Pieces of Iowa’s Past, April 13, 2011

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. April 13, 2011 THIS WEEK: Average Prices of Cattle, Cows and Sheep, and the Necessary Farming Implements for the Beginner BACKGROUND: From A Glimpse or Iowa in 1846; or, the Emigrant’s Guide, and State Directory; with a Description of the New Purchase: Embracing Much Practical Advice and Useful Information to Intending Emigrants. By J.B. Newhall, W.D. Skillman, Publisher; Burlington, Iowa, 1846, Second Edition

Response of Iowa Pavements to Heavy Agricultural Loads, HR-1075, 1999

Iowa's county road system includes several thousands of miles of paved roads which consist of Portland cement concrete (PCC) surfaces, asphalt cement concrete (ACC) surfaces, and combinations of thin surface treatments such as seal coats and slurries. These pavements are relatively thin pavements when compared to the state road system and therefore are more susceptible to damage from heavy loads for which they were not designed. As the size of the average farm in Iowa has increased, so have the size and weights of implements of husbandry. These implements typically have fewer axles than a truck hauling the same weight would be required to have; in other words, some farm implements have significantly higher axle weights than would be legal for semi-trailers. Since stresses induced in pavements are related to a vehicle's axle weight, concerns have been raised among county and state engineers regarding the possible damage to roadway surfaces that could result from some of these large implements of husbandry. Implements of husbandry on Iowa's highway system have traditionally not been required to comply with posted weight embargo on bridges or with regulations regarding axle-weight limitations on roadways. In 1999, with House File 651, the Iowa General Assembly initiated a phased program of weight restrictions for implements of husbandry. To help county and state engineers and the Iowa legislature understand the effects of implements of husbandry on Iowa's county roads, the following study was conducted. The study investigated the effects of variously configured grain carts, tank wagons, and fence-line feeders on Iowa's roadways, as well as the possible mitigating effects of flotation tires and tracks on the transfer of axle weights to the roadway. The study was accomplished by conducting limited experimental and analytical research under static loading conditions

ABCtoolbox: a versatile toolkit for approximate Bayesian computations.

BACKGROUND: The estimation of demographic parameters from genetic data often requires the computation of likelihoods. However, the likelihood function is computationally intractable for many realistic evolutionary models, and the use of Bayesian inference has therefore been limited to very simple models. The situation changed recently with the advent of Approximate Bayesian Computation (ABC) algorithms allowing one to obtain parameter posterior distributions based on simulations not requiring likelihood computations. RESULTS: Here we present ABCtoolbox, a series of open source programs to perform Approximate Bayesian Computations (ABC). It implements various ABC algorithms including rejection sampling, MCMC without likelihood, a Particle-based sampler and ABC-GLM. ABCtoolbox is bundled with, but not limited to, a program that allows parameter inference in a population genetics context and the simultaneous use of different types of markers with different ploidy levels. In addition, ABCtoolbox can also interact with most simulation and summary statistics computation programs. The usability of the ABCtoolbox is demonstrated by inferring the evolutionary history of two evolutionary lineages of Microtus arvalis. Using nuclear microsatellites and mitochondrial sequence data in the same estimation procedure enabled us to infer sex-specific population sizes and migration rates and to find that males show smaller population sizes but much higher levels of migration than females. CONCLUSION: ABCtoolbox allows a user to perform all the necessary steps of a full ABC analysis, from parameter sampling from prior distributions, data simulations, computation of summary statistics, estimation of posterior distributions, model choice, validation of the estimation procedure, and visualization of the results.

Maintenance of polymorphism : a theoretical approach using multilocus systems

Résumé La thématique de cette thèse peut être résumée par le célèbre paradoxe de biologie évolutive sur le maintien du polymorphisme face à la sélection et par l'équation du changement de fréquence gamétique au cours du temps dû, à la sélection. La fréquence d'un gamète xi à la génération (t + 1) est: !!!Equation tronquée!!! Cette équation est utilisée pour générer des données utlisée tout au long de ce travail pour 2, 3 et 4 locus dialléliques. Le potentiel de l'avantage de l'hétérozygote pour le maintien du polymorphisme est le sujet de la première partie. La définition commune de l'avantage de l'hétérozygote n'etant applicable qu'a un locus ayant 2 allèles, cet avantage est redéfini pour un système multilocus sur les bases de précédentes études. En utilisant 5 définitions différentes de l'avantage de l'hétérozygote, je montre que cet avantage ne peut être un mécanisme général dans le maintien du polymorphisme sous sélection. L'étude de l'influence de locus non-détectés sur les processus évolutifs, seconde partie de cette thèse, est motivée par les travaux moléculaires ayant pour but de découvrir le nombre de locus codant pour un trait. La plupart de ces études sous-estiment le nombre de locus. Je montre que des locus non-détectés augmentent la probabilité d'observer du polymorphisme sous sélection. De plus, les conclusions sur les facteurs de maintien du polymorphisme peuvent être trompeuses si tous les locus ne sont pas détectés. Dans la troisième partie, je m'intéresse à la valeur attendue de variance additive après un goulot d'étranglement pour des traits sélectionés. Une études précédente montre que le niveau de variance additive après goulot d'étranglement augmente avec le nombre de loci. Je montre que le niveau de variance additive après un goulot d'étranglement augmente (comparé à des traits neutres), mais indépendamment du nombre de loci. Par contre, le taux de recombinaison a une forte influence, entre autre en regénérant les gamètes disparus suite au goulot d'étranglement. La dernière partie de ce travail de thèse décrit un programme pour le logiciel de statistique R. Ce programme permet d'itérer l'équation ci-dessus en variant les paramètres de sélection, recombinaison et de taille de populations pour 2, 3 et 4 locus dialléliques. Cette thèse montre qu'utiliser un système multilocus permet d'obtenir des résultats non-conformes à ceux issus de systèmes rnonolocus (la référence en génétique des populations). Ce programme ouvre donc d'intéressantes perspectives en génétique des populations. Abstract The subject of this PhD thesis can be summarized by one famous paradox of evolu-tionary biology: the maintenance of polymorphism in the face of selection, and one classical equation of theoretical population genetics: the changes in gametic frequencies due to selection and recombination. The frequency of gamete xi at generation (t + 1) is given by: !!! Truncated equation!!! This equation is used to generate data on selection at two, three, and four diallelic loci for the different parts of this work. The first part focuses on the potential of heterozygote advantage to maintain genetic polymorphism. Results of previous studies are used to (re)define heterozygote advantage for multilocus systems, since the classical definition is for one diallelic locus. I use 5 different definitions of heterozygote advantage. And for these five definitions, I show that heterozygote advantage is not a general mechanism for the maintenance of polymorphism. The study of the influence of undetected loci on evolutionary processes (second part of this work) is motivated by molecular works which aim at discovering the loci coding for a trait. For most of these works, some coding loci remains undetected. I show that undetected loci increases the probability of maintaining polymorphism under selection. In addition, conclusions about the factor that maintain polymorphism can be misleading if not all loci are considered. This is, therefore, only when all loci are detected that exact conclusions on the level of maintained polymorphism or on the factor(s) that maintain(s) polymorphism could be drawn. In the third part, the focus is on the expected release of additive genetic variance after bottleneck for selected traits. A previous study shows that the expected release of additive variance increases with an increase in the number of loci. I show that the expected release of additive variance after bottleneck increases for selected traits (compared with neutral), but this increase is not a function of the number of loci, but function of the recombination rate. Finally, the last part of this PhD thesis is a description of a package for the statistical software R that implements the Equation given above. It allows to generate data for different scenario regarding selection, recombination, and population size. This package opens perspectives for the theoretical population genetics that mainly focuses on one locus, while this work shows that increasing the number of loci leads not necessarily to straightforward results.

BadiRate: Estimating Family Turnover Rates by Likelihood-Based Methods

Motivation: The comparative analysis of gene gain and loss rates is critical for understanding the role of natural selection and adaptation in shaping gene family sizes. Studying complete genome data from closely related species allows accurate estimation of gene family turnover rates. Current methods and software tools, however, are not well designed for dealing with certain kinds of functional elements, such as microRNAs or transcription factor binding sites. Results: Here, we describe BadiRate, a new software tool to estimate family turnover rates, as well as the number of elements in internal phylogenetic nodes, by likelihood-based methods and parsimony. It implements two stochastic population models, which provide the appropriate statistical framework for testing hypothesis, such as lineage-specific gene family expansions or contractions. We have assessed the accuracy of BadiRate by computer simulations, and have also illustrated its functionality by analyzing a representative empirical dataset.

Genome-wide DNA polymorphism analyses using VariScan

BACKGROUND: DNA sequence polymorphisms analysis can provide valuable information on the evolutionary forces shaping nucleotide variation, and provides an insight into the functional significance of genomic regions. The recent ongoing genome projects will radically improve our capabilities to detect specific genomic regions shaped by natural selection. Current available methods and software, however, are unsatisfactory for such genome-wide analysis. RESULTS: We have developed methods for the analysis of DNA sequence polymorphisms at the genome-wide scale. These methods, which have been tested on a coalescent-simulated and actual data files from mouse and human, have been implemented in the VariScan software package version 2.0. Additionally, we have also incorporated a graphical-user interface. The main features of this software are: i) exhaustive population-genetic analyses including those based on the coalescent theory; ii) analysis adapted to the shallow data generated by the high-throughput genome projects; iii) use of genome annotations to conduct a comprehensive analyses separately for different functional regions; iv) identification of relevant genomic regions by the sliding-window and wavelet-multiresolution approaches; v) visualization of the results integrated with current genome annotations in commonly available genome browsers. CONCLUSION: VariScan is a powerful and flexible suite of software for the analysis of DNA polymorphisms. The current version implements new algorithms, methods, and capabilities, providing an important tool for an exhaustive exploratory analysis of genome-wide DNA polymorphism data.

DnaSP v5: A software for comprehensive analysis of DNA polymorphism data

DnaSP is a software package for a comprehensive analysis of DNA polymorphism data. Version 5 implements a number of new features and analytical methods allowing extensive DNA polymorphism analyses on large datasets. Among other features, the newly implemented methods allow for: (i) analyses on multiple data files; (ii) haplotype phasing; (iii) analyses on insertion/deletion polymorphism data; (iv) visualizing sliding window results integrated with available genome annotations in the UCSC browser.

Life designing: A paradigm for career construction in the 21st century

At the beginning of the 21st century, a new social arrangement of work poses a series of questions and challenges to scholars who aim to help people develop their working lives. Given the globalization of career counseling, we decided to address these issues and then to formulate potentially innovative responses in an international forum. We used this approach to avoid the difficulties of creating models and methods in one country and then trying to export them to other countries where they would be adapted for use. This article presents the initial outcome of this collaboration, a counseling model and methods. The life-designing model for career intervention endorses five presuppositions about people and their work lives: contextual possibilities, dynamic processes, non-linear progression, multiple perspectives, and personal patterns. Thinking from these five presuppositions, we have crafted a contextualized model based on the epistemology of social constructionism, particularly recognizing that an individual's knowledge and identity are the product of social interaction and that meaning is co-constructed through discourse. The life-design framework for counseling implements the theories of self-constructing [Guichard, J. (2005). Life-long self-construction. International Journal for Educational and Vocational Guidance, 5, 111-124] and career construction [Savickas, M. L. (2005). The theory and practice of career construction. In S. D. Brown & R. W. Lent (Eds.), Career development and counselling: putting theory and research to work (pp. 42-70). Hoboken, NJ: Wiley] that describe vocational behavior and its development. Thus, the framework is structured to be life-long, holistic, contextual, and preventive.

BadiRate: estimating family turnover rates by likelihood-based methods

Motivation: The comparative analysis of gene gain and loss rates is critical for understanding the role of natural selection and adaptation in shaping gene family sizes. Studying complete genome data from closely related species allows accurate estimation of gene family turnover rates. Current methods and software tools, however, are not well designed for dealing with certain kinds of functional elements, such as microRNAs or transcription factor binding sites. Results: Here, we describe BadiRate, a new software tool to estimate family turnover rates, as well as the number of elements in internal phylogenetic nodes, by likelihood-based methods and parsimony. It implements two stochastic population models, which provide the appropriate statistical framework for testing hypothesis, such as lineage-specific gene family expansions or contractions. We have assessed the accuracy of BadiRate by computer simulations, and have also illustrated its functionality by analyzing a representative empirical dataset.

Embedded Monitoring Server

This study investigates, designs, and implements an inexpensive application that allows local and remote monitoring of a home. The application consists of an array of sensors for monitoring different conditions in a home environment and also for accessing the devices that might be connected to the system. Only a few sensors are initially involved in this study and information about the temperature level, forced entry detection, smoke and water leakage detection can be obtained at any time from any location with an Internet connection. The application software (coded in C language) runs on an embedded system which is basically a wireless Linksys router running on a GNU/Linux based firmware for embedded systems. Interaction between the sensors and the application software is achieved through an implemented sensor interfacing circuit. The communication with the sensor interfacing unit is done through the serial port, and accessibility of the connected sensors is achieved through a telnet client. The sensors can be accessed from local and remote locations with the sensors giving reliable information. The resulting application shows that it is possible to use the router for other applications other than what it is intended for.

Tuotekehitys- ja innovaatioprosessin kehittäminen yrityksessä

Tutkimus käsittelee tuotekehitys- ja innovaatioprosessin kehittämistä ja sen vakiinnuttamista kohdeyrityksissä A ja B. Työssä luodaan ensin kirjallisuustutkimuksena yleinen teoreettinen viitekehys ja lähtötilannemalli tuotekehitys- ja innovaatioprosessin referenssimallille. Tämän vaiheen aikanakäsitellään erilaisia elementtejä ja vaiheita, joita tarvitaan kehitysprosessinkuvaamiseen ja sen kehittämiseen. Prosessimallissa ovat keskeisessä osassa päätöspisteet, joiden arviointikriteereitä ja -tekniikoita työssä käsitellään osana portfolion hallinnan eri mahdollisuuksia. Kehitettyä teoreettista mallia lähdetään implementoimaan työn toisessa osassa kohdeyrityksiin A ja B. Implementoinninyhteydessä käydään läpi sekä prosessikuvaus että siihen liittyvät päätöskriteerit. Tutkimuksen lopputuloksena on yrityksille tuotettu esitys innovaatioprosessista ja sen eri osa-alueista tarkemmalla tasolla sekä tutkimuksen puitteissa rakennettu portfoliotyökalu, jolla kehitysprojekteja voidaan hallinnoida niiden eri vaiheissa.

Case-yrityksen vertikaaliratkaisujen toimittajakumppanuuksien johtaminen

IT-toimialan järjestelmätoimittajien liittoutuminen alalla toimivien vertikaalitoimittajien kanssa on tuonut mukanaan tarpeita kumppanuustoiminnan kehittämiselle. Kehittämiseen liittyy läheisesti kumppanuustoiminnan mittaaminen ja kumppanuuksien arviointi, jotta voidaan varmistaa kehittämistoimien tuloksellisuus ja kumppanuustoiminnan tehokkuus. Tutkimuksen tarkoituksena olitutkia case-yrityksen kumppanuusmallin ja kumppanuuteen liittyvän toiminnan tehokkuutta ja kehittymiskykyä. Lähtökohtana oli kumppanuuteen vaikuttavista elementeistä, kuten luottamus, sosiaalinen pääoma ja kumppanuusmekanismit, aikaisemmintuotetun tutkimusaineistojen selvittäminen ja hyväksikäyttö. Kerättyä aineistoapeilattiin case-yrityksen kumppanitoiminnan malliin ja menetelmiin toimittajakumppanuuksissa. Vertailulla pyrittiin selvittämään miten case-yritys toteuttaa kumppanuustoimintaansa ja miten toimintaa voisi parantaa. Lopputuloksena arvioitiin case-yrityksen kumppanuustoimintaa esitettyjen teorioiden näkökulmasta ja muodostettiin case-yritykselle kumppanuustoiminnan mittaamista tukeva mittaristo. Tutkimus on kirjallisuustutkimus ja siinä käytettiin lähteinä keskeisimpiä kumppanuudesta kirjoitettua kirjallisuutta ja kumppanuuden hallinnasta tehtyjä tutkimuksia.

Data-parallel computation in parallel and distributed environments

The past few decades have seen a considerable increase in the number of parallel and distributed systems. With the development of more complex applications, the need for more powerful systems has emerged and various parallel and distributed environments have been designed and implemented. Each of the environments, including hardware and software, has unique strengths and weaknesses. There is no single parallel environment that can be identified as the best environment for all applications with respect to hardware and software properties. The main goal of this thesis is to provide a novel way of performing data-parallel computation in parallel and distributed environments by utilizing the best characteristics of difference aspects of parallel computing. For the purpose of this thesis, three aspects of parallel computing were identified and studied. First, three parallel environments (shared memory, distributed memory, and a network of workstations) are evaluated to quantify theirsuitability for different parallel applications. Due to the parallel and distributed nature of the environments, networks connecting the processors in these environments were investigated with respect to their performance characteristics. Second, scheduling algorithms are studied in order to make them more efficient and effective. A concept of application-specific information scheduling is introduced. The application- specific information is data about the workload extractedfrom an application, which is provided to a scheduling algorithm. Three scheduling algorithms are enhanced to utilize the application-specific information to further refine their scheduling properties. A more accurate description of the workload is especially important in cases where the workunits are heterogeneous and the parallel environment is heterogeneous and/or non-dedicated. The results obtained show that the additional information regarding the workload has a positive impact on the performance of applications. Third, a programming paradigm for networks of symmetric multiprocessor (SMP) workstations is introduced. The MPIT programming paradigm incorporates the Message Passing Interface (MPI) with threads to provide a methodology to write parallel applications that efficiently utilize the available resources and minimize the overhead. The MPIT allows for communication and computation to overlap by deploying a dedicated thread for communication. Furthermore, the programming paradigm implements an application-specific scheduling algorithm. The scheduling algorithm is executed by the communication thread. Thus, the scheduling does not affect the execution of the parallel application. Performance results achieved from the MPIT show that considerable improvements over conventional MPI applications are achieved.

What to consider for applying backfilling on non-dedicated environments

The resource utilization level in open laboratories of several universities has been shown to be very low. Our aim is to take advantage of those idle resources for parallel computation without disturbing the local load. In order to provide a system that lets us execute parallel applications in such a non-dedicated cluster, we use an integral scheduling system that considers both Space and Time sharing concerns. For dealing with the Time Sharing (TS) aspect, we use a technique based on the communication-driven coscheduling principle. This kind of TS system has some implications on the Space Sharing (SS) system, that force us to modify the way job scheduling is traditionally done. In this paper, we analyze the relation between the TS and the SS systems in a non-dedicated cluster. As a consequence of this analysis, we propose a new technique, termed 3DBackfilling. This proposal implements the well known SS technique of backfilling, but applied to an environment with a MultiProgramming Level (MPL) of the parallel applications that is greater than one. Besides, 3DBackfilling considers the requirements of the local workload running on each node. Our proposal was evaluated in a PVM/MPI Linux cluster, and it was compared with several more traditional SS policies applied to non-dedicated environments.

El paleolític superior final de la cova del Parco (Alòs de Balaguer, la Noguera)

Amb aquest treball donem a conèixer els resultats obtinguts fins avui referents al Magdalenià superior final i Magdalenià superior de la cova del Parco. Tant per la naturalesa i els usos de les llars, com per les evidències de captació de recursos abiòtics i biòtics i els tractaments dels mateixos hem definit les ocupacions d"aquest període com campaments o estatges de caràcter temporal, però d"una certa durada, segurament estacional.