Decimation Filter Design Toolbox for Multi-Standard Wireless Transceivers using MATLAB.

The demand for new telecommunication services requiring higher capacities, data rates and different operating modes have motivated the development of new generation multi-standard wireless transceivers. A multi-standard design often involves extensive system level analysis and architectural partitioning, typically requiring extensive calculations. In this research, a decimation filter design tool for wireless communication standards consisting of GSM, WCDMA, WLANa, WLANb, WLANg and WiMAX is developed in MATLAB® using GUIDE environment for visual analysis. The user can select a required wireless communication standard, and obtain the corresponding multistage decimation filter implementation using this toolbox. The toolbox helps the user or design engineer to perform a quick design and analysis of decimation filter for multiple standards without doing extensive calculation of the underlying methods.

Evaluation of Auditory Displays Supporting Aircraft Approach and Landing

Abstract: The paper describes an auditory interface using directional sound as a possible support for pilots during approach in an instrument landing scenario. Several ways of producing directional sounds are illustrated. One using speaker pairs and controlling power distribution between speakers is evaluated experimentally. Results show, that power alone is insufficient for positioning single isolated sound events, although discrimination in the horizontal plane performs better than in the vertical. Additional sound parameters to compensate for this are proposed.

What do patients want to know? An empirical approach to explanation generation and validation

This article describes an empirical, user-centred approach to explanation design. It reports three studies that investigate what patients want to know when they have been prescribed medication. The question is asked in the context of the development of a drug prescription system called OPADE. The system is aimed primarily at improving the prescribing behaviour of physicians, but will also produce written explanations for indirect users such as patients. In the first study, a large number of people were presented with a scenario about a visit to the doctor, and were asked to list the questions that they would like to ask the doctor about the prescription. On the basis of the results of the study, a categorization of question types was developed in terms of how frequently particular questions were asked. In the second and third studies a number of different explanations were generated in accordance with this categorization, and a new sample of people were presented with another scenario and were asked to rate the explanations on a number of dimensions. The results showed significant differences between the different explanations. People preferred explanations that included items corresponding to frequently asked questions in study 1. For an explanation to be considered useful, it had to include information about side effects, what the medication does, and any lifestyle changes involved. The implications of the results of the three studies are discussed in terms of the development of OPADE's explanation facility.

User interface standards for expert systems: are they appropriate?

In recent years there has been a growing debate over whether or not standards should be produced for user system interfaces. Those in favor of standardization argue that standards in this area will result in more usable systems, while those against argue that standardization is neither practical nor desirable. The present paper reviews both sides of this debate in relation to expert systems. It argues that in many areas guidelines are more appropriate than standards for user interface design.

Designing the temporal aspects of the user interface: Views from the coal face

We aim to support user interface designers in capturing, representing and reasoning about temporal information. We have developed a method to support user interface designers in considering how the temporal aspects of software impact the user. Importantly the method is based on a detailed analysis of data from a set of situated interviews that capture the views of practicing user interface designers. This paper discusses the background research and the motivation for the method.

A Framework supporting collaboration on the distributed design of integrated systems

The work described in this thesis aims to support the distributed design of integrated systems and considers specifically the need for collaborative interaction among designers. Particular emphasis was given to issues which were only marginally considered in previous approaches, such as the abstraction of the distribution of design automation resources over the network, the possibility of both synchronous and asynchronous interaction among designers and the support for extensible design data models. Such issues demand a rather complex software infrastructure, as possible solutions must encompass a wide range of software modules: from user interfaces to middleware to databases. To build such structure, several engineering techniques were employed and some original solutions were devised. The core of the proposed solution is based in the joint application of two homonymic technologies: CAD Frameworks and object-oriented frameworks. The former concept was coined in the late 80's within the electronic design automation community and comprehends a layered software environment which aims to support CAD tool developers, CAD administrators/integrators and designers. The latter, developed during the last decade by the software engineering community, is a software architecture model to build extensible and reusable object-oriented software subsystems. In this work, we proposed to create an object-oriented framework which includes extensible sets of design data primitives and design tool building blocks. Such object-oriented framework is included within a CAD Framework, where it plays important roles on typical CAD Framework services such as design data representation and management, versioning, user interfaces, design management and tool integration. The implemented CAD Framework - named Cave2 - followed the classical layered architecture presented by Barnes, Harrison, Newton and Spickelmier, but the possibilities granted by the use of the object-oriented framework foundations allowed a series of improvements which were not available in previous approaches: - object-oriented frameworks are extensible by design, thus this should be also true regarding the implemented sets of design data primitives and design tool building blocks. This means that both the design representation model and the software modules dealing with it can be upgraded or adapted to a particular design methodology, and that such extensions and adaptations will still inherit the architectural and functional aspects implemented in the object-oriented framework foundation; - the design semantics and the design visualization are both part of the object-oriented framework, but in clearly separated models. This allows for different visualization strategies for a given design data set, which gives collaborating parties the flexibility to choose individual visualization settings; - the control of the consistency between semantics and visualization - a particularly important issue in a design environment with multiple views of a single design - is also included in the foundations of the object-oriented framework. Such mechanism is generic enough to be also used by further extensions of the design data model, as it is based on the inversion of control between view and semantics. The view receives the user input and propagates such event to the semantic model, which evaluates if a state change is possible. If positive, it triggers the change of state of both semantics and view. Our approach took advantage of such inversion of control and included an layer between semantics and view to take into account the possibility of multi-view consistency; - to optimize the consistency control mechanism between views and semantics, we propose an event-based approach that captures each discrete interaction of a designer with his/her respective design views. The information about each interaction is encapsulated inside an event object, which may be propagated to the design semantics - and thus to other possible views - according to the consistency policy which is being used. Furthermore, the use of event pools allows for a late synchronization between view and semantics in case of unavailability of a network connection between them; - the use of proxy objects raised significantly the abstraction of the integration of design automation resources, as either remote or local tools and services are accessed through method calls in a local object. The connection to remote tools and services using a look-up protocol also abstracted completely the network location of such resources, allowing for resource addition and removal during runtime; - the implemented CAD Framework is completely based on Java technology, so it relies on the Java Virtual Machine as the layer which grants the independence between the CAD Framework and the operating system. All such improvements contributed to a higher abstraction on the distribution of design automation resources and also introduced a new paradigm for the remote interaction between designers. The resulting CAD Framework is able to support fine-grained collaboration based on events, so every single design update performed by a designer can be propagated to the rest of the design team regardless of their location in the distributed environment. This can increase the group awareness and allow a richer transfer of experiences among them, improving significantly the collaboration potential when compared to previously proposed file-based or record-based approaches. Three different case studies were conducted to validate the proposed approach, each one focusing one a subset of the contributions of this thesis. The first one uses the proxy-based resource distribution architecture to implement a prototyping platform using reconfigurable hardware modules. The second one extends the foundations of the implemented object-oriented framework to support interface-based design. Such extensions - design representation primitives and tool blocks - are used to implement a design entry tool named IBlaDe, which allows the collaborative creation of functional and structural models of integrated systems. The third case study regards the possibility of integration of multimedia metadata to the design data model. Such possibility is explored in the frame of an online educational and training platform.

Design de interfaces para aplicativo de smartphone como recurso auxiliar no acompanhamento clínico de pacientes fibromiálgicos

Este trabalho tem como objetivo o desenvolvimento de interfaces com o usuário para aplicativo móvel smartphones com intuito de contribuir para a eficiência das atividades de profissionais e pesquisadores da área de fisioterapia ao oferecer suporte ao acompanhamento clínico da dor no tratamento de pacientes fibromiálgicos. Utilizando a abordagem de Design Centrado no Usuário - DCU, foram realizadas entrevistas e uma investigação contextual para a identificação inicial dos problemas e necessidades dos usuários. Verificou-se que as atividades de monitoramento e acompanhamento das sessões do tratamento de pacientes fibromiálgicos são, tradicionalmente, realizadas por meio de manipulando de formulários e fichas em papel (registro das condições de saúde do paciente) e escalas de classificação da dor em formato impresso (apresentadas ao paciente para indicação de sua dor percebida para cada ponto pré-determinado do corpo). Os procedimentos envolvidos nestas atividades dificultam o gerenciamento do desempenho do tratamento, o que, segundo relatos, reflete no comprometimento dos pacientes na adesão e frequência as sessões. A partir da observação e do levantamento das necessidades desses profissionais diante de suas atividades, foi proposto um aplicativo para smartphone com a intenção de minimizar os problemas ocasionados pelo uso das ferramentas convencionais e de prover informações rápidas acerca dos dados coletados. Então, seguindo a abordagem do DCU foi elaborado um modelo conceitual durante a etapa de concepção de soluções, o qual guiou a criação dos protótipos. A avaliação das interfaces do protótipo foi realizada com o envolvimento dos usuários a partir da técnica de avaliação cooperativa. Seus resultados proporcionaram o refinamento das interfaces e o desenvolvimento de uma nova proposta do design das interfaces em protótipo de alta fidelidade, produzido para o ambiente Android. Assim, esse trabalho faz parte do processo de desenvolvimento de um produto de software personalizado com foco na concepção e avaliação das interfaces com o usuário. Por meio da metodologia aplicada, observaram-se indícios os quais sugerem que as interfaces propostas apresentaram-se como um recurso facilitador e capaz de contribuir para eficiência das atividades no acompanhamento do tratamento de pacientes fibromiálgicos

Online Shopping Websites: An Evaluation of User Experience and Interface Ergonomic Criteria from the Perspective of Older Users

This paper presents a user experience evaluation of two online shopping websites from the perspective of older users (those aged 50 and older). Two online shopping websites were evaluated using methodological procedures established in prior research [1]. The methodology consists of four steps: (1) heuristic interface evaluation using an ergonomic criteria checklist, (2) online identification and experience questionnaire, (3) evaluation of user experience and interface interaction, and (4) satisfaction questionnaire. Results of the study revealed the analyzed websites are not suitable for older users, who find it difficult to interact with these interfaces.

An integrated environment for filter design

Analog filters and direct digital filters are implemented using digital signal processing techniques. Specifically, Butterworth, Elliptic, and Chebyshev filters are implemented using the Motorola 56001 Digital Signal Processor by the integration of three software packages: MATLAB, C++, and Motorola's Application Development System. The integrated environment allows the novice user to design a filter automatically by specifying the filter order and critical frequencies, while permitting more experienced designers to take advantage of MATLAB's advanced design capabilities. This project bridges the gap between the theoretical results produced by MATLAB and the practicalities of implementing digital filters using the Motorola 56001 Digital Signal Processor. While these results are specific to the Motorola 56001 they may be extended to other digital signal processors. MATLAB handles the filter calculations, a C++ routine handles the conversion to assembly code, and the Motorola software compiles and transmits the code to the processor

Constructing a user experience user experience-based mobile learning environment

Mobile learning, in the past defined as learning with mobile devices, now refers to any type of learning-on-the-go or learning that takes advantage of mobile technologies. This new definition shifted its focus from the mobility of technology to the mobility of the learner (O'Malley and Stanton 2002; Sharples, Arnedillo-Sanchez et al. 2009). Placing emphasis on the mobile learner’s perspective requires studying “how the mobility of learners augmented by personal and public technology can contribute to the process of gaining new knowledge, skills, and experience” (Sharples, Arnedillo-Sanchez et al. 2009). The demands of an increasingly knowledge based society and the advances in mobile phone technology are combining to spur the growth of mobile learning. Around the world, mobile learning is predicted to be the future of online learning, and is slowly entering the mainstream education. However, for mobile learning to attain its full potential, it is essential to develop more advanced technologies that are tailored to the needs of this new learning environment. A research field that allows putting the development of such technologies onto a solid basis is user experience design, which addresses how to improve usability and therefore user acceptance of a system. Although there is no consensus definition of user experience, simply stated it focuses on how a person feels about using a product, system or service. It is generally agreed that user experience adds subjective attributes and social aspects to a space that has previously concerned itself mainly with ease-of-use. In addition, it can include users’ perceptions of usability and system efficiency. Recent advances in mobile and ubiquitous computing technologies further underline the importance of human-computer interaction and user experience (feelings, motivations, and values) with a system. Today, there are plenty of reports on the limitations of mobile technologies for learning (e.g., small screen size, slow connection), but there is a lack of research on user experience with mobile technologies. This dissertation will fill in this gap by a new approach in building a user experience-based mobile learning environment. The optimized user experience we suggest integrates three priorities, namely a) content, by improving the quality of delivered learning materials, b) the teaching and learning process, by enabling live and synchronous learning, and c) the learners themselves, by enabling a timely detection of their emotional state during mobile learning. In detail, the contributions of this thesis are as follows: • A video codec optimized for screencast videos which achieves an unprecedented compression rate while maintaining a very high video quality, and a novel UI layout for video lectures, which together enable truly mobile access to live lectures. • A new approach in HTTP-based multimedia delivery that exploits the characteristics of live lectures in a mobile context and enables a significantly improved user experience for mobile live lectures. • A non-invasive affective learning model based on multi-modal emotion detection with very high recognition rates, which enables real-time emotion detection and subsequent adaption of the learning environment on mobile devices. The technology resulting from the research presented in this thesis is in daily use at the School of Continuing Education of Shanghai Jiaotong University (SOCE), a blended-learning institution with 35.000 students.

User interface de aplicações móveis para museus : atenção partilhada

With the emergence and growing supply of mobile apps for museums it becomes relevant to study the importance of all the design aspects of those apps in order to provide users/visitors with a better museum experience. One of these aspects is User Interface (UI) which may condition the quality of the application experience as well as the museum experience, serving the function of intermediary. Since interface design must combine usability with appearance (Schlatter e Levinson, 2013) the design must always appeal to the user, representing also a potential source of distraction. Hence the concern of this dissertation is to understand how we can distribute the user's attention in a balanced way, between the application and the exhibition via the User Interface design. For better understanding of the issue – sharing the attention between the physical experience and the application - questions are addressed as: what represents a distraction during a visit to a museum and what comprises the attention process. Thus, it was possible to find some good and bad practice to design a good mobile UI which suits the visual criteria and does not require too much visitor’s attention, serving as a complement to the visit

Architectural design in object-z

We present a process for introducing an object-oriented architecture into an abstract functional specification written in Object-Z. Since the design is derived from the specification, correctness concerns are addressed as pan of the design process. We base our approach on refactoring rules that apply to class structure, and use the rules to implement design patterns. As a motivating example, we introduce a user-interface design that follows the model-view-controller paradigm into an existing specification.

A study of business user based information systems development, and modelling success factors

This thesis describes research into business user involvement in the information systems application building process. The main interest of this research is in establishing and testing techniques to quantify the relationships between identified success factors and the outcome effectiveness of 'business user development' (BUD). The availability of a mechanism to measure the levels of the success factors, and quantifiably relate them to outcome effectiveness, is important in that it provides an organisation with the capability to predict and monitor effects on BUD outcome effectiveness. This is particularly important in an era where BUD levels have risen dramatically, user centred information systems development benefits are recognised as significant, and awareness of the risks of uncontrolled BUD activity is becoming more widespread. This research targets the measurement and prediction of BUD success factors and implementation effectiveness for particular business users. A questionnaire instrument and analysis technique has been tested and developed which constitutes a tool for predicting and monitoring BUD outcome effectiveness, and is based on the BUDES (Business User Development Effectiveness and Scope) research model - which is introduced and described in this thesis. The questionnaire instrument is designed for completion by 'business users' - the target community being more explicitly defined as 'people who primarily have a business role within an organisation'. The instrument, named BUD ESP (Business User Development Effectiveness and Scope Predictor), can readily be used with survey participants, and has been shown to give meaningful and representative results.