkungen zwischen Perylendiimid-Molekülen untereinander und mit Lösungsmittel-Molekülen bestimmen dabei die äußere Form der erhaltenen Strukturen. Ein weiterer wichtiger Faktor ist die Molekülstruktur des verwendeten funktionellen Perylendiimids. Es wird der Einfluss einer Bay-Substitution bzw. einer unsymmetrischen Imid-Substitution auf die Morphologie der erhaltenen Strukturen herausgestellt. Für das detaillierte Verständnis des Zusammenhanges zwischen Molekülstruktur und nötigen Wachstumsbedingungen für die Bildung von eindimensionalen Strukturen zum einen, aber auch die resultierenden Eigenschaften der erhaltenen Aggregationsprodukte zum anderen, sind Informationen über den molekularen Aufbau von großer Bedeutung. Im Rahmen der Doktorarbeit konnte ein molekular hoch geordneter, kristalliner Aufbau der Drähte nachgewiesen werden. Durch Kombination unterschiedlicher Messmethoden ist es gelungen, die molekulare Anordnung in Strukturen aus einem Spirobifluoren-substituierten Derivat in Form einer verkippten Molekülstapelung entlang der Drahtlängsrichtung zu bestimmen. Um mögliche Anwendungsbereiche der erzeugten Drähte aufzuzeigen, wurden diese hinsichtlich ihrer elektrischen und optischen Eigenschaften analysiert. Neben dem potentiellen Einsatz im Bereich von Filteranwendungen und Sensoren, sind vor allem die halbleitenden und optisch wellenleitenden Eigenschaften hervorzuheben. Es konnten organische Transistoren auf der Basis von Einzeldrähten mit im Vergleich zu Dünnschichtbauteilen erhöhten Ladungsträgerbeweglichkeiten präpariert werden. Darüber hinaus wurden die erzeugten eindimensionalen Strukturen als aktive optische Wellenleiter charakterisiert. Die im Rahmen der Dissertation erarbeiteten Kenntnisse bezüglich der Bildung von eindimensionalen Strukturen durch Selbstassemblierung, des Drahtaufbaus und erster anwendungsorientierter Charakterisierung stellen eine Basis zur Weiterentwicklung solcher miniaturisierter Bausteine für unterschiedlichste Anwendungen dar. Die neu entwickelte Methode des Trocknens unter Lösungsmittelatmosphäre ist nicht auf den Einsatz von Perylendiimiden beschränkt, sondern kann auf andere Substanzklassen ausgeweitet werden. Dies eröffnet breite Möglichkeiten der Materialauswahl und somit der Einsatzmöglichkeiten der erhaltenen Strukturen.

Análisis de la incidencia de la ACDI y de la red ECPAT internacional sobre la erradicación de la explotación sexual infantil en niños, niñas y adolescentes en el contexto del turismo, proyecto “La Muralla soy yo” (2009-2011), Cartagena de indias

La Explotación Comercial sexual de los niños, niñas y adolescentes – ESCNNA ha ocasionado graves repercusiones en la sociedad, sometiendo a los menores a situaciones que atentan contra su integridad física y psicológica. Por ello, en el marco internacional y nacional se han adelantado diferentes iniciativas para erradicar dicho fenómeno. La Cooperación Internacional para el desarrollo- CI ha sido una valiosa herramienta en el tratamiento del flagelo dados los diferentes canales de ayuda los cuales han contribuido para su intervención. En este sentido, la CI por medio de la Agencia Canadiense para el desarrollo internacional- ACDI y la Fundación Renacer- ECPAT Internacional (End Child Prostitution, Pornography & Trafficking of Children for Sexual Purposes) hicieron posible junto con otros actores el proyecto de CI en Cartagena llamado: “La Muralla soy yo”, el cual buscó la prevención y futura erradicación de la Explotación Sexual de niños y adolescentes en el turismo- ESNAT en la ciudad. En el presente estudio de caso se pretende identificar cómo la CI incide por medio de la ACDI y la red ECPAT Internacional en instituciones locales de Cartagena para la prevención y posible erradicación del problema de la Explotación comercial sexual infantil en niños, niñas y adolescentes, en el contexto del turismo.

Induktiv provning av ferritiskt rostfritt stå

The report examines the factors which may be a contributing cause to the problems that are present when ferritic stainless steel are eddy current tested in a warm condition. The work is carried out at Fagersta Stainless AB in Fagersta which manufactures stainless steel wire. In the rolling mill there is an eddy current equipment for detection of surface defects on the wire. The ferritic stainless steels cause a noise when testing and this noise complicates the detection of defects.Because of this, a study was made of how the noise related to factors such as steel grade, temperature, size and velocity. By observing the signal and with the possibilities to change the equipment settings the capability to let a signal filter reduce the noise level were evaluated. Theories about the material's physical properties have also been included, mainly the magnetic properties, electrical conductivity and the material's tendency to oxidize.Results from the tests show that a number of factors do not affect the inductive test significantly and to use a filter to reduce the noise level does not seem to be a viable option. The level of noise does not relate to the presence of superficial particles in form of oxides.The ferritic stainless steels showed some difference in noise level. Which noise level there was did match well with the steels probability for a precipitation of a second phase, and precipitation of austenite may in this case contribute to noise when using an eddy current instrument.The noise is probably due to some physical material property that varies within the thread.

Evolution of artificial defects during shape rolling

Very often defects are present in rolled products. For wire rods, defects are very deleterious since the wire rods are generally used directly in various applications. For this reason, the market nowadays requires wire rods to be completely defect-free. Any wire with defects must be rejected as scrap which is very costly for the production mill. Thus, it is very important to study the formation and evolution of defects during wire rod rolling in order to better understand and minimize the problem, at the same time improving quality of the wire rods and reducing production costs. The present work is focused on the evolution of artificial defects during rolling. Longitudinal surface defects are studied during shape rolling of an AISI M2 high speed steel and a longitudinal central inner defect is studied in an AISI 304L austenitic stainless steel during ultra-high-speed wire rod rolling. Experimental studies are carried out by rolling short rods prepared with arteficial defects. The evolution of the defects is characterised and compared to numerical analyses. The comparison shows that surface defects generally reduce quicker in the experiments than predicted by the simulations whereas a good agreement is generally obtained for the central defect.

Tribology in Metal Working

This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions in the process. Consequently, the surface finish as well as the dimensions of the formed product may change and in the end, the product will not fulfil the requirements of the customer. Therefore, research and development in regard to wear, and consequently tribology, of the forming tools is of great interest. The investigations of wire drawing dies focus on coating adhesion/cohesion, surface characteristics and material transfer onto the coated steel both in laboratory scale as well as in the wire drawing process. Results show that it in wire drawing is possible to enhance the tribological performance of drawing dies by using a lubricant together with a steel substrate coated by a polished, dual-layer coating containing both hard and friction-lowering layers. The investigations of hot rolling work rolls focus on microstructure and hardness as well as cracking- and surface characteristics in both laboratory scale and in the hot strip mill. Results show that an ideal hot work roll material should be made up of a matrix with high hardness and a large amount of complex, hard carbides evenly distributed in the microstructure. The surface failure mechanisms of work rolls are very complex involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. This knowledge may be used to develop new tools with higher wear resistance giving better performance, lower costs and lower environmental impact.

Melhorias em arranjos produtivos locais: lições de dois casos nordestinos

The research contemplates the dilemma faced by small rural communities producers¿ in north-eastern Brazil maintaining last longing relationships. Due to difficult social conditions in distant regions, small producers utilize practices of commercial exclusivity to obtain sustainability. In the Lago do Junco community case, located in the state of Maranhão, the babaçu oil exports¿, the social environmental appeal guarantee the cluster participants sustainability and the representation of women in society. But social problems related to the lack of formal education e the absence of relationship with local aid organizations causes the non compliance with market demands, leading the cluster to a non-innovative trap. In the honey community case in Simplício Mendes, located in the state of Piauí, the closest relationship with the external aid agents increased the conversion of market demands in reality. The analysis reveal possibilities on obtaining economic sustainability for small producers thru the conscientious utilization of nature resources guaranteeing the harmony between the environmental preservation and the development of both activities, apiculture in Piauí and babaçu oil processing in Maranhão.

Estimando a taxa de juros real neutra brasileira via modelo DSGE

Este trabalho objetiva estimar uma série trimestral para a taxa de juros real neutra brasileira via modelo de Equilíbrio Geral Dinâmico Estocástico (DSGE), para o período compreendido entre o primeiro trimestre de 2000 e o último de 2011. O modelo representa uma economia fechada, com famílias maximizando utilidade do tipo CRRA, firmas maximizando lucro em um mercado de concorrência imperfeita e um governo com política fiscal de orçamento equilibrado e regra de política monetária à la Taylor, em um contexto de rigidez de preços. Neste arcabouço, a taxa de juros real neutra foi calculada com base nos choques de produtividade e de gastos de governo, que foram considerados os mais relevantes para a economia brasileira. Adicionalmente, analisou-se o impacto dos choques de produtividade e gastos do governo sobre a taxa neutra, assim como seu comportamento ao longo do período estimado e sua sensibilidade a calibragens alternativas. Por fim, ao comparar o comportamento do hiato de taxa de juros vis-à-vis à inflação, encontramos correlações negativas de 56% e 83% para todo o período estimado e para uma amostra mais recente (do primeiro trimestre de 2006 até o último de 2011), respectivamente, indicando certa consistência na série obtida.

Processo decisório em contabilidade sob efeito da vaguidade.

O modelo racional de decisão tem sido objeto de estudo constante na academia de vários países, contribuindo para evolução do ser racional como importante tomador de decisão. A evolução destes estudos tem aberto questionamentos quanto à capacidade de racionalidade que temos como tomadores de decisão, deleitando assim em várias teorias novas que pesquisam estas limitações no decidir. Especialmente aplicadas a teorias econômicas, estudos como Inteligência Artificial, Contabilidade Mental, Teoria dos Prospectos, Teoria dos Jogos entre outras se destacam neste cenário de estudo das finanças comportamentais. A contabilidade como ferramenta de apoio as decisões financeiras ocupa posição de destaque. Esta tem em seu escopo de trabalho normas (aquilo que deveria ser feito) que regulam sua atuação, em alguns casos esta regulamentação não é precisa em suas especificações, deixando janelas que levam seus profissionais a erros de interpretação. A imprecisão contábil pode causar viés em suas classificações. Os profissionais, deparados com este legado podem se utilizar de heurísticas para interpretar da melhor maneira possível os acontecimentos que são registrados na contabilidade. Este trabalho tem a intenção de análise de alguns pontos que consideramos importantes quando temos imprecisão contábil, respondendo as seguintes perguntas: a imprecisão de normas contábeis causa viés na decisão? O profissional que se depara com imprecisão contábil se utiliza de Heurística para decidir? Quais os erros mais comuns de interpretação sob incerteza contábil? Para que o assunto fosse abordado com imparcialidade de maneira a absorver retamente quais são as experiências dos profissionais que atuam na área contábil, foi elaborado um questionário composto por uma situação possível que leva o respondente a um ambiente de tomada de decisões que envolva a prática contábil. O questionário era dividido em duas partes principais, com a preocupação de identificar através das respostas se existe imprecisão contábil (sob a luz do princípio da prudência) e quais heurísticas que os respondentes se utilizam com mais freqüência, sendo o mesmo aplicado em profissionais que atuam na área contábil e que detenham experiências profissionais relacionadas à elaboração, auditoria ou análise de demonstrações contábeis. O questionário aplicado na massa respondente determinou, através das respostas, que existe, segundo os profissionais, interpretações diferentes para os mesmos dados, caracterizando assim zona cinzenta, segundo Penno (2008), ou seja, interpretações que podem ser mais agressivas ou mais conservadoras conforme a interpretação do profissional. Já quanto às estratégias simplificadoras, ou heurísticas, que causam algum tipo de enviesamento no processo decisório, alguns foram identificadas como: associações pressupostas, interpretação errada da chance, regressão a media e eventos disjuntivos e eventos conjuntivos, que reforçam a pesquisa dando indícios de que os respondentes podem estar tomando decisões enviesadas. Porém, não se identificou no estudo tomada de decisões com enviesamentos como recuperabilidade e insensibilidades ao tamanho da amostra. Ao final do estudo concluímos que os respondentes têm interpretações diferenciadas sobre o mesmo assunto, mesmo sob a luz do princípio contábil da prudência, e ainda se utilizam de estratégias simplificadoras para resolverem assuntos quotidianos.

Uma análise exploratória da indústria de serviços PWLAN Wi-Fi no Brasil: em busca de uma vantagem competitiva sustentável

As telecomunicações no mundo têm avançado a passos largos na oferta de novas tecnologias e padrões que viabilizam e flexibilizam a transmissão / recepção de informações entre pessoas e a Internet. Em especial, no que tange à ubiqüidade, o uso de dispositivos de comunicações móveis sem fio, como telefones celulares e PDAs (Personnal Digital Assistant), tem permitido às empresas alcançarem seus clientes a qualquer hora e em qualquer lugar. Muitos padrões de comunicação wireless têm surgido, inicialmente na indústria de telefonia móvel celular e, em seguida, na indústria de computadores e PDAs, habilitando a comunicação wireless de dados em banda larga e o comércio eletrônico móvel (m-commerce). Em especial, o padrão Wi-Fi tem sido difundido mundialmente através da expansão de redes públicas sem fio (PWLANs). Assim, os fabricantes de equipamentos de telecomunicações, as empresas operadoras de serviços de telefonia fixa e móvel e até provedores de acesso à Internet têm manifestado grande interesse nessa área por perceberem novas oportunidades de aumento de receita através da tecnologia Wi-Fi. Todos estes aspectos da recente história do Wi-Fi têm gerado questionamentos quanto a seu futuro sucesso e real geração de vantagem competitiva sustentável, não obstante o volume de negócios relativos a esta tecnologia estar em franco crescimento. Este trabalho propõe-se a analisar o mercado de serviços PWLAN Wi-Fi brasileiro, identificando os principais atores e os modelos de negócio praticados por eles, comparando esses modelos aos modelos identificados por Shubar e Lechner. O estudo propõe-se, também, a avaliar tais empresas e seus respectivos modelos de negócio segundo o framework VRIO desenvolvido por Barney com base na visão estratégica baseada em recursos (RBV- Resource Based View).

Administração da implementação dos recursos de informática

A tese identifica as dimensões essenciais da administração da implementação dos recursos de Informática, cria estruturas de referência que capturam estas dimensões e analisa este processo multidimensional e contingencial utilizando como exemplo de TI-Tecnologia de Informação a microinformática. Neste sentido, desenvolve e quantifica uma série de índices para o planejamento e controle da implementação do método proposto, através da análise de casos reais e de uma pesquisa.

Estudo do perfil térmico de fornos do tipo "caipira" utilizados pelo setor de cerâmica vermelha em parelhas na região Seridó-RN

The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace

Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P

To obtain a process stability and a quality weld bead it is necessary an adequate parameters set: base current and time, pulse current and pulse time, because these influence the mode of metal transfer and the weld quality in the MIG-P, sometimes requiring special sources with synergistic modes with external control for this stability. This work aims to analyze and compare the effects of pulse parameters and droplet size in arc stability in MIG-P, four packets of pulse parameters were analysed: Ip = 160 A, tp = 5.7 ms; Ip = 300 A and tp = 2 ms, Ip = 350 A, tp = 1.2 ms and Ip = 350 A, tp = 0.8 ms. Each was analyzed with three different drop diameters: drop with the same diameter of the wire electrode; droplet diameter larger drop smaller than the diameter of the wire electrode. For purposes of comparison the same was determined relation between the average current and welding speed was determined generating a constant (Im / Vs = K) for all parameters. Welding in flat plate by simple deposition for the MIG-P with a distance beak contact number (DBCP) constant was perfomed subsequently making up welding in flat plate by simple deposition with an inclination of 10 degrees to vary the DBCP, where by assessment on how the MIG-P behaved in such a situation was possible, in addition to evaluating the MIG-P with adaptive control, in order to maintain a constant arc stability. Also high speed recording synchronized with acquiring current x voltage (oscillogram) was executed for better interpretation of the transfer mechanism and better evaluation in regard to the study of the stability of the process. It is concluded that parameters 3 and 4 exhibited greater versatility; diameters drop equal to or slightly less than the diameter of the wire exhibited better stability due to their higher frequency of detachment, and the detachment of the drop base does not harm the maintenance the height of the arc

Radiografia digital para inspeção de soldas de dutos - melhor sensibilidade

The conventional radiographic technique using industrial radiographic films is with the days finishing. The Digital Radiography is taking place in several sectors, e.g., the medical, aerospace, security, automotive, etc. In addition to representing a technological trend, it has been demonstrated that digital radiography offers a series of benefits in terms of productivity, sensitivity, environmental aspects, image treatment tools, cost reduction, etc. If one weld seam to be inspected is from a serried product, as example a pipe, the best option to be implemented is the Flat Panel Detector with this equipment is possible to reduce the obtaining digital radiographic images in place of films and reducing the inspection cycle time due to its high degree of automation. In the experiments described in this paper this new technique was tested and the results were compared with those obtained by the conventional radiography. The welded specimens were prepared using the submerged-arc welding process and small artificial cracks of the most varied dimensions, present in the specimens, were used to establish a comparison of the sensitivities presented by the techniques employed After conducting several experiments, the digital method presented the highest sensitivity to the wire-type Image Quality Indicator (IQI) and in the detection of small defects, leading to the conclusion that the use of digital radiography using the flat-panel detector offers advantages over the conventional technique [1, 2]. This work was carried out based on the API 5L Edition 2004 [3] and ISO 3183 Edition 2007 [4] specifications.

Debris, Roughness and Friction of Stainless Steel Archwires Following Clinical Use

Objective: To investigate the degree of debris, roughness, and friction of stainless steel orthodontic archwires before and after clinical use.Materials and Methods: For eight individuals, two sets of three brackets (n = 16) each were bonded from the first molar to the first premolar. A passive segment of 0.019- x 0.025-inch stainless steel archwire was inserted into the brackets and tied by elastomeric ligature. Debris level (via scanning electron microscopy), roughness, and frictional force were evaluated as-received and after 8 weeks of intraoral exposure. Mann-Whitney, Wilcoxon signed-rank, and Spearman correlation tests were used for statistical analysis at the .05 level of significance.Results: There were significant increases in the level of debris (P = .0004), roughness of orthodontic wires (P = .002), and friction (P = .0001) after intraoral exposure. Significant positive correlations (P < .05) were observed between these three variables.Conclusion: Stainless steel rectangular wires, when exposed to the intraoral environment for 8 weeks, showed a significant increase in the degree of debris and surface roughness, causing an increase in friction between the wire and bracket during the mechanics of sliding. (Angle Orthod. 2010;80:521-527.)