Principais mecanismos envolvidos na maturação oocitária em bovinos: da oogenese a maturação in vitro

Despite the efforts made to improve the production of bovine embryos in vitro, their efficiency is still low, since only 30-40% of developed blastocysts are obtained from oocytes after in vitro maturation (IVM), fertilization and cultured embryos. Assisted reproductive technologies have a limiting impact due a lack of oocytes capable to fertilization.The comprehension of mechanism involved in oocyte maturation are crucial to establish a culture system that allows a larger number production of good quality embryos. The study of the early stages of oocyte and follicle development in vivo is important for a better understanding of the molecular pathways that regulate oogenesis, folliculogenesis and oocyte maturation. Thus the physiological biochemical and molecular mechanisms involved in maturation may contribute to the increased efficiency of in vitro embryo production. Therefore, the aim of this literature review is to understand the basic mechanisms that underlie oocyte maturation in cattle, since oocyte and follicle cells in vivo formation to its use in the in vitro environment.

Developmental and Epigenetic Anomalies in Cloned Cattle

Many of the developmental anomalies observed in cloned animals are related to foetal and placental overgrowth, a phenomenon known as the 'large offspring syndrome' (LOS) in ruminants. It has been hypothesized that the epigenetic control of imprinted genes, that is, genes that are expressed in a parental-specific manner, is at the root of LOS. Our recent research has focused on understanding epigenetic alterations to imprinted genes that are associated with assisted reproductive technologies (ART), such as early embryo in vitro culture (IVC) and somatic cell nuclear transfer (SCNT) in cattle. We have sought and identified single nucleotide polymorphisms in Bos indicus DNA useful for the analysis of parental-specific alleles and their respective transcripts in tissues from hybrid embryos derived by crossing Bos indicus and Bos taurus cattle. By analysing differentially methylated regions (DMRs) of imprinted genes SNRPN, H19 and the IGF2R in cattle, we demonstrated that there is a generalized hypomethylation of the imprinted allele and the biallelic expression of embryos produced by SCNT when compared to the methylation patterns observed in vivo (artificially inseminated). Together, these results indicate that imprinting marks are erased during the reprogramming of the somatic cell nucleus during early development, indicating that such epigenetic anomalies may play a key role in mortality and morbidity of cloned animals.

Sperm head morphometry in ejaculates of adult marmosets (Callithrix jacchus): a model for studying sperm subpopulations and among-donor variations

In humans and other mammals, sperm morphology has been considered one of the most important predictive parameters of fertility. The objective was to determine the presence and distribution of sperm head morphometric subpopulations in a nonhuman primate model (Callithrix jacchus), using an objective computer analysis system and principal component analysis (PCA) methods to establish the relationship between the subpopulation distribution observed and among-donor variation. The PCA method revealed a stable number of principal components in all donors studied, that represented more than 85% of the cumulative variance in all cases. After cluster analysis, a variable number (from three to seven) sperm morphometric subpopulations were identified with defined sperm dimensions and shapes. There were differences in the distribution of the sperm morphometric subpopulations (P < 0.001) in all ejaculates among the four donors analyzed. In conclusion, in this study, computerized sperm analysis methods combined with PCA cluster analyses were useful to identify, classify, and characterize various head sperm morphometric subpopulations in nonhuman primates, yielding considerable biological information. In addition, because all individuals were kept in the same conditions, differences in the distribution of these subpopulations were not attributed to external or management factors. Finally, the substantial information derived from subpopulation analyses provided new and relevant biological knowledge which may have a practical use for future studies in human and nonhuman primate ejaculates, including identifying individuals more suitable for assisted reproductive technologies. (c) 2012 Elsevier Inc. All rights reserved.

Luminophores and Carbon nanostructures: towards new functional materials

In the scenario of depleting fossil fuels, finding new energy technologies and conserving conventional energy resources have become essential to sustain modern civilization. While renewable energies are on the rise, considerable interest has been turned also to reduce energy consumption of conventional devices and appliances, which are often not yet optimized for this purpose. Modern nanotechnology provides a platform to build such devices by using nanomaterials showing exceptional physico-chemical properties. In particular, carbon materials (fullerenes, carbon nanotubes, graphene etc.), which show high thermal and electrical conductivity, aspect ratio, shear strength and chemical/mechanical resistance, are quite promising for a wide range of applications. However, the problem of solubility often hampers their handling and industrial utilization. These limitations can be mitigated by functionalizing carbon nanostructures, either covalently or non covalently, with organic or inorganic compounds. The exo- and endohedral functionalization of carbon nanotubes (CNTs) with organic/inorganic moieties to produce luminescent materials with desired properties are the main focus of this doctoral work. These hybrids have been thoroughly designed and characterized with chemical, microscopic and photophysical analyses. All the materials based on carbon nanostructures described in this thesis are innovative examples of photoactive and luminescent hybrids, and their morphological and photophysical properties help understanding the nature of interactions between the active units. This may prompt the design and fabrication of new functional materials for applications in the fields of optoelectronics and photovoltaics.

Der Einfluss assistierter Reproduktionstechniken auf die epigenetische Reprogrammierung in der fruehen Embryogenese und Gametogenese im Mausmodell

Seit der Geburt von Louise J. Brown (1978) als erstem künstlich erzeugtem Kind hat sich die Nachfrage nach assistierten Reproduktionstechniken (ART) stark erhöht. Der Anteil der nach In-vitro-Fertilisation (IVF) oder Intrazytoplasmatischer Spermieninjektion (ICSI) geborenen Kinder macht mittlerweile abhängig vom betrachteten Industrieland zwischen 1-4% an der Gesamtgeburtenzahl aus. In zahlreichen Studien korreliert eine erhöhte Prävalenz für seltene Imprinting-Erkrankungen, wie z.B. Beckwith-Wiedemann oder Angelman-Syndrom, mit der Geburt nach assistierten Reproduktionstechniken. Es ist bekannt, dass die medizinischen Interventionen zur Behandlung von Sub- und Infertilität in sehr sensitive Phasen der epigenetischen Reprogrammierung des Embryos und der Keimzellen eingreifen. In der vorliegenden Arbeit wurde untersucht, ob die ovarielle Stimulation einen Einfluss auf die epigenetische Integrität von geprägten Genen in murinen Präimplantationsembryonen hat. Die in diesem Zusammenhang entwickelte digitale Bisulfitpyrosequenzierung gewährleistet die Analyse der DNA-Methylierung auf Einzelallelebene durch eine adäquate Verdünnung der Probe im Vorfeld der PCR. Die ovarielle Induktion führte zu einem erhöhten Rate an Epimutationen des paternalen H19-Allels, sowie des maternalen Snrpn-Allels. Zudem konnte festgestellt werden, dass die Expression von drei potentiellen Reprogrammierungsgenen (Apex1, Polb, Mbd3) in Embryonen aus hormonell stimulierten Muttertieren dereguliert ist. Whole-Mount Immunfluoreszenzfärbungen für APEX1 korrelierten dessen differentielle Genexpression mit dem Proteinlevel. Anzeichen früher apoptotischer Vorgänge äußerten sich in Embryonen aus hormonell induzierten Muttertieren in der hohen Rate an Embryonen, die keines der drei Transkripte exprimierten oder weniger APEX1-positive Blastomeren aufwiesen.In einer weiteren Fragestellung wurde untersucht, ob die Kryokonservierung muriner Spermatozoen den epigenetischen Status geprägter Gene in den Keimzellen beeinflusst. Die Analyse von F1-Zweizellembryonen, die durch IVF mit den jeweiligen Spermatozoen eines Männchens generiert wurden, diente der Aufklärung möglicher paternaler Transmissionen. Insgesamt konnten keine signifikanten Auswirkungen der Kryokonservierung auf den epigenetischen Status in Spermatozoen und F1-Embryonen ermittelt werden.

Tel Aviv - Mumbai - Tel Aviv: Same-Sex couples seeking parenthood in India

In Israel religious belonging remains a central category of citizenship. Laws concerning reproductive technologies such as the surrogacy law from 1996 are strongly informed by Orthodox rabbis’ kinship concepts (Kahn 2000, Shalev 1998, Weisberg 2005). A set of regulations secures that heterosexual Jewish couples bring into being children who are unequivocally Jewish themselves. The Israeli surrogacy law can therefore be understood as part of a policy seeking to reproduce the boundaries of the Jewish-Israeli collective. Same-sex couples do not fit this narrow definition of family and have no access to surrogacy in Israel. Yet gay couples maintain that parenthood is a universal civil right and bypass their exclusion through surrogacy arrangements abroad. The proposed paper follows these couples to Mumbai, which has become a popular destination for surrogacy in recent years. After their children’s birth the couples spend three to five weeks in India. In this time they not only take on their new tasks as fathers. They are also occupied with the bureaucracy of disconnecting the children from India and turning them into Israeli citizens. The paper elaborates on the bureaucratic processes and the hurdles same-sex couples encounter when seeking recognition of their parenthood and citizenship for their children. It unveils the intricacies and ramifications of Israel’s contradicting surrogacy policy of enforcing narrow definitions of family inside the country and simultaneously outsourcing problematic cases.

Expression of Imprinted Genes Is Aberrant in Deceased Newborn Cloned Calves and Relatively Normal in Surviving Adult Clones

Cattle are the species used most frequently for the development of assisted reproductive technologies, such as nuclear transfer. Cattle cloning can be performed by a large number of laboratories around the world, and the efficiency of nuclear transfer in cattle is the highest among all species in which successful cloning has been achieved. However, an understanding of the expression of imprinted genes in this important species is lacking. In the present study, real time reverse transcription polymerase chain reaction (RT-PCR) was utilized to quantify the expression of the bovine Igf2, Igf2r, and H19 genes in eight major organs (brain, bladder, heart, kidney, liver, lung, spleen, and thymus) of somatic cell cloned calves that died shortly after birth, in three tissues (skin, muscle, and liver) of healthy clones that survived to adulthood, and in corresponding tissues of control animals from natural reproduction. We found that, deceased bovine cloned calves exhibited abnormal expression of all three genes studied in various organs. Large variations in the expression levels of imprinted genes were also seen among these clones, which were produced from the same genetic donor. In surviving adult clones, however, the expression of these imprinted genes was largely normal, except for the expression of the Igf2 gene in muscle, which was highly variable. Our data showed disruptions of expression of imprinted genes in bovine clones, which is possibly due to incomplete reprogramming of donor cell nuclei during nuclear transfer, and these abnormalities may be associated with the high neonatal mortality in cloned animals; clones that survived to adulthood, however, are not only physically healthy but also relatively normal at the molecular level of those three imprinted genes.

La interactividad interpretativa : dispositivos y narrativas

El presente trabajo tiene como objetivo aportar reflexiones a los cambios y mutaciones producidos por las nuevas Tecnologías de la Comunicación y el Conocimiento (TIC), en los productos paradigmáticos de la “comunicación intencional", desde una mirada que abarca las transformaciones de los relatos y las competencias de un nuevo modelo de destinatario. Antes de la aparición de las tecnologías de reproducción y comunicación pública, (anteriormente llamada “comunicación de masas"), existieron dispositivos, fuera del circuito de la cultura escrita, que apelaban a emisores y destinatarios con competencias que excedían la interpretación del escrito.

Fenomenología de la intercorporeidad

Este artículo se refiere al concepto de intercorporeidad, como una posibilidad de intercambio de partes o piezas entre seres humanos, profundizada por nuevas tecnologías biomédicas. Explica cómo estos intercambios producen otra intersubjetividad, con sus distintas formas de concreción, (transplantes, implantes, transfusiones, donaciones) y analiza sus efectos en un plano biológico, experencial y cultural. Establece nexos entre los posibles procesos de revolución de los cuerpos y su estrecha relación con las transformaciones sociales. Luego el texto al remitirse al concepto de propiedad corporal, muestra diversas posiciones ideológicas que se pueden establecer con los cuerpos, según las apropiaciones y disponibilidades personales, colectivas o universales validadas en un momento particular de la cultura. Con base a estas posibles construcciones sociales, se configuran doctrinas biojurídicas peculiares, que nos exhortan a pensar en la bioética como una teoría de la vida.

Fenomenología de la intercorporeidad

Este artículo se refiere al concepto de intercorporeidad, como una posibilidad de intercambio de partes o piezas entre seres humanos, profundizada por nuevas tecnologías biomédicas. Explica cómo estos intercambios producen otra intersubjetividad, con sus distintas formas de concreción, (transplantes, implantes, transfusiones, donaciones) y analiza sus efectos en un plano biológico, experencial y cultural. Establece nexos entre los posibles procesos de revolución de los cuerpos y su estrecha relación con las transformaciones sociales. Luego el texto al remitirse al concepto de propiedad corporal, muestra diversas posiciones ideológicas que se pueden establecer con los cuerpos, según las apropiaciones y disponibilidades personales, colectivas o universales validadas en un momento particular de la cultura. Con base a estas posibles construcciones sociales, se configuran doctrinas biojurídicas peculiares, que nos exhortan a pensar en la bioética como una teoría de la vida.

Fenomenología de la intercorporeidad

Este artículo se refiere al concepto de intercorporeidad, como una posibilidad de intercambio de partes o piezas entre seres humanos, profundizada por nuevas tecnologías biomédicas. Explica cómo estos intercambios producen otra intersubjetividad, con sus distintas formas de concreción, (transplantes, implantes, transfusiones, donaciones) y analiza sus efectos en un plano biológico, experencial y cultural. Establece nexos entre los posibles procesos de revolución de los cuerpos y su estrecha relación con las transformaciones sociales. Luego el texto al remitirse al concepto de propiedad corporal, muestra diversas posiciones ideológicas que se pueden establecer con los cuerpos, según las apropiaciones y disponibilidades personales, colectivas o universales validadas en un momento particular de la cultura. Con base a estas posibles construcciones sociales, se configuran doctrinas biojurídicas peculiares, que nos exhortan a pensar en la bioética como una teoría de la vida.

Luciano Kulczewski, arquitecto: Eclecticismo y procesos modernizadores en el Chile de la primera mitad del siglo XX

Esta investigación tiene por fin poner en valor la obra del arquitecto chileno Luciano Kulczewski, profesional que cumplió un rol clave y distintivo en la primera mitad del siglo XX, considerado como un período crucial para el desarrollo de la arquitectura nacional, ya que es el momento en que se produce el advenimiento de la modernidad en el país. Si bien su figura goza de un gran reconocimiento, solamente una parte de su obra es (re)conocida por la historiografía nacional. Su labor en el libre ejercicio de la profesión, como asimismo los distintos cargos administrativos y políticos que desempeñó en su vida, hacían suponer un corpus más amplio, como finalmente se pudo constatar en este estudio. El amplio catastro documentado permitió fehacientemente identificar el rol y el significado que esta obra cumpliera en la transición que hizo posible dejar atrás los valores impuesto por el Academicismo, para incorporar los procesos de modernización en los distintos ámbitos de la arquitectura. Por tanto, el quehacer de Kulczewski se reveló como ejemplar y paradigmático. Una de las ilustraciones más elocuentes a este respecto fue la precursora realización de edificios en altura para uso residencial. Esta tipología lo obligó a trabajar con nuevos materiales y técnicas constructivas, junto a la necesidad de introducir las modernas tecnologías que estos portentos arquitectónicos requerían para su funcionamiento, como era el uso de ascensores y los sistemas de calefacción centralizada. El estudio del contexto urbano de sus obras permitió dar cuenta también de los procesos que estaban convirtiendo a las principales ciudades del país en urbes ‘modernas’. En este ámbito, destaca la nueva concepción urbanística que llegaba vinculada a los barrios-jardín, que contrariamente a lo establecido por el urbanismo tradicional, implicó inéditas maneras de articular la ciudad y el empleo de nuevas tipologías residenciales. Estas concepciones de ciudad encontraron eco principalmente en las urbanizaciones que se estaban realizando en las nuevas comunas de la capital, contexto elegido por el arquitecto para llevar a cabo algunos innovadores conjuntos habitacionales, hoy considerados modélicos, y que estaban destinados a un nuevo estrato social empoderado y demandante: la clase media. Su particular preocupación por las cuestiones sociales, las que entraron en crisis con el devenir del siglo XX, lo llevaron a desarrollar una activa vida política, que culminó con un importante puesto administrativo en el primer Gobierno Radical que tuvo lugar en el país. Desde esa posición, pudo gestionar y dar solución apropiada a la urgente necesidad de viviendas obreras que requería el país, creando los primeros edificios colectivos destinados a este grupo social. Esto a la vez supuso un acercamiento más sustancial a las nuevas propuestas vinculadas al Movimiento Moderno. En conclusión, su quehacer hizo eco de los estilos vanguardistas y modernos que arribaron provenientes de Europa, pero reconociendo las realidades propias del país, de tal forma que la apropiación, y no la reproducción, fue su sello. En este proceso de adecuación al medio local, los modelos foráneos se desprenderán de muchas de sus principios rectores originales, lo que sumado a la impronta de un imaginario propio y original, convierten a sus creaciones en un caso singular en el contexto del la arquitectura chilena. ABSTRACT This research aims to add value to the work of Chilean architect Luciano Kulczewski, a professional who accomplished a key and distinctive role in the first half of the twentieth century, which is considered as a crucial period for the development of the Chilean architecture, since it corresponds to the arrive of Modernity in this country. While his figure is widely recognized, only a portion of his oeuvre is known (or acknowledged) by national historiography. Because of his work as a freelance professional and another administrative and political position he held in his life, it is possible to assume a larger corpus, as it was finally confirmed by this study. The copious documented cadastre allowed convincingly to identify the role and significance that this work fulfilled in the transition that made possible leaving behind the values imposed by Academicism, and thus to incorporate the modernization processes in the different fields of architecture. Therefore, the work of Kulczewski revealed itself as exemplary and paradigmatic. One of the most eloquent illustrations to this regard was the pioneering construction of high-rise buildings with a residential purpose. This typology drove him to work with new materials and constructive techniques, alongside with the need of introducing new modern technologies required by these architectonical advances for its operations, like the use of elevators and central heating systems. The study of the urban context of his work allowed also accounting the processes the major cities of the country went through in order to become 'modern' cities. In this context, it stands out the new urban conception linked to the idea of garden city, which was contrary to the practices of the traditional urbanism, and that implied new ways of articulating the city and that the use of new residential typologies. These urban notions were mainly echoed in the urbanizations that were made in the new districts of the city, scenario chosen by the architect for the concretion of innovative housing projects, nowadays thought as paradigmatic, and that were oriented for a new empowered and demanding social group: the middle class. His particular concern for social issues, which ones came into crisis with the arrival of the twentieth century, led him to take an active political role, culminating with an important administrative position in the first Radical Government that took place in the country. From that position, he could manage and provide adequate solutions to the urgent worker’s housing needs that required the country, creating the first collective buildings for this social group. This supposed a more substantial approach to new proposals of the Modern Movement. To conclude, his oeuvre was influenced by the avant-garde and modern styles that arrived from Europe, but with the proper adjustments to the local requirements, so that it is possible to say that appropriation more than reproduction was his hallmark. In this process, these features were transformed in order to get more flexibility for their adaptation to the Chilean needs that added to a personal and peculiar imaginary, which transformed his works into a unique case in the national architecture history.

Percepción dispersa: Arquitectura y tactilidad en la sociedad de la comunicación

El tema de la tesis se centra en el pensamiento de Walter Benjamin y en el concepto de percepción distraída, desarrollado en el ensayo La obra de arte en la época de su reproducibilidad técnica (1936). El título percepción dispersa deriva de una profundización de los conceptos benjaminianos en términos lingüísticos, adoptando otros significados de la palabra distracción que relacionan este concepto a cuestiones de ámbito espacial y atmosférico. Benjamin sostiene que la arquitectura, en una época en la que se desarrollan y se difunden nuevas técnicas de reproducción/ comunicación, no se puede percibir solo de manera visual sino también táctil, interrelacionando la difusión de nuevas técnicas de reproducción, la tensión entre diferentes modalidades perceptivas y la arquitectura: según él, la dispersión de la vista a favor de la percepción táctil/háptica es un rasgo característico de una sociedad en la que se desarrollan y se difunden nuevas técnicas de reproducción. La tesis profundiza en estos temas, actualizando el concepto de distracción/dispersión para valorar las repercusiones de esta intuición en el ámbito de una parte de la producción arquitectónica contemporánea: se propone una contextualización histórica y una conceptual, relativas a los proyectos recientes de algunos de los autores que profundizan en el impacto de las nuevas tecnologías en el ámbito del proyecto de arquitectura. La hipótesis que se quiere demostrar es que se está desarrollando una tendencia que lleva proyectos o edificios de alto nivel tecnológico y informático desde un ámbito de (supuesto) predominio de la percepción visual, hasta una arquitectura que proporciona experiencias multisensoriales: espacios que se pueden medir con el movimiento, los músculos y el tacto, que desarrollan un conjunto de sensaciones táctiles/hápticas y no solo visuales. Finalmente se quiere verificar si, revertiendo siglos de evolución visual, la visión táctil y cercana siga siendo uno de los polos dialécticos que estructuran la experiencia de la arquitectura, como previsto por Benjamin hace 75 años. ABSTRACT The thesis focuses on the thought of Walter Benjamin and the concept of distracted perception, developed in the essay The Work of Art in the Age of Mechanical Reproduction (1936). The title derives from a linguistic approach to this concept which further explores the meaning of the word distraction, finally relating this kind of perception to spatial and atmospheric issues. Benjamin argues that architecture, thanks to the development of new reproduction/communication technologies, cannot be perceived exclusively in a visual way but also in a tactile way, interrelating new technologies of reproduction, perceptual modalities and architecture: according to him, the dispersion of the view in favor of tactile/ haptic perception is a fundamental characteristic of a technologically developed society. The thesis explores these issues, updating the concept of distraction/dispersion to assess its implications in the works of some architects that are exploring with their buildings the impact of new communication technologies in the field of architectural design. The hypothesis at the base of this work is that we are facing a new trend in this particular field: many of the most advanced buildings provide multisensory experience, and define spaces that can be better perceived with the sense of touch (haptic sense), going beyond a mere visual perception. Finally the thesis wants to verify if, reversing centuries of visual evolution, tactile and close vision remains one of the dialectical poles that stay at the base of the experience of architecture, as foreseen by Benjamin 75 years ago. ABSTRACT La tesi si basa sul pensiero di Walter Benjamin e sul concetto di percezione distratta, sviluppato nel saggio La opera d’arte nell’epoca della sua riproducibilità tecnica (1936). Il titolo, percezione dispersa, deriva da un approfondimento dei concetti benjaminiani in termini linguistici, adottando ulteriori significati della parola che il filosofo utilizza per indicare la distrazione e che relazionano questo termine a questioni di ambito spaziale ed atmosferico. Benjamin sostiene che l’architettura, in un’epoca nella quale si sviluppano e si diffondono nuove tecniche di riproduzione (o meglio: nuove tecnologie di comunicazione), non possa essere percepita solamente in maniera visuale, ma anche tattile, mettendo in relazione la diffusione di nuove tecnologie, la tensione tra differenti modalità percettive e l’architettura: secondo Benjamin, la dispersione della vista a favore di una ricezione tattile/aptica della realtà è una caratteristica tipica di quei momenti storici nei quali si manifestano grandi trasformazioni di ambito sociale e culturale dovute allo sviluppo di nuove tecnologie di comunicazione. La tesi approfondisce questi temi, aggiornando il concetto di distrazione/dispersione per valutarne le ripercussioni su una certa parte della produzione architettonica contemporanea: si propone una contestualizzazione storica ed una concettuale, relative ai progetti di alcuni architetti che lavorano da tempo sull’impatto delle nuove tecnologie nell’ambito del progetto di architettura. La ipotesi che si dimostra con questa tesi è che si sta sviluppando una contro-tendenza tattile, a seguito della quale molti degli edifici tecnologicamente ed informaticamente più avanzati strutturano la relazione con i propri utenti sulla base di esperienze multisensoriali, definendo spazi che possono essere percepiti attraverso una percezione aptica, piuttosto che visuale. In definitiva la tesi verifica che, superando secoli di evoluzione visuale, la visione tattile e ravvicinata e - più in generale - una percezione di tipo aptico continuano ad essere uno dei poli dialettici che strutturano l’esperienza dell’architettura, come previsto da Benjamin più di 75 anni fa.

New QR Survey Methodologies to Analyze User Perception of Service Quality in Public Transport: The Experience of Madrid

Customer Satisfaction Surveys (CSS) have become an important tool for public transport planners, as improvements in the perceived quality of service lead to greater use of public transport and lower traffic pollution. Until now, Intelligent Transportation System (ITS) enhancements in public transport have traditionally included fleet management systems based on Automatic Vehicle Location (AVL) technologies, which can be used to optimize routing and scheduling, and to feed real-time information into passenger information channels. However, surveys of public transport users could also benefit from the new information technologies. As most customers carry their smartphones when traveling, Quick Response (QR) codes open up the possibility of conducting these surveys at a lower cost.This paper contributes to the limited existing literature by developing the analysis of QR codes applied to CSS in public transport and highlighting their importance in reducing the cost of data collection and processing. The added value of this research is that it provides the first assessment of a real case study in Madrid (Spain) using QR codes for this purpose. This pilot experience was part of a research project analyzing bus service quality in the same case study, so the QR code survey (155 valid questionnaires) was validated using a conventional face-to-face survey (520 valid questionnaires). The results show clearly that, after overcoming a few teething troubles, this QR code application will ultimately provide transport management with a useful tool to reduce survey costs

Construction of Structures I in Moodle: a new teaching methodology in the Degree of Building Engineer

The subject of Construction of Structures I studies, from a constructive point of view and taking into account current legislation, reinforced concrete structures used in buildings, through the acquisition of knowledge and construction criteria required in the profession of a Technical Architect. The contents acquired in this course are essential for further professional development of technicians and are closely related to many of the subjects taught in the same or other courses of the Degree in Technical Architecture at the University of Alicante. The aim of this paper is to present, analyze and discuss the development of a new methodology proposed in the mentioned subject, as it supposed an important change in the traditional way of teaching Construction and Structures I. In order to incorporate new teaching tools in 2013-2014, the course has been implemented by using a Moodle software tool to promote blended learning with online exercises. Our Moodle community allows collaborative work within an open-source platform where teachers and students share a new and personalized learning environment. Students are easily used to the interface and the platform, value the constant connection with teachers or other fellows and completely agree with the possibility of making questions or share documents 24 hours a day. The proposed methodology consists of lectures and practical classes. In the lectures, the basics of each topic are discussed; class attendance, daily study and conducting scheduled exercises are indispensable. Practical classes allow to consolidate the knowledge gained in theory classes by solving professional exercises and actual construction problems related to structures, that shall be compulsorily delivered online. So, after the correction of the teacher and the subsequent feedback of students, practical exercises ensure lifelong learning of the student, who can download any kind of material at any time (constructive details, practical exercises and even corrected exams). Regarding the general evaluation system, goals achievement is assessed on an ongoing basis (65% of the final mark) along the course through written and graphic evidences in person and online, as well as a individual development of a workbook. In all cases, the acquisition of skills, the ability to synthesize, the capacity of logical and critical thinking are assessed. The other 35 % of the mark is evaluated by a complementary graphic exam. Participation in the computing platform is essential and the student is required to do and present, at least 90% of the practices proposed. Those who do not comply with the practices in each specific date could not be assessed continuously and may only choose the final exam. In conclusion, the subject of Construction of Structures I is essential in the development of the regulated profession of Technical Architect as they are considered, among other professional profiles, as specialists in construction of building structures. The use of a new communication platform and online teaching allows the acquisition of knowledge and constructive approaches in a continuous way, with a more direct and personal monitoring by the teacher that has been highly appreciated by almost 100% of the students. Ultimately, it is important to say that the use of Moodle in this subject is a very interesting tool, which was really well welcome by students in one of the densest and important subjects of the Degree of Technical Architecture.