The response of vegetation on the Andean flank in western Amazonia to Pleistocene climate change

A reconstruction of past environmental change from Ecuador reveals the response of lower montane forest on the Andean flank in western Amazonia to glacial-interglacial global climate change. Radiometric dating of volcanic ash indicates that deposition occurred ~324,000 to 193,000 years ago during parts of Marine Isotope Stages 9, 7, and 6. Fossil pollen and wood preserved within organic sediments suggest that the composition of the forest altered radically in response to glacial-interglacial climate change. The presence of Podocarpus macrofossils ~1000 meters below the lower limit of their modern distribution indicates a relative cooling of at least 5°C during glacials and persistence of wet conditions. Interglacial deposits contain thermophilic palms suggesting warm and wet climates. Hence, global temperature change can radically alter vegetation communities and biodiversity in this region.

Data insertion in volcanic ash cloud forecasting

During the eruption of Eyjafjallajökull in April and May 2010, the London Volcanic Ash  Advisory Centre demonstrated the importance of infrared (IR) satellite imagery for monitoring volcanic ash and validating the Met Office operational model, NAME. This model is used to forecast ash dispersion and forms much of the basis of the advice given to civil aviation. NAME requires a source term describing the properties of the eruption plume at the volcanic source. Elements of the source term are often highly uncertain and significant effort has therefore been invested into the use of satellite observations of ash clouds to constrain them. This paper presents a data insertion method, where satellite observations of downwind ash clouds are used to create effective ‘virtual sources’ far from the vent. Uncertainty in the model output is known to increase over the duration of a model run, as inaccuracies in the source term, meteorological data and the parameterizations of the   modelled processes accumulate. This new technique, where the dispersion model (DM) is ‘reinitialized’ part-­way through a run, could go some way to addressing this.

Yellowstone Super-Volcano: Evalutaion, Potential Threats, and Possible effects on Nebraska Citizens Health and Prosperity

Abstract Yellowstone National Park is located over a hot spot under the North American tectonic plate and holds a potentially explosive super-volcano that has the ability to cause deadly consequences on the North American continent. After an eruption the surrounding region would see the greatest devastation, covered by pyroclastic deposits and thick ash fall exterminating most all life and destroying all structures in its path. In landscapes of greater distance from the event the consequences will be less dramatic yet still substantial. Records of previous eruption data from the Yellowstone super-volcano show that the ash fall out from the eruption can cover areas as large as one million square kilometers and could leave Nebraska covered in ash up to 10 centimeters thick. This would cause destruction of agriculture, extensive damage to structures, decreased temperatures, and potential respiratory hazards. The effects of volcanic ash on the human respiratory system have been shown to cause acute symptoms from heavy exposure. Symptoms include nasal irritation, throat irritation, coughing, and if preexisting conditions are present some can develop bronchial symptoms, which can last for a few days. People with bronchitis and asthma are shown to experience airway irritation and uncomfortable breathing. In most occurrences, exposure of volcanic ash is too short to cause long-term health hazards. Wearing facial protection can alleviate much of the symptoms. Most of the long-term ramifications of the eruption will be from the atmospheric changes caused from disruption of solar radiation, which will affect much of the global population. The most pertinent concerns for Nebraska citizens are from the accumulation of ash deposits over the landscape and the climatic perturbations. Potential mitigation procedures are essential to prepare our essentially unaware population of the threat that they may soon face if the volcano continues on its eruption cycle.

Diatoms and Tonsteins as Paleoenvironrnental and Paleodepositional Indicators in a Miocene Coal Bed, Costa Rica

Fresh-water diatoms are present in coal, and tonsteins (altered volcanic ash) are interbedded with the coal, in the Miocene Venado Formation on the southwest margin of the Limon Basin, in Provincia Alajuela, northern Costa Rica. The Venado Formation is composed of more than 300 m of mudstone, siltstone, sandstone, limestone, volcaniclastics, and coal beds. The coal beds are of unknown lateral extent and mainly occur in the middle part of the formation. The Pataste coal bed occurs near the middle of the formation and is divided into three parts by two tonstein layers. The abundance of biogenic opaline material (diatoms) in the coal is believed to be a direct response to an influx of silica from volcanic tuffs that Later altered to the tonsteins. Diatoms are a useful microscopic tool for identifying the depositional environments of the Pataste coal deposit. The diatoms identified include Aulacosira ambigua, Pinnularia sp., Eunotia spp., and Achnanthes exigua, among others. The abundance of Aulacosira arnbigua suggests that an open-water lacustrine environment was present locally. Achnanthes exigua and the remaining diatom species are benthic forms that lived in shallow fresh-water to slightly acidic swamp environments. The different types of diatoms found in the coal indicate that swamp environments were intermixed with lacustrine environments during the formation of the peat deposit or that the coal records environmental changes through time.

Los depósitos de ceniza volcánica del Pleistoceno Superior-Holoceno de la región de Tafí del Valle-Cafayate, noroeste de Argentina

VIII Congreso geológico de España, Oviedo, 17-19 julio 2012

Stratigraphy and Palaeontology of the Late Cretaceous Wapiti Formation, west-central Alberta, Canada

A complete stratigraphic assessment and revision of the middle Campanian to upper Maastrichtian Wapiti Formation in north-western Alberta and north-eastern British Columbia is the main aim of this research project. The study area encompasses an area of approximately 200X180 km in the Grande Prairie County (west-central Alberta) and easternmost British Columbia, Canada. Results presented here indicate that the 1300m thick succession currently reported in the literature as “undifferentiated lithostratigraphic unit”, consists of five lithostratigraphic units and four unconformity-bounded depositional sequences; their study and description have been documented integrating several geological disciplines, including sequence stratigraphic methods, well-log signatures, facies analysis, and fossil associations. On the whole, particular attention has been given to 1) age and nature of both basal and upper contacts of the Wapiti Formation, 2) effective mappability of lithostratigraphic units and depositional sequences in western Alberta, and 3) the identification of previously undetermined maximum flooding surface of the Bearpaw seaway and Drumheller Marine Tongue, which are reference marine unit in central and southern Alberta. A second, but not less important, guideline for the project has been the rich paleontological record of the Wapiti deposits. Detailed paleoenvironmental and taxonomical information on old and new finds have been the base for correlation with well known associations of Alaska, southern Alberta, and Montana. Newly discovered rich fossil localities documented an extraordinarily diverse fauna during the latest Cretaceous, including dinosaurs, squamates, and fresh-water fishes and reptiles. Lastly, in order to better characterize the Wapiti Formation, major marker beds were described: these include several bentonites (altered volcanic ash deposits) which have been documented over an area of almost 30.000 km2, as well as four major coal zones, characterized by tabular coal seams with an overall thickness of 2 meters. Such marker beds represent a formidable tool for high-resolution chronology and regional correlations within the Late Cretaceous Alberta foreland basin.

Elaboration et caractérisation de ciments géopolymères à base de scories volcaniques

Two types of volcanic ashes referenced as ZD (volcanic ashes from Djoungo) and ZG (volcanic ashes from Galim) were collected from two Cameroonian localities. They were characterized (chemical and mineralogical compositions, amorphous phase content, particle size distribution and specific surface area) and used as raw materials for the synthesis of geopolymer cements at ambient temperature of laboratory (24 ± 3 °C). The synthesized products were characterized by determining their setting time, linear shrinkage and compressive strength, X-ray Diffraction, Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy. The mineralogical composition, the amorphous phase content, the particle size distribution, the specific surface area of the volcanic ashes as well as the mass ratio of the alkaline solution (sodium silicate / sodium hydroxide) were the main parameters which influenced the synthesis of geopolymers with interesting characteristics at ambient temperature (24 ± 3 °C). The volcanic ashes (ZD) whose mineralogical composition contained anhydrite, low amorphous phase content and low specific surface area led to long setting times. Moreover, its products swelled and presented cracks due to the formation of ettringite and these resulted in low compressive strengths (7 to 19 MPa). The volcanic ashes (ZG) containing high amounts of amorphous phase and high specific surface area led geopolymers with setting times between 490 and 180 minutes and compressive strength between 7 and 50 MPa at ambient temperature of laboratory. The properties of geopolymers were improved when elaborated with a mixture of volcanic ashes and metakaolin (ZD–MK and ZG–MK). For geopolymers obtained from ZD–MK, the setting time was between 500 and 160 minutes while it was between 220 and 125 minutes for geopolymers obtained from ZG–MK. The compressive strength greatly increased between 23 and 68 MPa and 39 and 64 MPa for geopolymers obtained from ZG –MK and ZD–MK respectively. A comparative study of the properties of mixtures of metakaolin–alumina and volcanic ash–alumina based geopolymers shows that metakaolin is a good source of Al2O3 and SiO2 and which highly reactive with alkaline solution and produces geopolymers with better characteristics compared to volcanic ash based–geopolymer. The properties of volcanic ash–based geopolymer were also improved when amorphous alumina was incorporated into the volcanic ash. This additive is used to compensate the deficiencies in Al2O3 content in the volcanic ash. Compare to when volcanic ash is used alone 20 to 40 % incorporation of this additive corresponded to increases of the compressive strength by 18.1 % for metakaolin-alumina based-geopolymers and by 32.4 % for volcanic ash-based geopolymers.

Numerical and granulometric approaches to geophysical granular flows

Volcanic ash clouds can be fed by an upward-directed eruption column (Plinian column) or by elutriation from extensive pyroclastic-flows (coignimbrite cloud). For large-scale eruptions, there is considerable uncertainty about which mechanism is dominant. Here we analyze in a novel way a comprehensive grainsize database for pyroclastic deposits. We demonstrate that the Mount Pinatubo climactic eruption deposits were substantially derived from coignimbrite clouds, and not only by a Plinian cloud as generally thought. Coignimbrite ash-fall deposits are much richer in breathable <10 m ash (5–25 wt%) than pure Plinian ash at most distances from the source volcano. We also show that coignimbrite ash clouds, as at Pinatubo, are expected to be more water rich than Plinian clouds, leading to removal of more HCl prior to stratospheric injection, thereby reducing their atmospheric impact.

Auriferous Tertiary Gravels Near Rocker, in Silver Bow County, Montana

Between the villages of Rocker and Silver Bow, in south­western Montana, are found an interesting group of placers. Gold occurs in Tertiary gravel beds that are interstratified with beds of rhyolitic volcanic ash. With the aid of a plane table and open-sight alidade, a small portion of the lake-bed area near Rocker was mapped; all distances were paced, but numerous checks assure a fairly accurate map.

Age modeling of young non-varved lake sediments: methods and limits. Examples from two lakes in Central Chile

High-resolution and highly precise age models for recent lake sediments (last 100–150 years) are essential for quantitative paleoclimate research. These are particularly important for sedimentological and geochemical proxies, where transfer functions cannot be established and calibration must be based upon the relation of sedimentary records to instrumental data. High-precision dating for the calibration period is most critical as it determines directly the quality of the calibration statistics. Here, as an example, we compare radionuclide age models obtained on two high-elevation glacial lakes in the Central Chilean Andes (Laguna Negra: 33°38′S/70°08′W, 2,680 m a.s.l. and Laguna El Ocho: 34°02′S/70°19′W, 3,250 m a.s.l.). We show the different numerical models that produce accurate age-depth chronologies based on 210Pb profiles, and we explain how to obtain reduced age-error bars at the bottom part of the profiles, i.e., typically around the end of the 19th century. In order to constrain the age models, we propose a method with five steps: (i) sampling at irregularly-spaced intervals for 226Ra, 210Pb and 137Cs depending on the stratigraphy and microfacies, (ii) a systematic comparison of numerical models for the calculation of 210Pb-based age models: constant flux constant sedimentation (CFCS), constant initial concentration (CIC), constant rate of supply (CRS) and sediment isotope tomography (SIT), (iii) numerical constraining of the CRS and SIT models with the 137Cs chronomarker of AD 1964 and, (iv) step-wise cross-validation with independent diagnostic environmental stratigraphic markers of known age (e.g., volcanic ash layer, historical flood and earthquakes). In both examples, we also use airborne pollutants such as spheroidal carbonaceous particles (reflecting the history of fossil fuel emissions), excess atmospheric Cu deposition (reflecting the production history of a large local Cu mine), and turbidites related to historical earthquakes. Our results show that the SIT model constrained with the 137Cs AD 1964 peak performs best over the entire chronological profile (last 100–150 years) and yields the smallest standard deviations for the sediment ages. Such precision is critical for the calibration statistics, and ultimately, for the quality of the quantitative paleoclimate reconstruction. The systematic comparison of CRS and SIT models also helps to validate the robustness of the chronologies in different sections of the profile. Although surprisingly poorly known and under-explored in paleolimnological research, the SIT model has a great potential in paleoclimatological reconstructions based on lake sediments

Lake-level rise in the late Pleistocene and active subaquatic volcanism since the Holocene in Lake Kivu; East African Rift

The history of Lake Kivu is strongly linked to the activity of the Virunga volcanoes. Subaerial and subaquatic volcanoes, in addition to lake-level changes, shape the subaquatic morphologic and structural features in Lake Kivu's Main Basin. Previous studies revealed that volcanic eruptions blocked the former outlet of the lake to the north in the late Pleistocene, leading to a substantial rise in the lake level and subsequently the present- day thermohaline stratification. Additional studies have speculated that volcanic and seismic activities threaten to trigger a catastrophic release of the large amount of gases dissolved in the lake. The current study presents a bathymetric mapping and seismic profiling survey that covers the volcanically active area of the Main Basin at a resolution that is unprecedented for Lake Kivu. New geomorphologic features identified on the lake floor can accurately describe related lake-floor processes for the first time. The late Pleistocene lowstand is observed at 425 m depth, and volcanic cones, tuff rings, and lava flows observed above this level indicate both subaerial and subaquatic volcanic activities during the Holocene. The geomorphologic analysis yields new implications on the geologic processes that have shaped Lake Kivu's basin, and the presence of young volcanic features can be linked to the possibility of a lake overturn.

Deep-sea sediment core PS2644 record from the southern Greenland Sea

The PS2644 deep-sea core sequence, retrieved from the northwestern margin of Iceland and covering the last 86 ka, exhibits high sedimentation rates during the last glacial cycle that allow the clear distinction of Greenland stadial (GS)/ interstadial (GI) cycles in the various proxy records. Abundance records of rhyolitic, basaltic and tachylytic tephra grains reveal several maxima. Tephra grains of all types were geochemically analyzed in 44 levels. A total of 92 tephras with a distinctive character have been defined within the glacial sequence of gravity core PS2644-5, whereas the Holocene record is dominated by reworked Vedde Ash grains and not suitable for tephra stratigraphic work. Of the 92 tephras only 19 geochemical populations have been linked with confidence to previously defined tephras such as from the Vedde Ash, Faeroe Marine Ash Zones (FMAZ) II and III and North Atlantic Ash Zone (NAAZ) II. For the glacial period informal names were given to 78 new tephras, most of which are basaltic tephras. Several of these layers have a unique geochemical character and might become new chronostratigraphic markers in the North Atlantic region. Linking the tephra populations to the volcanic system producing them, respectively, revealed that Icelandic eruptions dominate with 83 tephra geochemical populations and Jan Mayen with 9. Around 48% of the informal tephra layers linked to the Icelandic volcanic province are produced from either the Grimsvötn or the Veidivötn-Bardarbunga volcanic systems. The intervals spanning from Greenland Stadial (GS) 3 to Greenland Interstadial (GI) 4 (24.5-29 ka BP), from GI 8 to GS 10 (36.9-40.5 ka BP) and from GI 14 to GI 15.2 (50-56 ka BP) are the periods with the highest number of eruptions, all of which are associated with known tephra zones.