Sources of Software Requirements Change from the Perspectives of Development and Maintenance

Changes to software requirements occur during initial development and subsequent to delivery, posing a risk to cost and quality while at the same time providing an opportunity to add value. Provision of a generic change source taxonomy will support requirements change risk visibility, and also facilitate richer recording of both pre- and post-delivery change data. In this paper we present a collaborative study to investigate and classify sources of requirements change, drawing comparison between those pertaining to software development and maintenance. We begin by combining evolution, maintenance and software lifecycle research to derive a definition of software maintenance, which provides the foundation for empirical context and comparison. Previously published change ‘causes’ pertaining to development are elicited from the literature, consolidated using expert knowledge and classified using card sorting. A second study incorporating causes of requirements change during software maintenance results in a taxonomy which accounts for the entire evolutionary progress of applications software. We conclude that the distinction between the terms maintenance and development is imprecise, and that changes to requirements in both scenarios arise due to a combination of factors contributing to requirements uncertainty and events that trigger change. The change trigger taxonomy constructs were initially validated using a small set of requirements change data, and deemed sufficient and practical as a means to collect common requirements change statistics across multiple projects.

Lean Software Management: BBC Worldwide Case Study

This case study examines how the lean ideas behind the Toyota production system can be applied to software project management. It is a detailed investigation of the performance of a nine-person software development team employed by BBC Worldwide based in London. The data collected in 2009 involved direct observations of the development team, the kanban boards, the daily stand-up meetings, semistructured interviews with a wide variety of staff, and statistical analysis. The evidence shows that over the 12-month period, lead time to deliver software improved by 37%, consistency of delivery rose by 47%, and defects reported by customers fell 24%. The significance of this work is showing that the use of lean methods including visual management, team-based problem solving, smaller batch sizes, and statistical process control can improve software development. It also summarizes key differences between agile and lean approaches to software development. The conclusion is that the performance of the software development team was improved by adopting a lean approach. The faster delivery with a focus on creating the highest value to the customer also reduced both technical and market risks. The drawbacks are that it may not fit well with existing corporate standards.

Lightweight Risk Management in Agile projects

Risk management in software engineering has become a recognized project management practice but it seems that not all companies are systematically applying it. At the same time, agile methods have become popular, partly because proponents claim that agile methods implicitly reduce risks due
to, for example, more frequent and earlier feedback, shorter periods of development time and easier prediction of cost. Therefore, there is a need to investigate how risk management can be usable in iterative and evolutionary software development processes. This paper investigates the gathering of empirical data on risk management from the project environment and presents
a novel approach to manage risk in agile projects. Our approach is based on a prototype tool, Agile Risk Tool (ART). This tool reduces human effort in risk management by using software agents to identify, assess and monitor risk, based on input and data collected from the project environment and by applying
some designated rules. As validation, groups of student project data were used to provide evidence of the efficacy of this approach. We demonstrate the approach and the feasibility of using a lightweight risk management tool to alert, assess and monitor risk with reduced human effort.

Metodologia híbrida de desenvolvimento centrado no utilizador: aplicada ao software educativo

No panorama atual do desenvolvimento de software educativo é importante que os processos de desenvolvimento sejam adequados e compatíveis com o contexto em que serão utilizados este tipo de recursos. Desta forma, é importante melhorar continuamente os processos de desenvolvimento bem como se proceder à avaliação de forma a garantir a sua qualidade e viabilidade económica. Este estudo propõe uma Metodologia Híbrida de Desenvolvimento Centrado no Utilizador (MHDCU) aplicada ao software educativo. Trata-se de um processo de desenvolvimento simples, iterativo e incremental que tem como “alicerces” princípios do Design Centrado no Utilizador, especificados na International Organization for Standardization - ISO 13407. Na sua base encontra-se a estrutura disciplinada de processos de desenvolvimento, bem como práticas e valores dos métodos ágeis de desenvolvimento de software. O processo é constituído por 4 fases principais: planeamento (guião didático), design (storyboard), implementação e manutenção/operação. A prototipagem e a avaliação são realizadas de modo transversal a todo o processo. A metodologia foi implementada numa Pequena e Média Empresa de desenvolvimento de recursos educacionais, com o objetivo de desenvolver recursos educacionais com qualidade reconhecida e simultaneamente viáveis do ponto de vista económico. O primeiro recurso que teve por base a utilização desta metodologia foi o Courseware Sere – “O Ser Humano e os Recursos Naturais”. O trabalho seguiu uma metodologia de investigação & desenvolvimento, de natureza mista, em que se pretendeu descrever e analisar/avaliar uma metodologia de desenvolvimento de software educativo, i.e., o processo, bem como o produto final. O estudo é fundamentalmente descritivo e exploratório. A metodologia de desenvolvimento do software (primeira questão de investigação) foi proposta, essencialmente, com base na revisão integrativa da literatura da especialidade e com base nos resultados que emergiram das Fases 2 e 3. Do ponto de vista exploratório, foi avaliado, por um lado, o potencial técnico e didático da 1ª versão do software inserido no Courseware Sere (segunda questão de investigação), e, por outro lado, analisar os pontos fortes e as fragilidades da metodologia utilizada para o seu desenvolvimento (terceira questão de investigação). Como técnicas de recolha de dados recorreu-se a dois inquéritos por questionário e à observação direta participante (mediada pela plataforma moodle). Quanto às técnicas de análise de dados optou-se pela análise estatística descritiva e pela análise de conteúdo. Os resultados indicam que o recurso desenvolvido possui qualidade técnica e didática. Relativamente a análise da Metodologia Híbrida de desenvolvimento Centrado no Utilizador foram propostas algumas melhorias relacionadas com o envolvimento do utilizador e introdução de novos métodos. Apesar de identificadas algumas limitações, este projeto permitiu que a empresa melhorasse significativamente os processos de desenvolvimento de recursos (mesmo os que não são informatizados), bem como permitiu o aumento do seu portefólio com o desenvolvimento do Courseware Sere.

Modelo institucional do processo de estruturação de empresas de desenvolvimento de software: um estudo de múltiplos casos

Some authors have shown the need of understanding the technological structuring process in contemporary firms. From this perspective, the software industry is a very important element because it provides products and services directly to many organizations from many fields. In this case, the Brazilian software industry has some peculiarities that distinguish it from other industries located in developed countries, which makes its understanding even more relevant. There is evidence that local firms take different strategies and structural configurations to enter into a market naturally dominated by large multinational firms. Therefore, this study aims to understand not only the structural configurations assumed by domestic firms but also the dynamic and the process that lead to these different configurations. To do so, this PhD dissertation investigates the institutional environment, its entities and the isomorphic movements, by employing an exploratory, descriptive and explanatory multiple cases study. Eight software development companies from the Recife's information technology Cluster were visited. Also, a form was applied and an interview with one of the main firm s professional was conducted. Although the study is predominantly qualitative, part of the data was analyzed through charts and graphs, providing a companies and environment overview that was very useful to analysis done through the interviews interpretation. As a result, it was realized that companies are structured around hybrids business models from two ideal types of software development companies, which are: software factory and technology-based company. Regarding the development process, it was found that there is a balanced distribution between the traditional and agile development paradigm. Among the traditional methodologies, the Rational Unified Process (RUP) is predominant. The Scrum is the most used methodology among the organizations based on the Agile Manifesto's principles. Regarding the structuring process, each institutional entity acts in such way that generates different isomorphic pressure. Emphasis was given to entities such as customers, research agencies, clusters, market-leading businesses, public universities, incubators, software industry organizations, technology vendors, development tool suppliers and manager s school and background because they relate themselves in a close way with the software firms. About this relationship, a dual and bilateral influence was found. Finally, the structuring level of the organizational field has been also identified as low, which gives a chance to organizational actors of acting independently

Interfaz gráfica y fase de pruebas de software de vídeo forense (Sistema de codificación DV)

El presente proyecto fin de carrera, realizado por el ingeniero técnico en telecomunicaciones Pedro M. Matamala Lucas, es la fase final de desarrollo de un proyecto de mayor magnitud correspondiente al software de vídeo forense SAVID. El propósito del proyecto en su totalidad es la creación de una herramienta informática capacitada para realizar el análisis de ficheros de vídeo, codificados y comprimidos por el sistema DV –Digital Video-. El objetivo del análisis, es aportar información acerca de si la cinta magnética presenta indicios de haber sido manipulada con una edición posterior a su grabación original, además, de mostrar al usuario otros datos de interés como las especificaciones técnicas de la señal de vídeo y audio. Por lo tanto, se facilitará al usuario, analista de vídeo forense, información que le ayude a valorar la originalidad del contenido del soporte que es sujeto del análisis. El objetivo específico de esta fase final, es la creación de la interfaz de usuario del software, que informa tanto del código binario de los sectores significativos, como de su interpretación tras el análisis. También permitirá al usuario el reporte de los resultados, además de otras funcionalidades que le permitan la navegación por los sectores del código que han sido modificados como efecto colateral de la edición de la cinta magnética original. Otro objetivo importante del proyecto ha sido la investigación de metodologías y técnicas de desarrollo de software para su posterior implementación, buscando con esto, una mayor eficiencia en la gestión del tiempo y una mayor calidad de software con el fin de garantizar su evolución y sostenibilidad en el futuro. Se ha hecho hincapié en las metodologías ágiles que han ido ganando relevancia en el sector de las tecnologías de la información en las últimas décadas, sustituyendo a metodologías clásicas como el desarrollo en cascada. Su flexibilidad durante el ciclo de vida del software, permite obtener mejores resultados cuando las especificaciones no están del todo definidas, ajustándose de este modo a las condiciones del proyecto. Resumiendo las especificaciones técnicas del software, C++ es el lenguaje de programación orientado a objetos con el que se ha desarrollado, utilizándose la tecnología MFC -Microsoft Foundation Classes- para la implementación. Es un proyecto MFC de tipo cuadro de dialogo,creado, compilado y publicado, con la herramienta de desarrollo integrado Microsoft Visual Studio 2010. La arquitectura con la que se ha estructurado es la arquetípica de tres capas, compuesta por la interfaz de usuario, capa de negocio y capa de acceso a datos. Se ha visto necesario configurar el proyecto con compatibilidad con CLR –Common Languages Runtime- para poder implementar la funcionalidad de creación de reportes. Acompañando a la aplicación informática, se presenta la memoria del proyecto y sus anexos correspondientes a los documentos EDRF –Especificaciones Detalladas de Requisitos funcionales-, EIU –Especificaciones de Interfaz de Usuario , DT -Diseño Técnico- y Guía de Usuario. SUMMARY. This dissertation, carried out by the telecommunications engineer Pedro M. Matamala Lucas, is in its final stage and is part of a larger project for the software of forensic video called SAVID. The purpose of the entire project is the creation of a software tool capable of analyzing video files that are coded and compressed by the DV -Digital Video- System. The objective of the analysis is to provide information on whether the magnetic tape shows signs of having been tampered with after the editing of the original recording, and also to show the user other relevant data and technical specifications of the video signal and audio. Therefore the user, forensic video analyst, will have information to help assess the originality of the content of the media that is subject to analysis. The specific objective of this final phase is the creation of the user interface of the software that provides information about the binary code of the significant sectors and also its interpretation after analysis. It will also allow the user to report the results, and other features that will allow browsing through the sections of the code that have been modified as a secondary effect of the original magnetic tape being tampered. Another important objective of the project is the investigation of methodologies and software development techniques to be used in deployment, with the aim of greater efficiency in time management and enhanced software quality in order to ensure its development and maintenance in the future. Agile methodologies, which have become important in the field of information technology in recent decades, have been used during the execution of the project, replacing classical methodologies such as Waterfall Development. The flexibility, as the result of using by agile methodologies, during the software life cycle, produces better results when the specifications are not fully defined, thus conforming to the initial conditions of the project. Summarizing the software technical specifications, C + + the programming language – which is object oriented and has been developed using technology MFC- Microsoft Foundation Classes for implementation. It is a project type dialog box, created, compiled and released with the integrated development tool Microsoft Visual Studio 2010. The architecture is structured in three layers: the user interface, business layer and data access layer. It has been necessary to configure the project with the support CLR -Common Languages Runtime – in order to implement the reporting functionality. The software application is submitted with the project report and its annexes to the following documents: Functional Requirements Specifications - Detailed User Interface Specifications, Technical Design and User Guide.

Evaluación, instalación y configuración de herramientas de gestión de proyectos de desarrollo de software

Actualmente existen multitud de aplicaciones creadas para la gestión de proyectos software; cada una de ellas pretende dar solución y facilitar las tareas propias de los gestores y los desarrolladores pertenecientes a los equipos de desarrollo. Los equipos de desarrollo software suelen estar integrados por gran variedad de recursos, tanto humanos como materiales. Cada uno desempeña una función concreta en el proyecto, pudiendo no tener una dedicación plena al proyecto. Por eso, es necesario que dichos recursos sean compartidos entre la cartera proyectos existentes. Para resolver este planteamiento en las aplicaciones de gestión de proyectos, ha sido requisito fundamental que se puedan gestionar varios proyectos de forma simultánea (gestión multiproyecto), pudiendo repartir la dedicación de los recursos entre los proyectos existentes en la cartera. En la actualidad, existe un gran número de metodologías de gestión de proyectos, por lo que, en parte, el éxito del proyecto radica en la elección de la más adecuada. Entre todas las metodologías existentes, este estudio se ha centrado en las cada vez más utilizadas metodologías de gestión de proyectos ágiles; se describe en qué consisten, qué beneficios aportan frente a las metodologías clásicas y cuáles son las más utilizadas por sus ya contrastados beneficios y el valor que aportan a la gestión de proyectos. Por lo descrito anteriormente, otro requisito fundamental a la hora de valorar las aplicaciones de gestión de proyectos ha sido la capacidad de soportar y aplicar metodologías ágiles de gestión de proyectos. En este estudio también se ha tenido en cuenta el tipo de aplicación atendiendo a su instalación y acceso, y se ha realizado la diferenciación entre aplicaciones web- las cuales precisan ser instaladas en un servidor web y son accesibles desde cualquier dispositivo con navegador -, y aplicaciones de escritorio - las cuales precisan estar instaladas en un equipo de forma local y sólo pueden ser accedidas a ellas desde dicho equipo. En este estudio se han evaluado varias aplicaciones, intentando analizar el cumplimiento de las características comentadas anteriormente, dando como resultado tres aplicaciones seleccionadas siendo éstas las que pueden aportar más valor a la hora de gestionar una cartera de proyectos. ABSTRACT. At present, there are many applications aimed at managing software projects. Every application intends to solve and facilitate tasks to managers and developers belonging to the development teams. Software development teams are usually made up of many different human and material resources, each of them developing a specific task in the project and sometimes without a full dedication to the project. Therefore, these resources have to be shared within the existing project portfolio. To meet this need in project management applications, the main requirement is to be able to manage several projects simultaneously (multi-project management), thus allowing resources to be shared within the existing project portfolio. At present, there are a large number of project management methodologies and the success of the project lies in choosing the most appropriate one. Among all the existing methodologies, this study has focused on the increasingly used agile project management methodologies. The study describes the way they work, their added value in comparison traditional methodologies, and which ones are more often used due to their already verified benefits and value in managing projects. Taking into account the above-mention characteristics, another key requirement when assessing the project management applications has been their capacity to support and implement project management agile methodologies. This study has also taken into account the type of application according to its installation and access. A difference is established between web applications – which require to be installed in a web server and are accessible from any device with a web browser – and desktop applications, which must be installed in the equipment to be used and are only accessible from this equipment. The study has assessed several applications by analyzing the compliance with the above-mentioned characteristics and has chosen three applications that provide the management of the project portfolio with an added value.

Agile Product Inception: Framework Analysis and Support

In this dissertation, after testing that neither the definition of Agile methodologies, nor the current tools that support them, such as Scrum or XP, gave guidance for stages of software development prior to the definition of the first interaction of development; we proceeded to study the state of the art of Inception techniques, that is, techniques to deal with this early phase of the project, that would help guide its development. From the analysis of these Inception techniques, we defined what we considered as the essential properties of an Inception framework. With that list at hand, it was found that no current Inception framework supported all the features, also, we found that it did not exist, either, any software application on the market that did it. Finally, after checking the above gaps, we defined the Inception framework "Agile Incepti-ON", with all the practices necessary to meet the requirements specified above. In addition to this, a software application was developed to support the practices defined in the Inception framework, called "Agile Dojo".

Application of user-centered design in the development of an atomated/assisted testing system for self-service devices

Automated Teller Machines (ATMs) are sensitive self-service systems that require important investments in security and testing. ATM certifications are testing processes for machines that integrate software components from different vendors and are performed before their deployment for public use. This project was originated from the need of optimization of the certification process in an ATM manufacturing company. The process identifies compatibility problems between software components through testing. It is composed by a huge number of manual user tasks that makes the process very expensive and error-prone. Moreover, it is not possible to fully automate the process as it requires human intervention for manipulating ATM peripherals. This project presented important challenges for the development team. First, this is a critical process, as all the ATM operations rely on the software under test. Second, the context of use of ATMs applications is vastly different from ordinary software. Third, ATMs’ useful lifetime is beyond 15 years and both new and old models need to be supported. Fourth, the know-how for efficient testing depends on each specialist and it is not explicitly documented. Fifth, the huge number of tests and their importance implies the need for user efficiency and accuracy. All these factors led us conclude that besides the technical challenges, the usability of the intended software solution was critical for the project success. This business context is the motivation of this Master Thesis project. Our proposal focused in the development process applied. By combining user-centered design (UCD) with agile development we ensured both the high priority of usability and the early mitigation of software development risks caused by all the technology constraints. We performed 23 development iterations and finally we were able to provide a working solution on time according to users’ expectations. The evaluation of the project was carried out through usability tests, where 4 real users participated in different tests in the real context of use. The results were positive, according to different metrics: error rate, efficiency, effectiveness, and user satisfaction. We discuss the problems found, the benefits and the lessons learned in the process. Finally, we measured the expected project benefits by comparing the effort required by the current and the new process (once the new software tool is adopted). The savings corresponded to 40% less effort (man-hours) per certification. Future work includes additional evaluation of product usability in a real scenario (with customers) and the measuring of benefits in terms of quality improvement.

Configuración de un entorno de trabajo para el desarrollo de software ágil con integración continua

Hoy en día, existen numerosos sistemas (financieros, fabricación industrial, infraestructura de servicios básicos, etc.) que son dependientes del software. Según la definición de Ingeniería del Software realizada por I. Sommerville, “la Ingeniería del Software es una disciplina de la ingeniería que comprende todos los aspectos de la producción de software desde las etapas iniciales de la especificación del sistema, hasta el mantenimiento de éste después de que se utiliza.” “La ingeniería del software no sólo comprende los procesos técnicos del desarrollo de software, sino también actividades tales como la gestión de proyectos de software y el desarrollo de herramientas, métodos y teorías de apoyo a la producción de software.” Los modelos de proceso de desarrollo software determinan una serie de pautas para poder desarrollar con éxito un proyecto de desarrollo software. Desde que surgieran estos modelos de proceso, se investigado en nuevas maneras de poder gestionar un proyecto y producir software de calidad. En primer lugar surgieron las metodologías pesadas o tradicionales, pero con el avance del tiempo y la tecnología, surgieron unas nuevas llamadas metodologías ágiles. En el marco de las metodologías ágiles cabe destacar una determinada práctica, la integración continua. Esta práctica surgió de la mano de Martin Fowler, con el objetivo de facilitar el trabajo en grupo y automatizar las tareas de integración. La integración continua se basa en la construcción automática de proyectos con una frecuencia alta, promoviendo la detección de errores en un momento temprano para poder dar prioridad a corregir dichos errores. Sin embargo, una de las claves del éxito en el desarrollo de cualquier proyecto software consiste en utilizar un entorno de trabajo que facilite, sistematice y ayude a aplicar un proceso de desarrollo de una forma eficiente. Este Proyecto Fin de Grado (PFG) tiene por objetivo el análisis de distintas herramientas para configurar un entorno de trabajo que permita desarrollar proyectos aplicando metodologías ágiles e integración continua de una forma fácil y eficiente. Una vez analizadas dichas herramientas, se ha propuesto y configurado un entorno de trabajo para su puesta en marcha y uso. Una característica a destacar de este PFG es que las herramientas analizadas comparten una cualidad común y de alto valor, son herramientas open-source. El entorno de trabajo propuesto en este PFG presenta una arquitectura cliente-servidor, dado que la mayoría de proyectos software se desarrollan en equipo, de tal forma que el servidor proporciona a los distintos clientes/desarrolladores acceso al conjunto de herramientas que constituyen el entorno de trabajo. La parte servidora del entorno propuesto proporciona soporte a la integración continua mediante herramientas de control de versiones, de gestión de historias de usuario, de análisis de métricas de software, y de automatización de la construcción de software. La configuración del cliente únicamente requiere de un entorno de desarrollo integrado (IDE) que soporte el lenguaje de programación Java y conexión con el servidor. ABSTRACT Nowadays, numerous systems (financial, industrial production, basic services infrastructure, etc.) depend on software. According to the Software Engineering definition made by I.Sommerville, “Software engineering is an engineering discipline that is concerned with all aspects of software production from the early stages of system specification through to maintaining the system after it has gone into use.” “Software engineering is not just concerned with the technical processes of software development. It also includes activities such as software project management and the development of tools, methods, and theories to support software production.” Software development process models determine a set of guidelines to successfully develop a software development project. Since these process models emerged, new ways of managing a project and producing software with quality have been investigated. First, the so-called heavy or traditional methodologies appeared, but with the time and the technological improvements, new methodologies emerged: the so-called agile methodologies. Agile methodologies promote, among other practices, continuous integration. This practice was coined by Martin Fowler and aims to make teamwork easier as well as automate integration tasks. Nevertheless, one of the keys to success in software projects is to use a framework that facilitates, systematize, and help to deploy a development process in an efficient way. This Final Degree Project (FDP) aims to analyze different tools to configure a framework that enables to develop projects by applying agile methodologies and continuous integration in an easy and efficient way. Once tools are analyzed, a framework has been proposed and configured. One of the main features of this FDP is that the tools under analysis share a common and high-valued characteristic: they are open-source. The proposed framework presents a client-server architecture, as most of the projects are developed by a team. In this way, the server provides access the clients/developers to the tools that comprise the framework. The server provides continuous integration through a set of tools for control management, user stories management, software quality management, and software construction automatization. The client configuration only requires a Java integrated development environment and network connection to the server.

Implantación de técnicas de QA en un proyecto de desarrollo software

Hoy en día existe una preocupación creciente por la calidad del software entregado en los proyectos que se realizan a lo largo del mundo. El trabajo de fin de grado que va a ser desarrollado en estas páginas pretende demostrar la importancia de la realización de tests funcionales durante el proceso de desarrollo de software para que el proyecto alcance la calidad requerida tan demandada en estos días. Para ello, después de una pequeña introducción a la historia del software, se presentarán y compararán diversos tipos de metodologías de desarrollo de software, tanto pesadas (cascada, espiral, etc.) como ágiles (Extreme Programming y Scrum), se enfatizará en dichas metodologías ágiles y cómo el proceso de testing y control de calidad encaja perfectamente con la filosofía de las citadas metodologías ágiles. Se desarrollará una explicación del papel de QA en el desarrollo de software, asi como una explicación de los tipos de test existentes, y las herramientas, tecnologías y patrones que existen a disposición de aquellos que quieran desempeñar el papel de QA. Para complementar el punto de vista teórico de este trabajo se presentará un caso práctico real realizado en la empresa bq bajo una metodología Scrum. Dicho caso práctico muestra el uso de ciertas herramientas y su aporte para el control de calidad del proyecto bajo desarrollo, demostrando su importancia. Se realizará énfasis en el proceso de automatización de ciertas baterías de test (llamadas test suites), mostrando desde el planteamiento inicial de las diferentes historias de usuario y la batería de test, pasando por la elección de las tecnologías más adecuadas para la elaboración de los test hasta llegar al lanzamiento de dicha batería de pruebas y la comprobación de éstas. El punto de vista práctico quedará complementado por una explicación del framework nightwatch.js, framework utilizado en el desarrollo del proyecto en bq para la automatización de test funcionales. Esta explicación comprenderá tanto la configuración y uso del framework como el uso de patrones y la estructura de las pruebas. ABSTRACT Nowadays there is a growing concern about the Quality of the software delivered in the projects that are made all around the world. This final project will try to prove the importance of performing functional tests during the Software Development Process in order to be able to reach the demanded Quality. To fulfill this objective, different types of Software Development methodologies will be presented and compared. Heavy methodologies (waterfall, spiral methodologies, etc.) as well as agile methodologies (Extreme Programming and Scrum). There will be an emphasis in the second kind (agile methodologies) and how the testing and quality assurance process fits perfectly in their philosophy. A deep explanation of the role that Quality Assurance holds on software development will be presented, as well as an explanation on the current types of testing and an explanation of the different tools; technologies and patrons that exist to help anyone who wants to perform the role of QA. To complement the theoretical perspective of this work a real case study, performed at the company bq under a Scrum methodology, will be presented. The mentioned study covers the use of certain tools and their input for the quality assurance of the project under development, proving its relevance. Emphasis will be made in the process of conducting a set of tests (called test suite), showing from the initial approach of the different users stories and the set of tests, going through the choosing of the most suitable technologies for the tests development, and ending with the performance of this battery of tests and their checkout. The practical point of view will be complemented by a deep explanation of the creation process using the nightwatch.js automated test framework, used in the project in bq. This explanation will cover both the configuration and use of the framework as the use of patterns and structure of the tests.

An Exploration of parametric software cost estimating models for Jackson Systems Development

Most parametric software cost estimation models used today evolved in the late 70's and early 80's. At that time, the dominant software development techniques being used were the early 'structured methods'. Since then, several new systems development paradigms and methods have emerged, one being Jackson Systems Development (JSD). As current cost estimating methods do not take account of these developments, their non-universality means they cannot provide adequate estimates of effort and hence cost. In order to address these shortcomings two new estimation methods have been developed for JSD projects. One of these methods JSD-FPA, is a top-down estimating method, based on the existing MKII function point method. The other method, JSD-COCOMO, is a sizing technique which sizes a project, in terms of lines of code, from the process structure diagrams and thus provides an input to the traditional COCOMO method.The JSD-FPA method allows JSD projects in both the real-time and scientific application areas to be costed, as well as the commercial information systems applications to which FPA is usually applied. The method is based upon a three-dimensional view of a system specification as opposed to the largely data-oriented view traditionally used by FPA. The method uses counts of various attributes of a JSD specification to develop a metric which provides an indication of the size of the system to be developed. This size metric is then transformed into an estimate of effort by calculating past project productivity and utilising this figure to predict the effort and hence cost of a future project. The effort estimates produced were validated by comparing them against the effort figures for six actual projects.The JSD-COCOMO method uses counts of the levels in a process structure chart as the input to an empirically derived model which transforms them into an estimate of delivered source code instructions.

A Practical Case of Software Localization after System Development

Internationalization of software as a previous step for localization is usually taken into account during early phases of the life-cycle of software development. However, the need to adapt software applications into different languages and cultural settings can appear once the application is finished and even in the market. In these cases, software localization implies a high cost of time and resources. This paper shows a real case of a existent software application, designed and developed without taking into account future necessities of localization, whose architecture and source code were modified to include the possibility of straightforward adaptation into new languages. The use of standard languages and advanced programming languages has permitted the authors to adapt the software in a simple and straightforward mode.

Agile Case Study Evaluation In Middle Size Project

In the last few years Agile methodologies appeared as a reaction to traditional ways of developing software and acknowledge the need for an alternative to documentation driven, heavyweight software development processes. This paper shortly presents a combination between Rational Uni ed Process and an agile approach for software development of e-business applications. The resulting approach is described stressing on the strong aspects of both combined methodologies. The article provides a case study of the proposed methodology which was developed and executed in a successful e-project in the area of the embedded systems.