New material for orthopedic implants: Electrochemical study of nickel free P558 stainless steel in minimum essential medium

Nickel, a component of stainless steels (SS) applied in orthopedic implants may cause allergic processes in human tissues P558 nickel free SS was studied to verify its viability as a substitute for stainless steel containing nickel Its performance is compared to ISO 5832-9 and F138 most used nowadays grades in implants fabrications, in minimum essential medium. MEM, at 37 degrees C. Potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and ""in vitro"" cytotoxicity were used as techniques. From the electrochemical point of view P558 SS is comparable to ISO 5832-9 SS in MEM It remains passivated until the transpassivation potential, above which generalized corrosion occurs F138 presents pitting corrosion at 370 mV/SCE. The cytotoxicity results showed that P558. ISO 5832-9 and F138 do not present cytotoxic character Therefore, these results suggest that P558 SS can be applied in orthopedic implants (C) 2010 Elsevier BV All rights reserved

Internationalization of SME and entry mode choice in Brazil: the case study of Ameco, a French SME

O objetivo da pesquisa é analisar, para uma PME francesa, a atratividade de dois mercados-alvo no Brasil, a fim de apoiar a tomada de decisão do CEO sobre o investimento futuro. Para enfrentar a crise da União Europeia, muitas PMEs francesas estão procurando novas oportunidades em todo o mundo, especialmente nos países BRIC. Na verdade, o Brasil parece ser um mercado promissor, oferecendo inúmeras oportunidades de crescimento. No entanto, em comparação com as empresas multinacionais tradicionais, as PMEs têm de lidar com a falta de recursos e de poder de mercado. Ir global é arriscado e caro para as PMEs; o que implica avaliar cuidadosamente a viabilidade da implementação de um investimento estrangeiro. A análise revelou que o Brasil é um mercado de aproximadamente 30 milhões de euros, nos próximos 10 anos. Este é definitivamente um mercado promissor para uma empresa como AMECO. Levando em conta esses critérios, AMECO deve abrir um escritório de representação no próximo ano para angariar novos clientes e assinar novos contratos.

Motivation of german entrepreneurs to seek equity via crowdfunding: an exploratory study

Equity crowdfunding, ou financiamento de um projeto ou empreendimento através de diversos pequenos investimentos ou um grande grupo de investidores, tem recebido uma crescente atenção da mídia e acadêmicos. A discussão questiona se crowdfunding pode de uma forma geral transformar a maneira como as pessoas captam capital para os seus negócios. Enquanto que pesquisas tem até então focado em explorar porque crowdinvestors têm motivação em financiar empreitadas, este estudo foca em revelar o que motiva empreendedores a procurar soluções de crowdfund. Para isso, o estudo investigou a motivação de 11 empreendedores que usaram plataformas alemãs de crowdfunding. Como estudos existentes sobre a motivação de empreendedores são na sua grande maioria superficiais, este estudo utiliza uma nova abordagem de pesquisa na área de financiamento de projetos, a abordagem de means-end. Sob essa abordagem a forma de pensar dos empreendedores em relação ao uso de equity crowdfunding foi estudada de forma holística, revelando todo o processo de raciocínio até a decisão final de optar por uma estratégia de crowdfunding. Uma das descobertas é que empreendedores usam equity crowdfunding para arrecadar fundos de crowdinvestors consideravelmente não-racionais (emocionais) para financiar o crescimento futuro de seus negócios e também sinalizar viabilidade de investimento para futuros investidores. Além disso, empreendedores esperam que crowdinvestors sejam engajados e ajudem tanto a promover o negócio como a dar feedback. Crowdfunding também possibilita que empreendedores mantenham o poder de decisão sobre a empresa mais facilmente se comparado a outras fontes tradicionais de financiamento. As descobertas indicam que crowdfunding atrai empreendedores que não conseguiriam arrecadar investimentos a partir de outras fontes de capital assim como empreendedores que entendem os benefícios adicionais que esta oferece em relação à outras fontes.

Probiotic in feeding of juvenile matrinxã (Brycon amazonicus): economic viability

Objetivou-se analisar a viabilidade econômica do uso do probiótico Bacillus subtilis na alimentação de matrinxã Brycon amazonicus, em tanques-rede. O experimento foi conduzido no Polo Regional do Vale do Ribeira, no município de Pariquera-Açu, São Paulo, Brasil, entre fevereiro e julho de 2009. Foram avaliados 960 peixes juvenis, divididos em 12 tanques-rede de 2,7 m³ (1,5 x 1,5 x 1,2 m) em uma área total de 600 m², com profundidade média de 1,50 m. Os testes foram conduzidos com um tratamento testemunha (T1), duas doses de probiótico (T2 = 5 g e T3 = 10 g kg-1 de ração) e quatro repetições. Os resultados mostraram que o T2 proporcionou melhor desempenho zootécnico e econômico da matrinxã na fase de engorda no sistema intensivo de criação.

Economic viability of the piaucu Leporinus macrocephalus (Garavello & Britski, 1988) production

Brazilian fish farms presented an accelerated development during the early 90's, mainly because of the increase in fee-fishing operations. To meet the demand of this market, fish production and supply became excessive and, as a consequence, the number of fee-fishing operations, farmers and the final selling price, decreased. This study analyzes the technical aspects, production cost, profitability and economic viability of the production of piaucu (L. macrocephalus) in ponds, based on information from a rural property. Feeding and fingerling costs amount to approximately 47.1 % of the total production cost, representing together with the final selling price the most important factor affecting profitability. The payback period was 8.3 years, the liquid present value US$ 291.07, the internal return margin 9%, and the income-outcome ratio was 1.01, which represents an unattractive investment as a projection based on current conditions. The improvement in productive efficiency enhances the economic valuation index, and that the relative magnitude of cost and income are the most important points for the economic viability of the studied farm.

Detached leaf culture: Viability to evaluate 2,4-D toxicity symptoms in cotton apex leaves

To study the viability of detached leaf culture technique, studies were carried out with detached leaves from cotton apex (true trilobed leaves). The prepared leaves were sprayed with 2,4-D amine and ester, at rates of 10, 30, 70, and 100% of the recommended doses. Detached leaves without herbicide spray were used as controls. Simultaneously, a greenhouse experiment was conducted with the same treatments as used for the detached leaves experiment. Toxicity was measured through a 0-to-5 grading according to the percentage of affected leaf area in the detached leaves experiment or examining the affected rate of whole plant as indicated in the greenhouse. Results showed that the ester form of the herbicide induced earlier and more severe toxicity symptoms in detached leaves and greenhouse grown plants. Positive and significant correlations (p < 0.001) were found between toxicity results obtained at 7 and 14 days after application in detached leaves and greenhouse plants (r = 0.97 and 0.92, respectively). Negative, significant correlations (p < 0.005) were found between the toxicity levels found at 7 and 14 days after application in detached leaves and dry matter of cotton plants grown in the greenhouse (r = -0.92 and -0.92, respectively).

Modified stabilization method for the tibial tuberosity advancement technique: a biomechanical study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mechanical resistance of the modified stabilization method for the tibial tuberosity advancement technique: ex vivo experimental study in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of semen storage and cryoprotectant on post-thaw viability and fertility of stallion spermatozoa

The aim of the current study was to verify that stallion, spermatoza could be cooled for 24 hours and then frozen. In experiment I, one ejaculate from each of 13 stallions was used. Semen was collected and split into two parts; one part immediately frozen using standard cryo-preservation techniques and the other diluted, stored in an Equitainer for 24 hours, and then frozen. In experiment II, one ejaculate from each of 12 stallions was collected, diluted with Botu-Semen, and split into two parts: one cooled in an Equitainer and the other in Max-Semen Express without prior centrifugation. After 24 hours of cooling, the samples were centrifuged to remove seminal plasma and concentrate the sperm, and resuspended in Botu-Crio (R) extender containing on e of three cryoprotectant treatments (1% glycerol + 4% dimethylformamide, 1% glycerol + 4% dimethylacetamide and 1% glycerol + 4% methylformamide), maintained at 5 degrees C for 20 minutes, then frozen in nitrogen vapour. No difference was observed between the two cooling systems. The association of 1% glycerol and 4% methylformamide provided the best post-thaw progressive motility. For experiment III, two stallions were used for a fertility trial. Forty three inseminations were performed using 22 mares. No differences were seen in semen parameters and pregnancy rates when comparing the two freezing protocols (conventional and cooled/frozen). Pregnancy rates for conventional and cooled/frozen semen were, respectively, 72.7% and 82.3% (stallion A), and 40.0% and 50.0% (stallion B). We concluded that cooling equine-semen for 24 hours before freezing while maintaining sperm viability and fertility is possible.

Viability and cell cycle analysis of equine fibroblasts cultured in vitro

This experiment aimed to study equine fibroblasts in culture analyzing and the cell cycle and viability of cells pre- and post-freezing. Skin fragments were obtained from 6 horses and cultured in DMEM high glucose + 10% FCS in 5% CO(2) until the beginning of confluence. Two passages were performed before freezing. Cells subjected to serum starvation (0.5% FCS) were analyzed for viability and cell cycle at 24, 48, 72, 96, 120, 144 and 168 h of culture. For the confluent groups, cells were analyzed at the moment they achieved confluence. Cellular viability was assisted with Hoescht 33342 and propidium iodide. The analysis of apoptosis/necrosis and cell cycle was performed using a flow cytometer (FACS Calibur BD(A (R))) after staining the cells with annexin V and propidium iodide. Both optical microscopy and flow cytometry confirmed that cellular viability was similar for serum starvation and confluent groups (average 84%). Similarly, both methods were efficient to synchronize the cell cycle before freezing. However, after thawing, serum starvation, for more than 24 h, was superior to culture for synchronizing cells in G0/G1 (69% x 90%). The results of this experiment indicate that equine fibroblasts can be efficiently cultured after thawing.

Viability of OPS Vitrified Sheep Embryos After Direct Transfer

The aim of this study was to evaluate the viability in the effect of open pulled straw (OPS) vitrification procedure of sheep embryos after direct transference. Embryos were produced in vivo and cryopreserved in slow freezing or OPS vitrification. The survival rates of cryopreserved embryos were compared to non-frozen standard pattern. In a first set of experiments, embryos at morula and blastocyst stages were dived in ethylene glycol (1.5 M) and frozen in an automatic freezer. After being thawed, they were directly or indirectly transferred to ewes recipient. A second group of embryos were drawn into OPS and plunged into liquid nitrogen after being exposed at room temperature for 1 min and 45 s in 10% EG plus 10% dimethyl sulphoxide (DMSO), then again for 30 s in 20% EG + 20% DMSO + 0.5 M sucrose. After being warmed, embryos were also directly transferred using a French mini straw as the catheter for the transplantation process or after in vitro dilution of cryoprotectants (two-step-process). No significant difference was observed among fresh, frozen or vitrified embryos on pregnancy rate (50.0%, 38.6% and 55.8%). However, when we evaluated only the direct transference, the pregnancy rate of OPS vitrified embryos was higher than that of frozen embryos (57.1% vs 34.8%) (p = 0.07). In addition, vitrified morulae had a higher pregnancy rate than the one with frozen embryos (64.0% vs 38.9%) (p = 0.07). Finally, our results indicate that OPS vitrification technique in association with direct transference improves the viability of sheep embryos with potential applications to field conditions.

Motility and viability of ram sperm cryopreserved in a Tris-egg yolk extender supplemented with anti-oxidants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of refrigeration systems upon frozen bull sperm viability assessed by computer-assisted sperm analysis and fluorescent probes

Sperm cryopreservation success depends upon the maintenance of spermatozoa fertility potential. Sperm cells must preserve both integrity and functionality of several cell structures. The stabilization phase must allow the exit of water from the sperm cells via osmosis. This study aimed to compare the effect of refrigeration in the commercial refrigerator (CR) and the transport/refrigeration box (TRB) upon the viability of frozen bull sperm diluted in three different extenders (A, B and C). Ten Nellore bulls, Bos taurus indicus maintained in Artificial Insemination Center were used and the spermatozoa samples was assessed for Plasma Membrane Integrity and CASA evaluation. The stabilization phase (5 degrees C/4 hours) was performed in the CR as well as in the TRB, and then samples were exposed to nitrogen vapor during 20 minutes and then plunged into nitrogen. The statistical analysis was done using the variance analysis and the significance level was set at 5%. In the CR the post-thawing parameters for PM and ALH were higher (p < 0.05) in the extender A (glicine egg-yolk) and extender B (glicine egg-free) when compared with extender C (TRIS egg-yolk). As for BCF, STR and LIN, the parameters were higher (p < 0.05) in extender B than in C. Samples that were stabilized in the TRB presented higher post-thawing parameters (p < 0.05) for PM and LIN in extender A and extender B when compared with C. BCF and STR parameters were higher (p < 0.05) in extemder B when compared with C. Extender B samples had higher (p < 0.05) PMI when stabilized in CR. The findings in this experiment enable us to say that both CR and TRB were effective in keeping the viability of post-thawing bull semen.

Clinical Viability for Immediate Loading of Dental Implants: Part II-Treatment Alternatives

The treatment with implants aims to obtain a direct interface between bone and implant. The implant is kept load-free during 4 to 6 months in the 2-stage procedure, which is considered a requisite for osseointegration. However, this period is based on empirical principles and uncomfortable for patient. So, the immediate loading protocol was Suggested to submit implants to occlusal function after placement. This protocol has been applied for several conditions of edentulism. The aim of this study was to evaluate the treatment alternatives for immediate loading of complete and partial edentulous patients. In general, the studies have demonstrated high previsibility for rehabilitation of complete edentulous arches with full-arch, implant-supported prosthesis. The rehabilitation with immediate loading for maxillary overdenture is questionable because there is no longitudinal study in literature. The studies with partial edentulous arches have demonstrated high success rates for implants placed in the mandibular and maxillary anterior region. Additional care is recommended for posterior region mainly in the maxillary arch, and further studies are suggested to corroborate this treatment.