Implementação de produção enxuta em uma empresa de manutenção de equipamentos rotativos

This graduation work presents the implementation of the key concepts of lean thinking in a maintenance workshop of rotating equipment, analyzing all the administrative and workshop processes. The pursuit of quality and client satisfaction at lower costs has generated a lot of competition between organizations, which use the practices of lean manufacturing as tools for processes improvement, aiming to eliminate wastes, being this, the work objective. And, unlike a manufacturing system, where the product goes through certain stages until its conclusion, the workshop does not have a default sequence that is repeated routinely on all machines. Thus, it demonstrates a possibility of application of lean tools in a different way of the common used in the lean manufacturing

Implantação do sistema kanban para elementos de fixação em maquinas de movimentação de terra

Always seeking the maximum profit under the reduced production time and lower number of failures, companies are increasingly evolving and going after continuous improvement in order to remain competitive in the market. Thus, increasingly there is investment in the management system Lean manufacturing. Lean system is very important, because through it, the maximum value is added in the final product. Being measured by the efficiency and reducing failures to zero. In the studied company, Lean manufacturing system came into effect through the kanban system for purchasing, control and distribution of bulk material used in the assembly of the final product, which are earth-moving machines. It is very important to check the great change made in the company with the implementation of kanban. All inventory management becomes visual, elements are arranged in an organized manner, with addresses in structures, calculated in special boxes and finally, assemblers have the guarantee of an item supply, with the distribution cars located on their assembly area. This study participates effectively assuring the supply. Avoiding any failure on the lack of material, non-compliance of delivery times to the customer and maintenance of over-stock or obsolete inventory, in which case both cause financial loss to the company

Machine vision and planning applied on assembby line of multiple products

This article describes the use of Artificial Intelligence (IA) techniques applied in cells of a manufacturing system. Machine Vision was used to identify pieces and their positions of two different products to be assembled in the same productive line. This information is given as input for an IA planner embedded in the manufacturing system. Therefore, initial and final states are sent automatically to the planner capable to generate assembly plans for a robotic cell, in real time.

Fuzzy Multi-Objective Linear Programming and Simulation Approach to the Development of Valid and Realistic Master Production Schedule

Master production schedule (MPS) plays an important role in an integrated production planning system. It converts the strategic planning defined in a production plan into the tactical operation execution. The MPS is also known as a tool for top management to control over manufacture resources and becomes input of the downstream planning levels such as material requirement planning (MRP) and capacity requirement planning (CRP). Hence, inappropriate decision on the MPS development may lead to infeasible execution, which ultimately causes poor delivery performance. One must ensure that the proposed MPS is valid and realistic for implementation before it is released to real manufacturing system. In practice, where production environment is stochastic in nature, the development of MPS is no longer simple task. The varying processing time, random event such as machine failure is just some of the underlying causes of uncertainty that may be hardly addressed at planning stage so that in the end the valid and realistic MPS is tough to be realized. The MPS creation problem becomes even more sophisticated as decision makers try to consider multi-objectives; minimizing inventory, maximizing customer satisfaction, and maximizing resource utilization. This study attempts to propose a methodology for MPS creation which is able to deal with those obstacles. This approach takes into account uncertainty and makes trade off among conflicting multi-objectives at the same time. It incorporates fuzzy multi-objective linear programming (FMOLP) and discrete event simulation (DES) for MPS development.

An Alternative Method to Achieve Metrological Confirmation in Measurement Processes

Metrological confirmation process must be designed and implemented to ensure that metrological characteristics of the measurement system meet metrological requirements of the measurement process. The aim of this paper is to present an alternative method to the traditional metrological requirements about the relationship between tolerance and measurement uncertainty, to develop such confirmation processes. The proposed way to metrological confirmation considers a given inspection task of the measurement process into the manufacturing system, and it is based on the Index of Contamination of the Capability, ICC. Metrological confirmation process is then developed taking into account the producer risks and economic considerations on this index. As a consequence, depending on the capability of the manufacturing process, the measurement system will be or will not be in adequate state of metrological confirmation for the measurement process.

ISA S88 / Loose Coupling Based Solution for Production Control Software Reusability

A solution for the problem of reusability of software system for batch production systems is proposed. It is based on ISA S88 standard that prescribes the abstraction of elements in the manufacturing system that is equipment, processes and procedures abstraction, required to make a product batch. An easy to apply data scheme, compatible with the standard, is developed for management of production information. In addition to flexibility provided by the S88 standard, software system reusability requires a solution supporting manufacturing equipment reconfigurability. Toward this end a coupling mechanism is developed. A software tool, including these solutions, was developed and validated at laboratory level, using product manufacturing information of an actual plant.

Esquema de Referencia para Acoplamiento Débil entre Sistema Informático y Equipo de Producción

La meta de intercambiabilidad de piezas establecida en los sistemas de producción del siglo XIX, es ampliada en el último cuarto del siglo pasado para lograr la capacidad de fabricación de varios tipos de producto en un mismo sistema de manufactura, requerimiento impulsado por la incertidumbre del mercado. Esta incertidumbre conduce a plantear la flexibilidad como característica importante en el sistema de producción. La presente tesis se ubica en el problema de integración del sistema informático (SI) con el equipo de producción (EP) en la búsqueda de una solución que coadyuve a satisfacer los requerimientos de flexibilidad impuestas por las condiciones actuales de mercado. Se describen antecedentes de los sistemas de producción actuales y del concepto de flexibilidad. Se propone una clasificación compacta y práctica de los tipos de flexibilidad relevantes en el problema de integración SI-EP, con la finalidad de ubicar el significado de flexibilidad en el área de interés. Así mismo, las variables a manejar en la solución son clasificadas en cuatro tipos: Medio físico, lenguajes de programación y controlador, naturaleza del equipo y componentes de acoplamiento. Por otra parte, la característica de reusabilidad como un efecto importante y deseable de un sistema flexible, es planteada como meta en la solución propuesta no solo a nivel aplicación del sistema sino también a nivel de reuso de conceptos de diseño. Se propone un esquema de referencia en tres niveles de abstracción, que permita manejar y reutilizar en forma organizada el conocimiento del dominio de aplicación (integración SI-EP), el desarrollo de sistemas de aplicación genérica así como también la aplicación del mismo en un caso particular. Un análisis del concepto de acoplamiento débil (AD) es utilizado como base en la solución propuesta al problema de integración SI-EP. El desarrollo inicia identificando condiciones para la existencia del acoplamiento débil, compensadores para soportar la operación del sistema bajo AD y los efectos que ocasionan en el sistema informático los cambios en el conjunto de equipos de producción. Así mismo, se introducen como componentes principales del acoplamiento los componentes tecnológico, tarea y rol, a utilizar en el análisis de los requerimientos para el desarrollo de una solución de AD entre SI-EP. La estructura de tres niveles del esquema de referencia propuesto surge del análisis del significado de conceptos de referencia comúnmente reportados en la literatura, tales como arquitectura de referencia, modelo de referencia, marco de trabajo, entre otros. Se presenta un análisis de su significado como base para la definición de cada uno de los niveles de la estructura del esquema, pretendiendo con ello evitar la ambigüedad existente debido al uso indistinto de tales conceptos en la literatura revisada. Por otra parte, la relación entre niveles es definida tomando como base la estructura de cuatro capas planteada en el área de modelado de datos. La arquitectura de referencia, implementada en el primer nivel del esquema propuesto es utilizada como base para el desarrollo del modelo de referencia o marco de trabajo para el acoplamiento débil entre el SI y el EP. La solución propuesta es validada en la integración de un sistema informático de coordinación de flujo y procesamiento de pieza con un conjunto variable de equipos de diferentes tipos, naturaleza y fabricantes. En el ejercicio de validación se abordaron diferentes estándares y técnicas comúnmente empleadas como soporte al problema de integración a nivel componente tecnológico, tales como herramientas de cero configuración (ejemplo: plug and play), estándar OPC-UA, colas de mensajes y servicios web, permitiendo así ubicar el apoyo de estas técnicas en el ámbito del componente tecnológico y su relación con los otros componentes de acoplamiento: tarea y rol. ABSTRACT The interchangeability of parts, as a goal of manufacturing systems at the nineteenth century, is extended into the present to achieve the ability to manufacture various types of products in the same manufacturing system, requirement associated with market uncertainty. This uncertainty raises flexibility as an important feature in the production system. This thesis addresses the problem regarding integration of software system (SS) and the set of production equipment (PE); looking for a solution that contributes to satisfy the requirements of flexibility that the current market conditions impose on manufacturing, particularly to the production floor. Antecedents to actual production systems as well as the concept of flexibility are described and analyzed in detail. A practical and compact classification of flexibility types of relevance to the integration SS-EP problem is proposed with the aim to delimit the meaning of flexibility regarding the area of interest. Also, a classification for the variables involved in the integration problem is presented into four types: Physical media, programming and controller languages, equipment nature and coupling components. In addition, the characteristic of reusability that has been seen as an important and desirable effect of a flexible system is taken as a goal in the proposed solution, not only at system implementation level but also at system design level. In this direction, a reference scheme is proposed consisting of three abstraction levels to systematically support management and reuse of domain knowledge (SS-PE), development of a generic system as well as its application in a particular case. The concept of loose coupling is used as a basis in the development of the proposed solution to the problem of integration SS-EP. The first step of the development process consists of an analysis of the loose coupled concept, identifying conditions for its existence, compensators for system operation under loose coupling conditions as well as effects in the software system caused by modification in the set of production equipment. In addition coupling components: technological, task and role are introduced as main components to support the analysis of requirements regarding loose coupling of SS-PE. The three tier structure of the proposed reference scheme emerges from the analysis of reference concepts commonly reported in the literature, such as reference architecture, reference model and framework, among others. An analysis of these concepts is used as a basis for definition of the structure levels of the proposed scheme, trying to avoid the ambiguity due to the indiscriminate use of such concepts in the reviewed literature. In addition, the relation between adjacent levels of the structure is defined based on the four tiers structure commonly used in the data modelling area. The reference architecture is located as the first level in the structure of the proposed reference scheme and it is utilized as a basis for the development of the reference model or loose coupling framework for SS-PE integration. The proposed solution is validated by integrating a software system (process and piece flow coordination system) with a variable set of production equipment including different types, nature and manufacturers of equipment. Furthermore, in this validation exercise, different standards and techniques commonly used have been taken into account to support the issue of technology coupling component, such as tools for zero configuration (i.e. Plug and Play), message queues, OPC-UA standard, and web services. Through this part of the validation exercise, these integration tools are located as a part of the technological component and they are related to the role and task components of coupling.

la fabbrica automatica e i sistemi di controllo integrati

Lo scopo della presente tesi è quello di illustrare alcuni dei principali strumenti messi a disposizione dai controlli automatici a servizio dell’ingegneria, in particolare analizzando la struttura generale di una fabbrica automatica e descrivendone i principali sistemi di controllo. L’elaborato è suddiviso in tre macro parti: la prima ha l’obiettivo di inquadrare quella che è la fabbrica automatica, partendo dal precedente concetto di fabbrica tradizionale fino ad arrivare alla fabbrica moderna, caratterizzata da una spinta flessibilità produttiva determinata da una politica di produzione per lotti con elevati livelli di caratterizzazione. Della fabbrica automatica viene poi approfondita l’integrazione con i calcolatori attraverso il sistema concettuale del CIM, Computer Integrated Manufacturing, e l’impiego di celle di fabbricazione flessibili, ovvero le FMS, Flexible Manufacturing System. La seconda parte è incentrata sull’analisi delle logiche di controllo impiegate all’interno di tutto il processo di progettazione e di produzione, suddivise in tre gruppi: il primo focalizzato sui sistemi per la produzione automatica, NC e DNC; il secondo sui sistemi di simulazione e testing del prodotto, CAD, CAM e CAT; il terzo sui sistemi di controllo e sviluppo dati, SCADA, MES e DCS. La terza ed ultima parte è circoscritta all’approfondimento di un particolare sistema di controllo per la gestione dei processi, ovvero sull’uso del PLC, il Controllore Logico Programmabile. Vengono analizzate le componenti fisiche che lo costituiscono, il funzionamento base, i tempi di esecuzione delle istruzioni, i criteri di scelta e di dimensionamento ed altri aspetti rilevanti. Infine è presente un esempio applicativo di alcuni aspetti sovra citati con il caso dell’azienda bolognese G.D, leader del settore delle macchine automatiche a controllo numerico per la fabbricazione e l’impacchettamento delle sigarette.

On the role of magnesium and nitrogen in the infiltration of aluminium by aluminium for rapid prototyping applications

Selective laser sintering has been used to fabricate an aluminium alloy powder preform which is subsequently debound and infiltrated with a second aluminium alloy. This represents a new rapid manufacturing system for aluminium that can be used to fabricate large, intricate parts. The base powder is an alloy such as AA6061. The infiltrant is a binary or higher-order eutectic based on either Al-Cu or At-Si. To ensure that infiltration occurs without loss of dimensional precision, it is important that a rigid skeleton forms prior to infiltration. This can be achieved by the partial transformation of the aluminium to aluminium nitride. In order for this to occur throughout the component, magnesium powder must be added to the alumina support powder which surrounds the part in the furnace. The magnesium scavenges the oxygen and thereby creates a microclimate in which aluminium nitride can form. The replacement of the ionocovalent Al2O3 with the covalent AlN on the surface of the aluminium powders also facilitates wetting and thus spontaneous and complete infiltration. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The development of hard real-time systems using a formal approach

Hard real-time systems are a class of computer control systems that must react to demands of their environment by providing `correct' and timely responses. Since these systems are increasingly being used in systems with safety implications, it is crucial that they are designed and developed to operate in a correct manner. This thesis is concerned with developing formal techniques that allow the specification, verification and design of hard real-time systems. Formal techniques for hard real-time systems must be capable of capturing the system's functional and performance requirements, and previous work has proposed a number of techniques which range from the mathematically intensive to those with some mathematical content. This thesis develops formal techniques that contain both an informal and a formal component because it is considered that the informality provides ease of understanding and the formality allows precise specification and verification. Specifically, the combination of Petri nets and temporal logic is considered for the specification and verification of hard real-time systems. Approaches that combine Petri nets and temporal logic by allowing a consistent translation between each formalism are examined. Previously, such techniques have been applied to the formal analysis of concurrent systems. This thesis adapts these techniques for use in the modelling, design and formal analysis of hard real-time systems. The techniques are applied to the problem of specifying a controller for a high-speed manufacturing system. It is shown that they can be used to prove liveness and safety properties, including qualitative aspects of system performance. The problem of verifying quantitative real-time properties is addressed by developing a further technique which combines the formalisms of timed Petri nets and real-time temporal logic. A unifying feature of these techniques is the common temporal description of the Petri net. A common problem with Petri net based techniques is the complexity problems associated with generating the reachability graph. This thesis addresses this problem by using concurrency sets to generate a partial reachability graph pertaining to a particular state. These sets also allows each state to be checked for the presence of inconsistencies and hazards. The problem of designing a controller for the high-speed manufacturing system is also considered. The approach adopted mvolves the use of a model-based controller: This type of controller uses the Petri net models developed, thus preservIng the properties already proven of the controller. It. also contains a model of the physical system which is synchronised to the real application to provide timely responses. The various way of forming the synchronization between these processes is considered and the resulting nets are analysed using concurrency sets.

Perceptions of technological change : the attitude of managers towards group technology in the United States food equipment industry

In the center of today's continued and rapid technological change and ever competitive environment of the next millennium, manufacturers must realize that unless they are ready to consider and evaluate new technologies brought onto them, they may fail to adequately respond to the challenges that lie ahead of them. This research was designed to determine the consistency of the perceptions of technical and non-technical administrators, in manufacturing environment, towards technological change and group technology as an advanced manufacturing system. This research has included a review of literature with references to technological change, justification and implementation processes, and various manufacturing systems including group technology and its benefits. This research has used the research method of empirical analysis (quantitative) and case studies (qualitative) to research perceptions of technical and non-technical administrators towards technological change and group technology. Sixty-four (64) technical and fifty-one (51) nontechnical administrators from fifty (50) manufacturing organizations in the United States of America responded to the mail survey questionnaire used in this research. Responses were analyzed using the Repeated Measures ANOVA procedure to compare mean responses of each group. Two correlation analyses, Cronback Coefficient Alpha and Pearson Correlation Coefficient, were also performed to determine the reliability of the questionnaire as well as the degree of correlation of perceptions between these two groups. This research, through the empirical analysis, has found that perceptions of the technical and non-technical administrators towards group technology were not consistent. In other words, they did not perceive the benefits of group technology in the same manner to the overall organizational performance. This finding was significant since it provided the first clear and comprehensive view of the technical and non-technical administrators' perception towards group technology and technological change, in Food Equipment Manufacturer Industry, in United States of America. In addition, a number of cases were analyzed and the results have supported those of the quantitative analysis. Therefore, this research not only has provided basic data, which was unavailable prior to this investigation, but it also provided a basis for future studies.

Cost effectiveness of production control systems

This thesis deals with the problems associated with the planning and control of production, with particular reference to a small aluminium die casting company. The main problem areas were identified as: (a) A need to be able to forecast the customers demands upon the company's facilities. (b) A need to produce a manufacturing programme in which the output of the foundry (or die casting section) was balanced with the available capacity in the machine shop. (c) The need to ensure that the resultant system enabled the company's operating budget to have a reasonable chance of being achieved. At the commencement of the research work the major customers were members of the automobile industry and had their own system of forecasting, from which they issued manufacturing schedules to their component suppliers, The errors in the forecast were analysed and the distributions noted. Using these distributions the customer's forecast was capable of being modified to enable his final demand to be met with a known degree of confidence. Before a manufacturing programme could be developed the actual manufacturing system had to be reviewed and it was found that as with many small companies there was a remarkable lack of formal control and written data. Relevant data with regards to the component and the manufacturing process had therefore to be collected and analysed. The foundry process was fixed but the secondary machining operations were analysed by a technique similar to Component Flow Analysis and as a result the machines were arranged in a series of flow lines. A system of manual production control was proposed and for comparison, a local computer bureau was approached and a system proposed incorporating the production of additional management information. These systems are compared and the relative merits discussed and a proposal made for implementation.

An investigation of production workers' performance variations and the potential impact of attitudes

In most manufacturing systems the contribution of human labour remains a vital element that affects overall performance and output. Workers’ individual performance is known to be a product of personal attitudes towards work. However, in current system design processes, worker performance variability is assumed to be largely insignificant and the potential impact of worker attitudes is ignored. This paper describes a field study that investigated the extent to which workers’ production task cycle times vary and the degree to which such variations are associated with attitude differences. Results show that worker performance varies significantly, much more than is assumed by contemporary manufacturing system designers and that this appears to be due to production task characteristics. The findings of this research and their implications are discussed.

Improving the design process for factories:modelling human performance variation

Theprocess of manufacturing system design frequently includes modeling, and usually, this means applying a technique such as discrete event simulation (DES). However, the computer tools currently available to apply this technique enable only a superficial representation of the people that operate within the systems. This is a serious limitation because the performance of people remains central to the competitiveness of many manufacturing enterprises. Therefore, this paper explores the use of probability density functions to represent the variation of worker activity times within DES models.

Gestão do sistema de produção e práticas enxutas adotadas nas indústrias paraibanas: um estudo multicaso

The evolution of the practices and strategies of manufacturing management, over the years, has made many companies realign their production systems in order to raise their competitiveness and operational performance. However, in most cases these changes are made in a heterogeneous manner, which ends up leaving the production system without a defined goal, which may end up damaging the managerial strategies of the organization as a whole. Thus, some organizations seek to use techniques and/or successful production practices used by other companies, believing can be able to reproduce the same results. An efficient production system must be fully planned and appropriate to the strategic objectives of the organization. Thus, this paper aims to identify the manufacturing management strategies adopted in paraibanas industries, as well as identify the lean practices used by them. Thus, a qualitative study was conducted, using as methodological basis the multicase study. Were made: direct observations, semi-structured interviews and questionnaires applied to those responsible by the production sector of the participating companies. As a result, it was possible to identify the type of manufacturing management system adopted by companies. Where it was detected that Company A uses a system of Modern Mass Production with focus on productivity and low cost and the Company B is using Lean Manufacturing system focused on quality and diversity. In the two organizations was possible to realize the application of lean practices where the Company what does not use the LM, possessed lean practices in standard extremely mature of utilization.