Os isotope dating and growth hiatuses of Co-rich crust from central Pacific

Up to now, accurate determination of the growth age and hiatuses of the Co-rich crust is still a difficult work, which constrains the researches on the genesis, growth process, controlling factors, regional tectonics, paleo-oceanographic background, etc. of the Co-rich crust. This paper describes our work in determining the initial growth age of the Co-rich crust to be of the late Cretaceous Campanian Stage (about 75-80 Ma), by selecting the Co-rich crust with clear multi-layer structures in a central Pacific seamount for layer-by-layer sample analysis and using a number of chronological methods, such as Co flux dating, dating by correlation with Os-187/Os-188 evolution curves of seawater, and stratigraphic division by calcareous nannofossils. We have also discovered growth hiatuses with different time intervals in the early Paleocene, middle Eocene, late Eocene and early-middle Miocene, respectively. These results have provided an important age background for further researches on the Co-rich crust growth process and the paleo-oceanographic environment evolution thereby revealed in the said region.

An extended variable-grid global ocean circulation model and its preliminary results of the equatorial Pacific circulation

To investigate the interaction between the tropical Pacific and China seas a variable-grid global ocean circulation model with fine grid[(1/6)degrees] covering the area from 20degreesS to 50degreesN and from 99degrees to 150degreesE is developed. Numerical computation of the annually cyclic circulation fields is performed. The results of the annual mean zonal currents and deep to abyssal western boundary currents in the equatorial Pacific Ocean are reported. The North Equatorial Current,the North Equatorial Countercurrent, the South Equatorial Current and the Equatorial Undercurrent are fairly well simulated. The model well reproduces the northward flowing abyssal western boundary current. From the model results a lower deep western boundary current east of the Bismarck-Solomon-New Hebrides Island chain at depths around 2 000 in has been found. The model results also show that the currents in the equatorial Pacific Ocean have multi-layer structures both in zonal currents and western boundary currents, indicating that the global ocean overturning thermohaline circulation appears of multi-layer pattern.

Observation and modeling for terrestrial processes in alpine meadow

The water-heat transfer process between land and atmosphere in Haibei alpine meadow area has been systematically observed. A multi-layer coupling model for land-atmosphere interaction was presented with special attention paid to the moisture transfer in leaf stomata under unsaturated condition. A profound investigation on the physical process of turbulent transfer inside the vegetation has been performed with a revised formula of water absorption for root system. The present model facilitates the study of vertically distributed physical variables in detail. Numerical simulation was conducted according to the transfer process of Kinesia humility meadow in the area of Haibei Alpine Meadow Ecosystem Station, CAS. The calculated results agree well with observation.

双模式相关技术研究与实现

文中研究的相关跟踪技术主要应用于飞航导弹的末制导。现阶段，激光制导技术、GPS制导技术、合成孔径雷达（SAR）制导技术在我国的实际应用还不成熟，传统的电视、红外制导技术仍然具有很强的生命力，因而，基于可见光的视频相关跟踪技术具有重要的研究价值。本文主要论述的两种相关算法是：多灰度点相关（MPC）、区域模板相关（RTC）。其中多点相关（MPC）算法的跟踪灵敏度高，定位精度好，硬件实现比较方便，实时性能好；区域模板相关算法（RTC），在图像的匹配过程中，不仅考虑了目标区域的灰度特征，而且兼顾了区域里多灰度层次的位置特征、面积特征，算法具有很好的鲁棒性。文中深入研究了两种相关跟踪算法，并针对它们在实际应用中的不足，提出了有效的改善措施。最后，本文对两种相关跟踪算法进行了初步融合，一是：通过粗匹配、精匹配过程来选取目标跟踪点；二是：提出了一种度量模板更新的能量准则函数。大量的仿真实验结果表明：改进后的两种相关跟踪技术可以较好地完成一些复杂背景下的目标跟踪任务，两种算法的有效结合又进一步提高了目标跟踪的稳定性能和可靠性能。本文研究的一些相关跟踪技术已经运用到实际工程项目中。

加氢反应器壁原子氢分布的在线、实时、无损检测新技术

为了在线、实时、无损检测高温高压条件下运行的加氢反应器的多层器壁中原子氢的渗透速率和在任何指定剖面上的体浓度分布，发展了一种新型的检测技术．介绍了检测仪的结构设计及其特征。

不同基板预热温度对激光金属沉积成形过程温度场的影响

为降低成形过程的热应力,抑制成形过程裂缝的产生,减小成形过程试样和基板的翘曲变形,激光金属沉积成形往往需要进行基板预热,因此研究不同基板预热温度对激光金属沉积成形过程温度场的影响具有非常重要的意义.根据有限元分析中的"单元生死"技术,利用APDL编程建立了基板预热对激光金属沉积成形过程温度场影响的三维多道多层数值模拟模型,详细分析了基板未预热和分别预热到200,300,400,500,600℃时对沉积成形过程温度场和温度梯度的影响.通过中国科学院沈阳自动化研究所自行研制的激光金属沉积成形系统和基板预热系统,在与模拟过程相同的参数下,利用镍基合金粉末在基板未预热和分别预热到300,400,500,560℃时进行了成形试验,试验结果跟数值模拟结果吻合较好.

基板预热对激光金属沉积成形过程热应力的影响

为降低沉积过程的热应力,抑制成形过程中裂缝的产生,研究基板预热对激光金属沉积成形(Laser metal deposition shaping,LMDS)过程热应力的影响具有非常重要的意义。根据有限元分析中的"单元生死"思想,利用APDL(ANSYS parametric design language)编程建立多道多层激光金属沉积成形过程的数值模拟模型,深入探讨基板未预热和预热到400℃时对成形过程热应力的影响。计算结果表明,基板预热到400℃可以显著降低成形过程中试样的热应力变化波动性,试样的Von Mises热应力最大值可降低10%左右,其中x方向热应力最大值可降低8.5%左右,z方向热应力最大值可降低8.1%左右。在与模拟过程相同的条件下,利用自行研制的激光金属沉积成形设备进行了成形试验,成形试验的结果与模拟结果基本吻合。

不同基板预热温度对激光金属沉积成形过程热应力影响的研究

研究不同基板预热温度对激光金属沉积成形过程热应力的影响,对于降低成形过程的热应力,抑制成形过程裂缝的产生,减小成形过程试样和基板的翘曲变形具有非常重要的意义。根据有限元分析中的"单元生死"技术,编程建立了基板预热对激光金属沉积成形过程热应力影响的三维多道多层数值模拟模型,详细分析了基板未预热和分别预热到200℃、300℃、400℃、500℃、600℃时对沉积成形过程VonMise’s热应力、X方向、Y方向以及Z方向热应力的影响。在与模拟过程相同的参数下,利用镍基合金粉末分别在基板未预热和分别预热到300℃、400℃、500℃、600℃时进行了成形试验,试验的结果跟数值模拟结果吻合较好。

溶蚀岩体渗透水力学特性研究

Seepage control in karstic rock masses is one of the most important problems in domestic hydroelectric engineering and mining engineering as well as traffic engineering. At present permeability assessment and leakage analysis of multi-layer karstic rock masses are mainly qualitative, while seldom quantitative. Quantitative analyses of the permeability coefficient and seepage amount are conducted in this report, which will provide a theoretical basis for the study of seepage law and seepage control treatment of karstic rocks. Based on the field measurements in the horizontal grouting galleries of seepage control curtains on the left bank of the Shuibuya Hydropower Project on the Qingjiang river, a hydraulic model is established in this report, and the computation results will provide a scientific basis for optimization of grouting curtain engineering. Following issues are addressed in the report. (1) Based on the in-situ measurements of fissures and karstic cavities in grouting galleries, the characteristics of karstic rock mass is analyzed, and a stochastic structural model of karstic rock masses is set up, which will provide the basis for calculation of the permeability and leakage amount of karstic rock mass. (2) According to the distribution of the measured joints in the grouting galleries and the stochastic results obtained from the stochastic structural model of karstic rock mass between grouting galleries, a formula for computation of permeability tensor of fracturing system is set up, and a computation program is made with Visual Basic language. The computation results will be helpful for zoning of fissured rock masses and calculation of seepage amount as well as optimization of seepage control curtains. (3) Fractal theory is used to describe quantitatively the roughness of conduit walls of karstic systems and the sinuosity of karstic conduits. It is proposed that the roughness coefficient of kastic caves can be expressed by both fractal dimension Ds and Dr that represent respectively the extension sinuosity of karstic caves and the roughness of the conduit walls. The existing formula for calculating the seepage amount of karstic conduits is revised and programmed. The seepage amount of rock masses in the measured grouting galleries is estimated under the condition that no seepage control measures are taken before reservoir impoundment, and the results will be helpful for design and construction optimization of seepage curtains of the Shuibuya hydropower project. This report is one part of the subject "Karstic hydrogeology and the structural model and seepage hydraulics of karstic rock masses", a sub-program of "Study on seepage hydraulics of multi-layer karstic rock masses and its application in seepage control curtain engineering", which is financially supported by the Hubei Provincial key science and technology programme.

Influence of electrode structure on the performance of a direct methanol fuel cell

Direct methanol fuel cells (DMFCs) consisting of multi-layer electrodes provide higher performance than those with the traditional electrode. The new electrode structure includes a hydrophilic thin film and a traditional catalyst layer. A decal transfer method was used to apply the thin film to the Nafion(R) membrane. Results show that the performance of a cell with the hydrophilic thin film is obviously enhanced. A cell with the optimal thin film electrode structure operating at I M CH3OH, 2 atm oxygen and 90degreesC yields a current density of 100 mA/cm(2) at 0.53 V cell voltage. The peak power density is 120 mW/cm(2). The performance stability of a cell in a short-term life operation was also increased when the hydrophilic thin film was employed. (C) 2002 Elsevier Science B.V. All rights reserved.

Molecular dynamics simulation of observed c(4x4) and c(4x3) C60 alignments on the Si(100) reconstructed surface.

We have implemented a large-scale classical molecular dynamics simulation at constant temperature to provide a theoretical insight into the results of a recently performed experiment on the monolayer and multi-layer formations of molecular films on the Si(100) reconstructed dimerized surface. Our simulation has successfully reproduced all of the morphologies observed on the monolayer film by this experiment. We have obtained the formation of both c(4 4) and c(4 3) structures of the molecules and have also obtained phase transitions of the former into the latter.

Compression therapy in leg ulcer management

Led ulcer management is an important consideration for all nurses involved in the care of older people. Non-specialists in tissue viability might not always be aware of the evidence base for best practice. The authors examine the effectiveness of multi-layer and single-layer long or short stretch bandage systems in leg ulcer management.

The effect of 3D weaving and consolidation on carbon fiber tows, fabrics, and composites

This article investigates the damage imparted on load-bearing carbon fibers during the 3D weaving process and the subsequent compaction behavior of 3D woven textile preforms. The 3D multi-layer reinforcements were manufactured on a textile loom with few mechanical modifications to produce preforms with fibers orientated in the warp, weft, and through-the-thickness directions. Tensile tests were conducted on three types of commercially available carbon fibers, 12k HTA, 6k HTS, and 3k HTS in an attempt to quantify the effect of fiber damage induced during the 3D weaving process on the mechanical and physical performance of the fiber tows in the woven composite. The tests were conducted on fiber tows sampled from different locations in the manufacturing process from the bobbin, through the creel and loom mechanism, to the final woven fabric. Mechanical and physical testing were then conducted to quantify the tow geometry, orientation and the effect of compaction during manufacture of two styles of 3D woven composite by vacuumassisted resin transfer molding (VaRTM).

Freeze-dried, mucoadhesive system for vaginal delivery of the HIV microbicide, dapivirine: Optimisation by an artificial neural network

Dapivirine mucoadhesive gels and freeze-dried tablets were prepared using a 3 x 3 x 2 factorial design. An artificial neural network (ANN) with multi-layer perception was used to investigate the effect of hydroxypropyl-methylcellulose (HPMC): polyvinylpyrrolidone (PVP) ratio (XI), mucoadhesive concentration (X2) and delivery system (gel or freeze-dried mucoadhesive tablet, X3) on response variables; cumulative release of dapivirine at 24 h (Q(24)), mucoadhesive force (F-max) and zero-rate viscosity. Optimisation was performed by minimising the error between the experimental and predicted values of responses by ANN. The method was validated using check point analysis by preparing six formulations of gels and their corresponding freeze-dried tablets randomly selected from within the design space of contour plots. Experimental and predicted values of response variables were not significantly different (p > 0.05, two-sided paired t-test). For gels, Q(24) values were higher than their corresponding freeze-dried tablets. F-max values for freeze-dried tablets were significantly different (2-4 times greater, p > 0.05, two-sided paired t-test) compared to equivalent gets. Freeze-dried tablets having lower values for X1 and higher values for X2 components offered the best compromise between effective dapivirine release, mucoadhesion and viscosity such that increased vaginal residence time was likely to be achieved. (C) 2009 Elsevier B.V. All rights reserved.

Neural Network Modeling of Rheological Parameters of Grouts Containing Viscosity-Modifying Agent

The development of artificial neural network (ANN) models to predict the rheological behavior of grouts is described is this paper and the sensitivity of such parameters to the variation in mixture ingredients is also evaluated. The input parameters of the neural network were the mixture ingredients influencing the rheological behavior of grouts, namely the cement content, fly ash, ground-granulated blast-furnace slag, limestone powder, silica fume, water-binder ratio (w/b), high-range water-reducing admixture, and viscosity-modifying agent (welan gum). The six outputs of the ANN models were the mini-slump, the apparent viscosity at low shear, and the yield stress and plastic viscosity values of the Bingham and modified Bingham models, respectively. The model is based on a multi-layer feed-forward neural network. The details of the proposed ANN with its architecture, training, and validation are presented in this paper. A database of 186 mixtures from eight different studies was developed to train and test the ANN model. The effectiveness of the trained ANN model is evaluated by comparing its responses with the experimental data that were used in the training process. The results show that the ANN model can accurately predict the mini-slump, the apparent viscosity at low shear, the yield stress, and the plastic viscosity values of the Bingham and modified Bingham models of the pseudo-plastic grouts used in the training process. The results can also predict these properties of new mixtures within the practical range of the input variables used in the training with an absolute error of 2%, 0.5%, 8%, 4%, 2%, and 1.6%, respectively. The sensitivity of the ANN model showed that the trend data obtained by the models were in good agreement with the actual experimental results, demonstrating the effect of mixture ingredients on fluidity and the rheological parameters with both the Bingham and modified Bingham models.