Biofiltração de compostos orgânicos voláteis e gás sulfídrico em estações de despejos industriais de processamento de hidrocarbonetos.

Neste trabalho foi estudado o tratamento simultâneo por biofiltração de emissões de compostos orgânicos voláteis, COV e gás sulfídrico, H2S, em estações de tratamento de despejos industriais, de refinaria de petróleo, ETDI. A biofiltração dos gases emanados da EDTI mostrou ser uma técnica de alta eficiência, atingindo valores de 95 a 99 % para tratamento simultâneo de COV e H2S em concentrações de 1000 e 100 ppmv, respectivamente. Foram realizados testes em 95 dias consecutivos de operação, em uma planta piloto instalada na Superintendência da Industrialização do Xisto, SIX, em São Mateus do Sul, Paraná, de março a agosto de 2006. O biofiltro foi do tipo fluxo ascendente, com 3,77 m3 de leito orgânico, composto de turfa, carvão ativado, lascas de madeira, serragem brita fina além de outros componentes menores. Foi realizada inoculação biológica com lodo filtrado de estação de tratamento de esgoto sanitário. As vazões de gás aplicadas variaram de 85 a 407 m3/h, resultando em taxas de carga de massa de 11,86 a 193,03 g de COV/h.m3 de leito e tempos de residência de 24 segundos a 6,5 minutos, com tempo ótimo de 1,6 minutos. A capacidade máxima de remoção do sistema encontrada, nas condições testadas, foi de 15 g de COV/h. m3, compatível com os valores encontrados na literatura para depuração biológica de COV na escala praticada. Também foi verificada a redução de componentes específicos de BTX, demonstrando boa degradabilidade dos compostos orgânicos. Finalmente o biofiltro demonstrou boa robustez biológica diante dos desvios operacionais intencionalmente provocados, tais como falta de umidade do leito, baixa temperatura, alta vazão, falta de carga de COV e baixo pH do leito. Depois de retomada a condição de operação estável, a biofiltração rapidamente atingiu o estado de equilíbrio, assegurando o uso eficiente e confiável da técnica no tratamento de gases de EDTI na indústria do hidrocarbonetos ou em refinarias de petróleo.

Design considerations for a micro aerial vehicle aerodynamic characterization facility at the University of Florida research and engineering education facility

This paper describes the design considerations for a proposed aerodynamic characterization facility (ACF) for micro aerial vehicles (MAVs). This is a collaborative effort between the Air Force Research Laboratory Munitions Directorate (AFRL/MN) and the University of Florida Research and Engineering Education Facility (UF/REEF). The ACF is expected to provide a capability for the characterization of the aerodynamic performance of future MAVs. This includes the ability to gather the data necessary to devise control strategies as well as the potential to investigate aerodynamic 'problem areas' or specific failings. Since it is likely that future MAVs will incorporate advanced control strategies, the facility must enable researchers to critically assess such novel methods. Furthermore, the aerodynamic issues should not be seen (and tested) in isolation, but rather the facility should be able to also provide information on structural responses (such as aeroelasticity) as well as integration issues (say, thrust integration or sensor integration). Therefore the mission for the proposed facility ranges form fairly basic investigations of individual technical issues encountered by MAVs (for example an evaluation of wing shapes or control effectiveness) all the way to testing a fully integrated vehicle in a flight configuration for performance evaluation throughout the mission envelope.

Training and assignment of multi-skilled workers for implementing seru production systems

Confronted with high variety and low volume market demands, many companies, especially the Japanese electronics manufacturing companies, have reconfigured their conveyor assembly lines and adopted seru production systems. Seru production system is a new type of work-cell-based manufacturing system. A lot of successful practices and experience show that seru production system can gain considerable flexibility of job shop and high efficiency of conveyor assembly line. In implementing seru production, the multi-skilled worker is the most important precondition, and some issues about multi-skilled workers are central and foremost. In this paper, we investigate the training and assignment problem of workers when a conveyor assembly line is entirely reconfigured into several serus. We formulate a mathematical model with double objectives which aim to minimize the total training cost and to balance the total processing times among multi-skilled workers in each seru. To obtain the satisfied task-to-worker training plan and worker-to-seru assignment plan, a three-stage heuristic algorithm with nine steps is developed to solve this mathematical model. Then, several computational cases are taken and computed by MATLAB programming. The computation and analysis results validate the performances of the proposed mathematical model and heuristic algorithm. © 2013 Springer-Verlag London.

Actinomycetes and earthy-musty odorous compounds in brackish fishponds in Tianjin, China

The presence of the odorous compounds, 2-methylisoborneol (MIB) and geosmin, as well as causative microorganisms in brackish intensive cultivation fishponds in Tianjin, China that had a severe earthy-musty odor were evaluated. The results revealed that MIB was the primary odorous compound present in the Tianjin fishponds, with a concentration ranging from 0.53-5302.7 ng.L-1. Furthermore, the concentration of MIB was found to be closely correlated with the gross biomass of actinomycetes in the water, which ranged from 10.67-1528.24 x 10(6) cfu.ml(-1). Therefore, the sequences of the 16 SrRNA and morphological characteristics of the actinomycetes in the brackish fishponds were investigated. The results revealed that the actinomycetes in the brackish fishponds included 9 species of common and dominant actinomycetes belonging to 4 genera. Of these genera, Streptomyces were the dominant species, and Streptomyces, Nocardioides and Micromonospora were the most common species in the fishponds evaluated. Next, the ability of each of the isolated Streptomyces to produce MIB was measured under laboratory culture conditions. Streptomyces Sp2 was found to have a strong ability to produce MIB, which indicates that this strain may be the primary source of the earthy-musty odor reported in brackish intensive cultivation fishponds in Tianjin, China.

Si-based optoelectronic devices and their attractive applications

The semiconductor photonics and optoelectronics which have a great significance in the development of advanced high technology of information systems will be discussed in this paper. The emphasis will be put on the recent research carried out in our laboratory in enhanced luminescence from low dimensional materials such as SiGe/Si and Er-doped Si-rich SiO2/Si and Er-doped SixNy/Si. A ring shape waveguide structure, used to promote the effective absorption coefficient in PIN photodetector for 1.3 mu m wavelength and a resonant cavity enhanced structure, used to improve the quantum efficiency and response in heterostructure photo-transistor (HPT), are also proposed in this paper.

基于线程的并发控制技术研究与应用

高效的并发控制策略可以提高系统的并行处理能力、改善交互响应时间。该文讨论了并发编程的复杂性,分析了4种基于线程的并发结构。目前,基于线程的并发控制技术已成功地应用到了分布事务监控器OnceTX中。

Si-based optoelectronic devices and their attractive applications

The semiconductor photonics and optoelectronics which have a great significance in the development of advanced high technology of information systems will be discussed in this paper. The emphasis will be put on the recent research carried out in our laboratory in enhanced luminescence from low dimensional materials such as SiGe/Si and Er-doped Si-rich SiO2/Si and Er-doped SixNy/Si. A ring shape waveguide structure, used to promote the effective absorption coefficient in PIN photodetector for 1.3 mu m wavelength and a resonant cavity enhanced structure, used to improve the quantum efficiency and response in heterostructure photo-transistor (HPT), are also proposed in this paper.

基于视觉和超声信息的机器人行为控制

随着机器人应用范围的不断扩展,机器人所面临的工作环境也越来越复杂,多数是未知的、动态的和非结构化的。通过对基于行为的机器人控制技术的研究,设计了一种用于完成多目标任务的移动机器人行为控制系统。将基于行为的控制技术融合进模糊控制的思想中,使移动机器人的行为通过运用模糊控制和基于优先度的行为决策来实现,并且通过视觉信息使机器人能够完成面向目标的任务。

小型无人直升机实验平台的设计与实现

高级控制算法对于无人直升机实现高机动性非常重要,但是在实现上也经常受制于鲁棒性和实时性的要求。同时这些控制方法在飞行测试时也会带来高风险。本文介绍了一种自制的安装在机械臂上的直升机作为实验平台去验证控制方法的有效性和可行性,这个平台还能够保证飞行测试的安全性。实验结果显示,能够实现转速跟踪控制以及航向动力学的辨识,并证明平台的有效性。

数字化生产线离散制造过程仿真研究

数字化工厂是目前先进制造技术研究的热点。进行内嵌在生产线数字化制造环境中的离散制造过程仿真研究,建立了面向对象的系统模型,分析了仿真运行机理;同时基于eM-Plant软件开发离散制造过程仿真系统,通过具体的生产线实例说明系统的开发与运行机理,提供数字化生产线离散制造过程仿真研究的有效手段。

拟人机器人交互作用力的研究

拟人机器人的动力学具有高度非线性、高度耦合的特点,分析清楚各组成部分之间的交互作用力是实施高级控制方法的基础。文章在以往分析移动机械手的基础上,从整体建模的角度入手,对拟人机器人的交互作用力提出了一个新的模型,即神经网络模型。利用该模型对一个特殊的单一手臂运动的例子进行了拟合,其结果是收敛的。这说明提出的模型是有效的,此后,我们将陆续给出研究成果。

基于web的远程控制机器人研究

Internet连接了全球的计算机 ,它为人们提供了分享数据、图片、影像甚至实时影像的机会 ,但与远程地点的真实交互还是离不开象机器人这样的智能设备 .Web技术与机器人控制技术的结合 ,促成了基于 web的远程控制机器人概念的诞生 .本文将就基于 web的远程控制机器人的发展历程、研究现状、主要技术与实现、发展趋势及应用前景等做综合的介绍 .

微操作机器人系统及其关键技术研究

微制作机器人技术是MEMS技术的一个重要分支，也是当前机器人研究领域的一个热点。本文分析了微操作机器人集成系统的特点，并针对微制作机器人系统研制中涉及的一些关键技术，如驱动、定位、检测和控制等技术进行了论述。