Estudo experimental de pavimentos permeáveis para o controle do escoamento superficial na fonte

Técnicas atuais de Gerenciamento da Drenagem Urbana preconizam que a drenagem da água da precipitação seja realizada com o uso de dispositivos de controle que agem na fonte do escoamento superficial. Tais dispositivos têm o objetivo de recuperar a capacidade natural de armazenamento do solo, reduzida devido aos impactos da urbanização. Com o desvio do escoamento das áreas impermeáveis para esses dispositivos, o solo recupera as condições de escoamento anteriores à urbanização. A presente dissertação descreve um experimento inédito no Brasil, onde foi aplicada a técnica do Pavimento Permeável. Foi montado um aparato experimental que possibilita o monitoramento do desempenho do dispositivo, com o objetivo principal de analisar a viabilidade técnica da utilização de um pavimento permeável de baixo custo e tecnologia simples, no controle da geração de escoamento superficial na fonte. Com o trabalho, permitiuse uma maior difusão do conhecimento e propagação da técnica, ainda pouco dominada pelos engenheiros e contratantes. A obra consta de um lote de estacionamento de aproximadamente 264m2, que foi dividido em duas partes iguais, onde foram utilizados os seguintes revestimentos: asfalto poroso, de granulometria aberta; blocos vazados intertravados de concreto. O experimento foi projetado para permitir o monitoramento quali-quantitativo dos escoamentos nos dois tipos de pavimento, com relação à redução no escoamento superficial, quando sujeitos às condições de tráfego encontradas na prática, no lote de estacionamento situado próximo ao bloco de ensino do IPH/UFRGS. São discutidos aspectos relacionados às condições de funcionamento, adequação dos materiais empregados, eficiência do dispositivo e custos envolvidos. A avaliação da eficiência hidráulica-hidrológica do dispositivo foi feita através do monitoramento e análise de dados de precipitação, armazenamento no reservatório, escoamento superficial e umidade no solo subjacente. O pavimento permeável se mostrou uma técnica eficiente de controle na fonte do escoamento superficial. Foram obtidas taxas médias de 5% de escoamento superficial para a superfície com revestimento asfáltico, e de 2,3% para o revestimento em blocos vazados intertravados. Os dados de armazenamento mostraram que em nenhum evento o volume armazenado superou 25% da capacidade máxima do reservatório. Ainda com base nesses dados, verificou-se que a metodologia de dimensionamento utilizada super-dimensionou a estrutura reservatório. A importância do dimensionamento preciso da estrutura é evidenciada pela estimativa dos custos, onde se verifica que o reservatório de britas contribui para uma significativa parcela dos custos totais.

Comportamento mecânico de agregados de basaltos alterados para pavimentação, rejeitos de garimpo de ametista

Nos últimos anos, a pesquisa de materiais alternativos de pavimentação vem ganhando projeção no meio acadêmico. Estes materiais apresentam restrições quanto ao seu uso em rodovias de elevado volume de tráfego, mas geralmente atendem adequadamente às exigências de estradas de baixo volume de tráfego, às quais se destinam. Eles apresentam características muito importantes: baixo custo, proximidade com o trecho a ser pavimentado e disponibilidade. Alguns materiais alternativos estudados são as rochas vulcânicas alteradas, as lateritas e plintossolos, entre outros. Nesta dissertação, avalia-se o comportamento mecânico para emprego em pavimentação de dois basaltos alterados que são rejeitos de garimpo da extração de ametista. Os materiais foram recolhidos em fragmentos, resultado do desmonte para abertura das galerias para garimpo. Existem dois materiais disponíveis denominados de laje e cascalho, com graus de alteração e características bem diferenciados. No estudo, experimental analisaram-se a durabilidade e a deformabilidade. Foram realizados ensaios de abrasão Los Angeles, sanidade a sulfatos, equivalente de areia, lamelaridade, módulo de resiliência e deformações permanentes. Os agregados foram submetidos a uma britagem simples, de forma a obter-se uma granulometria denominada GU1 (objeto de estudos prévios realizados no Laboratório de Pavimentação da UFRGS) Os dois materiais apresentaram resultados satisfatórios em termos de resistência, deformabilidade e durabilidade, sendo recomendado o seu uso na pavimentação de rodovias de baixo volume de tráfego. O material designado como laje pode ser usado como sub-base, desde que se assegure uma boa drenagem que evite a degradação decorrente de constantes ciclos de molhagem e secagem. O cascalho pode ser usado tanto como sub-base ou base. Recomenda-se a aplicação de uma camada asfáltica impermeabilizante, quando não for possível a execução do revestimento em curto prazo. Apresenta-se, nos capítulos finais, uma análise mecanística e algumas estruturas que incluem os materiais estudados nas camadas de base e sub-base, bem como recomendações construtivas destinadas a otimizar o emprego desses materiais em pavimentos.

Potencial de produção de cana-energia em áreas agrícolas marginais no Brasil

A descoberta e utilização do petróleo provocaram significativas mudanças na sociedade ao longo do tempo, sendo ele um dos mais importantes fatores de transformação socioambiental e cultural no mundo ao longo do ultimo século. Sua grande gama de possibilidades de utilização acabou criando um sistema de produção baseado em um único agente energético, principalmente nos países que não possuem recursos hídricos nem outras fontes renováveis. Porém, nas ultimas décadas do século passado, começaram a surgir inúmeras discussões sobre a necessidade de se alterar a composição da matriz energética global. Como resultados das preocupações quanto à escassez daquele recurso natural, vários pesquisadores direcionaram seus estudos para a busca de alternativas que pudessem de forma sustentável se prestar como substituto ao petróleo. Uma delas seria o uso de biomassa, de forma a aproveitar a capacidade das plantas em transformar a energia solar em carbohidratos. O Brasil, além de possuir uma das matrizes energéticas mais diversificadas e limpas do mundo, possui grande extensão de terras agricultáveis o que o coloca em lugar de destaque quanto ao potencial de produção de culturas agroenergéticas. Considerando as características da cana-de-açúcar e a sua adaptação a áreas de cultivo do Brasil e impulsionados pela demanda de produção de biomassa moderna, a ser aplicada em processos de transformação mais complexos e que possibilitem a obtenção de outros produtos além de açúcar, álcool e energia, estudou-se neste trabalho plantas de cana-de-açúcar melhoradas com a finalidade exclusiva de produzir biomassa moderna, a chamada “cana- energia”. Esta é uma planta que, contrariamente à tradicional cana-de-açúcar, melhorada para produzir sacarose, é direcionada para produzir fibra, e que, além disso, por possuir maior participação de espécies ancestrais de maior rusticidade, estão aptas a suportar condições ambientais mais estressantes. Os resultados obtidos demonstraram que os híbridos de cana-energia apresentam grande potencial de produção de biomassa e massa seca por área, a custos altamente competitivos considerando as análises comparativas de custo de produção de massa seca por área. Quanto a produção foi possível observar que além de ser mais produtiva em primeiro corte, nos resultados de colheita de soqueira (segundo corte), o melhor híbrido de cana- energia chegou a produzir uma vez e meia mais massa seca que a cana-de-açúcar tradicional, e apresentou maiores produtividades que outras culturas energéticas tais como o eucalipto e o capim-elefante, sendo que, considerando as produtividades médias observadas, a partir do terceiro corte com estes níveis de produtividade, a cana-energia passa a ser a matéria prima de mais baixo custo de produção de massa seca por área, denotando o seu alto potencial como matéria prima para a produção de bioenergia. No Zoneamento agroecológico realizado para a cana energia foi possível identificar 32,3 milhões de hectares de áreas de produção agrícola marginais aptas ao cultivo deste material, sendo que de acordo com os resultados do zoneamento agrícola e as características das regiões em estudos, identifica-se que deste total, pode-se considerar que os materiais que se destacaram em produtividade neste estudo, apresentam boas condições de ocupar uma área de 2,0 a 8,0 milhões de hectares.

Caracterização termo-mecânica de interconectores metálicos recobertos com filmes de LaCrO3

The cells unitaria of the solid oxide fuel cell are separated by means of interconnects, which serve as electrical contact between the cells. Lanthanum Chromite (LaCrO3) has been the most common material used as interconnect in solid oxide fuel cells. Reducing the operating temperature around 800 º C of cells to solid oxide fuel make possibilite the use of metallic interconnects as an alternative to ceramic LaCrO3. Metallic interconnects have advantages over ceramic interconnects such as high thermal conductivity, electricity, good ductility, low cost, good physical and mechanical properties. In this work evaluate the thermo-mechanical properties of the metallic substrate and coated metallic substrate with the ceramic LaCrO3 film via spray-pyrolysis, in order to demonstrate the feasibility of using this material as a component of a fuel cell solid oxide. The materials were characterized by X-ray diffraction, oxidation behavior, mechanical strength, optical microscopy (OM) and scanning electron microscopy (SEM). The X-ray diffraction proved the formation phase of the LaCrO3 on the metallic substrate and the identification of the phases formed after the oxidative test and mechanical strength at high temperature. The oxidation behavior showed the increased oxidation resistance of the coated metallic substrate. It was noted that the mechanical resistance to bending of the coated metallic substrate only increases at room temperature. The optical microscopy (OM) has provided an assessment of both the metallic substrate and the LaCrO3 film deposited on the metal substrate that, in comparison with the micrographs obtained from SEM. The SEM one proved the formation of Cr2O3 layer on the metallic substrate and stability of LaCrO3 film after oxidative test, it can also observe the displacement of the ceramic LaCrO3 film after of mechanical testing and mapping of the main elements as chromium, manganese, oxygen, lanthanum in samples after the thermo-mechanical tests.

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita

The destructive impact of improper disposal of heavy metals in the environment increases as a direct result of population explosion, urbanization and industrial expansion and technological developments. Argil are potential materials for adsorption of inorganic and the pelletization of it is required for use in adsorptive columns of fixed bed. The low cost and the possibility of regeneration makes these materials attractive for use in the purification process, capable of removing inorganic compounds in contaminated aquatic environments. In this work was made pellets of a mixture of dolomite and montmorillonite by wet agglomeration, in different percentages. The removal of Pb (II) was investigated through experimental studies, and was modeled by kinetic models and isotherms of adsorption. The materials were characterized using the techniques of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of pseudosecond order

Obtenção e caracterização de dióxido de estanho nanoestruturado pelo método de síntese contínua por combustão em solução

Continuous Synthesis by Solution Combustion was employed in this work aiming to obtain tin dioxide nanostructured. Basically, a precursor solution is prepared and then be atomized and sprayed into the flame, where its combustion occurs, leading to the formation of particles. This is a recent technique that shows an enormous potential in oxides deposition, mainly by the low cost of equipment and precursors employed. The tin dioxide (SnO2) nanostructured has been widely used in various applications, especially as gas sensors and varistors. In the case of sensors based on semiconducting ceramics, where surface reactions are responsible for the detection of gases, the importance of surface area and particle size is even greater. The preference for a nanostructured material is based on its significant increase in surface area compared to conventional microcrystalline powders and small particle size, which may benefit certain properties such as high electrical conductivity, high thermal stability, mechanical and chemical. In this work, were employed as precursor solution tin chloride dehydrate diluted in anhydrous ethyl alcohol. Were utilized molar ratio chloride/solvent of 0,75 with the purpose of investigate its influence in the microstructure of produced powder. The solution precursor flux was 3 mL/min. Analysis with X-ray diffraction appointed that a solution precursor with molar ratio chloride/solvent of 0,75 leads to crystalline powder with single phase and all peaks are attributed to phase SnO2. Parameters as distance from the flame with atomizer distance from the capture system with the pilot, molar ratio and solution flux doesn t affect the presence of tin dioxide in the produced powder. In the characterization of the obtained powder techniques were used as thermogravimetric (TGA) and thermodiferential analysis (DTA), particle size by laser diffraction (GDL), crystallographic analysis by X-ray diffraction (XRD), morphology by scanning electron microscopy (SEM), transmission electron microscopy (TEM), specific surface area (BET) and electrical conductivity analysis. The techniques used revealed that the SnO2 exhibits behavior of a semiconductor material, and a potentially promising material for application as varistor and sensor systems for gas

Impregnação de metais em xisto retortado para uso como adsorventes

Concern with the environment has lead to an increase in the research for new adsorption techniques, low cost adsorvent materials and with high availability. Many works search the development of higher selectivity modified adsorvents. The Brazil has the second world reserve of oiled shale, because of it, the use of that reject is of great interest. This study has the goal of characterize and analyze the retorted shale, reject of the pirobetuminous shale pyrolysis, and the retorted shale modified through the humid impregnation method, wich the precursors were the metals nitrates ( Cobalt, Nickel and Copper), to the usage has adsorvent materials. The samples were characterized chemically, textually and structurally by the X ray fluorescence (XRF), BET, X ray diffraction (XRD) and scanning electronic microscopy (SEM) techniques. The impregnated samples showed a reduction in the superficial area and in the pore volume when compared with the retorted shale. Besides that, diffractions referred to the impregnated metals where observed in the XRD analysis, wich were the same metals detected in the XRF and SEM analysis. The materials showed homogeneity in it s composition. The results shows that the materials presents adequate adsorption characteristics

Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Avaliação de concreto com adição de fibras de PET submetido a altas temperaturas

The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Plataforma Robótica de Baixíssimo Custo para Robótica Educacional

Robots are present each time more on several areas of our society, however they are still considered expensive equipments that are restricted to few people. This work con- sists on the development of control techniques and architectures that make possible the construction and programming of low cost robots with low programming and building complexity. One key aspect of the proposed architecture is the use of audio interfaces to control actuators and read sensors, thus allowing the usage of any device that can produce sounds as a control unit of a robot. The work also includes the development of web ba- sed programming environments that allow the usage of computers or mobile phones as control units of the robot, which can be remotely programmed and controlled. The work also includes possible applications of such low cost robotic platform, including mainly its educational usage, which was experimentally validated by teachers and students of seve- ral graduation courses. We also present an analysis of data obtained from interviews done with the students before and after the use of our platform, which confirms its acceptance as a teaching support tool

Desenvolvimento e projeto de colhedora de babaçu (Orbignya phalerata Mart.) para agricultura familiar nas regiões de matas de transição da Amazônia

O babaçu (Orbignya phalerata) é uma típica palmeira das matas de transição dos ecossistemas Amazônia/Cerrado e Amazônia/Caatinga, sendo de grande importância econômica, social e ambiental nestas regiões. Os produtos advindos dos babaçuais possibilitam renda para uma das camadas mais pobres da região amazônica e um dos entraves para a obtenção eficiente destes produtos é a colheita dos cocos de babaçu, que atualmente se faz no sistema extrativista. O objetivo deste trabalho foi realizar o desenvolvimento e projeto de uma colhedora de babaçu adaptável ao ambiente de trabalho da agricultura familiar e as características das matas de transição amazônicas. Para tal foram realizados estudos de literatura que nortearam as decisões e simplificações de projeto, assim como foram realizados os cálculos e desenhos da nova colhedora. O projeto foi realizado através de ferramentas de engenharia que apresentaram como resultados o memorial de cálculo que descreve o caminho técnico para o dimensionamento dos elementos constituintes da colhedora e a partir destes os desenhos detalhados dos elementos da nova máquina. Pelos desenhos detalhados suas considerações e decisões concluí-se que a colhedora de babaçu apresenta-se passível de ser construída com materiais nacionais de baixo custo, além de fácil operação, manutenção e com mínimo efeito sobre os babaçuais naturais.