I. Impact spallation experiments: fracture patterns and spall velocities. II. Craters in carbonate rocks: an electron paramagnetic resonance analysis of shock damage

This work is divided into two independent papers.

PAPER 1.

Spall velocities were measured for nine experimental impacts into San Marcos gabbro targets. Impact velocities ranged from 1 to 6.5 km/sec. Projectiles were iron, aluminum, lead, and basalt of varying sizes. The projectile masses ranged from a 4 g lead bullet to a 0.04 g aluminum sphere. The velocities of fragments were measured from high-speed films taken of the events. The maximum spall velocity observed was 30 m/sec, or 0.56 percent of the 5.4 km/sec impact velocity. The measured velocities were compared to the spall velocities predicted by the spallation model of Melosh (1984). The compatibility between the spallation model for large planetary impacts and the results of these small scale experiments are considered in detail.

The targets were also bisected to observe the pattern of internal fractures. A series of fractures were observed, whose location coincided with the boundary between rock subjected to the peak shock compression and a theoretical "near surface zone" predicted by the spallation model. Thus, between this boundary and the free surface, the target material should receive reduced levels of compressive stress as compared to the more highly shocked region below.

PAPER 2.

Carbonate samples from the nuclear explosion crater, OAK, and a terrestrial impact crater, Meteor Crater, were analyzed for shock damage using electron para- magnetic resonance, EPR. The first series of samples for OAK Crater were obtained from six boreholes within the crater, and the second series were ejecta samples recovered from the crater floor. The degree of shock damage in the carbonate material was assessed by comparing the sample spectra to spectra of Solenhofen limestone, which had been shocked to known pressures.

The results of the OAK borehole analysis have identified a thin zone of highly shocked carbonate material underneath the crater floor. This zone has a maximum depth of approximately 200 ft below sea floor at the ground zero borehole and decreases in depth towards the crater rim. A layer of highly shocked material is also found on the surface in the vicinity of the reference bolehole, located outside the crater. This material could represent a fallout layer. The ejecta samples have experienced a range of shock pressures.

It was also demonstrated that the EPR technique is feasible for the study of terrestrial impact craters formed in carbonate bedrock. The results for the Meteor Crater analysis suggest a slight degree of shock damage present in the β member of the Kaibab Formation exposed in the crater walls.

Three-dimensional nonlinear inelastic analysis of steel moment-frame buildings damaged by earthquake excitations

The Northridge earthquake of January 17, 1994, highlighted the two previously known problems of premature fracturing of connections and the damaging capabilities of near-source ground motion pulses. Large ground motions had not been experienced in a city with tall steel moment-frame buildings before. Some steel buildings exhibited fracture of welded connections or other types of structural degradation.

A sophisticated three-dimensional nonlinear inelastic program is developed that can accurately model many nonlinear properties commonly ignored or approximated in other programs. The program can assess and predict severely inelastic response of steel buildings due to strong ground motions, including collapse.

Three-dimensional fiber and segment discretization of elements is presented in this work. This element and its two-dimensional counterpart are capable of modeling various geometric and material nonlinearities such as moment amplification, spread of plasticity and connection fracture. In addition to introducing a three-dimensional element discretization, this work presents three-dimensional constraints that limit the number of equations required to solve various three-dimensional problems consisting of intersecting planar frames.

Two buildings damaged in the Northridge earthquake are investigated to verify the ability of the program to match the level of response and the extent and location of damage measured. The program is used to predict response of larger near-source ground motions using the properties determined from the matched response.

A third building is studied to assess three-dimensional effects on a realistic irregular building in the inelastic range of response considering earthquake directivity. Damage levels are observed to be significantly affected by directivity and torsional response.

Several strong recorded ground motions clearly exceed code-based levels. Properly designed buildings can have drifts exceeding code specified levels due to these ground motions. The strongest ground motions caused collapse if fracture was included in the model. Near-source ground displacement pulses can cause columns to yield prior to weaker-designed beams. Damage in tall buildings correlates better with peak-to-peak displacements than with peak-to-peak accelerations.

Dynamic response of tall buildings shows that higher mode response can cause more damage than first mode response. Leaking of energy between modes in conjunction with damage can cause torsional behavior that is not anticipated.

Various response parameters are used for all three buildings to determine what correlations can be made for inelastic building response. Damage levels can be dramatically different based on the inelastic model used. Damage does not correlate well with several common response parameters.

Realistic modeling of material properties and structural behavior is of great value for understanding the performance of tall buildings due to earthquake excitations.

The isolation and partial biochemical analysis of Sindbis virus proteins

Recently, the amino acid sequences have been reported for several proteins, including the envelope glycoproteins of Sindbis virus, which all probably span the plasma membrane with a common topology: a large N-terminal, extracellular portion, a short region buried in the bilayer, and a short C-terminal intracellular segment. The regions of these proteins buried in the bilayer correspond to portions of the protein sequences which contain a stretch of hydrophobic amino acids and which have other common characteristics, as discussed. Reasons are also described for uncertainty, in some proteins more than others, as to the precise location of some parts of the sequence relative to the membrane.

The signal hypothesis for the transmembrane translocation of proteins is briefly described and its general applicability is reviewed. There are many proteins whose translocation is accurately described by this hypothesis, but some proteins are translocated in a different manner.

The transmembraneous glycoproteins E1 and E2 of Sindbis virus, as well as the only other virion protein, the capsid protein, were purified in amounts sufficient for biochemical analysis using sensitive techniques. The amino acid composition of each protein was determined, and extensive N-terminal sequences were obtained for E1 and E2. By these techniques E1 and E2 are indistinguishable from most water soluble proteins, as they do not contain an obvious excess of hydrophobic amino acids in their N-terminal regions or in the intact molecule.

The capsid protein was found to be blocked, and so its N-terminus could not be sequenced by the usual methods. However, with the use of a special labeling technique, it was possible to incorporate tritiated acetate into the N-terminus of the protein with good specificity, which was useful in the purification of peptides from which the first amino acids in the N-terminal sequence could be identified.

Nanomole amounts of PE2, the intracellular precursor of E2, were purified by an immuno-affinity technique, and its N-terminus was analyzed. Together with other work, these results showed that PE2 is not synthesized with an N-terminal extension, and the signal sequence for translocation is probably the N-terminal amino acid sequence of the protein. This N-terminus was found to be 80-90% blocked, also by Nacetylation, and this acetylation did not affect its function as a signal sequence. The putative signal sequence was also found to contain a glycosylated asparagine residue, but the inhibition of this glycosylation did not lead to the cleavage of the sequence.

Real-Time Bayesian Analysis of Ground Motion Envelopes for Earthquake Early Warning

Current earthquake early warning systems usually make magnitude and location predictions and send out a warning to the users based on those predictions. We describe an algorithm that assesses the validity of the predictions in real-time. Our algorithm monitors the envelopes of horizontal and vertical acceleration, velocity, and displacement. We compare the observed envelopes with the ones predicted by Cua & Heaton's envelope ground motion prediction equations (Cua 2005). We define a "test function" as the logarithm of the ratio between observed and predicted envelopes at every second in real-time. Once the envelopes deviate beyond an acceptable threshold, we declare a misfit. Kurtosis and skewness of a time evolving test function are used to rapidly identify a misfit. Real-time kurtosis and skewness calculations are also inputs to both probabilistic (Logistic Regression and Bayesian Logistic Regression) and nonprobabilistic (Least Squares and Linear Discriminant Analysis) models that ultimately decide if there is an unacceptable level of misfit. This algorithm is designed to work at a wide range of amplitude scales. When tested with synthetic and actual seismic signals from past events, it works for both small and large events.

Brand image and lexicographic analysis: an application to shopping malls

[EN] The concept of image in its different aspects is very important in today s society as well as in the business management field. Some authors reports that most of the studies that measure image do not take into account neither previous theoretical and conceptual models nor other possible empirical evidence alternatives. Given this need, a research regarding the concept of brand image applied to shopping malls was conducted based on the conceptual model of the consumer cognitive response in order to empirically explore and contrast it. For this reason, a survey was applied to 420 consumers in five shopping malls in Bogotá, achieving a database of 3.749 cases. The results show attribute-shopping mall associations expressed in unique, differentiated, and notorious vocabulary obtained applying lexicometric and multivariate analysis techniques. Attribute-shopping mall associations such as spacious , good location , good variety of stores , and the existence of movie theaters . Finally, this research aims to potentially improve the management of shopping malls and increase their attractiveness and customer loyalty by applying the development of service quality systems, integral communication, segmentation, and positioning.

Report on the analysis of salmon scale samples returned by anglers on the Rivers Ribble and Hodder

Fisheries technical staff from the North West Central Area of the National Rivers Authority (NRA) currently provide a service for the ageing of salmon scales from fish caught by anglers on the Rivers Ribble and Hodder in order to gather information on the biological characteristics of the salmon population on the River Ribble system in terms of weight, freshwater age and sea age. At the beginning of each fishing season, scale envelopes are distributed by the NRA to angling clubs and some individual anglers. Scales taken from salmon caught on the rivers are returned to the NRA Central Area Office by the anglers, or more often, by NRA bailiffs. The age of each fish caught is then determined by the identification and counting of annuli for both the river and sea zones on the scale. Information is provided by the angler on the scale packet concerning the length and weight of the fish caught, and the date, location and method of capture. Both this information and the age of the fish is recorded on a database. These data can be used to investigate the distribution, and exploitation patterns of the different age classes of the salmon stock within the river system. This report is principally concerned with the scale samples received in 1994, although comparison is also made with samples from 1993 and 1992. References to data will all relate to that received in 1994 unless an alternate year is stated.

Measurements of resistance and reactance in fish with the use of bioelectrical impedance analysis: sources of error

New technologies can be riddled with unforeseen sources of error, jeopardizing the validity and application of their advancement. Bioelectrical impedance analysis (BIA) is a new technology in fisheries research that is capable of estimating proximate composition, condition, and energy content in fish quickly, cheaply, and (after calibration) without the need to sacrifice fish. Before BIA can be widely accepted in fisheries science, it is necessary to identify sources of error and determine a means to minimize potential errors with this analysis. We conducted controlled laboratory experiments to identify sources of errors within BIA measurements. We concluded that electrode needle location, procedure deviations, user experience, time after death, and temperature can affect resistance and reactance measurements. Sensitivity analyses showed that errors in predictive estimates of composition can be large (>50%) when these errors are experienced. Adherence to a strict protocol can help avoid these sources of error and provide BIA estimates that are both accurate and precise in a field or laboratory setting.

Asymmetric conservation benefits of circle hooks in multispecies billfish recreational fisheries: a synthesis of hook performance and analysis of blue marlin (Makaira nigricans) postrelease survival

We evaluated the conservation benefits of the use of circle hooks compared with standard J hooks in the recreational fishery for Atlantic istiophorid billfishes, noting hooking location and the presence of trauma (bleeding) for 123 blue marlin (Makaira nigricans), 272 white marlin (Kajikia albida), and 132 sailfish (Istiophorus platypterus) caught on natural baits rigged with one of the two hook types. In addition, we used pop-up satellite archival tags (PSATs) to follow the fate of 61 blue marlin caught on natural baits rigged with circle hooks or on a combination of artificial lure and natural bait rigged with J hooks. The frequencies of internal hooking locations and bleeding were significantly lower with circle hooks than with J hooks for each of the three species and were significantly reduced for blue marlin caught on J hooks than for white marlin and sailfish taken on the same hook type. Analysis of the data received from 59 PSATs (two tags released prematurely) indicated no mortalities among the 29 blue marlin caught on circle hooks and two mortalities among the 30 blue marlin caught on J hooks (6.7%). Collectively, the hook location and PSAT data revealed that blue marlin, like white marlin and sailfish, derive substantial conservation benefits from the use of circle hooks, and the negative impacts of J hooks are significantly reduced for blue marlin relative to the other two species.

Factors influencing choice of fishing location in Nankumba Peninsula: A case of study of gillnet and chilimira fisheries

This study was carried out to identify factors that influence choice of fishing location and carry out profitability analysis of Chilimira and Gillnet in different fishing locations. A survey using semi-structured questionnaire was administered to 99 Gillnet and 101 Chilimira fishers in Nankumba Peninsula in Mangochi District. The logit model was used to determine the factors influencing choice of fishing location among the fishers. The study showed that 92.1% of Chilimira fishers are operating in offshore areas while 69.7% Gillnet fishers are operating in inshore areas. Chilimira offshore fishers have higher daily average gross margins than their inshore counterparts and Gillnet fishers. However, they incurred more operating costs than the inshore Chilimira and Gillnet fishers. Furthermore, they find their fishing occupation more rewarding as evidenced by the higher returns to labour. The factors that influenced fisher’s choice of fishing location were Age of the fisher, type of fishing vessel and gear, possession of motor sail engine and access to information about previous day’s catch rates. Finally the study concluded that artisanal fishers in Malawi use different criteria in deciding where to fish. The criterion involves a complex interaction of biological, technological, personal and economical factors and time. However, the resource constrained artisanal fisher will need support to enable him exploit offshore fishery resources. Consequently the study recommends that appropriate fishery development interventions by the government and other stakeholders must adapt to the economics and lifestyles driving the artisanal fishers to fish in particular locations and therefore, build on this foundation to improve the existing fishing technologies.

Sensitivity analysis of a time-delayed thermo-acoustic system via an adjoint-based approach

We apply adjoint-based sensitivity analysis to a time-delayed thermo-acoustic system: a Rijke tube containing a hot wire. We calculate how the growth rate and frequency of small oscillations about a base state are affected either by a generic passive control element in the system (the structural sensitivity analysis) or by a generic change to its base state (the base-state sensitivity analysis). We illustrate the structural sensitivity by calculating the effect of a second hot wire with a small heat-release parameter. In a single calculation, this shows how the second hot wire changes the growth rate and frequency of the small oscillations, as a function of its position in the tube. We then examine the components of the structural sensitivity in order to determine the passive control mechanism that has the strongest influence on the growth rate. We find that a force applied to the acoustic momentum equation in the opposite direction to the instantaneous velocity is the most stabilizing feedback mechanism. We also find that its effect is maximized when it is placed at the downstream end of the tube. This feedback mechanism could be supplied, for example, by an adiabatic mesh. We illustrate the base-state sensitivity by calculating the effects of small variations in the damping factor, the heat-release time-delay coefficient, the heat-release parameter, and the hot-wire location. The successful application of sensitivity analysis to thermo-acoustics opens up new possibilities for the passive control of thermo-acoustic oscillations by providing gradient information that can be combined with constrained optimization algorithms in order to reduce linear growth rates. © Cambridge University Press 2013.

Systematic misregistration and the statistical analysis of surface data.

Spatial normalisation is a key element of statistical parametric mapping and related techniques for analysing cohort statistics on voxel arrays and surfaces. The normalisation process involves aligning each individual specimen to a template using some sort of registration algorithm. Any misregistration will result in data being mapped onto the template at the wrong location. At best, this will introduce spatial imprecision into the subsequent statistical analysis. At worst, when the misregistration varies systematically with a covariate of interest, it may lead to false statistical inference. Since misregistration generally depends on the specimen's shape, we investigate here the effect of allowing for shape as a confound in the statistical analysis, with shape represented by the dominant modes of variation observed in the cohort. In a series of experiments on synthetic surface data, we demonstrate how allowing for shape can reveal true effects that were previously masked by systematic misregistration, and also guard against misinterpreting systematic misregistration as a true effect. We introduce some heuristics for disentangling misregistration effects from true effects, and demonstrate the approach's practical utility in a case study of the cortical bone distribution in 268 human femurs.

Analysis for temperature and pressure fields in process of hydrate dissociation by depressurization

An improved axisymmetric mathematic modeling is proposed for the process of hydrate dissociation by depressurization around vertical well. To reckon in the effect of latent heat of gas hydrate at the decomposition front, the energy balance equation is employed. The semi-analytic solutions for temperature and pressure fields are obtained by using Boltzmann-transformation. The location of decomposition front is determined by solving initial value problem for system of ordinary differential equations. The distributions of pressure and temperature along horizontal radiate in the reservoir are calculated. The numeric results indicate that the moving speed of decomposition front is sensitively dependent on the well pressure and the sediment permeability. Copyright (C) 2010 John Wiley & Sons, Ltd.

CFD analysis of thermodynamic cycles in a pulse tube refrigerator

The objectives of this paper are to study the thermodynamic cycles in an inertance tube pulse tube refrigerator (ITPTR) by means of CFD method The simulation results show that gas parcels working in different parts of ITPTR undergo different thermodynamic cycles The net effects of those thermodynamic cycles are pumping heat from the low temperature part to the high temperature part of the system The simulation results also show that under different frequencies of piston movement the gas parcels working in the same part of the system will undergo the same type of thermodynamic cycles The simulated thermal cycles are compared with those thermodynamic analysis results from a reference Comparisons show that both CFD simulations and theoretical analysis predict the same type of thermal cycles at the same location However only CFD simulation can give the quantitative results while the thermodynamic analysis is still remaining in quality (C) 2010 Elsevier Ltd All rights reserved

Domain analysis of the Edwardsiella tarda ferric uptake regulator

Recent studies have shown that the ferric uptake regulator (Fur) of Edwardsiella tarda (Fur(Et)) shares high sequence identity with the Escherichia coli Fur (Fur(Ec)) at the N-terminal DNA-binding region. In the present study, the functional importance of the C-terminal region of Fur(Et) was investigated. It was found that Fur(Et) bearing deletion of the C-terminal 12 residues still possesses most of the repressor activity, whereas Fur(Et) bearing deletions of the C-terminal 16 and more than 16 residues are severely affected in activity. Domain swapping analyses indicated that the chimeric Fur proteins (Et75Ec73 and Et75Vh74) consisting of the N-terminal 1-75 region of Fur(Et) fused to the C-terminal 76-148 region of Fur(Ec) and the C-terminal 76-149 region of the Vibrio harveyi Fur (Fur(Vh)), respectively, are fully active. C92 of Fur(Ec) and C137 of Fur(Vh), which are functionally essential in Fur(Ec) and Fur(Vh), respectively, are also essential in Et75Ec73 and Et75074, respectively. Further study identified an artificial Fur protein, EtMF54, which is composed of the N-terminal 49 residues of Fur(Et) and five artificial residues. Compared to Fur(Et), EtMF54 possesses partial Fur activity that is iron-dependent. These results (I) indicate that there exist certain functional/structural compatibilities among Fur(Et), Fur(Ec), and Fur(Vh) at the C-terminal region; (ii) provide insights to the potential location of the regulatory ion-binding site of Fur(Et).

Preliminary analysis of grain-size populations with environmentally sensitive terrigenous components in marginal sea setting

Terrigenous components were separated from the bulk sediment of Core A7 from the Okinawa Trough and Core A37 from the Ryukru Trench and grain-size distributions of these sub-samples were analyzed. Based upon an analysis of the grain-size data of the two sedimentary sequences, grain-size populations are identified to be sensitive to sedimentary environmental changes. The modal values and size ranges of the two main grain-size populations in Core A7 are evidently different from those of Core A37, indicating the spatial variability of sediment sources and transport processes between the two places. The downcore variations in the content of the environmentally sensitive grain-size populations reveal that during the accumulation of sedimentary material the environment remained relatively stable at the site where Core A7 was collected, except for the apparent events for the formation of two turbidite layers and a volcanic ash layer. However, the sedimentary sequence of Core A37 shows six sedimentary cycles, indicating a highly variable sedimentary environment at this location.