A self-timed multipurpose delay sensor for field programmable gate arrays (FPGAs)

This paper presents a novel self-timed multi-purpose sensor especially conceived for Field Programmable Gate Arrays (FPGAs). The aim of the sensor is to measure performance variations during the life-cycle of the device, such as process variability, critical path timing and temperature variations. The proposed topology, through the use of both combinational and sequential FPGA elements, amplifies the time of a signal traversing a delay chain to produce a pulse whose width is the sensor’s measurement. The sensor is fully self-timed, avoiding the need for clock distribution networks and eliminating the limitations imposed by the system clock. One single off- or on-chip time-to-digital converter is able to perform digitization of several sensors in a single operation. These features allow for a simplified approach for designers wanting to intertwine a multi-purpose sensor network with their application logic. Employed as a temperature sensor, it has been measured to have an error of ±0.67 °C, over the range of 20–100 °C, employing 20 logic elements with a 2-point calibration.

Engineering Computational Emotion - A Reference Model for Emotion in Artificial Systems

Emotion is generally argued to be an influence on the behavior of life systems, largely concerning flexibility and adaptivity. The way in which life systems acts in response to a particular situations of the environment, has revealed the decisive and crucial importance of this feature in the success of behaviors. And this source of inspiration has influenced the way of thinking artificial systems. During the last decades, artificial systems have undergone such an evolution that each day more are integrated in our daily life. They have become greater in complexity, and the subsequent effects are related to an increased demand of systems that ensure resilience, robustness, availability, security or safety among others. All of them questions that raise quite a fundamental challenges in control design. This thesis has been developed under the framework of the Autonomous System project, a.k.a the ASys-Project. Short-term objectives of immediate application are focused on to design improved systems, and the approaching of intelligence in control strategies. Besides this, long-term objectives underlying ASys-Project concentrate on high order capabilities such as cognition, awareness and autonomy. This thesis is placed within the general fields of Engineery and Emotion science, and provides a theoretical foundation for engineering and designing computational emotion for artificial systems. The starting question that has grounded this thesis aims the problem of emotion--based autonomy. And how to feedback systems with valuable meaning has conformed the general objective. Both the starting question and the general objective, have underlaid the study of emotion, the influence on systems behavior, the key foundations that justify this feature in life systems, how emotion is integrated within the normal operation, and how this entire problem of emotion can be explained in artificial systems. By assuming essential differences concerning structure, purpose and operation between life and artificial systems, the essential motivation has been the exploration of what emotion solves in nature to afterwards analyze analogies for man--made systems. This work provides a reference model in which a collection of entities, relationships, models, functions and informational artifacts, are all interacting to provide the system with non-explicit knowledge under the form of emotion-like relevances. This solution aims to provide a reference model under which to design solutions for emotional operation, but related to the real needs of artificial systems. The proposal consists of a multi-purpose architecture that implement two broad modules in order to attend: (a) the range of processes related to the environment affectation, and (b) the range or processes related to the emotion perception-like and the higher levels of reasoning. This has required an intense and critical analysis beyond the state of the art around the most relevant theories of emotion and technical systems, in order to obtain the required support for those foundations that sustain each model. The problem has been interpreted and is described on the basis of AGSys, an agent assumed with the minimum rationality as to provide the capability to perform emotional assessment. AGSys is a conceptualization of a Model-based Cognitive agent that embodies an inner agent ESys, the responsible of performing the emotional operation inside of AGSys. The solution consists of multiple computational modules working federated, and aimed at conforming a mutual feedback loop between AGSys and ESys. Throughout this solution, the environment and the effects that might influence over the system are described as different problems. While AGSys operates as a common system within the external environment, ESys is designed to operate within a conceptualized inner environment. And this inner environment is built on the basis of those relevances that might occur inside of AGSys in the interaction with the external environment. This allows for a high-quality separate reasoning concerning mission goals defined in AGSys, and emotional goals defined in ESys. This way, it is provided a possible path for high-level reasoning under the influence of goals congruence. High-level reasoning model uses knowledge about emotional goals stability, letting this way new directions in which mission goals might be assessed under the situational state of this stability. This high-level reasoning is grounded by the work of MEP, a model of emotion perception that is thought as an analogy of a well-known theory in emotion science. The work of this model is described under the operation of a recursive-like process labeled as R-Loop, together with a system of emotional goals that are assumed as individual agents. This way, AGSys integrates knowledge that concerns the relation between a perceived object, and the effect which this perception induces on the situational state of the emotional goals. This knowledge enables a high-order system of information that provides the sustain for a high-level reasoning. The extent to which this reasoning might be approached is just delineated and assumed as future work. This thesis has been studied beyond a long range of fields of knowledge. This knowledge can be structured into two main objectives: (a) the fields of psychology, cognitive science, neurology and biological sciences in order to obtain understanding concerning the problem of the emotional phenomena, and (b) a large amount of computer science branches such as Autonomic Computing (AC), Self-adaptive software, Self-X systems, Model Integrated Computing (MIC) or the paradigm of models@runtime among others, in order to obtain knowledge about tools for designing each part of the solution. The final approach has been mainly performed on the basis of the entire acquired knowledge, and described under the fields of Artificial Intelligence, Model-Based Systems (MBS), and additional mathematical formalizations to provide punctual understanding in those cases that it has been required. This approach describes a reference model to feedback systems with valuable meaning, allowing for reasoning with regard to (a) the relationship between the environment and the relevance of the effects on the system, and (b) dynamical evaluations concerning the inner situational state of the system as a result of those effects. And this reasoning provides a framework of distinguishable states of AGSys derived from its own circumstances, that can be assumed as artificial emotion.

Lo intermedio como lugar : lo intersticial, lo fronterizo y lo impreciso en la arquitectura contemporánea

1. Nuestra investigación se centra en el estudio de los “ámbitos o espacios intermedios” en momentos de la arquitectura contemporánea, en un período de transición entre finales de los años 80 y nuestros días. Pretendemos analizar cómo se presenta el ámbito intermedio en el objeto o lugar arquitectónico y su función o relación con el entorno cercano, desde el proyecto hasta su repercusión en la experiencia vivida. 2. El concepto de intermedio entendido como ámbito o espacio intersticial, fronterizo y ambivalente (o multivalente), atraviesa en la presente investigación el campo de la etimología, de la ciencia, del pensamiento y del arte, para detenerse en la arquitectura actual, llevándose a cabo una indagación concreta en el proceso de concepción, en la propuesta formal, espacial y funcional, así como en la percepción y demás experiencias o vivencias en el lugar arquitectónico. 3. En primer lugar nos proponemos estudiar y explorar el concepto de “intermedio” en sus características, funciones y ubicaciones dentro de la cultura contemporánea, detectando sus antecedentes culturales más importantes, para a continuación aplicarlo reflexivamente a obras significativas de arquitectura. La investigación se enfoca en la modalidad figural (imprecisa) de lo intermedio (en alusión al “figural” deleuziano), cuyas metáforas base son lo translúcido, la penumbra y la espuma, vinculadas al actual paradigma cultural de la complejidad (C. Jencks). A continuación se analizan las relaciones o implicaciones de dicha modalidad figural en obras de arquitectos como Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel y Bos, y Siza, comprobando su valor operativo y poniendo de manifiesto su sentido e importancia en la actualidad y en la disciplina. El estudio tiene como trasfondo el concepto de in-between de la obra de Eisenman, y utiliza conceptos de la filosofía del límite de Trías como algunos de sus principales fundamentos. 4. En cada una de las obras de arquitectura presentadas esta modalidad imprecisa se traduce en un ámbito o espacio intermedio figural específico. Son obras en las que real y virtual, matricial y objetual, arquitectura y territorio, existente y nuevo, colectivo e individual, social e íntimo, interior y exterior, y demás usos y funciones se entrelazan o funden. Son arquitecturas cuya geometría ya no se encuentra tan determinada por aspectos bi o tridimensionales del dibujo o de la construcción. A través de la manipulación de estas geometrías más o menos complejas, dinámicas e intersticiales, estas obras reflejan (o intuyen) las premisas del actual Zeitgeist: un cambio de esquemas de objetos a relaciones basado en un pensamiento más holístico, transdisciplinar, sistémico o complejo (E. Morin), y una nueva conciencia colectiva sobre la realidad que anuncia la crisis de la percepción, el cambio de paradigma y nuevos valores (F. Capra). Emerge otra forma de sentir y percibir el mundo, los lugares y los espacios, que poco a poco está cambiando el modo de pensar y dibujar la arquitectura, y consecuentemente de interaccionar con ella. 5. El sentido del espacio intermedio figural, emerge en las cada vez más complejas cualidades morfológico-espaciales y funcionales de una parte importante de la arquitectura actual. Arquitectura, geometría y tecnología informática están más entrelazadas que nunca, y de un modo más libre, para así poder indagar en nuevas formas de pensar y crear lugares en que los “espacios intermedios” que investigamos son un testimonio. El espacio arquitectónico se vuelve afectivo e interactivo, un lugar intermedio figural, formalizado por espacialidades intersticiales que parecen aludir a lo líquido, donde la forma es más matriz que configuración, el espacio más espacialidad que compartimiento, la función más versátil y multivalente que específica o autónoma, y la perplejidad, la imaginación y la evocación se entrecruzan y vuelven patentes. 6. La arquitectura de los lugares intermedios valora no solamente el “plano”, la “configuración” y la “transparencia”, sino sobre todo el “espacio” y la “relación” en sus interrelaciones con los usuarios y demás contextos. De la identidad a la relacionalidad, de la representación a la presentación, es una arquitectura que propone “otros espacios” que más que espacios son topografías y espacialidades intersticiales, de tensión, transición, transformación, relación, intercambio e interacción. Son lugares intermedios reales y virtuales, que se sirven tanto de la morfología como de la topología para conquistar nuevas espacialidades, pretendiendo salir de la estricta operación de “forming”/”morphing”/formación/”conformación” para explorar la de “spacing”/espaciamiento. Son lugares que se basan en conceptos como la zona de indiscernibilidad de Deleuze, la imagen- flujo de Buci-Glucksmann, la suspensión-entre de Sloterdijk, o el espacio no-objetivo al que se refiere José Gil, plasmándose en la arquitectura contemporánea como tropos de lo intersticial. 7. Son los lugares intermedios de la arquitectura actual, de espacialidad háptica, más “afectiva”, generativa e interactiva, donde ese ámbito intermedio transforma y es transformado, “afecta”, “con-mueve” (nos hace mover/accionar) y evoca otros lugares, otras posibilidades de espacio habitable u ocupable. Emerge lo intermedio como lugar, algo que anuncia y exhibe, de manera paradigmática y manifiesta, el monumento de Eisenman en Berlín. ABSTRACT 1. Our research focuses on the study of “in-between spaces or environments” at particular times in contemporary architecture, in a transition period from the end of the 1980’s through to today. We aim to analyse how in-between environments are presented in the architectural object or place and their function or their relationship with the nearby surroundings, from the project through to the experience had. 2. In this research, the in-between concept, understood as an interstitial, border and ambivalent (or multi-purpose) environment or space, is assessed from the viewpoint of etymology, science, thought and art, to conclude in current architecture, with specific exploration of the conception process, of the formal, spatial and functional proposal, together with the perception and other experiences in the architectural place. 3. Firstly, we aim to study and explore the “in-between” concept as regards its features, functions and locations within contemporary culture, revealing its most important cultural background, to then apply it reflexively to important works of architecture. The research focuses on the figural (imprecise) mode of in-between (in allusion to Deleuze’s “figural” approach) whose base metaphors are the translucent, semi-darkness and foam, linked to the current cultural paradigm of complexity (C. Jenks). We then go on to assess the relationships or implications of said figural mode in architectural works by Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel and Bos, and Siza, verifying their operational worth and revealing their meaning and importance today and in this discipline. The backdrop of the study is the in-between concept of Eisenman’s work and it also uses concepts from the philosophy of the limit of Trías as its main underpinnings. 4. In each of the architectural works presented, this imprecise mode is translated into a specific in-between environment or space. They are works in which real and virtual, matricial and objectual, architecture and territory, existing and new, collective and individual, social and intimate, interior and exterior and other uses and functions all intertwine or blend together. They are architectures the geometry of which is not so much determined by bi- or tri-dimensional aspects of the drawing or construction. Through the manipulation of these more or less complex, dynamic and interstitial geometries, these works reflect (or insinuate) the premises of the current Zeitgeist: A change in the scheme of objects to relationships towards a more holistic, transdisciplinary, systemic or complex thought (E. Morin), and a new collective conscience about the reality which announces the crisis of perception, the change in paradigm and new values (F. Capra). Another way of feeling and perceiving the world, places and spaces, which little by little is changing the way of thinking and drawing architecture and hence of interacting with it. 5. The meaning of figural in-between space emerges in the increasingly complex, morphological-spatial and functional qualities of a large part of architecture today. Architecture, geometry and computer technology are more than ever intertwined in a freer way to inquire into other ways of thinking and making places, where the “in-between” spaces we research are a testimony. Architectural space becomes affective and interactive, a figural in-between place, formed by interstitial spatiality which seems to allude to something liquid, where shape is more matrix than configuration, space more spatiality than compartment, its function more versatile and multi-purpose than specific or autonomous, and perplexity, imagination and evocation criss-cross each other, becoming obvious. 6. The architecture of in-between places values not only “flat”, “configuration” and “transparency”, but above all “space” and the “relationship” in its interrelations with users and other contexts. From identity to relationality, from representation to presentation, it is an architecture that proposes “other spaces”, which more than spaces are topographies and interstitial spatialities, of tension, transition, transformation, relation, exchange and interaction. They are real and virtual in-between places, that take in both morphology and topology to conquer new spatialities, aiming to depart from the strict “forming”/”morphing” operation in order to explore “spacing”. They are places that derive both from Deleuze’s indiscernibility zone concept, from Buci-Glucksmann´s image-flow concept, from Sloterdijk’s suspension-between, and from the non-objective space referred to by José Gil, and they are embodied in contemporary architecture as tropes of the interstitial. 7. They are the in-between places in architecture today, of haptic spatiality, more “affective”, generative and interactive, where that in-between environment transforms and is transformed, “affects”, “moves” (it makes us move/act) and evokes other places, other possibilities of habitable or occupiable space. The in-between emerges as a place, which paradigmatically and declaredly, Eisenman´s monument in Berlin announces and exhibits. RESUMO 1. A investigação centra-se no estudo dos “âmbitos ou espaços intermédios” em momentos da arquitectura contemporânea, no período de transição entre os finais dos anos 80 e os nossos dias. Pretende-se analisar como se apresenta o âmbito intermédio no objecto ou lugar arquitectónico e sua função ou relação com o meio envolvente, desde o projecto até à sua repercussão na experiencia vivenciada. 2. O conceito de intermédio entendido como âmbito ou espaço intersticial, fronteiriço e ambivalente (ou multivalente), atravessa na presente investigação o campo da etimologia, da ciência, do pensamento e da arte, para deter-se na arquitectura actual, realizando-se uma indagação concreta no processo de concepção, na proposta formal, espacial e funcional, assim como na percepção e demais experiencias ou vivencias no lugar arquitectónico. 3. Em primeiro lugar, explora-se o conceito de “intermédio” nas suas características, funções e concretizações na cultura contemporânea, detectando os seus antecedentes culturais mais importantes, para em seguida aplicá-lo reflexivamente a obras significativas de arquitectura. A investigação centra-se na modalidade figural (imprecisa) do intermédio (alusão ao figural deleuziano) cujas metáforas base são o translúcido, a penumbra e a espuma, relacionadas com o actual paradigma da complexidade (C. Jencks). Em seguida analisam-se as relações ou implicações da referida modalidade figural em obras de arquitectos como Eisenman, Holl, Tschumi, Ito, Fujimoto, Van Berkel e Bos, e Siza, como modo de comprovar o seu valor operativo e revelar o seu sentido e importância na actualidade e na disciplina. O estudo tem como referencia o conceito de in-between da obra de Eisenman, e utiliza conceitos da filosofia do limite de Trias como alguns dos seus principais fundamentos. 4. Em cada uma das obras de arquitectura apresentadas esta modalidade imprecisa traduz-se num âmbito ou espaço intermédia figural especifico. São obras nas quais real e virtual, matricial e objectual, arquitectura e território, existente e novo, colectivo e individual, social e intimo, interior e exterior, e outros usos e funções se entrelaçam ou fundem. São arquitecturas cuja geometria já não está tão determinada por aspectos bi ou tridimensionais do desenho ou da construção. Através do uso destas geometrias mais ou menos complexas, dinâmicas e intersticiais, estas obras reflectem (ou intuem) as premissas do actual zeitgeist: uma mudança de esquemas de objectos a relações para um pensamento mais holístico, transdisciplinar, sistémico ou complexo (E. Morin) e uma nova consciência colectiva sobre a realidade, que anuncia a crise da percepção, a mudança de paradigma e novos valores (F. Capra). Emerge uma outra forma de sentir e perceber o mundo, os lugares e os espaços, que gradualmente vai alterando o modo de pensar e desenhar a arquitectura, e consequentemente de interagir com ela. 5. O sentido do espaço intermédio figural, emerge nas cada vez mais complexas qualidades morfológico-espaciais e funcionais de uma parte importante da arquitectura actual. Cada vez mais, arquitectura, geometria e tecnologia informática, relacionam-se de um modo mais livre para indagar outras formas de pensar e fazer lugares, onde os espaços intermédios que investigamos são um testemunho. O espaço arquitectónico torna-se afectivo e interactivo, um lugar intermédio figural, formalizado por espacialidades intersticiais que parecem aludir ao estado liquido, onde a forma é mais matriz que configuração, o espaço mais espacialidade que compartimento, a função mais versátil e multivalente que especifica ou autónoma, e a perplexidade, a imaginação e a evocação entrecruzam-se e tornam-se patentes. 6. A arquitectura dos lugares intermédios valoriza não só o “plano”, a “configuração” e a “transparência”, mas sobretudo o” espaço” e a ”relação” nas suas inter-relações com os utentes e restante contextos. Da identidade à relacionalidade, da representação à apresentação, é uma arquitectura que propõe “outros espaços”, que além de espaços são topografias e espacialidades intersticiais, de tensão, transição, transformação, relação, intercambio e interacção. São lugares intermédios reais e virtuais que utilizam tanto a morfologia como a topologia para conquistar novas espacialidades, pretendendo ultrapassar a estrita operação de “forming”/“morphing”/formação para explorar a de “spacing”/espaçamento. São lugares que se apoiam tanto no conceito de zona de indescernibilidade de Deleuze, como na de imagem-fluxo de Buci-Glucksmann como no de suspensão–entre de Sloterdijk ou de espaço-não objectivo que refere José Gil, e se plasmam na arquitectura contemporânea como tropos do intersticial. 7. São os lugares intermédios da arquitectura actual, de espacialidade háptica, mais “afectiva”, generativa e interactiva, onde esse âmbito intermédio transforma e é transformado, “afecta”, ”co-move “(nos faz mover/agir) e evoca outros lugares, outras possibilidades de espaço habitável ou ocupável. Emerge o intermédio como lugar que, paradigmática e manifestamente, o monumento de Eisenmann em Berlim, anuncia e exibe.

Estudio y diseño de elementos acústicos para proporcionar una acústica variable en una sala multifuncional

El objetivo de este proyecto es profundizar en el estudio y diseño de sistemas relacionados con el acondicionamiento acústico para una sala multifuncional. El proyecto se compone de dos partes. Una parte teórica y una parte práctica dónde se aplican los conceptos teóricos aprendidos. La primera parte, está dividida en capítulos en los que se habla de los siguientes temas: Acústica de salas. Para obtener una acústica adecuada en un recinto destinado a varias funciones, se debe contar con una serie de características que lo definan según su uso, por lo que es necesario conocer el tiempo de reverberación y otros parámetros subjetivos para poder caracterizar ese recinto. Materiales para el acondicionamiento acústico, donde se habla de los materiales absorbentes clasificándolos según las frecuencias a las que actúan y de los distintos tipos de difusores. Métodos para conseguir una acústica variable mediante la utilización de elementos físicos variables, citando casos reales de salas multifuncionales. La segunda parte, consiste en la realización de diseños de elementos de acústica variable para una posible utilización en salas polivalentes reales. La herramienta elegida a la hora de la elaboración de estos diseños es el AutoCad. Con esta herramienta se han realizado estos diseños representados en dos y tres dimensiones. ABSTRACT. The objective of this project is to deepen the study and design of systems related to multifunctional room acoustic conditioning. The project is composed of two parts. A theoretical part and a practical part where the learned theoretical concepts are applied. The first part is divided into chapters in which we talk about the following topics: Acoustics of rooms. To obtain proper acoustics in a room intended for various functions, you must have a number of characteristics that define it according to its use, so it is necessary to know the reverberation time and other subjective parameters to characterize the hall. Materials for acoustic conditioning, where we talk about the absorbent materials classified according to frequencies that those materials act and the different types of diffusers. Methods for obtain a variable acoustic by using variable physical elements, mentioning real cases of multi-purpose rooms. The second part deals with designs execution of variable acoustic elements for a possible use in a real multipurpose room. The chosen tool to develop these designs is the AutoCad. These designs have been made with this tool, represented in two and three dimensions.

Enhancing Conservation Options: An Argument for Statutory Recognition of Options to Purchase Conservation Easements (OPCEs)

The most dynamic component of the conservation movement in the United States for the past three decades has been land conservation transactions. In the United States, land conservation organizations have protected roughly 40 million acres of land through transactions. Most of these acres have been protected using conservation easements. Climate change threatens the vast conservation edifice created by land conservation transactions. The tools of land conservation transactions are, traditionally, stationary. Climate change means that the resources that land conservation transactions were intended to protect may no longer remain on the land protected. Options to purchase conservation easements (OPCEs) have long played a modest but important role in conservation law practice. In the world climate change is creating, with its substantial uncertainties and shifting windows of opportunity, OPCEs can serve more complicated and strategic purposes. The ability of OPCEs to serve important roles in protecting land in the context of uncertainty would be significantly increased if state legislatures amend current conservation easement statutes to (1) specifically recognize OPCEs, (2) immunize OPCEs from a range of potential common law challenges, (3) guarantee the durability and transferability of OPCEs, and (4) integrate OPCEs into the burgeoning body of conservation easement law. These statutory amendments would do for OPCEs what conservation easement statutes have done for conservation easements: transform them into an essential multi-purpose tool for conservation in a changing world.

Avaliação in vitro da resistência adesiva à microtracção e caracterização morfológica com SEM de um novo sistema adesivo

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Resistência adesiva (µTBS) da reparação de um novo material nano cerâmico/resina (Lava™ Ultimate) fazendo variar o protocolo adesivo: estudo in vitro

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

The diagnostic interview for psychoses (DIP): development, reliability and applications

Background. We describe the development, reliability and applications of the Diagnostic Interview for Psychoses (DIP), a comprehensive interview schedule for psychotic disorders. Method. The DIP is intended for use by interviewers with a clinical background and was designed to occupy the middle ground between fully structured, lay-administered schedules, and semi-structured., psychiatrist-administered interviews. It encompasses four main domains: (a) demographic data; (b) social functioning and disability; (c) a diagnostic module comprising symptoms, signs and past history ratings; and (d) patterns of service utilization Lind patient-perceived need for services. It generates diagnoses according to several sets of criteria using the OPCRIT computerized diagnostic algorithm and can be administered either on-screen or in a hard-copy format. Results. The DIP proved easy to use and was well accepted in the field. For the diagnostic module, inter-rater reliability was assessed on 20 cases rated by 24 clinicians: good reliability was demonstrated for both ICD-10 and DSM-III-R diagnoses. Seven cases were interviewed 2-11 weeks apart to determine test-retest reliability, with pairwise agreement of 0.8-1.0 for most items. Diagnostic validity was assessed in 10 cases, interviewed with the DIP and using the SCAN as 'gold standard': in nine cases clinical diagnoses were in agreement. Conclusions. The DIP is suitable for use in large-scale epidemiological studies of psychotic disorders. as well as in smaller Studies where time is at a premium. While the diagnostic module stands on its own, the full DIP schedule, covering demography, social functioning and service utilization makes it a versatile multi-purpose tool.

Audience design in the police interview:the interactional and judicial consequences of audience orientation

Police-suspect interviews in England & Wales are a multi-audience, multi-purpose, transcontextual mode of discourse. They are conducted as part of the initial investigation into a crime, but are subsequently recontextualised through the judicial process, ultimately being presented in court as evidence against the interviewee. The communicative challenges posed by multiple future audiences are investigated by applying Bell’s (1984) audience design model to the police interview, and the resulting "poor fit" demonstrates why this context is discursively counter-intuitive to participants. Further, data analysis indicates that interviewer and interviewee, although ostensibly addressing each other, may orientate to different audiences, with potentially serious consequences. As well as providing new insight into police-suspect interview interaction, this article seeks to extend understanding of the influence of audience on interaction at the discourse level, and to contribute to the development of theoretical models for contexts with multiple or asynchronous audiences.

Benefit segmentation of international travelers to Macau, China

The purpose of this study is threefold: (1) to identify the underlying benefits sought by international visitors to Macau, China, which has emerged as a popular gambling destination in Asia; (2) to segment tourists visiting Macau by employing a cluster analysis based on the benefits sought; and (3) to examine any salient differences between the segment groups with regard to their behavioral characteristics, socio-economic characteristics, and demographic profiles. A convenience sample was used to collect data in the Macau International Airport, in the Macau Ferry Terminal, and at the border gate with Mainland China. A total 1,513 useful surveys were retained for data analysis. Cluster analysis discloses four distinct clusters: "convention and business seekers," "family and vacation seekers," "gambling and shopping seekers," and "multi-purpose seekers." Based on the results of our findings, several managerial implications are discussed. © Taylor & Francis Group, LLC.

An analysis of police interview discourse and its role(s) in the judicial process

This study analyses the current role of police-suspect interview discourse in the England & Wales criminal justice system, with a focus on its use as evidence. A central premise is that the interview should be viewed not as an isolated and self-contained discursive event, but as one link in a chain of events which together constitute the criminal justice process. It examines: (1) the format changes undergone by interview data after the interview has taken place, and (2) how the other links in the chain – both before and after the interview – affect the interview-room interaction itself. It thus examines the police interview as a multi-format, multi-purpose and multi-audience mode of discourse. An interdisciplinary and multi-method discourse-analytic approach is taken, combining elements of conversation analysis, pragmatics, sociolinguistics and critical discourse analysis. Data from a new corpus of recent police-suspect interviews, collected for this study, are used to illustrate previously unaddressed problems with the current process, mainly in the form of two detailed case studies. Additional data are taken from the case of Dr. Harold Shipman. The analysis reveals several causes for concern, both in aspects of the interaction in the interview room, and in the subsequent treatment of interview material as evidence, especially in the light of s.34 of the Criminal Justice and Public Order Act 1994. The implications of the findings for criminal justice are considered, along with some practical recommendations for improvements. Overall, this study demonstrates the need for increased awareness within the criminal justice system of the many linguistic factors affecting interview evidence.

Disaster risk reduction infrastructure requirements for South-Western Bangladesh:perspectives of local communities

Purpose: Development of effective disaster risk reduction (DRR) strategies for communities at risk of being affected by natural disasters is considered essential, especially in the wake of devastating disaster events reported worldwide. As part of a wider research study investigating community perspectives on existing and potential strategies for enhancing resilience to natural disasters, community perspectives on infrastructure and structural protection requirements were investigated. The paper aims to discuss these issues. Design/methodology/approach: Patuakhali region in South-Western Bangladesh is a region significantly at risk of multiple natural hazards. In order to engage local communities and obtain their perspectives, focus group discussions were held with local community leaders and policy makers of at-risk communities in Patuakhali region, South-Western Bangladesh. Findings: Infrastructure and structural protection requirements highlighted included multi-purpose cyclone shelters, permanent embankments and improved transport infrastructure. Much of the discussions of focus group interviews were focused on cyclone shelters and embankments, suggesting their critical importance in reducing disaster risk and also dependence of coastal communities on those two measures. Originality/value: The research design adopted sought to answer the research questions raised and also to inform local policy makers on community perspectives. Local policy makers involved in DRR initiatives in the region were informed of community perspectives and requirements, thus contributing to community engagement in implementing DRR activities.

Pollination and breeding of jackfruit ({\it Artocarpus heterophyllus\/} Lam.) in South Florida

Jackfruit (Artocarpus heterophyllus Lam.) is a multi-purpose fruit tree, native to tropical Asia. It was introduced to South Florida in the early 1900s but has had little commercial importance. In recent years, there has been an increased interest in jackfruit as a commercial crop in South Florida, but there has been little scientific investigation conducted. The pollination mechanism was not clearly understood. This study focused on jackfruit breeding using 'Dang Rasimi' and 'Cheena' cultivars. Controlled hand-pollinations revealed that both cultivars were not apomictic. Both cultivars set fruit with self-pollination, but seed set and many fruit characters such as size, flesh percentage and edible percentage were greatly enhanced with cross-pollination. I conclude that jackfruit are outbreeding plants. Tests for pollen dispersal by wind were inconclusive. A variety of insects were collected, but few had a role in pollination. My results suggest that jackfruit are likely to have insect-assisted wind pollination in South Florida. ^

Matrix and reservoir-type multipurpose vaginal rings for controlled release of dapivirine and levonorgestrel

A matrix-type silicone elastomer vaginal ring providing 28-day continuous release of dapivirine (DPV) - a lead candidate human immunodeficiency virus type 1 (HIV-1) microbicide compound - has recently demonstrated moderate levels of protection in two Phase III clinical studies. Here, next-generation matrix and reservoir-type silicone elastomer vaginal rings are reported for the first time offering simultaneous and continuous in vitro release of DPV and the contraceptive progestin levonorgestrel (LNG) over a period of between 60 and 180days. For matrix-type vaginal rings comprising initial drug loadings of 100, 150 or 200mg DPV and 0, 16 or 32mg LNG, Day 1 daily DPV release values were between 4132 and 6113μg while Day 60 values ranged from 284 to 454μg. Daily LNG release ranged from 129 to 684μg on Day 1 and 2-91μg on Day 60. Core-type rings comprising one or two drug-loaded cores provided extended duration of in vitro release out to 180days, and maintained daily drug release rates within much narrower windows (either 75-131μg/day or 37-66μg/day for DPV, and either 96-150μg/day or 37-57μg/day for LNG, depending on core ring configuration and ignoring initial lag release effect for LNG) compared with matrix-type rings. The data support the continued development of these devices as multi-purpose prevention technologies (MPTs) for HIV prevention and long-acting contraception.

Sustainability Enhancement of a Turbine Vane Manufacturing Cell through Digital Simulation based Design

Modern manufacturing systems should satisfy emerging needs related to sustainable development. The design of sustainable manufacturing systems can be valuably supported by simulation, traditionally employed mainly for time and cost reduction. In this paper, a multi-purpose digital simulation approach is proposed to deal with sustainable manufacturing systems design through Discrete Event Simulation (DES) and 3D digital human modelling. DES models integrated with data on power consumption of the manufacturing equipment are utilized to simulate different scenarios with the aim to improve productivity as well as energy efficiency, avoiding resource and energy waste. 3D simulation based on digital human modelling is employed to assess human factors issues related to ergonomics and safety of manufacturing systems. The approach is implemented for the sustainability enhancement of a real manufacturing cell of the aerospace industry, automated by robotic deburring. Alternative scenarios are proposed and simulated, obtaining a significant improvement in terms of energy efficiency (−87%) for the new deburring cell, and a reduction of energy consumption around −69% for the coordinate measuring machine, with high potential annual energy cost savings and increased energy efficiency. Moreover, the simulation-based ergonomic assessment of human operator postures allows 25% improvement of the workcell ergonomic index.