Influence of Soil and Irrigation Management on the Quality of Seedless Crimson Table Grapes

The market for table grapes is moving into mass production of specialty seed-less grapes in covered areas, aiming at obtaining premium prices with early or late production of high quality products. Production of quality seedless grapes is not straightforward since it is requires the correct combination of various independent characteristics, such as color, sugars, size and quantity at the right moment for successful harvesting and marketing. The present study was carried out at the two largest Portuguese producers located in Alentejo, and has the objective of studying the effect of irrigation management strategies and two different soils on the various relevant parameters for successful production and marketing. The management strategies were the application of ten day stress at the end of the cycle, in order to promote early maturing of the grapes. Three different timings of the stress were applied. Soil moisture, sap flow, bark thickness, as well as leaf water potential, stomatal conductance and chlorophyll content were measured regularly during the production season. The results indicate that the roots explore a rather large soil volume and the plants can successfully withstand reasonable periods of drought without significant changes to the plant physiology. Additionally late rains can mask the effect of any farmer applied drought and invalidate any farmer induced stress to the plants. Water-logged soils tend to cause early onset of maturity, but cause the ripening stage to extend over a longer period of time, and thus, in effect result in a delay in the harvest date. Topography also has some effect on the ripening, since hot air tends to accumulate under the plastic at the higher areas of the field. This work is funded by PRODER, 4.1, within the scope of project MORECRIMSON

Inoculation with Metal-Mobilizing Plant-GrowthPromoting Rhizobacterium Bacillus sp. SC2b and Its Role in Rhizoremediation

A plant growth-promoting bacterial (PGPB) strain SC2b was isolated from the rhizosphere of Sedum plumbizincicola grown in lead (Pb)/zinc (Zn) mine soils and characterized as Bacillus sp. based on (1) morphological and biochemical characteristics and (2) partial 16S ribosomal DNA sequencing analysis. Strain SC2b exhibited high levels of resistance to cadmium (Cd) (300 mg/L), Zn (730 mg/L), and Pb (1400 mg/L). This strain also showed various plant growth-promoting (PGP) features such as utilization of 1-aminocyclopropane-1-carboxylate, solubilization of phosphate, and production of indole-3-acetic acid and siderophore. The strain mobilized high concentration of heavy metals from soils and exhibited different biosorption capacity toward the tested metal ions. Strain SC2b was further assessed for PGP activity by phytagar assay with a model plant Brassica napus. Inoculation of SC2b increased the biomass and vigor index of B. napus. Considering such potential, a pot experiment was conducted to assess the effects of inoculating the metal-resistant PGPB SC2b on growth and uptake of Cd, Zn and Pb by S. plumbizincicola in metal-contaminated agricultural soils. Inoculation with SC2b elevated the shoot and root biomass and leaf chlorophyll content of S. plumbizincicola. Similarly, plants inoculated with SC2b demonstrated markedly higher Cd and Zn accumulation in the root and shoot system, indicating that SC2b enhanced Cd and Zn uptake by S. plumbizincicola through metal mobilization or plant-microbial mediated changes in chemical or biological soil properties. Data demonstrated that the PGPB Bacillus sp. SC2b might serve as a future biofertilizer and an effective metal mobilizing bioinoculant for rhizoremediation of metal polluted soils.

Characterization of microalgae native to Quebec for biofuel production.

La production de biodiésel par des microalgues est intéressante à plusieurs niveaux. Dans le premier chapitre, un éventail de pour et contres concernant l’utilisation de microalgues pour la production de biocarburant sont ici révisés. La culture d’algues peut s'effectuer en utilisant des terres non-arables, de l’eau non-potable et des nutriments de base. De plus, la biomasse produite par les algues est considérablement plus importante que celle de plantes vasculaires. Plusieurs espèces on le contenu lipidique en forme de triacylglycérols (TAGs), qui peut correspondre jusqu'à 30% - 40% du poids sec de la biomasse. Ces proportions sont considérablement plus élevées que celui des huiles contenues dans les graines actuellement utilisées pour le biodiésel de première génération. Par contre, une production pratique et peu couteuse de biocarburant par des microalgues requiert de surpasser plusieurs obstacles. Ceci inclut le développement de systèmes de culture efficace à faible coût, de techniques de récupération requérant peu d’énergie, et de méthodes d’extraction et de conversion de l’huile non-dommageables pour l’environnement et peu couteuses. Le deuxième chapitre explore l'une des questions importantes soulevées dans le premier chapitre: la sélection d'une souche pour la culture. Une collection de souches de microalgues d'eau douce indigène au Québec a été établi et examiné au niveau de la diversité physiologique. Cette collection est composée de cent souches, que apparaissaient très hétérogènes en terme de croissance lorsque mises en culture à 10±2 °C ou 22±2 °C sur un effluent secondaire d’une usine municipale de traitement des eaux usées (EU), défini comme milieu Bold's Basal Medium (BBM). Des diagrammes de dispersion ont été utilisés pour étudier la diversité physiologique au sein de la collection, montrant plusieurs résultats intéressants. Il y avait une dispersion appréciable dans les taux de croissance selon les différents types de milieux et indépendamment de la température. De manière intéressante, en considérant que tous les isolats avaient initialement été enrichis sur milieu BBM, la distribution était plutôt symétrique autour de la ligne d’iso-croissance, suggérant que l’enrichissement sur BBM n’a pas semblé biaiser la croissance des souches sur ce milieu par rapport aux EU. Également, considérant que les isolats avaient d’abord été enrichis à 22°C, il est assez surprenant que la distribution de taux de croissance spécifiques soit aussi symétrique autour de la ligne d’iso-croissance, avec grossièrement des nombres égaux d’isolats de part et d’autre. Ainsi, l’enrichissement à 22°C ne semble pas biaiser les cellules vers une croissance à cette température plutôt que vers 10°C. Les diagrammes de dispersion obtenus lorsque le pourcentage en lipides de cultures sur BBM ont été comparées à des cultures ayant poussé sur EU soit à 10°C ou 22°C rendent évident que la production de lipides est favorisée par la culture sur EU aux deux températures, et que la production lipidique ne semble pas particulièrement plus favorisée par l’une ou l’autre de ces températures. Lorsque la collection a été examinée pour y déceler des différences avec le site d’échantillonnage, une analyse statistique a montré grossièrement que le même degré de diversité physiologique était retrouvé dans les échantillons des deux différents sites. Le troisième chapitre a poursuivi l'évaluation de la culture d'algues au Québec. L’utilisation de déchets industriels riches en nutriments minéraux et en sources de carbone pour augmenter la biomasse finale en microalgues et le produit lipidique à faible coût est une stratégie importante pour rendre viable la technologie des biocarburants par les algues. Par l’utilisation de souches de la collection de microalgues de l’Université de Montréal, ce rapport montre pour la première fois que des souches de microalgues peuvent pousser en présence de xylose, la source de carbone majoritairement retrouvée dans les eaux usées provenant des usines de pâte et papier, avec une hausse du taux de croissance de 2,8 fois par rapport à la croissance photoautotrophe, atteignant jusqu’à µ=1,1/jour. En présence de glycérol, les taux de croissance atteignaient des valeurs aussi élevées que µ=1,52/jour. La production lipidique augmentait jusqu’à 370% en présence de glycérol et 180% avec le xylose pour la souche LB1H10, démontrant que cette souche est appropriée pour le développement ultérieur de biocarburants en culture mixotrophe. L'ajout de xylose en cultures d'algues a montré certains effets inattendus. Le quatrième chapitre de ce travail a porté à comprendre ces effets sur la croissance des microalgues et la production de lipides. Quatre souches sauvages indigènes ont été obersvées quotidiennement, avant et après l’ajout de xylose, par cytométrie en flux. Avec quelques souches de Chlorella, l’ajout de xylose induisait une hausse rapide de l’accumulation de lipide (jusqu’à 3,3 fois) pendant les premières six à douze heures. Aux temps subséquents, les cellules montraient une diminution du contenu en chlorophylle, de leur taille et de leur nombre. Par contre, l’unique membre de la famille des Scenedesmaceae avait la capacité de profiter de la présence de cette source de carbone sous culture mixotrophe ou hétérotrophe sans effet négatif apparent. Ces résultats suggèrent que le xylose puisse être utilisé avant la récolte afin de stimuler l’augmentation du contenu lipidique de la culture d’algues, soit en système de culture continu ou à deux étapes, permettant la biorestauration des eaux usées provenant de l’industrie des pâtes et papiers. Le cinquième chapitre aborde une autre déché industriel important: le dioxyde de carbone et les gaz à effet de serre. Plus de la moitié du dioxyde de carbone qui est émis dans l'atmosphère chaque jour est dégagé par un processus stationnaire, soit pour la production d’électricité ou pour la fabrication industrielle. La libération de CO2 par ces sources pourrait être atténuée grâce à la biorestauration avec microalgues, une matière première putative pour les biocarburants. Néanmoins, toutes les cheminées dégagent un gaz différent, et la sélection des souches d'algues est vitale. Ainsi, ce travail propose l'utilisation d’un état de site particulier pour la bioprospection de souches d'algues pour être utilisé dans le processus de biorestauration. Les résultats montrent que l'utilisation d'un processus d'enrichissement simple lors de l'étape d'isolement peut sélectionner des souches qui étaient en moyenne 43,2% mieux performantes dans la production de biomasse que les souches isolées par des méthodes traditionnelles. Les souches isolées dans ce travail étaient capables d'assimiler le dioxyde de carbone à un taux supérieur à la moyenne, comparées à des résultats récents de la littérature.

The influence of commercial film-forming polymers on reducing salt spray injury in evergreen oak (Quercus ilex L.) and laurel (Prunus laurocerasus L.)

A field trial was undertaken to determine the influence of four commercially available film-forming polymers (Bond [alkyl phenyl hydroxyl polyoxyethylene], Newman Crop Spray 11E™ [paraffinic oil], Nu-Film P [poly-1-p menthene], and Spray Gard [di-1-p menthene]) on reducing salt spray injury on two woody species, evergreen oak (Quercus ilex L.) and laurel (Prunus laurocerasus L.). Irrespective of species, the film-forming polymers Nu-Film-P and Spay Gard did not provide any significant degree of protection against salt spray damage irrespective of concentration (1% or 2%) applied as measured by leaf chlorophyll concentrations, photosynthetic efficiency, visual leaf necrosis, foliar sodium and chloride content, and growth (height, leaf area). The film-forming polymer Newman Crop Spray 11E™ provided only 1-week protection against salt spray injury. The film-forming polymer Bond provided a significant (P < 0.05) degree of protection against salt spray injury 3 months after application as manifest by higher leaf chlorophyll content, photosynthetic efficiency, height and leaf area, and lower visual leaf necrosis and foliar Na and Cl content compared with nontreated controls. In conclusion, results indicate that application of a suitable film-forming polymer can provide a significant degree of protection of up to 3 months against salt spray injury in evergreen oak and laurel. Results also indicate that when applied at 1% or 2% solutions, no problems associated with phytotoxicity and rapid degradation on the leaf surface exist.

Effects of cultural system (organic and conventional) on growth, photosynthesis and yield components of sweet corn (zea mays L.) under semi-arid environment

Organic sweet maize consists of a new industrial crop product. Field experiment was conducted to determine the effects of cultural systems on growth, photosynthesis and yield components of sweet maize crop (Zea mays L. F-1 hybrid 'Midas'). A randomized complete block design was employed with four replicates per treatment (organic fertilization: cow manure (5, 10 and 20 t ha(-1)), poultry manure (5, 10 and 20 t ha(-1)) and barley mulch (5, 10 and 20 t ha(-1)), synthetic fertilizer (240 kg N ha(-1)): 21-0-0 and control). The lowest dry weight, height and leaf area index and sod organic matter were measured in the control treatment. Organic matter content was proportionate to the amount of manure applied. The control plots had the lowest yield (1593 kg ha(-1)) and the double rate cow manure plots the had,greatest one. (6104 kg ha(-1)). High correlation between sweet corn yield and organic matter was registered. Moreover, the lowest values of 1000-grain weight were obtained with control plot. The fertilizer plot gave values which were similar to the full rate cow manure treatment. The photosynthetic race of the untreated control was significantly lower than that of the other treatments. The phorosynthetic rate increased as poultry manure and barley mulch ram decreased and as cow manure increased. Furthermore the untreated control had the lowest stomatal conductance and chlorophyll content. Our results indicated that sweet corn growth and yield in the organic plots was significantly higher than those in the conventional plots.

Evaluation of film forming polymers to control apple scab (Venturia inaequalis (Cooke) G. Wint.) under laboratory and field conditions

A detached leaf bioassay was used to determine the influence of several film forming polymers and a conventional triazole fungicide on apple scab (Venturia inaequalis (Cooke) G. Wint.) development under laboratory in vitro conditions, supported by two field trials using established apple cv. Golden Delicious to further assess the efficacy of foliar applied film forming polymers as scab protectant compounds. All film forming polymers used in this investigation (Bond, Designer, Nu-Film P, Spray Gard, Moisturin, Companion PCT12) inhibited germination of conidia, subsequent formation of appressoria and reduced leaf scab severity using a detached leaf bioassay. Regardless of treatment, there were no obvious trends in the percentage of conidia with one to four appressoria 5 days after inoculation. The synthetic fungicide penconazole resulted in the greatest levels of germination inhibition, appressorium development and least leaf scab severity. Under field conditions, scab severity on leaves and fruit of apple cv. Golden Delicious treated with a film forming polymer (Bond, Spray Gard, Moisturin) was less than on untreated controls. However, greatest protection in both field trials was provided by the synthetic fungicide penconazole. Higher chlorophyll fluorescence Fv/Fm emissions in polymer and penconazole treated trees indicated less damage to the leaf photosynthetic system as a result of fungal invasion. In addition, higher SPAD values as measures of leaf chlorophyll content were recorded in polymer and penconazole treated trees. Application of a film forming polymer or penconazole resulted in a higher apple yield per tree at harvest in both the 2005 and 2006 field trials compared to untreated controls. Results suggest application of an appropriate film forming polymer may provide a useful addition to existing methods of apple scab management. (C) 2008 Elsevier Ltd. All rights reserved.

QTLs for shelf life in lettuce co-locate with those for leaf biophysical properties but not with those for leaf developmental traits

Developmental and biophysical leaf characteristics that influence post-harvest shelf life in lettuce, an important leafy crop, have been examined. The traits were studied using 60 informative F-9 recombinant inbed lines (RILs) derived from a cross between cultivated lettuce (Lactuca sativa cv. Salinas) and wild lettuce (L. serriola acc. UC96US23). Quantitative trait loci (QTLs) for shelf life co-located most closely with those for leaf biophysical properties such as plasticity, elasticity, and breakstrength, suggesting that these are appropriate targets for molecular breeding for improved shelf life. Significant correlations were found between shelf life and leaf size, leaf weight, leaf chlorophyll content, leaf stomatal index, and epidermal cell number per leaf, indicating that these pre-harvest leaf development traits confer post-harvest properties. By studying the population in two contrasting environments in northern and southern Europe, the genotype by environment interaction effects of the QTLs relevant to leaf development and shelf life were assessed. In total, 107 QTLs, distributed on all nine linkage groups, were detected from the 29 traits. Only five QTLs were common in both environments. Several areas where many QTLs co-located (hotspots) on the genome were identified, with relatively little overlap between developmental hotspots and those relating to shelf life. However, QTLs for leaf biophysical properties (breakstrength, plasticity, and elasticity) and cell area correlated well with shelf life, confirming that the ideal ideotype lettuce should have small cells with strong cell walls. The identification of QTLs for leaf development, strength, and longevity will lead to a better understanding of processability at a genetic and cellular level, and allow the improvement of salad leaf quality through marker-assisted breeding.

Effects of kinetin and nitrogen on growth rates, pigment and protein contents in wild and phycoerythrin-deficient strains of Hypnea musciformis (Rhodophyta)

Hypnea musciformis (Wulfen in Jacqu.) J.V. Lamour. is the main source for carrageenan production in Brazil and strains with selected characteristics could improve the production of raw material. The effects of kinetin on growth rates, morphology, protein content, and concentrations of pigments (chlorophyll a, phycoerythrin, phycocyanin, and allophycocyanin) were assessed in the wild strain (brown phenotype) and in the phycoerythrin-deficient strain (green phenotype) of H. musciformis. Concentrations of kinetin ranging from 0 to 50 mu M were tested in ASP 12-NTA synthetic medium with 10 mu M nitrate (N-limited) and 100 mu M nitrate (N-saturated). In N-limited condition, kinetin stimulated growth rates of the phycoerythrin-deficient strain and formation of lateral branches in both colour strains. Kinetin stimulated protein biosynthesis in both strains. However, differences between both nitrogen conditions were significant only in the phycoerythrin-deficient strain. In the wild strain, effects of kinetin on concentrations of phycobiliproteins were not significant in both nitrogen conditions, except for chlorophyll content. However, the phycoerythrin-deficient strain showed an opposite response, and kinetin stimulated the phycobiliprotein biosynthesis, with the highest concentrations of phycoerythrin in N-saturated medium, while the highest concentrations of allophycocyanin and phycocyanin were observed in N-limited medium. These results indicate that the effects of kinetin on growth, morphology, protein and phycobiliprotein contents are influenced by nitrogen availability, and the main nitrogen storage pools in phycoerythrin-deficient strain of H. musciformis submitted to N-limited conditions were phycocyanin and allophycocianin, the biosynthesis of which was enhanced by kinetin.

Integração de características de planta, de dossel e de solo para maior eficiência da adubação nitrogenada em cobertura em milho

O milho é um das culturas mais exigentes em nitrogênio (N). A sua aplicação na dose e época correta pode aumentar a sua eficiência de uso, diminuindo custos e danos ambientais. Foram estudadas características de planta, de dossel e de solo, como indicadores da disponibilidade de N no sistema solo-planta para predição da necessidade deste nutriente em cobertura em milho. Foram conduzidos cinco experimentos a campo e dois em casa de vegetação, nas estações de crescimento de 2002/03 e 2003/04, na Estação Experimental Agronômica e na Faculdade de Agronomia da UFRGS, em Eldorado do Sul e em Porto Alegre-RS, Brasil, respectivamente, e dois experimentos a campo no ano de 2004 no Estern Cereal and Oilseed Research Center, em Ottawa-Ontário, Canadá. Foram avaliadas, em diferentes locais e situações de manejo, características de planta, de dossel e de solo, citando-se: teores de nitrato, amônio e N mineral no solo e na folha; massa seca e área foliar da folha e da planta, teor e acúmulo de N na folha e na planta; teor relativo de clorofila na folha, medido pelo clorofilômetro, reflectância do dossel, medido por dois tipos de radiômetros e fluorescência da folha, medida pelo fluorômetro. Além disso, foram avaliados o rendimento de grãos e seus componentes e parâmetros de eficiência técnica e econômica de uso de N. Dentre as características de planta, o teor relativo de clorofila na folha, e dentre os de solo, o teor de nitrato no solo, destacaram-se entre os demais avaliados. Foram determinados níveis críticos e doses ótimas de N, bem como estabelecidas curvas de calibração para dois níveis de manejo com base nestas características para monitoramento da lavoura. No que diz respeito às características de dossel estudadas, a reflectância apresentou melhores resultados que a fluorescência como indicador do nível de N no sistema solo-planta. Os estudos realizados mostraram que dentre as caracteríticas avaliadas, atualmente, o teor relativo de clorofila na folha tem o maior potencial para auxiliar na determinação da época mais adequada para aplicação de N em cobertura em milho.

Respostas fisiológicas em mudas de banananeira tratadas com estrobilurinas

There are reports that strobilurin besides having a fungicide effect can promote physiologic benefits to the plants. However, this effect on banana plants was not studied yet. The objective of the present study was to evaluate the effect of strobirulins on the physiology of banana plantlets. For this purpose, cultivar Grand Naine banana plantlets were transferred to pots containing substrate and kept in a nursery with 50% shading. The experimental design was a completely randomized design with three treatments (water, azoxystrobin and pyraclostrobin) and five replications. The treatments were applied at 15, 30, 45, 60 and 75 days after transplanting at a dose 100 g a. i. ha(-1) with manual spray. Plant height, pseudostem diameter, shoot dry matter in strobilurin treated plants were higher than the untreated plants, however, the effect of fungicide treatment was different, being the most pronounced effect of pyraclostrobin compared to azoxystrobin. Plants treated with pyraclostrobin had higher leaf area, nitrate reductase activity and chlorophyll content of leaf total nitrogen than the plants treated with azoxystrobin and water, which did not differ. Strobilurins affect the physiology of the banana plantlets differently, the effect being more pronounced by pyraclostrobin.

Efeito da densidade de tubérculos de tiririca (Cyperus rotundus) sobre o crescimento inicial de plantas de algodão

O objetivo deste trabalho foi avaliar a interferência de densidades de tubérculos de tiririca no crescimento inicial de plantas de algodão, cultivar Delta Opal. Para isso, utilizaram-se caixas de cimento-amianto (0,60 x 0,60 x 0,25 m) com Latossolo Vermelho Escuro, no centro das quais foram semeadas seis sementes de algodão, em linha, espaçadas de 0,10 m; em seguida, plantaram-se tubérculos de tiririca nas densidades de 0, 5, 10, 15, 25, 50, 75, 100, 125, 150, 175 e 200 tubérculos por caixa, que foram nestas distribuídos aleatoriamente. O delineamento experimental foi o de blocos casualizados, em quatro repetições. Aos 50 dias após a semeadura, foram determinados, nas plantas de algodão, a altura e o teor relativo de clorofila total. Ao término do período experimental (65 dias após a emergência do algodão), foram determinados: altura, teor relativo de clorofila total, área foliar e matéria seca do caule e das folhas. Nas plantas de tiririca foi feita a contagem do número final de plantas (partes aéreas) por caixa. A interferência da tiririca no crescimento inicial do algodoeiro iniciou-se a partir de 5 tubérculos/caixa, reduzindo em até 71% as características analisadas na mais alta densidade (200 tubérculos/caixa). A competição intra-específica na tiririca acentuou-se a partir de 75 tubérculos/caixa, quando obteve mais do que 1,86 brotação por tubérculo. As características avaliadas nas plantas de algodão mais sensíveis ao efeito dos tubérculos de tiririca foram: área foliar, massa seca de folhas, caule e altura das plantas, nesta ordem.

EFEITOS da SIMULAÇÃO DE DERIVA DE CLOMAZONE em PLANTAS DE LARANJEIRA 'HAMLIN'

Em trabalho realizado em 1998, no município de Taiúva-SP, objetivou-se avaliar o efeito da simulação da deriva de doses crescentes, até atingir a recomendada comercialmente, de clomazone, em duas formulações, e de clomazone em mistura com ametryne, em laranjeira-'Hamlin' com frutos com 2 a 4 cm de diâmetro. O delineamento experimental utilizado foi o de blocos casualizados, com 15 tratamentos, em 3 repetições. As avaliações basearam-se em possíveis alterações morfofisiológicas das plantas, com determinações do teor de clorofila total nas folhas, porcentagem de abortamento de frutos, além de análise tecnológica dos frutos. Concluiu-se que a dose comercial de clomazone isolado e em mistura com ametryne a 50 e 100% da dose resultou na formação de manchas cloróticas e/ou necróticas na casca do fruto e causou mortalidade de ramos que se encontravam em crescimento vegetativo, não acarretando qualquer alteração qualitativa do suco.

Interferência de caruru-de-mancha, maria-pretinha, picão-preto e tiririca em tomateiro industrial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos de herbicidas nos teores de clorofilas de Spirodela punctata

Com o objetivo de verificar na planta aquática Spirodela punctata o efeito de diferentes concentrações (0,005; 0,05; 0,5 e 5 mgL-1 de ingrediente ativo) dos herbicidas butachlor, glyphosate e propanil sobre os teores de clorofila a, b e na razão clorofila a/b, foram conduzidos, por sete dias completos, bioensaios em sala climatizada. Determinou-se os teores de clorofilas através de leituras espectrofotométricas nas absorbâncias A645 e A663 nm. Os resultados mostraram que o butachlor diminuiu o teor de clorofila b, o glyphosate o teor de clorofila a, enquanto o propanil diminuiu os teores de clorofila a, b e a razão a/b, provocando a maior redução de pigmentos na espécie.

Weed control strip influences the initial growth of Eucalyptus grandis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)