Sustainable development: changing production patterns, social equity and the environment

Includes bibliography

Knowledge-based integrated Production Management Model applied to automotive companies

This paper aims to examine the relevance of a production management model, in the shop-floor operations environment, that integrates the dimensions of production organisation (lean and mass production), work organisation (enriched and semi-autonomous groups) and knowledge management. A theoretical model has been applied to automotive companies to verify model adherence. Each of those dimensions has been described by factors. Shop-floor personnel interviews were conducted to confirm the factors relevance to that company. Results have shown that the model represented the reality of those companies concerning the researched dimensions. The factors allow managers to promote a favourable context for knowledge sharing. © 2010 Inderscience Enterprises Ltd.

Environmental management and operational performance in automotive companies in Brazil: The role of human resource management and lean manufacturing

The main objective of this study is to verify the influence of Environmental Management (EM) on Operational Performance (OP) in Brazilian automotive companies, analyzing whether Lean Manufacturing (LM) and Human Resources (HR) interfere in the greening of these companies. Therefore, a conceptual framework listing these concepts was proposed, and three research hypotheses were presented. A questionnaire was elaborated based on this theoretical background and sent to respondents occupying the highest positions in the production/operations areas of Brazilian automotive companies. The data, collected from 75 companies, were analyzed using structural equation modeling. The main results are as follows: (a) the model tested revealed an adequate goodness of fit, showing that overall, the relations proposed between EM and OP and between HR, LM and EM tend to be statistically valid; (b) EM tends to influence OP in a positive and statistically weak manner; (c) LM has a greater influence on EM when compared to the influence HR has over EM; (d) HR has a positive relationship over EM, but the statistical significance of this relationship is less than that of the other evaluated relationships. The originality of this paper lies in its gathering the concepts of EM, LM, HR and OP in a single study, as they generally tend not to be treated jointly. This paper also provided valid empirical evidence for a littlestudied context: the Brazilian automotive sector. © 2012 Elsevier Ltd. All rights reserved.

Otimização do processo de MRP (Material Requirement Planning) de embalagens: uma aplicação da metodologia lean six sigma em uma indústria de agronegócios

There is a growing search for continuous improvement within the companies which creates an obligation of reducing and when it is possible eliminating waste. Production Planning and Control Department (PCP) is not out of this question, making necessary the application of methods and creation of tools that eliminate steps which do not add value to the planning process. This paper aims to develop a tool which concentrates in just one place all the necessary information to make the packaging material requirement planning (MRP) in a agribusiness company. Besides, it also aims, in a more visual way and using devices that prevent mistakes (Poka-Yoke), to reduce the number of reviews and mistakes made by analysts. As a result, an Excel spreadsheet was developed. This spreadsheet shows what happens with the status of planning and receiving of packaging, giving some advices when some critical situation happens. The use of Lean Manufacturing Method and the action research method helped to well define the problem and to reduce the number of steps, spreadsheets and time of process in 80%, 60% and 75%, respectively

Utilização de 5S, Kanban e Layout para a melhoria do controle de estoque em um varejo de materiais para construção

Many small businesses suffer from a lack of control of goods stored. This lack of control affects other areas of the company as purchase, that can’t buy material in an advanced and accurated way. It also affects services provided by the company, especially when it is a store because for sell something it is necessary to have the material in the right time. Futhermore, the business isn’t able to identify obsolete items in stock, theft and vandalism, loss or damage to materials. All of these disorders can be converted into financial losses that make much difference to a small business that needs to remain competitive in the market facing the giants while generating a profit that allows it to invest in their growth. Therefore, any unnecessary expense is exceedingly harmful and any savings already differentiates it from other companies of similar size. This study deals with the application of production engineering tools as 5S, kanban and layout in a building materials retail to tackle problems that prevent this company to have a stock organized and accurated. Finally, we recorded gains that the company reached with the implementation of part of the solution proposed

Lean Six sigma aplicado a uma empresa do setor de embalagens

With the advent of a global economy, Lean Six Sigma meets the demand of new production process that creates products within the customer’s specification without any wastage. The objectives of this work is to use the concepts Lean Manufacturing and Six Sigma parallel to minimize costs, increase the customer base, reduce the delivery time which implies an increase in the turnover of products on the shelves in a packaging company. We used the DMAIC method to continue working. The method DMAIC indicated the main failure modes that were fixed in the step improve. At this stage the tools of Lean Manufacturing gain tremendous value by optimizing processes with defects. The conclusion involves an increase in monthly billing, a corporate restructuring and, finally, a renewal in how to conduct the work of management

Aplicação do lean six sigma na linha de produção de turbinas industriais a vapor

This work evaluates the implementation of Lean Six Sigma into the Steam Turbine’s Blades Manufacturing Process, aiming to improve productivity, quality and operational efficiency. Therefore, several tools have been applied, such as VSM, Spaghetti Diagram, Ishikawa, Pareto, DMAIC, Benchmarking and Control Charts, seeking to propose process improvements, as well as Quality Indicators creation. It was obtained a significant waste reduction throughout the process, achieving a lead time reduction of 42% and 83,41% in transport. Also, were introduced the Lean Thinking concepts, such as pull production and Continuous material flow. At the same time, it was possible to calculate the process capability and the sigma level, evaluating and proposing some improvements

Análise doprojeto de expansãode um armazém por meio da elaboração de um layout e análise de investimento: estudo de caso em uma fábrica do setor alimentício

The proper management of materials storage is essential to supply the needs of production and reduce the inventory costs. Moreover, an effective layout contributes to improve the productivity and reduce the operational costs of a warehouse. This way, the purpose of this study was: to propose an expansion project to the warehouse of a factory in the food sector, suggesting a layout that best fit their needs and to verify its economic feasibility. To achieve this goal, it was applied methods such as ABC curve, spaghetti diagram and concepts of economics engineering to the analysis of investment in the project. The results showed that the second layout model was better than the first, supporting the storage capacity required by the company and presenting an internal movement more efficient. However, with the investment analysis, it was found that it was not feasible, given the conditions of the company, investing in the expansion of the warehouse

A aplicação da teoria do lean seis sigma na prestação de serviços no setor agrícola

This thesis aims to analyze the applicability of Lean Six Sigma and DMAIC to improve processes focused on agriculture. We discuss the origins of each system separately, Lean Manufacturing, the Toyota plants in Japan, and Six Sigma, by Motorola in the U.S., and then appears to merge them and can meet their complementarities and synergy between their tools. Finally, we describe a case study focused on the harvesting department, applicable to all types of manuals crops, covering the production of fruits, vegetables and greens. This study shows the ability to reduce costs, increase productivity and elimination of defects that the methodology developed with the fusion of Lean Manufacturing with Six Sigma allows

Implementação da metodologia lean manufacturing em uma linha de produção por meio de certificação interna

To the companies maintain competitive in the market, they need continuous improvement in quality and productivity. This continuous improvement can be achieved through lean manufacturing tools. The idea of lean manufacturing is to map the flow to identify the processes that don’t add value in the final product, according the customer specification, in others words is eliminate or reduce the waste on the production flow. However the implementation of lean manufacturing is not so simple and involves the resistance of the employees, lack of training and the lack of knowledge to make the implementation. The objective of this study is determinate the good practices and difficulties found by a multinational company in the field of healthy that aims implementing the Lean Manufaturing through an internal certification. The methodology used to approach the problem is a case of study that analyzes the information introduced through discussion made by a semi structured interview. The case study describes the steps to get the certification, involving the concepts of 5S, balancing, standardization and routine management. The literature and the study case showed that the good practices, such as productivity increases, safety level increases and the machine stability were accomplished, but the majority difficulties was found in cultural factors and planning. Some recommendations were proposed to the others companies, such as the elaboration of a qualification matrix and the review of the activities chronogram during the implementation. The way that the company found to implement Lean Manufacturing concepts was a creative method to show to everybody the objective and the target to be accomplished and is one way to recognize the effort through the certification

Planejamento e controle da produção: reestruturação no layout de apertadeiras eletrônicas em uma linha de produção do ramo de autopeças

In industrial plants, there is a department responsible for planning the use of productive resources to find the best possible way to set out plans in strategic, tactical and operational levels. This department is known as PCP or PPCP, which means Planning and Production Control and Planning, Programming and Production Control, respectively. This work presents the use of some of the tools from this department, in particular the Aggregate Production Planning, to propose a new layout of electronic nutrunners for an auto parts industry output line. Through some process indicators analyzes, was identified some productivity losses. The higher loss rate occurred by the electronic nutrunners breaking, and so this work was focused in these devices. Some premises were adopted for the use of electronic nut runners, setting an ideal cycle time for the operation of the production line and making calculations to define the minimum amount of electronic nutrunners to find the production demand without damaging the equipment. With this work we observed that a relevant factor for the constant breaks of electronic nutrunners is because these are working with overload, in other words, the amount of installed equipment is not enough to supply the demand without failures

Aumento de produtividade em uma célula produtiva com processo de usinagem utilizando conceitos Lean

In the current competitive and global scenario, companies in search for solutions that become the production every time more efficient is increasing and at the same time cost reductions and cost eliminations are becoming increasingly evident and needed. In an attempt to improve production, this work aims to compare benefits obtained using principles of philosophy Lean Manufacturing in an productivity growth of a cell from an auto parts sector industry. For that purpose it will be studied the history, the concepts and the tools of philosophy Lean Manufacturing, thus using the as a business-strategic tool to accomplish goals that the company expects to get greater competitiveness and quality. The efficiency of philosophy Lean Manufacturing was already confirmed through applying the concepts in the process which has been improved inside an auto parts sector industry. At last, comparative analyzes showed benefits obtained with the use of Lean Manufacture tool called VSM, Value Stream Map, which translates the Value Stream Map of a particular family of parts as the identification, minimization and elimination of waste identified

Plano para implementação dos princípios lean manufacturing em microempresas alimentícias

Nowadays, being prepared for competition is a basic demand for companies to survive and expand their businesses, requiring more and more productivity enhancements and costs reductions without interfering in the products quality. Thus, it is very important to have a solid management system adapted to each specific market and industrial sector. With that, many companies invest in studies to optimize its processes aiming to increase production. This work has the goal to present a deployment plan to Lean Manufacturing principles on a small fast food enterprise. The methodology consisted on a bibliographic research followed by an observation of the daily reality and problems found in loco. The study showed that the Lean principles can be a competitive advantage when applying the plan on new processes and enable changes on old methods already implemented by the organization. Besides that, contribute to a productivity enhancement and consequently the employee's motivation

Proposta de melhoria do layout de um armazém de vidros automotivos

This work was based on a case study of improvement of the warehouse layout of a multinational automotive glass sector, located in the State of Sao Paulo. The aim was to propose a layout template to be more effective and besides optimizing production would also promote an increase in warehouse packaging capacity for metal containers containing glasses, thus reducing operating costs. To achieve the desired purpose, it was developed two layout proposals and to this end inventory management tools have been used, such as ABC curve and the Spaghetti Diagram, and other concepts of Packaging Engineering and Logistics. By the end of this work, it was obtained as a result, a project in which it was possible to rearrange the packages according the demand, and the developed changes became the most efficient layout both in storage capacity as well as in the internal drive

Lean construction como estratégia para melhorias em canteiros de obras: uma revisão sistemática na literatura nacional

Pós-graduação em Engenharia de Produção - FEB