Monitoring process mean and variability with one non-central chi-square chart

Traditionally, an (X) over bar -chart is used to control the process mean and an R-chart to control the process variance. However, these charts are not sensitive to small changes in process parameters. A good alternative to these charts is the exponentially weighted moving average (EWMA) control chart for controlling the process mean and variability, which is very effective in detecting small process disturbances. In this paper, we propose a single chart that is based on the non-central chi-square statistic, which is more effective than the joint (X) over bar and R charts in detecting assignable cause(s) that change the process mean and/or increase variability. It is also shown that the EWMA control chart based on a non-central chi-square statistic is more effective in detecting both increases and decreases in mean and/or variability.

A stochastic shift model for economically designed charts constrained by the process stage configuration

An economic model including the labor resource and the process stage configuration is proposed to design g charts allowing for all the design parameters to be varied in an adaptive way. A random shift size is considered during the economic design selection. The results obtained for a benchmark of 64 process stage scenarios show that the activities configuration and some process operating parameters influence the selection of the best control chart strategy: to model the random shift size, its exact distribution can be approximately fitted by a discrete distribution obtained from a relatively small sample of historical data. However, an accurate estimation of the inspection costs associated to the SPC activities is far from being achieved. An illustrative example shows the implementation of the proposed economic model in a real industrial case. (C) 2011 Elsevier B.V. All rights reserved.

A single statistic for monitoring the covariance matrix of bivariate processes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo do desempenho dos gráficos de controle quando a média do processo oscila de acordo com o modelo AR(1)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Metodologia de amostragens para monitoramento do ácaro da leprose Brevipalpus phoenicis (Geijskes, 1939) em cultura de citros

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito de desinfecções sucessivas com energia de microondas na resistência de união entre dentes artificiais e resinas para bases de próteses

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Eficácia do clareamento dentário em superfícies submetidas á colagem ortodôntica de brackets sob diferentes protocolos

Pós-graduação em Ciências Odontológicas - FOAR

Revisão sistemática do perfil de risco e profilaxia de tromboembolismo venoso no Brasil e no mundo

Pós-graduação em Bases Gerais da Cirurgia - FMB

Variable patterns of Y chromosome homology in Akodontini rodents (Sigmodontinae): a phylogenetic signal revealed by chromosome painting

The Akodontini is the second most speciose tribe of sigmodontine rodents, one of the most diverse groups of neotropical mammals. Molecular phylogenetic analyses are discordant regarding the interrelationships of genera, with low support for some clades. However, two clades are concordant, one (clade A) with Akodon sensu strictu (excluding Akodon serrensis), "Akodon" serrensis, Bibimys, Deltamys, Juscelinomys, Necromys, Oxymycterus, Podoxymys, Thalpomys and Thaptomys, and another (clade B) with Blarinomys, Brucepattersonius, Kunsia, Lenoxus and Scapteromys. Here, we present chromosome painting using Akodon paranaensis (APA) Y paint, after suppression of simple repetitive sequences, on ten Akodontini genera. Partial Y chromosome homology, in addition to the homology already reported on the Akodon genus, was detected on the Y chromosomes of "A." serrensis, Thaptomys, Deltamys, Necromys and Thalpomys and on Y and X chromosomes in Oxymycterus. In Blarinomys, Brucepattersonius, Scapteromys and Kunsia, no APA Y signal was observed using different hybridization conditions; APA X paint gave positive signals only on the X chromosome in all genera. The Y chromosome homology was variable in size and positioning among the species studied as follow: (1) whole acrocentric Y chromosome in Akodon and "A." serrensis, (2) Yp and pericentromeric region in submetacentric Y of Necromys and Thaptomys, (3) pericentromeric region in acrocentric Y of Deltamys, (4) distal Yq in the acrocentric Y chromosome of Thalpomys and (5) proximal Yq in the acrocentric Y and Xp in the basal clade A genus Oxymycterus. The results suggest that the homology involves pairing (pseudoautosomal) and additional regions that have undergone rearrangement during divergence. The widespread Y homology represents a phylogenetic signal in Akodontini that provides additional evidence supporting the monophyly of clade A. The findings also raise questions about the evolution of the pseudoautosomal region observed in Oxymycterus. The Y chromosomes of these closely related species seem to have undergone dynamic rearrangements, including restructuring and reduction of homologous segments. Furthermore, the changes observed may indicate progressive attrition of the Y chromosome in more distantly related species.

Integrating on-line process control and imperfect corrective maintenance: An economical design

Existing studies of on-line process control are concerned with economic aspects, and the parameters of the processes are optimized with respect to the average cost per item produced. However, an equally important dimension is the adoption of an efficient maintenance policy. In most cases, only the frequency of the corrective adjustment is evaluated because it is assumed that the equipment becomes "as good as new" after corrective maintenance. For this condition to be met, a sophisticated and detailed corrective adjustment system needs to be employed. The aim of this paper is to propose an integrated economic model incorporating the following two dimensions: on-line process control and a corrective maintenance program. Both performances are objects of an average cost per item minimization. Adjustments are based on the location of the measurement of a quality characteristic of interest in a three decision zone. Numerical examples are illustrated in the proposal. (c) 2012 Elsevier B.V. All rights reserved.

ANALYSIS OF THE BALANCE CONTROL IN SURFERS DURING THE ERECT POSTURE

Background: Surfing is a sport that has become considerably popular, which increased interest in research about the aspects that can influence on the performance of these athletes, such as injuries, aerobic fitness and reaction time. Due to the ever-changing environment and high instability required for surfing, the surfers must develop some neuromuscular skills (agility, balance, muscle strength and flexibility) to acquire better performance in this modality. Nevertheless, there are still few scientific studies concerned about the investigation of these motor skills in surfing. Objective: The aim of this study was to evaluate the balance control in surfers compared to practitioners of other physical activities. Methods: Participants remained on a force platform while performing tasks involving visual deprivation (eyes open or closed) and somatosensory disturbance (steady surface or use of foam), with covariation of experimental conditions. The following variables were analyzed: speed and root mean square (RMS) displacement of the center of pressure in the anteroposterior (AP) and mediolateral (ML) directions. Results: The results showed no difference between groups during the experimental conditions, that is to say, both surfers and the control group varied over the conditions of eyes closed and on foam. Conclusion: Although surfing requires the surfer to have great balance control, the results did not reveal a relationship between this sport and better performance in balance control. However, we must consider the small sample size and the fact that this sport requires dynamic balance, while the study evaluated static balance.

Brazilian multicenter study on prevalence of preterm birth and associated factors

Abstract Background The occurrence of preterm birth remains a complex public health condition. It is considered the main cause of neonatal morbidity and mortality, resulting in a high likelihood of sequelae in surviving children. With variable incidence in several countries, it has grown markedly in the last decades. In Brazil, however, there are still difficulties to estimate its real occurrence. Therefore, it is essential to establish the prevalence and causes of this condition in order to propose prevention actions. This study intend to collect information from hospitals nationwide on the prevalence of preterm births, their associated socioeconomic and environmental factors, diagnostic and treatment methods resulting from causes such as spontaneous preterm labor, prelabor rupture of membranes, and therapeutic preterm birth, as well as neonatal results. Methods/Design This proposal is a multicenter cross-sectional study plus a nested case-control study, to be implemented in 27 reference obstetric centers in several regions of Brazil (North: 1; Northeast: 10; Central-west: 1; Southeast: 13; South: 2). For the cross sectional component, the participating centers should perform, during a period of six months, a prospective surveillance of all patients hospitalized to give birth, in order to identify preterm birth cases and their main causes. In the first three months of the study, an analysis of the factors associated with preterm birth will also be carried out, comparing women who have preterm birth with those who deliver at term. For the prevalence study, 37,000 births will be evaluated (at term and preterm), corresponding to approximately half the deliveries of all participating centers in 12 months. For the case-control study component, the estimated sample size is 1,055 women in each group (cases and controls). The total number of preterm births estimated to be followed in both components of the study is around 3,600. Data will be collected through a questionnaire all patients will answer after delivery. The data will then be encoded in an electronic form and sent online by internet to a central database. The data analysis will be carried out by subgroups according to gestational age at preterm birth, its probable causes, therapeutic management, and neonatal outcomes. Then, the respective rates, ratios and relative risks will be estimated for the possible predictors. Discussion These findings will provide information on preterm births in Brazil and their main social and biological risk factors, supporting health policies and the implementation of clinical trials on preterm birth prevention and treatment strategies, a condition with many physical and emotional consequences to children and their families.

Role of hepatitis C virus genotype 3 in liver fibrosis progression - a systematic review and meta-analysis

The progression of liver fibrosis in chronic hepatitis C has long been considered to be independent from viral genotypes. However, recent studies suggest an association between Hepatitis C virus (HCV) genotype 3 and accelerated liver disease progression. We completed a systematic review and meta-analysis of studies evaluating the association between HCV genotypes and fibrosis progression. PubMed, Embase and ISI Web of Knowledge databases were searched for cohort, cross-sectional and case-control studies on treatment-naïve HCV-infected adults in which liver fibrosis progression rate (FPR) was assessed by the ratio of fibrosis stage in one single biopsy to the duration of infection (single-biopsy studies) or from the change in fibrosis stage between two biopsies (paired biopsies studies). A random effect model was used to derive FPR among different HCV genotypes. Eight single-biopsy studies (3182 patients, mean/median duration of infection ranging from 9 to 21 years) and eight paired biopsies studies (mean interval between biopsies 2-12 years) met the selection criteria. The odds ratio for the association of genotype 3 with accelerated fibrosis progression was 1.52 (95% CI 1.12-2.07, P = 0.007) in single-biopsy studies and 1.37 (95% CI 0.87-2.17, P = 0.17) in paired biopsy studies. In conclusion, viral genotype 3 was associated with faster fibrosis progression in single-biopsy studies. This observation may have important consequences on the clinical management of genotype 3-infected patients. The association was not significant in paired biopsies studies, although the latter may be limited by important indication bias, short observation time and small sample size.

Effective population size of an indigenous Swiss cattle breed estimated from linkage disequilibrium

Effective population size is an important parameter for the assessment of genetic diversity within a livestock population and its development over time. If pedigree information is not available, linkage disequilibrium (LD) analysis might offer an alternative perspective for the estimation of effective population size. In this study, 128 individuals of the Swiss Eringer breed were genotyped using the Illumina BovineSNP50 beadchip. We set bin size at 50 kb for LD analysis, assuming that LD for proximal single nucleotide polymorphism (SNP)-pairs reflects distant breeding history while LD from distal SNP-pairs would reflect near history. Recombination rates varied among different regions of the genome. The use of physical distances as an approximation of genetic distances (e.g. setting 1 Mb = 0.01 Morgan) led to an upward bias in LD-based estimates of effective population size for generations beyond 50, while estimates for recent history were unaffected. Correction for restricted sample size did not substantially affect these results. LD-based actual effective population size was estimated in the range of 87-149, whereas pedigree-based effective population size resulted in 321 individuals. For conservation purposes, requiring knowledge of recent history (<50 generations), approximation assuming constant recombination rate seemed adequate.

Are sample sizes clear and justified in RCTs published in dental journals?

Sample size calculations are advocated by the CONSORT group to justify sample sizes in randomized controlled trials (RCTs). The aim of this study was primarily to evaluate the reporting of sample size calculations, to establish the accuracy of these calculations in dental RCTs and to explore potential predictors associated with adequate reporting. Electronic searching was undertaken in eight leading specific and general dental journals. Replication of sample size calculations was undertaken where possible. Assumed variances or odds for control and intervention groups were also compared against those observed. The relationship between parameters including journal type, number of authors, trial design, involvement of methodologist, single-/multi-center study and region and year of publication, and the accuracy of sample size reporting was assessed using univariable and multivariable logistic regression. Of 413 RCTs identified, sufficient information to allow replication of sample size calculations was provided in only 121 studies (29.3%). Recalculations demonstrated an overall median overestimation of sample size of 15.2% after provisions for losses to follow-up. There was evidence that journal, methodologist involvement (OR = 1.97, CI: 1.10, 3.53), multi-center settings (OR = 1.86, CI: 1.01, 3.43) and time since publication (OR = 1.24, CI: 1.12, 1.38) were significant predictors of adequate description of sample size assumptions. Among journals JCP had the highest odds of adequately reporting sufficient data to permit sample size recalculation, followed by AJODO and JDR, with 61% (OR = 0.39, CI: 0.19, 0.80) and 66% (OR = 0.34, CI: 0.15, 0.75) lower odds, respectively. Both assumed variances and odds were found to underestimate the observed values. Presentation of sample size calculations in the dental literature is suboptimal; incorrect assumptions may have a bearing on the power of RCTs.