A relação inconsciente-consciente na produção do pensamento consciente

Tese de mestrado, Psicologia (Ciência Cognitiva), Universidade de Lisboa, Faculdade de Psicologia, Faculdade de Letras, Faculdade de Ciências, Faculdade de Medicina, 2016

Petrological and geochemical characteristics of DSDP Hole 37-334 gabbroic cumulates (Table 1)

The gabbronoritic cumulates drilled at DSDP Site 334 (Mid-Atlantic Ridge off the FAMOUS area) are neither crystallization products of the associated basalts, nor from any MORB composition documented along ocean ridges. Their parent melts are richer in SiO2 than MORB at a given MgO content, as attested by the crystallization sequence starting with an olivine+calcic and sub-calcic pyroxene assemblages. These melts are issued from a source highly depleted in incompatible elements, likely residual peridotite left after MORB extraction. To understand the role of water in the genesis of these lithologies whose occurrence in a mid-ocean ridge setting is rather puzzling, we performed a geochemical study on clinopyroxene separates following an analytical protocol able to remove the effects of water rock interactions post-dating their crystallization. Accordingly, the measured isotopic signatures can be used to trace magma sources. We find that Site 334 clinopyroxenes depart from the global mantle correlation: normal MORB values for the 143Nd/ 144Nd ratio (0.51307-0.51315) are associated to highly radiogenic 87Sr / 86Sr (0.7034-0.7067) ratios. This indicates that the parent melts of Site 334 cumulates are issued from a MORB source but that seawater contamination occurred at some stage of their genesis. The extent of contamination, traced by the Sr isotopic signature, is variable within all cumulates but more developed for gabbronorites sensus stricto, suggesting that seawater introduction was a continuous process during all the magmatic evolution of the system, from partial melting to fractional crystallization. Simple masse balance calculations are consistent with a contaminating agent having the characters of a highly hydrated (possibly water saturated) silica-rich melt depleted in almost all incompatible major, minor and trace elements relative to MORB. Mixing in various proportions of contaminated melts similar to the parent melts of Site 334 cumulates with MORB can account for part of the variability in the Sr isotopic signature of oceanic basalts, among other to the short wavelength isotopic "noise" superimposed on regional trends. We conclude that seawater introduction into residual peridotite at shallow depth beneath mid-ocean ridges can lead mantle rocks and their melts to follow complex P-T-fH2O paths that mimic petrogenetic contexts classically attributed to subduction zone environments, like the production of boninitic-andesitic magmas.

Helium research in support of superconducting power transmission : annual report for the period October 1, 1978-September 30, 1979 /

Includes bibliographical references.

An equation of state for fluid ethylene /

S/N 003-003-02351-5

Optimal control and operation of drum granulation processes

Process optimisation and optimal control of batch and continuous drum granulation processes are studied in this paper. The main focus of the current research has been: (i) construction of optimisation and control relevant, population balance models through the incorporation of moisture content, drum rotation rate and bed depth into the coalescence kernels; (ii) investigation of optimal operational conditions using constrained optimisation techniques; (iii) development of optimal control algorithms based on discretized population balance equations; and (iv) comprehensive simulation studies on optimal control of both batch and continuous granulation processes. The objective of steady state optimisation is to minimise the recycle rate with minimum cost for continuous processes. It has been identified that the drum rotation-rate, bed depth (material charge), and moisture content of solids are practical decision (design) parameters for system optimisation. The objective for the optimal control of batch granulation processes is to maximize the mass of product-sized particles with minimum time and binder consumption. The objective for the optimal control of the continuous process is to drive the process from one steady state to another in a minimum time with minimum binder consumption, which is also known as the state-driving problem. It has been known for some time that the binder spray-rate is the most effective control (manipulative) variable. Although other possible manipulative variables, such as feed flow-rate and additional powder flow-rate have been investigated in the complete research project, only the single input problem with the binder spray rate as the manipulative variable is addressed in the paper to demonstrate the methodology. It can be shown from simulation results that the proposed models are suitable for control and optimisation studies, and the optimisation algorithms connected with either steady state or dynamic models are successful for the determination of optimal operational conditions and dynamic trajectories with good convergence properties. (c) 2005 Elsevier Ltd. All rights reserved.

A new relaxation method for roll forming problems

Finite element analysis (FEA) of nonlinear problems in solid mechanics is a time consuming process, but it can deal rigorously with the problems of both geometric, contact and material nonlinearity that occur in roll forming. The simulation time limits the application of nonlinear FEA to these problems in industrial practice, so that most applications of nonlinear FEA are in theoretical studies and engineering consulting or troubleshooting. Instead, quick methods based on a global assumption of the deformed shape have been used by the roll-forming industry. These approaches are of limited accuracy. This paper proposes a new form-finding method - a relaxation method to solve the nonlinear problem of predicting the deformed shape due to plastic deformation in roll forming. This method involves applying a small perturbation to each discrete node in order to update the local displacement field, while minimizing plastic work. This is iteratively applied to update the positions of all nodes. As the method assumes a local displacement field, the strain and stress components at each node are calculated explicitly. Continued perturbation of nodes leads to optimisation of the displacement field. Another important feature of this paper is a new approach to consideration of strain history. For a stable and continuous process such as rolling and roll forming, the strain history of a point is represented spatially by the states at a row of nodes leading in the direction of rolling to the current one. Therefore the increment of the strain components and the work-increment of a point can be found without moving the object forward. Using this method we can find the solution for rolling or roll forming in just one step. This method is expected to be faster than commercial finite element packages by eliminating repeated solution of large sets of simultaneous equations and the need to update boundary conditions that represent the rolls.

O Trânsito Religioso e a Recomposição das Formas Religiosas na Igreja Evangélica Assembleia de Deus, Ministério São Bernardo do Campo

O campo religioso brasileiro apresenta, em sua configuração atual, uma formatação identitária extremamente diversa daquela observada em décadas anteriores. A partir dessa consideração, emerge uma problemática significativa - como compreender essas mudanças? Por que um cenário, antes extremamente resistente a transformações, agora se abre aos ventos modernizantes permitindo a recomposição de suas formas religiosas? Ora, a construção de novas identidades e a reordenação dos padrões religiosos podem ser compreendidas a partir do fenômeno do trânsito religioso, considerando ser possível iden-tificar na movimentação dos sujeitos uma dinâmica que estabelece alterações, tanto no caráter institucional e litúrgico dos grupos, bem como na vivência prática dos / das fiéis, promovendo inéditos e provisórios sistemas simbólicos. Diante da multiplicidade de oferta, os sujeitos apresentam uma mobilidade incessante num processo de ressignificação permanente, formando efêmeros mosaicos nos quais se distinguem múltiplas cores, formas, espaços, demandas, motivações, comportamentos, interesses, habitus, tradições, símbolos, disposições, estratégias, gostos e combinações. A partir dos postulados das Ciências da Religião, essa pesquisa propõe-se a analisar esse evento tendo como universo de observação a Igreja Evangélica Assembleia de Deus, Ministério São Bernardo do Campo. Objetiva demonstrar, mediante a interpretação do con-junto de dados obtidos em pesquisa de campo correlacionado com os fundamentos teóricos, a recomposição das formas religiosas institucionais e as novas identidades desenvolvidas pelos sujeitos a partir da mobilidade; estabelecer uma conexão entre os elementos indicadores da pesquisa e o fenômeno caracterizado para identificar quais são as motivações de gênero, classe, geracional e de etnia para o trânsito de homens e mulheres que circulam das mais diversas alternativas para esse grupo religioso e, considerando esse referencial, compreender como a instituição religiosa absorve esse fluxo de pessoas.

Marketing strategy and new product development in the UK credit card industry

The development of new products in today's marketing environment is generally accepted as a requirement for the continual growth and prosperity of organisations. The literature is consequently rich with information on the development of various aspects of good products. In the case of service industries, it can be argued that new service product development is of as least equal importance as it is to organisations that produce tangible goods products. Unlike the new goods product literature, the literature on service marketing practices, and in particular, new service product development, is relatively sparse. The main purpose of this thesis is to examine a number of aspects of new service product development practice with respect to financial services and specifically, credit card financial services. The empirical investigation utilises both a case study and a survey approach, to examine aspects of new service product development industry practice relating specifically to gaps and deficiencies in the literature with respect to the financial service industry. The findings of the empirical work are subsequently examined in the context in which they provide guidance and support for a new normative new service product development model. The study examines the UK credit card financial service product sector as an industry case study and perspective. The findings of the field work reveal that the new service product development process is still evolving, and that in the case of credit card financial services can be seen as a well-structured and well-documented process. New product development can also be seen as an incremental, complex, interactive and continuous process which has been applied in a variety of ways. A number of inferences are subsequently presented.

Adjusting to institutional realities: the 2006 NGO law and its effects on civil society in Russia

Key findings: The paper investigates the impact that the legislative changes of 2006 had on civil society in Russia. This legislation has change the regulatory environment in which civil society actors such as Third Sector Organisations operate. Using the past development of civil society organisations as well as insights about how the institutional environment influences this article illustrates: - the undemocratic nature and motivation of the law and how it exploits the structural weaknesses of civil society - how Third Sector Organisations rationalise and translate the legislative changes into their organisational realities and how this changed or did not change their behaviour - the shift in state-civil society relations away from liberal co-existence into more hierarchical arrangements were Third Sector Organisations are subordinated to the state. These trends have far reaching implications for civil society. The empirical evidence shows that state now manages civil society to meet its own political ends. It also shows that organisations in the field welcome the more engage and directive nature of the Russian state. Why is this important? What does it mean for business or other users? Are there policy implications? The research is important as it shows how Third Sector Organisations have reacted to the legislative changes. Further it provides a basis for interpretation of the potential future development of civil society. Additional it highlights how the continuous process of democratisation in transition economies sometimes might come unstuck. In particular donor agencies will need to consider these trends when disturbing funding to Third Sector Organisations.

New solid bases for biodiesel synthesis

Biodiesel is a promising non-toxic and biodegradable renewable fuel, synthesized by the homogeneous base-catalyzed transesterification of vegetable oils or animal fats with methanol or ethanol. Removal of the base, typically Na or K alkoxide, after reaction is a major problem since aqueous quenching results in stable emulsions and saponification. The use of a solid base catalyst offers several process advantages including the elimination of a quenching step (and associated basic water waste) to isolate the products, and the opportunity to operate in a continuous process. The synthesis and characterization of a series of Li-doped CaO and Mg-Al hydrotalcite solid base catalysts were presented and their physicochemical properties were correlated with their activity in biodiesel synthesis. Both catalysts were effective solid bases for the transesterification of triglycerides to the methyl ester, with catalyst activity related to the electronic properties of Li and Mg dopants. This is an abstract of a paper presented at the 230th ACS National Meeting (Washington, DC 8/28/2005-9/1/2005).

A high sensitivity long period grating Mach-Zehnder refractometer

A refractive index sensing system has been demonstrated, which is based upon an in-line fibre long period grating Mach-Zehnder interferometer with a heterodyne interrogation technique. This sensing system has comparable accuracy to laboratory-based techniques used in industry such as high performance liquid chromatography and UV spectroscopy. The advantage of this system is that measurements can be made in-situ for applications in continuous process control. Compared to other refractive index sensing schemes using LPGs, this approach has two main advantages. Firstly, the system relies on a simple optical interrogation system and therefore has the real potential for being low cost, and secondly, so far as we are aware it provides the highest refractive index resolution reported for any fibre LPG device.

Development of a technological innovation capability assessment model:a case study of manufacturing SMEs in Sialkot, Pakistan

Small and Medium Enterprises (SMEs) play an important part in the economy of any country. Initially, a flat management hierarchy, quick response to market changes and cost competitiveness were seen as the competitive characteristics of an SME. Recently, in developed economies, technological capabilities (TCs) management- managing existing and developing or assimilating new technological capabilities for continuous process and product innovations, has become important for both large organisations and SMEs to achieve sustained competitiveness. Therefore, various technological innovation capability (TIC) models have been developed at firm level to assess firms‘ innovation capability level. These models output help policy makers and firm managers to devise policies for deepening a firm‘s technical knowledge generation, acquisition and exploitation capabilities for sustained technological competitive edge. However, in developing countries TCs management is more of TCs upgrading: acquisitions of TCs from abroad, and then assimilating, innovating and exploiting them. Most of the TIC models for developing countries delineate the level of TIC required as firms move from the acquisition to innovative level. However, these models do not provide tools for assessing the existing level of TIC of a firm and various factors affecting TIC, to help practical interventions for TCs upgrading of firms for improved or new processes and products. Recently, the Government of Pakistan (GOP) has realised the importance of TCs upgrading in SMEs-especially export-oriented, for their sustained competitiveness. The GOP has launched various initiatives with local and foreign assistance to identify ways and means of upgrading local SMEs capabilities. This research targets this gap and developed a TICs assessment model for identifying the existing level of TIC of manufacturing SMEs existing in clusters in Sialkot, Pakistan. SME executives in three different export-oriented clusters at Sialkot were interviewed to analyse technological capabilities development initiatives (CDIs) taken by them to develop and upgrade their firms‘ TCs. Data analysed at CDI, firm, cluster and cross-cluster level first helped classify interviewed firms as leader, follower and reactor, with leader firms claiming to introduce mostly new CDIs to their cluster. Second, the data analysis displayed that mostly interviewed leader firms exhibited ‗learning by interacting‘ and ‗learning by training‘ capabilities for expertise acquisition from customers and international consultants. However, these leader firms did not show much evidence of learning by using, reverse engineering and R&D capabilities, which according to the extant literature are necessary for upgrading existing TIC level and thus TCs of firm for better value-added processes and products. The research results are supported by extant literature on Sialkot clusters. Thus, in sum, a TIC assessment model was developed in this research which qualitatively identified interviewed firms‘ TIC levels, the factors affecting them, and is validated by existing literature on interviewed Sialkot clusters. Further, the research gives policy level recommendations for TIC and thus TCs upgrading at firm and cluster level for targeting better value-added markets.

Annotated record of the detailed examination of Mn nodules recovered from the VA04 expedition (R/V Valdivia) in the Pacific Ocean

Twenty-four manganese nodules from the surface of the sea floor and fifteen buried nodules were studied. With three exceptions, the nodules were collected from the area covered by Valdivia Cruise VA 04 some 1200 nautical miles southeast of Hawaii. Age determinations were made using the ionium method. In order to get a true reproduction of the activity distribution in the nodules, they were cut in half and placed for one month on nuclear emulsion plates to determine the alpha-activity of the ionium and its daughter products. Special methods of counting the alpha-tracks resolution to depth intervals of 0.125 mm. For the first time it was possible to resolve zones of rapid growth (impulse growth) with growth rates, s > 50 mm/106 yr and interruptions in growth. With few exceptions the average rate of growth of all nodules was surprisingly uniform at 4-9 mm/10 yr. No growth could be recognized radioactively in the buried nodules. One exceptional nodule has had recent impulse growth and, in the material formed, the ionium is not yet in equilibrium with its daughter products. Individual layers in one nodule from the Indian Ocean could be dated and an average time interval of t = 2600±400 yr was necessary to form one layer. The alternation between iron and manganese-rich parts of the nodules was made visible by colour differences resulting from special treatment of cut surfaces with HCl vapour. The zones of slow growth of one nodule are relatively enriched in iron. Earlier attempts to find paleomagnetic reversals in manganese nodules have been continued. Despite considerable improvement in areal resolution, reversals were not detected in the nodules studied. Comparisons of the surface structure, microstructure in section and the radiometric dating show that there are erosion surfaces and growth surfaces on the outer surfaces of the manganese nodules. The formation of cracks in the nodules was studied in particular. The model of age-dependent nodule shrinkage and cracking surprisingly indicates that the nodules break after exceeding a certain age and/or size. Consequently, the breaking apart of manganese nodules is a continuous process not of catastrophic or discontinuous origin. The microstructure of the nodules exhibits differences in the mechanism of accretion and accretion rate of material, shortly referred to as accretion form. Thus non-directional growth inside the nodules as well as a directional growth may be observed. Those nodules with large accretion forms have grown faster than smaller ones. Consequently, parallel layers indicate slow growth. The upper surfaces of the nodules, protruding into the bottom water appear to be more prone to growth disturbances than the lower surfaces, immersed in the sediment. Features of some nodules show, that as they develop, they neither turned nor rolled. Yet unknown is the mechanism that keeps the nodules at the surface during continuous sedimentation. All in all, the nodules remain the objects of their own distinctive problems. The hope of using them as a kind of history book still seems to be very remote.

A figuratividade nas histórias em quadrinhos: uma análise das construções metafóricas e metonímicas em V de vingança

The object of this study is the construction of metaphor and metonymy in comics. This work is inserted in the field of Embodied Cognitive Linguistics, specifically based on the Neural Theory of Language (FELDMAN, 2006) and, consistent with this theoretical and methodological framework, the notions of categorization (LAKOFF & JOHNSON, 1999), embodiment (GIBBS, 2005), figurativity (GIBBS, 1994; BERGEN, 2005), and mental simulation (BARSALOU, 1999; FELDMAN, 2006) have also been used. The hypothesis defended is that the construction of figurativity in texts consisting of verbal and nonverbal mechanisms is linked to the activation of neural structures related to our actions and perceptions. Thus, language is considered a cognitive faculty connected to the brain apparatus and to bodily experiences, in such a way that it provides samples of the continuous process of meaning (re)construction performed by the reader, whom (re)defines his or her views about the world as certain neural networks are (or stop being) activated during linguistic processing. The data obtained during the analysys shows that, as regards comics, the act of reading together the graphics and verbal language seems to have an important role in the construction of figurativity, including cases of metaphors which are metonymically motivated. These preliminary conclusions were drawn from the data analysis taken from V de Vingança (MOORE; LLOYD, 2006). The corpus study was guided by the methodology of introspection, i.e., the individual analysis of linguistic aspects as manifested in one's own cognition (TALMY, 2005).

A morte pode ser conhecida: percurso em torno da compreensão da mortalidade na filosofia de Epicuro

This paper intends to investigate the route required for the formation of adequate knowledge of death based on analysis of the philosophy of Epicurus. The central hypothesis is to demonstrate that the understanding of death can only be achieved through a continuous process of research into the nature of things, guided reflection within a system of thought, with radical impact on the conceptions of the universe, man, soul and world. The human mortality can only become clear to the man himself through philosophy. Epicurus developed his thinking so that when investigating the nature, man could understand the principles of the constitution of all things. This raises issues about the consequences of knowledge generation and corruption in human life, the most disturbing of them is death. The vain opinions are considered the causes of evils, the proper knowledge of death is one way of purging the disturbances that the souls of men, thereby promoting the wisdom philosophy combines knowledge to health. Strictly speaking advocate, confirmed the relevance of the connections mentioned above, the problem of knowledge of the nature of death is one of the privileged ways to demonstrate the coherence and unity of the philosophy of Epicurus