Detecting, quantifying and adjusting for publication bias in meta-analyses: protocol of a systematic review on methods.

BACKGROUND: Health professionals and policymakers aspire to make healthcare decisions based on the entire relevant research evidence. This, however, can rarely be achieved because a considerable amount of research findings are not published, especially in case of 'negative' results - a phenomenon widely recognized as publication bias. Different methods of detecting, quantifying and adjusting for publication bias in meta-analyses have been described in the literature, such as graphical approaches and formal statistical tests to detect publication bias, and statistical approaches to modify effect sizes to adjust a pooled estimate when the presence of publication bias is suspected. An up-to-date systematic review of the existing methods is lacking. METHODS/DESIGN: The objectives of this systematic review are as follows:âeuro¢ To systematically review methodological articles which focus on non-publication of studies and to describe methods of detecting and/or quantifying and/or adjusting for publication bias in meta-analyses.âeuro¢ To appraise strengths and weaknesses of methods, the resources they require, and the conditions under which the method could be used, based on findings of included studies.We will systematically search Web of Science, Medline, and the Cochrane Library for methodological articles that describe at least one method of detecting and/or quantifying and/or adjusting for publication bias in meta-analyses. A dedicated data extraction form is developed and pilot-tested. Working in teams of two, we will independently extract relevant information from each eligible article. As this will be a qualitative systematic review, data reporting will involve a descriptive summary. DISCUSSION: Results are expected to be publicly available in mid 2013. This systematic review together with the results of other systematic reviews of the OPEN project (To Overcome Failure to Publish Negative Findings) will serve as a basis for the development of future policies and guidelines regarding the assessment and handling of publication bias in meta-analyses.

Fingermark initial composition and aging using Fourier transform infrared microscopy (μ-FTIR)

This study investigated fingermark residues using Fourier transform infrared microscopy (μ- FTIR) in order to obtain fundamental information about the marks' initial composition and aging kinetics. This knowledge would be an asset for fundamental research on fingermarks, such as for dating purposes. Attenuated Total Reflection (ATR) and single-point reflection modes were tested on fresh fingermarks. ATR proved to be better suited and this mode was subsequently selected for further aging studies. Eccrine and sebaceous material was found in fresh and aged fingermarks and the spectral regions 1000-1850 cm-1 and 2700-3600 cm-1 were identified as the most informative. The impact of substrates (aluminium and glass slides) and storage conditions (storage in the light and in the dark) on fingermark aging was also studied. Chemometric analyses showed that fingermarks could be grouped according to their age regardless of the substrate when they were stored in an open box kept in an air-conditioned laboratory at around 20°C next to a window. On the contrary, when fingermarks were stored in the dark, only specimens deposited on the same substrate could be grouped by age. Thus, the substrate appeared to influence aging of fingermarks in the dark. Furthermore, PLS regression analyses were conducted in order to study the possibility of modelling fingermark aging for potential fingermark dating applications. The resulting models showed an overall precision of ±3 days and clearly demonstrated their capability to differentiate older fingermarks (20 and 34-days old) from newer ones (1, 3, 7 and 9-days old) regardless of the substrate and lighting conditions. These results are promising from a fingermark dating perspective. Further research is required to fully validate such models and assess their robustness and limitations in uncontrolled casework conditions.

Liquid transportation and distribution during (re)wetting : impact on coated papers in printing

In many industrial applications, such as the printing and coatings industry, wetting of porous materials by liquids includes not only imbibition and permeation into the bulk but also surface spreading and evaporation. By understanding these phenomena, valuable information can be obtained for improved process control, runnability and printability, in which liquid penetration and subsequent drying play important quality and economic roles. Knowledge of the position of the wetting front and the distribution/degree of pore filling within the structure is crucial in describing the transport phenomena involved. Although exemplifying paper as a porous medium in this work, the generalisation to dynamic liquid transfer onto a surface, including permeation and imbibition into porous media, is of importance to many industrial and naturally occurring environmental processes. This thesis explains the phenomena in the field of heatset web offset printing but the content and the analyses are applicable in many other printing methods and also other technologies where water/moisture monitoring is crucial in order to have a stable process and achieve high quality end products. The use of near-infrared technology to study the water and moisture response of porous pigmented structures is presented. The use of sensitive surface chemical and structural analysis, as well as the internal structure investigation of a porous structure, to inspect liquid wetting and distribution, complements the information obtained by spectroscopic techniques. Strong emphasis has been put on the scale of measurement, to filter irrelevant information and to understand the relationship between interactions involved. The near-infrared spectroscopic technique, presented here, samples directly the changes in signal absorbance and its variation in the process at multiple locations in a print production line. The in-line non-contact measurements are facilitated by using several diffuse reflectance probes, giving the absolute water/moisture content from a defined position in the dynamic process in real-time. The nearinfrared measurement data illustrate the changes in moisture content as the paper is passing through the printing nips and dryer, respectively, and the analysis of the mechanisms involved highlight the roles of the contacting surfaces and the relative liquid carrier properties of both non-image and printed image areas. The thesis includes laboratory studies on wetting of porous media in the form of coated paper and compressed pigment tablets by mono-, dual-, and multi-component liquids, and paper water/moisture content analysis in both offline and online conditions, thus also enabling direct sampling of temporal water/moisture profiles from multiple locations. One main focus in this thesis was to establish a measurement system which is able to monitor rapid changes in moisture content of paper. The study suggests that near-infrared diffuse reflectance spectroscopy can be used as a moisture sensitive system and to provide accurate online qualitative indicators, but, also, when accurately calibrated, can provide quantification of water/moisture levels, its distribution and dynamic liquid transfer. Due to the high sensitivity, samples can be measured with excellent reproducibility and good signal to noise ratio. Another focus of this thesis was on the evolution of the moisture content, i.e. changes in moisture content referred to (re)wetting, and liquid distribution during printing of coated paper. The study confirmed different wetting phases together with the factors affecting each phase both for a single droplet and a liquid film applied on a porous substrate. For a single droplet, initial capillary driven imbibition is followed by equilibrium pore filling and liquid retreat by evaporation. In the case of a liquid film applied on paper, the controlling factors defining the transportation were concluded to be the applied liquid volume in relation to surface roughness, capillarity and permeability of the coating giving the liquid uptake capacity. The printing trials confirmed moisture gradients in the printed sheet depending on process parameters such as speed, fountain solution dosage and drying conditions as well as the printed layout itself. Uneven moisture distribution in the printed sheet was identified to be one of the sources for waving appearance and the magnitude of waving was influenced by the drying conditions.

Hot tool temperature analysis though infrared images

Textile manufacture occupies a prominent place in the national economy. Because of its importance researches have been made on the development of new materials, equipment and methods used in the production process. The cutting of textiles starts in the basic stage, to be followed by the process of the making of clothes and other articles. In the hot cutting of fabric, one of the variables of great importance in the control of the process is the contact temperature between the tool and the fabric. This work presents a technique for the measurement of the temperature based on the processing of infrared images. With this purpose, it was developed a system which is composed of an infrared camera, a framegrabber PC board and a software which analyses the punctual temperature in the cut area enabling the operator to achieve the necessary control of other variables involved in the process.

The normal co-ordinate analysis, vibrational spectra and theoretical infrared intensities of some thiocarbonyl halide molecules /

TITLE: The normal co-ordinate analysis, vibrational spectra and theoretical infrared intensities of some thiocarbonyl halides. AUTHOR: J. L. Brema SUPERVISOR: Dr. D. C. Moule NUMBER OF PAGES: 89 ABSTRACT: The vibrational assignment of the five-in-plane fundamental modes of CSClBr has been made on the basis of infrared gas phase and liquid Raman spectral analyses to supplement our earlier vibrational studies. Even though the one out-of-plane fundamental was not observed spectroscopically an attempt has been made to predict its frequency. The vibrational spectra contained impurity bands and the CSClBr assignment was made only after a thorough analysis of the impurities themselves. A normal co-ordinate analysis calculation was performed assuming a Urey-Bradley force field. This calculation yielded the fundamental frequencies in good agreement with those observed after refinement of the originally transferred force constants. The theoretical frequencies are the eigenvalues of the secular equation and the calculation also gave the corresponding eigenvectors in the form of the very important LLj matrix. The [l] matrix is the transfoirmation between internal co-ordinates and normal co-ordinates and it is essential for Franck-Condon calculations on electronically excited molecules and for infrared Integrated band intensity studies. Using a self-consistent molecular orbital calculation termed "complete neglect of differential overlap" (CNDO/2) , theoretical values of equilibrium bond lengths and angleswere calcuted for a series of carbonyl and thlocarbonyl molecules. From these calculations valence force field force constants were also determined but with limited success. With the CNIX)/2 method theoretical dipole moment derivatives with respect to symmetrized internal co-ordinates were calculated and the results should be useful in a correlation with experimentally determined values.

Far infrared optical properties of V and Cr doped Sb2Te3 /

The far infrared reflectance of Sb2Te3 , Sbi.97Vo.o3Te3 and Sbi.94Cr .o6Te3 was measured near normal incidence at different temperatures (between 45K and 300K). The direct current resistivities of the above samples were also measured between the temperatures of 4K and 300K. Also Kramers Kronig (KK) analyses were performed on the reflectance spectra to obtain the optical conductivities. In the doped samples, it was observed that a phonon at 62cm-1 softens to about 55cm-1 on decreasing the temperature from 295K to 45K. Also, it was observed that the plasma frequency of the doped samples is independent of doping. The scattering rate for the vanadium doped sample was seen to be greater than that for the chromium doped sample despite the fact that vanadium impurity density is less than that of chromium. The Drude-Lorentz model fits to the KK optical conductivity show that the samples used in this work are conventional metals. Definitive measurements of the temperature dependence of the scattering rate across the ferromagnetic transition await equipment changes allowing measurements at low temperature using the mercury cadmium telluride (MCT) detector.

Far-infrared optical properties of the heavy fermion superconductor UB[E13]

Temperature dependent resistivity, p, magnetic susceptibility, X, and far-infrared reflectance measurements were made on the low Tc superconductor UBe13. Two variants of UBe13 have been proposed, named 'L'- (for low Tc ) and 'H'-type (for high Tc ). Low temperature resistivity measurements confirmed that our sample was of H-type and that the transition temperature was at 0.9 K. This was further confirmed with the observation of this transition in the AC-susceptibility. Low temperature reflectance measurements showed a decrease in the reflectivity as the temperature is lowered from 300 to 10 K, which is in qualitative agreement with the increasing resistivity in this temperature range as temperature is lowered. No dramatic change in the reflectivity was observed between 10 and 0.75 K. A further decrease of the reflectance was observed for the temperature of 0.5 K. The calculated optical conductivity shows a broad minimum near 80 cm-1 below 45 K. Above 45 K the conductivity is relatively featureless. As the temperature is lowered, the optical conductivity decreases. The frequency dependent scattering rate was found to be flat for temperatures between 300 and 45 K. The development of a peak, at around 70 cm-1 was found for temperatures of 45 K and below. This peak has been associated with the energy at which the transition to a coherent state occurs from single impurity scattering in other heavy fermion systems. The frequency dependent mass enhancement coefficient was found to increase at low frequencies as the frequency decreases. Its' magnitude as frequency approaches zero also increased as the temperature decreased.

The effect of age on the structure and compostition of the cell walls of Choanephora cucurbitarum

The effect of age on the structure and composition of isolated and purified cell walls from cultures of Choanephora cucurbitarum was investigated by microchemical analyses, visible and infrared spectrophotometry, x-ray diffractometry and electron microscopy. Qualitative evaluation revealed the presence of lipids, proteins, neutral sugars, strong alkali soluble sugars, chitin, chitosan and uronic acids in the cell walls of both the 1 and 7 day old cultures. As the mycelium aged, there was a slight but statistically significant increase in the protein content, and a pronounced rise in the chitin and neutral sugar constituents of the cell walls. Conversely, the decrease in the chitosan content during this period had the net effect of altering the chitin: chitosan ratio from near unity in the younger cultures, to a 2:1 ratio in the 7 day old cell wall samples. Glutaraldehyde-osmium fixed thin sections of the 1 day old vegetative hyphae of £. curbitarum revealed the presence of a monolayered cell wall, which upon aging became bilayered. Replicas of acid hydrolysed cell walls demonstrated that both the 1 and 7 day old samples possessed an outer layer which was composed of finely granular amorphous material and randomly distributed microfibrils. The deposition of an inner secondary layer composed of parallel oriented microfibrils in the older hypha was correlated with an increase in the chitin content in the cell wall. The significance of these results with respect to the intimate relationship between composition and structure is discussed.

Pauvreté, criminalité et problèmes de santé mentale : une évaluation qualitative et quantitative des interventions communautaires et policières dans un taudis mal famé

L'analyse quantitative a été réalisée en cotutelle avec Rémi Boivin et Pierre Tremblay et publiée dans la Revue de Criminologie: Boivin, R., Lamige, C,. Tremblay, P. (2009) La police devrait-elle cibler les taudis malfamés? Criminologie, (42)1, 225-266.

Jeux d'acteurs et enchevêtrement des vecteurs d'action : sociologie qualitative et approche interdisciplinaire du processus de patrimonialisation de l’usine de Paulilles devenue «site classé»

Thèse réalisée en cotutelle avec l'Université de Perpignan Via Domitia (UPVD), France.

A qualitative study of curriculum and instructional efforts in relation to high stakes federal and district policies in one low-performing elementary school

Les enjeux liés aux politiques éducatives ont considérablement changé au cours des dernières décennies. Ces changements sont liés, entre autres, à l’accroissement de l’imputabilité et de la reddition de compte qui est devenue une caractéristique importante des réformes curriculaires et pédagogiques. Les politiques à enjeux élevés exercent une pression énorme sur les districts et les écoles états-unienne afin qu’ils augmentent le rendement des élèves en utilisant des systèmes de conséquences (Hall & Ryan, 2011; Loeb & Strunk, 2007). Ces politiques envoient de puissants messages sur l'importance de certaines matières scolaires au détriment d'autres - circonscrivant les exigences en termes de compétences et de connaissances. La langue maternelle d’enseignement et les mathématiques sont devenues des mesures centrales sur lesquelles reposent l’évaluation et le degré de performance des districts et des écoles. Conséquemment, les administrateurs de districts et les directions d’écoles ont souvent recours à des réformes curriculaires et pédagogiques comme moyen d'augmenter le rendement des élèves dans les matières scolaires visées par ces politiques. Les politiques contraignent les acteurs scolaires de concentrer les ressources sur les programmes curriculaires et les évaluations, le développement professionnel, et la prise de décision pilotée par les données (Anagnostopoulos & Ruthledge, 2007; Honig & Hatch, 2004; Spillane, Diamond, et al., 2002; Weitz White & Rosenbaum, 2008). Cette thèse examine la manière dont les politiques à enjeux élevés opèrent quotidiennement dans les interactions et les pratiques au sein des écoles. Nous analysons plus particulièrement les différents messages provenant de la politique transmis aux acteurs scolaires sur les manières d'apporter des changements substantiels dans le curriculum et l'enseignement. Nous élargissons l’analyse en prenant en compte le rôle des administrateurs de district ainsi que des partenaires universitaires qui façonnent également la manière dont certains aspects des messages provenant des politiques sont transmis, négociés et/ou débattus et d’autres sont ignorés (Coburn & Woulfin, 2012). En utilisant l’analyse de discours, nous examinons le rôle du langage comme constituant et médiateur des interactions sociales entre les acteurs scolaires et d’autres parties prenantes. De telles analyses impliquent une investigation approfondie d’un nombre d’étude de cas limité. Les données utilisées dans cette thèse ont été colligées dans une école primaire états-unienne du mid-West. Cette étude de cas fait partie d’une étude longitudinale de quatre ans qui comprenait huit écoles dans les milieux urbains entre 1999 et 2003 (Distributed Leadership Studies, http://www.distributedleadership.org). La base de données analysée inclut des observations de réunions formelles et des entrevues auprès des administrateurs du district, des partenaires universitaires, de la direction d’école et des enseignants. En plus de l’introduction et de la problématique (chapitre 1) et de discussion et conclusion (chapitre 5), cette thèse comprend un ensemble de trois articles interdépendants. Dans le premier article (chapitre 2), nous effectuons une recension des écrits portant sur le domaine de l’implantation de politiques (policy implementation) et la complexité des relations locales, nationales et internationales dans les systèmes éducatifs. Pour démystifier cette complexité, nous portons une attention particulière à la construction de sens des acteurs scolaires comme étant une dimension clé du processus de mise en œuvre des réformes. Dans le deuxième article (chapitre 3), nous cherchons à comprendre les processus sociaux qui façonnent les réponses stratégiques des acteurs scolaires à l’égard des politiques du district et de l’état et en lien avec la mise en œuvre d’un curriculum prescrit en mathématiques. Plus particulièrement, nous explorons les différentes situations dans lesquelles les acteurs scolaires argumentent au sujet des changements curriculaires et pédagogiques proposés par les administrateurs de district et des partenaires universitaires afin d’augmenter les résultats scolaires en mathématiques dans une école à faible performance. Dans le troisième article (chapitre 4), nous cherchons à démystifier les complexités liées à l’amélioration de l’enseignement dans un environnement de politiques à enjeux élevés. Pour ce faire, nous utilisons l'interaction entre les notions d'agentivité et la structure afin d'analyser la manière dont les conceptions d’imputabilité et les idées qui découlent de l'environnement politique et les activités quotidiennes jouent dans les interactions entre les acteurs scolaires concernant sur l’enseignement de la langue maternelle. Nous explorons trois objectifs spécifiques : 1) la manière dont les politiques à enjeux élevés façonnent les éléments de l’enseignement qui sont reproduits et ceux qui sont transformés au fil du temps ; 2) la manière dont la compréhension des leaders de l’imputabilité façonne les aspects des messages politiques que les acteurs scolaires remarquent à travers les interactions et les conversations et 3) la manière les acteurs scolaires portent une attention particulière à certaines messages au détriment d’autres. Dans le dernier chapitre de cette thèse, nous discutons les forces et les limites de l’analyse secondaire de données qualitatives, les implications des résultats pour le domaine d’études de l’implantation de politiques et les pistes futures de recherches.

Studies on molecular structure and properties using microwave and infrared spectral data

The major objective of the thesis is essentially to evolve and apply certain computational procedures to evaluate the structure and properties of some simple polyatomic molecules making use of spectroscopic data available from the literature. It must be said that though there is dwindling interest in recent times in such analyses, there exists tremendous scope and utility for attempting such calculations as the precision and reliability of'experimental techniques in spectroscopy have increased vastly due to enormous sophistication of the instruments used for these measurements. In the present thesis an attempt is made to extract maximum amount of information regarding the geometrical structure and interatmic forces of simple molecules from the experimental data on microwave and infrared spectra of these molecules

Predictors of knowledge creation performance. A quantitative qualitative comparative study of European doctorandi

Aquesta tesi forma part d'un projecte destinat a predir el rendiment acadèmic dels estudiants de doctorat portat a terme per l'INSOC (International Network on Social Capital and Performance). El grup de recerca INSOC està format per les universitats de Girona (Espanya), Ljubljana (Eslovènia), Giessen (Alemanya) i Ghent (Bèlgica). El primer objectiu d'aquesta tesi és desenvolupar anàlisis quantitatius comparatius sobre el rendiment acadèmic dels estudiants de doctorat entre Espanya, Eslovènia i Alemanya a partir dels resultats individuals del rendiment acadèmic obtinguts de cada una de les universitats. La naturalesa internacional del grup de recerca implica la recerca comparativa. Vam utilitzar variables personal, actitudinals i de xarxa per predir el rendiment. El segon objectiu d'aquesta tesi és entendre de manera qualitativa perquè les variables de xarxa no ajuden quantitativament a predir el rendiment a la universitat de Girona (Espanya). En el capítol 1, definim conceptes relacionats amb el rendiment i donam un llistat de cada una de les variables independents (variables de xarxa, personals i actitudinals), resumint la lliteratura. Finalment, explicam com s'organitzen els estudis de doctorat a cada un dels diferents països. A partir d'aquestes definicions teòriques, en els pròxims capítols, primer presentarem els qüestionaris utilitzats a Espanya, Eslovènia i Alemanya per mesurar aquests diferents tipus de variables. Després, compararem les variables que són relevants per predir el rendiment dels estudiants de doctorat a cada país. Després d'això, fixarem diferents models de regressió per predir el rendiment entre països. En tots aquests models les variables de xarxa fallen a predir el rendiment a la Universitat de Girona. Finalment, utilitzem estudis qualitatius per entendre aquests resultats inesperats. En el capítol 2, expliquem com hem dissenyat i conduït els qüestionaris en els diferents països amb l'objectiu d'explicar el rendiment dels estudiants de doctorat obtinguts a Espanya, Eslovènia i Alemanya. En el capítol 3, cream indicadors comparables però apareixen problemes de comparabilitat en preguntes particulars a Espanya, Eslovènia i Alemanya. En aquest capítol expliquem com utilitzem les variables dels tres països per crear indicadors comparables. Aquest pas és molt important perquè el principal objectiu del grup de recerca INSOC és comparar el rendiment dels estudiants de doctorat entre els diferents països. En el capítol 4 comparem models de regressió obtinguts de predir el rendiment dels estudiants de doctorat a les universitats de Girona (Espanya) i Eslovènia. Les variables són característiques dels grups de recerca dels estudiants de doctorat enteses com una xarxa social egocèntrica, característiques personals i actitudinals dels estudiants de doctorat i algunes carecterístiques dels directors. Vam trobar que les variables de xarxa egocèntriques no predien el rendiment a la Universitat de Girona. En el capítol 5, comparem dades eslovenes, espanyoles i alemnayes, seguint la metodologia del capítol 4. Concluïm que el cas alemany és molt diferent. El poder predictiu de les variables de xarxa no millora. En el capítol 6 el grup de recerca dels estudiants de doctorat és entès com una xarxa duocèntrica (Coromina et al., 2008), amb l'objectiu d'obtendre informació de la relació mútua entre els estudiants i els seus directors i els contactes d'ambdós amb els altres de la xarxa. La inclusió de la xarxa duocèntrica no millora el poder predictiu del model de regressió utilitzant les variales egocèntriques de xarxa. El capítol 7 pretèn entendre perquè les variables de xarxa no predeixen el rendiment a la Universitat de Girona. Utilitzem el mètode mixte, esperant que l'estudi qualitatiu pugui cobrir les raons de perquè la qualitat de la xarxa falla en la qualitat del treball dels estudiants. Per recollir dades per l'estudi qualitatiu utilitzem entrevistes en profunditat.

Accumulated metal speciation in earthworm populations with multi-generational exposure to metalliferous soils: cell fractionation and high energy synchrotron analyses

Predicting metal bioaccumulation and toxicity in soil organisms is complicated by site-specific biotic and abiotic parameters. In this study we exploited tissue fractionation and digestion techniques, combined with X-ray absorption spectroscopy (XAS), to investigate the whole-body and subcellular distributions, ligand affinities, and coordination chemistry of accumulated Pb and Zn in field populations of the epigeic earthworm Lumbricus rubellus inhabiting three contrasting metalliferous and two unpolluted soils. Our main findings were (i) earthworms were resident in soils with concentrations of Pb and Zn ranging from 1200 to 27 000 mg kg(-1) and 200 to 34 000 mg kg(-1), respectively; (ii) Pb and Zn primarily accumulated in the posterior alimentary canal in nonsoluble subcellular fractions of earthworms; (iii) site-specific differences in the tissue and subcellular partitioning profiles of populations were observed, with earthworms from a calcareous site partitioning proportionally more Pb to their anterior body segments and Zn to the chloragosome-rich subcellular fraction than their acidic-soil inhabiting counterparts; (iv) XAS indicated that the interpopulation differences in metal partitioning between organs were not accompanied by qualitative differences in ligand-binding speciation, because crystalline phosphate-containing pyromorphite was a predominant chemical species in the whole-worm tissues of all mine soil residents. Differences in metal (Pb, Zn) partitioning at both organ and cellular levels displayed by field populations with protracted histories of metal exposures may reflect their innate ecophysiological responses to essential edaphic variables, such as Ca2+ status. These observations are highly significant in the challenging exercise of interpreting holistic biomarker data delivered by "omic" technologies.

The infrared vibration-rotation spectrum of trans and cis nitrous acid

Infrared spectra of the trans and the cis isomers of nitrous acid, both HONO and DONO, have been observed in the gas phase using a Fourier transform interferometer with a resolution of about 0.05 cm−1 from 4000 to 500 cm−1. Rotational analyses are reported on eleven of the fundamentals and some overtones.