Biomechanical Evaluation of Platform Switching in Different Implant Protocols: Computed Tomography-Based Three-Dimensional Finite Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Implant Connection Type on the Biomechanical Environment of Immediately Placed Implants - CT-Based Nonlinear, Three-Dimensional Finite Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effectiveness of Screw Surface Coating on the Stability of Zirconia Abutments After Cyclic Loading

Purpose: Different surface treatments have been developed in attempts to prevent the loosening of abutment screws. The aim of the current study was to compare the effectiveness of titanium alloy screws with tungsten-doped diamond-like carbon (W-DLC) coating and uncoated screws in providing stability to zirconia (ZrO2) ceramic abutments after cyclic loading. Materials and Methods: Twenty prefabricated ZrO2 ceramic abutments on their respective external-hex implants were divided into two groups of equal size according to the type of screw used: uncoated titanium alloy screw (Ti) or titanium alloy screw with W-DLC coating (W-DLC/Ti). The removal torque value (preload) of the abutment screw was measured before and after loading. Cyclic loading between 11 and 211 N was applied at an angle of 30 degrees to the long axis of the implants at a frequency of 15 Hz. A target of 0.5 x 10(6) cycles was defined. Group means were calculated and compared using analysis of variance and the F test (alpha=.05). Results: Before cyclic loading, the preload for Ti screws was significantly higher than that for W-DLC/Ti screws (P=.021). After cyclic loading, there was no significant difference between them (P=.499). Conclusions: Under the studied conditions, it can be concluded that, after cyclic loading, both abutment screws presented a significant reduction in the mean retained preload and similar effectiveness in maintaining preload. INT J ORAL MAXILLOFAC IMPLANTS 2012;27:1061-1067

Effects of extracts from Brazilian sun-mushroom (Agaricus blazei) on the NK activity and lymphoproliferative responsiveness of Ehrlich tumor-bearing mice

Agaricus blazei Murrill, is an edible and medicinal mushroom which is popularly consumed due to its antitumoral properties. The immunomodulatory effects of methanol (METH), dichloromethane (DM) and n-hexane (HEX) extracts of this mushroom were evaluated in Ehrlich tumor-bearing mice. Subcutaneous inoculation of Ehrlich tumor cells inhibited the natural killer (NK) activity of spleen cells (specific lysis = 6.18 +/- 2.56%) compared with normal mice (17.59 +/- 7.77%). Treatment of tumor-bearing mice with the extracts for 10 days restored the natural killer activity against Yac-1 target cells and the best results were observed by treatment with the HEX extract (21.48 +/- 15.26%). Treatment of the animals with the HEX extract for 10 days was also able to stimulate the mitogen-induced lymphoproliferative activity of spleen cells. Thirty days after the treatment, all groups presented low proliferative activity. Specific antibody production was observed to be higher in the groups treated with the DM or METH extract 30 days after the treatment. Analysis of the 3 extracts by gas chromatography mass spectrum (GCMS) and magnetic nuclear resonance (MNR) showed that the HEX extract contains mainly sugar and fatty acids and that the METH extract also contains sugar and possibly amino acids. (C) 2004 Elsevier Ltd. All rights reserved.

Gastric anti-ulcer activity of leaf fractions obtained of polar extract from Wilbrandia ebracteata in mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the analgesic and antiedematogenic activities of Quassia amara bark extract

We evaluated the possible antiedematogenic, antinociceptive and/or sedative effects of four different extracts obtained from the bark of Quassia amara namely, 70% ethanol (70EtOH), 100% ethanol (100EtOH), dichloromethane (DCM) and hexane extracts (HEX). The oral administration (100, 250 and 500 mg/kg) of these extracts did not show significant effects in any experiment. However, when administered intraperitoneally, the HEX extract decreased the paw edema induced by carrageenan, showed antinociceptive effects on the hot-plate test and on acetic acid-induced writhing, and showed sedative effects on pentobarbital-induced sleep. Naloxone did not reverse the antinociceptive effect of this extract. In conclusion, although the mechanisms are uncertain, the results demonstrated that these effects are apparently related to sedative and muscle relaxant or psychomimetic activities of the HEX extract of the plant. (C) 2002 Elsevier B.V. Ireland Ltd. All rights reserved.

Antiulcerogenic activity of four extracts obtained from the bark wood of Quassia amara L. (Simaroubaceae)

Quassia amara L., a neotropical forest shrub of the Simaroubaceae family, is widely used in Caribbean folk medicine and in some northern states of Brazil for the treatment of gastric ulcers. This plant is a source of numerous compounds including both beta-carbonile and cantin-6 alkaloids as well as, primarily, the bitter compounds known as quassinoids. We analyzed the possible antiulcerogenic activities of four extracts of different polarities: 70% ethanol (70% EtOH), 100% EtOH, 100% dichloromethane (DCM), and 100% hexane (HEX) obtained from Quassia amara bark. All extracts, administered at doses of 5000 mg/kg orally and 1000 mg/kg intraperitoneally, caused neither toxicity or death. In the indomethacin[bethanechol-induced gastric ulcer, 70% EtOH, 100% EtOH, DCM and HEX extracts, 100 mg/kg, p.o., inhibited the gastric ulcer (22.5, 23.4, 50.5, 46.8%, respectively). 70% EtOH, 100% EtOH, DCM, and HEX extracts reduced the gastric injury induced by the hypothermic restraint-stress test in mice (70.7, 80, 60, 82.7%, respectively). In the pylorus ligature of the mouse stomach, following pre-treatment with a single intraduodenal administration of 100 mg/kg of each extract, only 70% EtOH did not change the biochemical parameters of gastric juice. 100% EtOH, DCM and HEX extracts presented decreased gastric juice content, increased pH values and decreased acid output. We also determined the antiulcerogenic activity on HCl-EtOH-induced gastric ulcers in mice at four doses (25, 50, 75, 100 mg/kg, p.o.), then evaluated the possible dose-dependent relation and calculated the ED50 values. Except for 70% EtOH at a dose of 25 mg/kg, the other extracts showed significantly activity (p<0.05). The free mucous amount in the gastric stomach content was also evaluated. All extracts showed significant increases (p<0.05) of free mucous. This effect was abolished when the animals were pre-treated with indomethacin. Prostaglandin synthesis was evaluated by the administration of HEX extracts by the oral route (100 mg/kg). Prostaglandin synthesis was significantly, increased by 52.3% (p<0.05), and this effect was abolished with prior administration of indomethacin. We concluded that Quassia amara is a probable source for a new drug to treat gastric ulcers, and the mechanism of its activity relates to cytoprotective factors, such as mucous and prostaglandins, but there is still the possibility that antisecretory activity is involved in its antiulcerogenic effect.

Strain Gauge Analysis of the Effect of Porcelain Firing Simulation on the Prosthetic Misfit of Implant-Supported Frameworks

Objectives: This study investigated the effect of porcelain firing on the misfit of implant-supported frameworks and analyzed the influence of preheat treatment on the dimensional alterations.Materials and Methods: Four external-hex cylindrical implants were placed in polyurethane block. Ten frameworks of screw-retained implant-supported prostheses were cast in Pd-Ag using 2 procedures: (1) control group (CG, n = 5): cast in segments and laser welded; and test group (TG, n = 5): cast in segments, preheated, and laser welded. All samples were subjected to firing to simulate porcelain veneering firing. Strain gauges were bonded around the implants, and microstrain values (mu epsilon = 10(-6)epsilon) were recorded after welding (M1), oxidation cycle (M2), and glaze firing (M3). Data were statistically analyzed (2-way analysis of variance, Bonferroni, alpha = 0.05).Results: The microstrain value in the CG at M3 (475.2 mu epsilon) was significantly different from the values observed at M1 (355.6 mu epsilon) and M2 (413.9 mu epsilon). The values at M2 and M3 in the CG were not statistically different. Microstrain values recorded at different moments (M1: 361.6 mu epsilon/M2: 335.3 mu epsilon/M3: 307.2 mu epsilon) did not show significant difference.Conclusions: The framework misfit deteriorates during firing cycles of porcelain veneering. Metal distortion after porcelain veneering could be controlled by preheat treatment. (Implant Dent 2012;21:225-229)

The application of interpolating MLS approximations to the analysis of MHD flows

The element-free Galerkin method (EFGM) is a very attractive technique for solutions of partial differential equations, since it makes use of nodal point configurations which do not require a mesh. Therefore, it differs from FEM-like approaches by avoiding the need of meshing, a very demanding task for complicated geometry problems. However, the imposition of boundary conditions is not straightforward, since the EFGM is based on moving-least-squares (MLS) approximations which are not necessarily interpolants. This feature requires, for instance, the introduction of modified functionals with additional unknown parameters such as Lagrange multipliers, a serious drawback which leads to poor conditionings of the matrix equations. In this paper, an interpolatory formulation for MLS approximants is presented: it allows the direct introduction of boundary conditions, reducing the processing time and improving the condition numbers. The formulation is applied to the study of two-dimensional magnetohydrodynamic flow problems, and the computed results confirm the accuracy and correctness of the proposed formulation. (C) 2002 Elsevier B.V. All rights reserved.

Photoelastic comparison of single tooth implant-abutment-bone of platform switching vs conventional implant designs

Objectives: The maintenance and stability of peri-implantar soft tissue seem to be related to the crestal bone around the implant platform and different implant designs connections might affect this phenomenon. The aim of this study was to evaluate by photoelastic analysis the stress distribution in the cervical and apical site of implant-abutment interface of conventional implant joints (external hex, internal hex and cone morse) and compare to the novel platform switching design. Materials and methods: It was fabricated photoelastic models using five different implant-abutment connection, one set of external hex (Alvim Ti, Neodent, Curitiba, Brazil), one set of internal hex (Full Osseotite, Biomet 3i, Florida, USA), one cone morse set (Alvim CM, Neodent, Curitiba, Brazil), and two sets of internal hex plus platform switching concept (Alvim II Plus, Neodent, Curitiba, Brazil) (Certain Prevail, Biomet 3i, Florida, USA). These models were submitted to two compressive loads, axial from 20 kgf (load I) and another (load II), inclined 45° from 10 kgf. During the qualitative analysis, digital pictures were taken from a polariscope, for each load situation. For the quantitative analyses in both situations of load, the medium, minimum and maximum in MPa values of shear strain were determined in the cervical and apical site. The Kruskal-Wallis test was used to compare the results between the different systems and between cervical and apical site were compared using Mann-Whitney U test. Results: The results from qualitative analysis showed less concentration of strain in the cervical area to the internal hex plus platform switching (Certain Prevail), in both situation of load. The same results were get in the quantitative analysis, showing less stress concentrations around the implant Certain Prevail with internal hex plus the novel design (17.9 MPa to load I and 29.5 MPa to load II), however, without statistical significant difference between the systems. Conclusion: The minor stress concentration strongly suggest the use of platform switching design as a manner to prevent bone loss around the implant-abutment platform. Clinical Significance: From the result of this study its possible to make clinical decision for implant system which provides implant components with platform switching characteristics.

Pressão intra-ocular, condições endoteliais e prostaglandina E2 no humor aquoso de cães com catarata senil madura ou hipermatura

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Radiciações e frações solares UV, PAR, IV em estufa de polietileno: evolução anual média mensal diária e equações de estimativa

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efetividade de parafusos com tratamento de superfície na estabilidade de pilares em zircônia após carga cíclica

Pós-graduação em Reabilitação Oral - FOAR

Estudo fitoquímico, avaliação da toxicidade oral aguda e da atividade antimalárica in vitro e in vivo das cascas de Parahancornia fasciculata (Poir.) Benoist (Apocynaceae)

Parahancornia fasciculata (Poir.) Benoist (Apocynaceae), também conhecida como Parahancornia amapa (Hub.) Ducke, é uma espécie vegetal empregada popularmente no tratamento da malária, infecções no útero, gastrite, anemia, problemas respiratórios, entre outros. Os objetivos do presente trabalho foram realizar o estudo fitoquímico, avaliar a toxicidade oral aguda e a atividade antimalárica in vitro e in vivo de extratos, frações e substância isolada obtidas a partir de cascas do caule de P. fasciculata. Foram realizados dois tipos de extrações com o pó das cascas de P. fasciculata, por maceração / percolação, com etanol 96°GL e diclorometano, esta última tendo sido realizada a com o pó das cascas alcalinizado com hidróxido de amônio, obtendo-se os extratos secos EEPF e EDAPF, respectivamente. Uma terceira extração foi realizada a partir do EEPF por aquecimento sob refluxo, sucessivamente, com Hex:DCM (1:1), AcOEt:DCM (1:1) e AcOEt. EEPF foi, também, submetido a fracionamento por extrações ácido-base resultando nas frações de neutros (EEPFN) e de alcalóides (EEPFA). A prospecção fitoquímica realizada com o EEPF foi desenvolvida por CCD em cromatoplacas de sílica gel tendo sido detectada a presença de triterpenos, esteróides, heterosídeos flavônicos, saponinas, polifenóis, taninos, heterosídeos antracênicos e heterosídeos cardiotônicos. EDAPF foi submetido à cromatografia em coluna de sílica gel. Foram recolhidas 30 frações sendo que as frações Fr1-3, Fr4, Fr5-7 e Fr11 concentraram a maior parte da massa do extrato cromatografado. Da Fr5-7 foi isolada uma mistura de ésteres do lupeol que representam os componentes majoritários do EDAPF. Esta fração passou por um processo de hidrólise alcalina e o produto obtido (Fr5-7Hid) foi analisado por espectrometrias no IV, RMN de ¹H e ¹³C e foi identificado como o triterpeno lupeol. A fração insolúvel em AcOEt obtida a partir do EEPF, por aquecimento sob refluxo, apresentou resultado positivo para o teste de proantocianidinas e foi submetido a doseamento desta classe de metabólitos. Os resultados foram expressos em porcentagem dos teores para a amostra não diluída (10,46±0,3419%), amostra diluída a 1:10 (9,94± 0,1598%) e amostra diluída a 1:100 (10,55± 0,9299%). A avaliação da atividade antiplasmódica in vitro em culturas de cepas W2 de Plasmodium falciparum foi realizada pelo teste da Proteína II Rica em Histidina (HRP-II) tendo sido testados EEPF, EEPFN, EEPFA, Fr1-3, Fr4, Fr5-7(ésteres do lupeol), Fr11 e o Fr5-7Hid (lupeol). Os melhores resultados obtidos foram para EEPF, EEPFA E EEPFN (CI₅₀= ~ 50 μg/mL) sendo considerados moderadamente ativos. As demais amostras apresentaram CI₅₀ > 50 μg/mL e foram consideradas inativas. Realizou-se também a avaliação da atividade antimalárica in vivo em camundongos fêmeas suíços infectados com cepas ANKA de P. berghei com o EEPF e o EEPF-HEX:DCM (1:1) em concentrações de 500, 250 e 125mg/kg de peso. EEPF foi parcialmente ativo, somente no 8° dia, em todas as concentrações. Já EEPF-HEX:DCM (1:1) foi parcialmente ativo na dose de 500mg/kg de peso e nas demais doses foi inativo. O teste de toxicidade oral aguda foi realizado em camundongos fêmeas suíços, pelo método da dose fixa (5.000mg/kg), com EEPF e não apresentou nenhum sinal de toxicidade evidente, o que foi confirmado pela ausência de alterações nos exames anátomohistopatológicos realizados.

Influência do tipo de pilar de resistência mecânica pré-ciclagem, quantidade de toque retido e desajuste vertical pré e pós-ciclagem, com análise estrutural em MEV

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)