Development And Use Of A Model To Predict Properties Of Infiltrated Solid Oxide Fuel Cell Anodes

Solid oxide fuel cells (SOFCs) provide a potentially clean way of using energy sources. One important aspect of a functioning fuel cell is the anode and its characteristics (e.g. conductivity). Using infiltration of conductor particles has been shown to be a method for production at lower cost with comparable functionality. While these methods have been demonstrated experimentally, there is a vast range of variables to consider. Because of the long time for manufacture, a model is desired to aid in the development of the desired anode formulation. This thesis aims to (1) use an idealized system to determine the appropriate size and aspect ratio to determine the percolation threshold and effective conductivity as well as to (2) simulate the infiltrated fabrication method to determine the effective conductivity and percolation threshold as a function of ceramic and pore former particle size, particle fraction and the cell¿s final porosity. The idealized system found that the aspect ratio of the cell does not affect the cells functionality and that an aspect ratio of 1 is the most efficient computationally to use. Additionally, at cell sizes greater than 50x50, the conductivity asymptotes to a constant value. Through the infiltrated model simulations, it was found that by increasing the size of the ceramic (YSZ) and pore former particles, the percolation threshold can be decreased and the effective conductivity at low loadings can be increased. Furthermore, by decreasing the porosity of the cell, the percolation threshold and effective conductivity at low loadings can also be increased

Uncovering poiesis : the role of production in technical communication, work, and public life

This dissertation is a report on a collaborative project between the Computer Science and the Humanities Departments to develop case studies that focus on issues of communication in the workplace, and the results of their use in the classroom. My argument is that case study teaching simulates real-world experience in a meaningful way, essentially developing a teachable way of developing phronesis, the reasoned capacity to act for the good in public. In addition, it can be read as a "how-to" guide for educators who may wish to construct their own case studies. To that end, I have included a discussion of the ethnographic methodologies employed, and how it was adapted to our more pragmatic ends. Finally, I present my overarching argument for a new appraisal of the concept of techné. This reappraisal emphasizes its productive activity, poiesis, rather than focusing on its knowledge as has been the case in the past. I propose that focusing on the telos, the end outside the production, contributes to the diminishment, if not complete foreclosure, of a rich concept of techné.

Evidence for distinct modes of solar activity

The Sun shows strong variability in its magnetic activity, from Grand minima to Grand maxima, but the nature of the variability is not fully understood, mostly because of the insufficient length of the directly observed solar activity records and of uncertainties related to long-term reconstructions. Here we present a new adjustment-free reconstruction of solar activity over three millennia and study its different modes. Methods. We present a new adjustment-free, physical reconstruction of solar activity over the past three millennia, using the latest verified carbon cycle, 14C production, and archeomagnetic field models. This great improvement allowed us to study different modes of solar activity at an unprecedented level of details. Results. The distribution of solar activity is clearly bi-modal, implying the existence of distinct modes of activity. The main regular activity mode corresponds to moderate activity that varies in a relatively narrow band between sunspot numbers 20 and 67. The existence of a separate Grand minimum mode with reduced solar activity, which cannot be explained by random fluctuations of the regular mode, is confirmed at a high confidence level. The possible existence of a separate Grand maximum mode is also suggested, but the statistics is too low to reach a confident conclusion. Conclusions. The Sun is shown to operate in distinct modes – a main general mode, a Grand minimum mode corresponding to an inactive Sun, and a possible Grand maximum mode corresponding to an unusually active Sun. These results provide important constraints for both dynamo models of Sun-like stars and investigations of possible solar influence on Earth’s climate.

Measurements of Production Properties of K0S mesons and Lambda hyperons in Proton-Carbon Interactions at 31 GeV/c

Spectra of K0S mesons and Λ hyperons were measured in p+C interactions at 31 GeV/c with the large acceptance NA61/SHINE spectrometer at the CERN SPS. The data were collected with an isotropic graphite target with a thickness of 4% of a nuclear interaction length. Interaction cross sections, charged pion spectra, and charged kaon spectra were previously measured using the same data set. Results on K0S and Λ production in p+C interactions serve as reference for the understanding of the enhancement of strangeness production in nucleus-nucleus collisions. Moreover, they provide important input for the improvement of neutrino flux predictions for the T2K long baseline neutrino oscillation experiment in Japan. Inclusive production cross sections for K0S and Λ are presented as a function of laboratory momentum in intervals of the laboratory polar angle covering the range from 0 up to 240 mrad. The results are compared with predictions of several hadron production models. The K0S mean multiplicity in production processes and the inclusive cross section for K0S production were measured and amount to 0.127 ± 0.005 (stat) ± 0.022 (sys) and 29.0 ± 1.6 (stat) ± 5.0 (sys) mb, respectively.

Measurement of ℤℤ production in pp collisions at sqrts=7 TeV and limits on anomalous ℤℤℤ ℤℤgamma couplings with the ATLAS detector

A measurement of the ZZ production cross section in proton-proton collisions at root s = 7 TeV using data recorded by the ATLAS experiment at the Large Hadron Collider is presented. In a data sample corresponding to an integrated luminosity of 4.6 fb(-1) collected in 2011, events are selected that are consistent either with two Z bosons decaying to electrons or muons or with one Z boson decaying to electrons or muons and a second Z boson decaying to neutrinos. The ZZ((*)) -> l(+)l(-)l'(+)l'(-) and ZZ -> l(+)l(-) nu(nu) over bar cross sections are measured in restricted phase-space regions. These results are then used to derive the total cross section for ZZ events produced with both Z bosons in the mass range 66 to 116 GeV, sigma(tot)(ZZ) = 6.7 +/- 0.7 (stat.) (+0.4)(-0.3) (syst.) +/- 0.3 (lumi.) pb, which is consistent with the Standard Model prediction of 5.89(-0.18)(+0.22) pb calculated at next-to-leading order in QCD. The normalized differential cross sections in bins of various kinematic variables are presented. Finally, the differential event yield as a function of the transverse momentum of the leading Z boson is used to set limits on anomalous neutral triple gauge boson couplings in ZZ production.

Development and Evaluation of a New Tablet Computer Application for the Therapy of Brain-Injured Patients with Aphasia

Introduction Language is the most important mean of communication and plays a central role in our everyday life. Brain damage (e.g. stroke) can lead to acquired disorders of lan- guage affecting the four linguistic modalities (i.e. reading, writing, speech production and comprehension) in different combinations and levels of severity. Every year, more than 5000 people (Aphasie Suisse) are affected by aphasia in Switzerland alone. Since aphasia is highly individual, the level of difficulty and the content of tasks have to be adapted continuously by the speech therapists. Computer-based assignments allow patients to train independently at home and thus increasing the frequency of ther- apy. Recent developments in tablet computers have opened new opportunities to use these devices for rehabilitation purposes. Especially older people, who have no prior experience with computers, can benefit from the new technologies. Methods The aim of this project was to develop an application that enables patients to train language related tasks autonomously and, on the other hand, allows speech therapists to assign exercises to the patients and to track their results online. Seven categories with various types of assignments were implemented. The application has two parts which are separated by a user management system into a patient interface and a therapist interface. Both interfaces were evaluated using the SUS (Subject Usability Scale). The patient interface was tested by 15 healthy controls and 5 patients. For the patients, we also collected tracking data for further analysis. The therapist interface was evaluated by 5 speech therapists. Results The SUS score are xpatients = 98 and xhealthy = 92.7 (median = 95, SD = 7, 95% CI [88.8, 96.6]) in case of the patient interface and xtherapists = 68 in case of the therapist interface. Conclusion Both, the patients and the healthy subjects, attested high SUS scores to the patient interface. These scores are considered as "best imaginable". The therapist interface got a lower SUS score compared to the patient interface, but is still considered as "good" and "usable". The user tracking system and the interviews revealed that there is room for improvements and inspired new ideas for future versions.

Aportes teóricos sobre el rol de la propiedad comunal en la transición al capitalismo

En el presente trabajo se propone un abordaje del rol de la propiedad comunal en la transición del feudalismo al capitalismo europeo a partir de la dinámica de desestructuración del modo de producción dominante. Partimos de la idea que la transición no implica la eliminación de los elementos que componen el modo de producción anterior, sino su permanencia y aún su fortalecimiento sobre bases modificadas. Este es el caso de la pervivencia de las formas campesinas de producción, dentro de las cuales la propiedad colectiva es una de sus bases de sostenimiento material más importantes. Sin embargo, este proceso es complejo y no está excento de ambigüedades. La corrupción interna de la comunidad aldeana, con la consiguiente proletarización parcial de su mano de obra se halla en estrecha relación con la ofensiva sobre los campos comunes. Sin embargo, en el período estudiado, el fenómeno no es absoluto, ya que al mismo tiempo que se da una progresiva pérdida de tierras por parte de los productores aldeanos, se refuerzan las relaciones feudales dentro de las cuales se ponen en explotación los suelos. Las contradicciones del desarrollo histórico obliga al historiador a una aproximación dialéctica que dé cuenta de esta particularidad. El diálogo crítico con los aportes teóricos de la sociología agraria y de la antropología rural sirven de estímulo para esta contribución.

Aportes teóricos sobre el rol de la propiedad comunal en la transición al capitalismo

En el presente trabajo se propone un abordaje del rol de la propiedad comunal en la transición del feudalismo al capitalismo europeo a partir de la dinámica de desestructuración del modo de producción dominante. Partimos de la idea que la transición no implica la eliminación de los elementos que componen el modo de producción anterior, sino su permanencia y aún su fortalecimiento sobre bases modificadas. Este es el caso de la pervivencia de las formas campesinas de producción, dentro de las cuales la propiedad colectiva es una de sus bases de sostenimiento material más importantes. Sin embargo, este proceso es complejo y no está excento de ambigüedades. La corrupción interna de la comunidad aldeana, con la consiguiente proletarización parcial de su mano de obra se halla en estrecha relación con la ofensiva sobre los campos comunes. Sin embargo, en el período estudiado, el fenómeno no es absoluto, ya que al mismo tiempo que se da una progresiva pérdida de tierras por parte de los productores aldeanos, se refuerzan las relaciones feudales dentro de las cuales se ponen en explotación los suelos. Las contradicciones del desarrollo histórico obliga al historiador a una aproximación dialéctica que dé cuenta de esta particularidad. El diálogo crítico con los aportes teóricos de la sociología agraria y de la antropología rural sirven de estímulo para esta contribución.

Aportes teóricos sobre el rol de la propiedad comunal en la transición al capitalismo

En el presente trabajo se propone un abordaje del rol de la propiedad comunal en la transición del feudalismo al capitalismo europeo a partir de la dinámica de desestructuración del modo de producción dominante. Partimos de la idea que la transición no implica la eliminación de los elementos que componen el modo de producción anterior, sino su permanencia y aún su fortalecimiento sobre bases modificadas. Este es el caso de la pervivencia de las formas campesinas de producción, dentro de las cuales la propiedad colectiva es una de sus bases de sostenimiento material más importantes. Sin embargo, este proceso es complejo y no está excento de ambigüedades. La corrupción interna de la comunidad aldeana, con la consiguiente proletarización parcial de su mano de obra se halla en estrecha relación con la ofensiva sobre los campos comunes. Sin embargo, en el período estudiado, el fenómeno no es absoluto, ya que al mismo tiempo que se da una progresiva pérdida de tierras por parte de los productores aldeanos, se refuerzan las relaciones feudales dentro de las cuales se ponen en explotación los suelos. Las contradicciones del desarrollo histórico obliga al historiador a una aproximación dialéctica que dé cuenta de esta particularidad. El diálogo crítico con los aportes teóricos de la sociología agraria y de la antropología rural sirven de estímulo para esta contribución.

(Table 1) Results of measurements of production characteristics of phytoplankton and some physical parameters of the environment in the northeastern Norwegian Sea in July 1995

From July 4 to 18,1995 surface chlorophyll a concentrations (C_cs) and integral primary production (C_ps) were studied in the northeastern part of the Norwegian Sea (73°42'N; 13°16'E), over a test area where an accident of the nuclear submarine Komsomolets had taken place. It was found that during this interval C_cs decreased by factor of about 3.3 (from 0.78 to 0.24 mg/m**3); average chlorophyll concentration within the photo-synthetic layer (C_cl) decreased by factor of about 3.5 (from 0.97 to 0.28 mg/m**3). The value of C_ps in the water column varied slightly (from 445 to 539 mg C/m**2 per day), since decrease in C_cl was compensated both by 1.5-fold growth of the photosynthetic layer thickness (from 40 to 60 m) and by 2.1-fold increase in its average assimilation number (from 0.58 to 1.20 mg C/mg chl a per hour). Monthly averages of C_ps were obtained from published data on seasonal C_cs changes and on the level of incident solar irradiation. They were found to be less than 100 mg C/m**2 per day in March and October and 100-500 mg C/m**2 per day in April-June. Annual primary production calculated from above values was equal to 105 g C/m**2.

Chapter 7 Clusters of Modern and Local Industries in Vietnam

Since the introduction of the Doi Moi ('renovation') economic reform in 1986, Vietnam has experienced a transformation of its economic management, from a central planning economy to a market-oriented economy. High economic growth, created by the liberalization of activities in all sectors of the economy, has changed the economic structure of the country, and the once agriculture-based and poverty-stricken land now generates a midlevel income and possesses many industrial bases. Economic growth has also changed the landscape of the country. Business complexes have been built in metropolises like Ho Chi Minh City and Hanoi, and rice fields have been converted into industrial zones. As the number of enterprises increased, areas began to emerge where many enterprises agglomerated. Some of these 'clusters' were groups of cottage industry households, while many others were large-scale industrial clusters. As Porter [1998] argues, industrial clusters are the source of a nation's 'competitive advantage'. McCarty et al. [2005] indicate that in some key industries in Vietnam, some clusters of enterprises have been created, although the degree of agglomeration differs from one industry to another. Using industry census data from 2001, they include dot density maps for the 12 leading manufacturing industries in Vietnam. They show that most of the industries analyzed are clustered either in Hanoi or Ho Chi Minh City (or both). Among these 12 industries, the garments industry has the greatest tendency to cluster, followed by textile, rice, seafood, and paper industries. The fact that industrial clusters have begun to form in some areas could be a positive sign for Vietnam's future economic development. What is lacking in McCarty et al. [2005], however, is the identification of the participants in the industrial clusters. Some argue for the importance of small and medium enterprises (SMEs) in Vietnam's economic development (e.g. Nguyen Tri Thanh [2007], Tran Tien Cuong et al. [2008]), while others stress the impact of foreign direct investments (FDI) (for example, Tuan Bui [2009]). Adding information about the participants in the above cluster study (and in other studies of spatial patterns of location of enterprises) may broaden the scope for analysis of economic development in Vietnam. This study aims to reveal the characteristics of industrial clusters in terms of their participants and locations. The findings of the study may provide basic information for evaluating the effects of agglomeration and the robustness of the effects in the industrial clusters in Vietnam. Section 1 describes the characteristics of economic entities in Vietnam such as ownership, size of enterprise, and location. Section 2 examines qualitative aspects of industrial clusters identified in McCarty et al. [2005] and uses information on the size and ownership of clusters. Three key industries (garments, consumer electronics, and motor vehicle) are selected for the study. Section 3 identifies another type of cluster commonly seen in Vietnam, composed of local industries and called 'craft villages'. Many such villages have been developed since the early 1990s. The study points out that some of these villages have become industrialized (or are becoming industrialized) by introducing modern modes of production and by employing thousands of laborers.

Integrated learning of production engineering software applications in a shipbuilding context

Acourse focused on the acquisition of integration competencies in ship production engineering, organized in collaboration with selected industry partners, is presented in this paper. The first part of the course is dedicated to Project Management: the students acquire skills in defining, using MS-PROJECT, the work breakdown structure (WBS), and the organization breakdown structure (OBS) in Engineering projects, through a series of examples of increasing complexity with the final one being the construction planning of a vessel. The second part of the course is dedicated to the use of a database manager, MS-ACCESS, in managing production related information.Aseries of increasing complexity examples is treated, the final one being the management of the piping database of a real vessel. This database consists of several thousand pipes, for which a production timing frame is defined connecting this part of the course with the first one. Finally, the third part of the course is devoted to working withFORAN,an Engineering Production application developed bySENERand widely used in the shipbuilding industry. With this application, the structural elements where all the outfittings will be located are defined through cooperative work by the students, working simultaneously in the same 3D model. In this paper, specific details about the learning process are given. Surveys have been posed to the students in order to get feedback from their experience as well as to assess their satisfaction with the learning process, compared to more traditional ones. Results from these surveys are discussed in the paper.

Descriptive study of production factors affecting performance traits in growing-finishing pgis in Spain.

The objective of this study was to build up a data set including productive performance and production factors data of growing-finishing (GF) pigs in Spain in order to perform a representative and reliable description of the traits of Spanish growing-finishing pig industry. Data from 764 batches from 452 farms belonging to nine companies (1,157,212 pigs) were collected between 2008 and 2010 through a survey including five parts: general, facilities, feeding, health status and performance. Most studied farms had only GF pigs on their facilities (94.7%), produced ‘industrial’ pigs (86.7%), had entire male and female (59.5%) and Pietrain-sired pigs (70.0%), housed between 13-20 pigs per pen (87.2%), had  50% of slatted floor (70%), single-space dry feeder (54.0%), nipple drinker (88.7%) and automatic ventilation systems (71.2%). A 75.0% of the farms used three feeding phases using mainly pelleted diets (91.0%), 61.3% performed three or more antibiotic treatments and 36.5% obtained water from the public supply. Continuous variables studied had the following average values: number of pigs placed per batch, 1,515 pigs; initial and final body weight, 19.0 and 108 kg; length of GF period, 136 days; culling rate, 1.4%; barn occupation, 99.7%; feed intake per pig and fattening cycle, 244 kg; daily gain, 0.657 kg; feed conversion ratio, 2.77 kg kg-1 and mortality rate, 4.3%. Data reflecting the practical situation of the Spanish growing and finishing pig production and it may contribute to develop new strategies in order to improve the productive and economic efficiency of GF pig units.