TIMS measurements of full range of natural Ca isotopes with internally consistent fractionation correction

This study presents static measurements of the Ca isotopic composition of standard reference materials SRM 915 a/b on a Triton Plus™ thermal ionization mass spectrometer with a specially developed Faraday cup array allowing simultaneous measurement of 40Ca and 48Ca. The total amount of Ca in all analyses was kept < 1 µg. With this setup the measurement uncertainties were 0.06 ‰ for 40Ca/44Ca and 0.12 ‰ for 48Ca/40Ca. Measuring all isotopes simultaneously better allows to test the internal consistency of different Ca isotope abundances reported in the literature. The exponential law was observed to correct incompletely instrumental mass fractionation. An improved fractionation correction based on the exponential law is proposed. It changes the 40Ca/44Ca ratio of SRM 915a (corrected relative to 42Ca/44Ca = 0.31221; 48Ca/44Ca = 0.08871) from 47.1635 ± 0.0028 to 47.1649 ± 0.0047. The measurements of SRM 915b were performed with different analytical conditions (runs were prolonged till complete filament load depletion). Even if the 40Ca/44Ca ratio of SRM 915b, when corrected with the simple exponential law, appears different (47.1532 ± 0.0038) from that of SRM 915a, it becomes coincident (47.1613 ± 0.0028) when corrected with a second-order refinement. This supports the use of the improved exponential law to obtain internally consistent Ca isotope ratio for natural samples.

The Making of Optimal and Consistent Policy: An Analytical Framework for Monetary Models

This paper shows that optimal policy and consistent policy outcomes require the use of control-theory and game-theory solution techniques. While optimal policy and consistent policy often produce different outcomes even in a one-period model, we analyze consistent policy and its outcome in a simple model, finding that the cause of the inconsistency with optimal policy traces to inconsistent targets in the social loss function. As a result, the central bank should adopt a loss function that differs from the social loss function. Carefully designing the central bank s loss function with consistent targets can harmonize optimal and consistent policy. This desirable result emerges from two observations. First, the social loss function reflects a normative process that does not necessarily prove consistent with the structure of the microeconomy. Thus, the social loss function cannot serve as a direct loss function for the central bank. Second, an optimal loss function for the central bank must depend on the structure of that microeconomy. In addition, this paper shows that control theory provides a benchmark for institution design in a game-theoretical framework.

The Making of Optimal and Consistent Policy: An Implementation Theory Framework for Monetary Policy

This paper shows that optimal policy and consistent policy outcomes require the use of control-theory and game-theory solution techniques. While optimal policy and consistent policy often produce different outcomes even in a one-period model, we analyze consistent policy and its outcome in a simple model, finding that the cause of the inconsistency with optimal policy traces to inconsistent targets in the social loss function. As a result, the social loss function cannot serve as a direct loss function for the central bank. Accordingly, we employ implementation theory to design a central bank loss function (mechanism design) with consistent targets, while the social loss function serves as a social welfare criterion. That is, with the correct mechanism design for the central bank loss function, optimal policy and consistent policy become identical. In other words, optimal policy proves implementable (consistent).

Consistent Targets and Optimal Monetary Policy: A Note

Kydland and Prescott (1977) develop a simple model of monetary policy making, where the central bank needs some commitment technique to achieve optimal monetary policy over time. Although not their main focus, they illustrate the difference between consistent and optimal policy in a sequential-decision one-period world. We employ the analytical method developed in Yuan and Miller (2005), whereby the government appoints a central bank with consistent targets or delegates consistent targets to the central bank. Thus, the central bank s welfare function differs from the social welfare function, which cause consistent policy to prove optimal.

Social and behavioral determinants of consistent condom use among female commercial sex workers (FCSWs) in Ghana

This study aims at investigating the social and behavioral predictors of consistent condom use among female commercial sex workers (FCSWs) in Ghana. Street commercial sex workers were interviewed in Accra, Kumasi and Techiman. Whereas respondents had attained certain accurate knowledge about HIV transmission routes, misconceptions were still commonly reported. The level of condom education was very low (14%), however consistent condom use (all the time) with clients was relatively high (49.6%), 38.89% reported using condom sometimes and 11.56% reported never using condoms. ^ 277 of the respondent ants did not use condoms all the time. 163 of them reported not using condoms due to refusal by their clients, the remaining 64 respondents did not even request their clients to use condom due to cultural perception of power, lack of authority and the fear of loosing clients. ^ Significant predictive factors associated with consistency of condom use among FCSWs in a multivariate analysis were; age, level of education, religion, and number of customers. Some of the major obstacles to condom use by the FCSWs were refusal by clients, availability of free condoms, trying to communicate trust to their clients, and the lack of empowerment to negotiate safer sex with clients. Some of the respondents may have developed a false sense of safety by subjectively assessing whether their clients were well and do not look sick, but they were unaware that HIV carriers may show no obvious symptoms of illness at all. ^ In summary, this study points to an urgent need for reestablishing effective prevention intervention and some insights of what is required of such program in Ghana. ^

Consistent increase in dimethyl sulfide (DMS) in response to high CO2 in five shipboard bioassays from contrasting NW European waters

The ubiquitous marine trace gas dimethyl sulfide (DMS) comprises the greatest natural source of sulfur to the atmosphere and is a key player in atmospheric chemistry and climate. We explore the short-term response of DMS production and cycling and that of its algal precursor dimethyl sulfoniopropionate (DMSP) to elevated carbon dioxide (CO2) and ocean acidification (OA) in five 96 h shipboard bioassay experiments. Experiments were performed in June and July 2011, using water collected from contrasting sites in NW European waters (Outer Hebrides, Irish Sea, Bay of Biscay, North Sea). Concentrations of DMS and DMSP, alongside rates of DMSP synthesis and DMS production and consumption, were determined during all experiments for ambient CO2 and three high-CO2 treatments (550, 750, 1000 µatm). In general, the response to OA throughout this region showed little variation, despite encompassing a range of biological and biogeochemical conditions. We observed consistent and marked increases in DMS concentrations relative to ambient controls (110% (28-223%) at 550 µatm, 153% (56-295%) at 750 µatm and 225% (79-413%) at 1000 µatm), and decreases in DMSP concentrations (28% (18-40%) at 550 µatm, 44% (18-64%) at 750 µatm and 52% (24-72%) at 1000 µatm). Significant decreases in DMSP synthesis rate constants (µDMSP /d) and DMSP production rates (nmol/d) were observed in two experiments (7-90% decrease), whilst the response under high CO2 from the remaining experiments was generally indistinguishable from ambient controls. Rates of bacterial DMS gross consumption and production gave weak and inconsistent responses to high CO2. The variables and rates we report increase our understanding of the processes behind the response to OA. This could provide the opportunity to improve upon mesocosm-derived empirical modelling relationships and to move towards a mechanistic approach for predicting future DMS concentrations.

Towards the Compilation of a Consistent Asian International I-O Table--The Report of the General Survey on National I-O Tables--

This paper reports on the survey of the characteristic features of national input-output tables compiled by the member countries of the Asian International Input-Output Table project. In making any inter-regional tables, the presentation format of each constituent table has to be carefully studied in order to design a common adjustment rule. The survey was conducted in the period of 2003-04, with invaluable cooperation from each collaborating institution of the project. Some analytical findings are drawn from the survey results, such as the similarity between each national table and the Japanese table, the responsiveness to the 1993 SNA, and the major areas of conflict regarding the presentation format.

Spatial price equilibrium and the transport sector : a trade-consistent SCGE model

This paper presents a framework for an SCGE model that is compatible with the Armington assumption and explicitly considers transport activities. In the model, the trade coefficient takes the form of a potential function,and the equilibrium market price becomes similar to the price index of varietal goods in the context of new economic geography (NEG). The features of the model are investigated by using the minimal setting, which comprises two non-transport sectors and three regions. Because transport costs are given exogenously to facilitate study of their impacts, commodity prices are also determined relative to them. The model can be described as a system of homogeneous equations, where an output in one region can arbitrarily be determined similarly as a price in the Walrasian equilibrium. The model closure is sensitive to formulation consistency so that homogeneity of the system would be lost by use of an alternative form of trade coefficients.

Adjustment methods of national input-output tables for harmonized and consistent multi-regional input-output databases

Despite the fact that input–output (IO) tables form a central part of the System of National Accounts, each individual country's national IO table exhibits more or less different features and characteristics, reflecting the country's socioeconomic idiosyncrasies. Consequently, the compilers of a multi-regional input–output table (MRIOT) are advised to thoroughly examine the conceptual as well as methodological differences among countries in the estimation of basic statistics for national IO tables and, if necessary, to carry out pre-adjustment of these tables into a common format prior to the MRIOT compilation. The objective of this study is to provide a practical guide for harmonizing national IO tables to construct a consistent MRIOT, referring to the adjustment practices used by the Institute of Developing Economies, JETRO (IDE-JETRO) in compiling the Asian International Input–Output Table.

Thermodinamically consistent dynamic formulation of discrete thermoviscoelastic elements

Metodología para integrar numéricamente de forma termodinámicamente consistente las ecuaciones del problema termomecánico acoplado de un elemento discreto viscoso.

Self-consistent numerical dispersion relation of the ablative Rayleigh-Taylor instability of double ablation fronts in inertial confinement fusion

The linear stability analysis of accelerated double ablation fronts is carried out numerically with a self-consistent approach. Accurate hydrodynamic profiles are taken into account in the theoretical model by means of a fitting parameters method using 1D simulation results. Numerical dispersión relation is compared to an analytical sharp boundary model [Yan˜ez et al., Phys. Plasmas 18, 052701 (2011)] showing an excellent agreement for the radiation dominated regime of very steep ablation fronts, and the stabilization due to smooth profiles. 2D simulations are presented to validate the numerical self-consistent theory.

Self-consistent resonance absorption with two layer profile steepening

Resonance absorption of p-polarized light, incident at angle 6 on a flowing, stratified plasma, is analyzed; profile steepening within (i) a layer around the turning point, and (ii) a thinner,embedded sublayer at the critical surface is taken into account self-consistently. The entire steepened region is taken as collisionless and isothermal. The structure of the main layer shows a variety of regimes, depending on how the flow crosses a sonic point. The structure of the sublayer is also determined; it is entirely subsonic (with no wave breaking) for a well-defined,broad parameter range. Density changes across both layer and sublayer, and fractional absorption, are given in terms of [(wavelength)2 Xintensity/temperature], and (temperature/mec2). The flow outside the double structure is also analyzed for particular conditions.

Self-consistent, nonlocal electron heat flux at arbitrary ion charge number

A single, nonlocal expression for the electron heat flux, which closely reproduces known results at high and low ion charge number 2, and “exact” results for the local limit at all 2, is derived by solving the kinetic equation in a narrow, tail-energy range. The solution involves asymptotic expansions of Bessel functions of large argument, and (Z-dependent)order above or below it, corresponding to the possible parabolic or hyperbolic character of the kinetic equation; velocity space diffusion in self-scattering is treated similarly to isotropic thermalization of tail energies in large Z analyses. The scale length H characterizing nonlocal effects varies with Z, suggesting an equal dependence of any ad hoc flux limiter. The model is valid for all H above the mean-free path for thermal electrons.

Some consistent finite element formulations of 1-D beam models: a comparative study

A consistent Finite Element formulation was developed for four classical 1-D beam models. This formulation is based upon the solution of the homogeneous differential equation (or equations) associated with each model. Results such as the shape functions, stiffness matrices and consistent force vectors for the constant section beam were found. Some of these results were compared with the corresponding ones obtained by the standard Finite Element Method (i.e. using polynomial expansions for the field variables). Some of the difficulties reported in the literature concerning some of these models may be avoided by this technique and some numerical sensitivity analysis on this subject are presented.