Effect of building integrated photovoltaics on microclimate of urban canopy layer

Building integrated photovoltaics (BIPV) has potential of becoming the mainstream of renewable energy in the urban environment. BIPV has significant influence on the thermal performance of building envelope and changes radiation energy balance by adding or replacing conventional building elements in urban areas. PTEBU model was developed to evaluate the effect of photovoltaic (PV) system on the microclimate of urban canopy layer. PTEBU model consists of four sub-models: PV thermal model, PV electrical performance model, building energy consumption model, and urban canyon energy budget model. PTEBU model is forced with temperature, wind speed, and solar radiation above the roof level and incorporates detailed data of PV system and urban canyon in Tianjin, China. The simulation results show that PV roof and PV façade with ventilated air gap significantly change the building surface temperature and sensible heat flux density, but the air temperature of urban canyon with PV module varies little compared with the urban canyon of no PV. The PV module also changes the magnitude and pattern of diurnal variation of the storage heat flux and the net radiation for the urban canyon with PV increase slightly. The increase in the PV conversion efficiency not only improves the PV power output, but also reduces the urban canyon air temperature. © 2006.

Effect of urban climate on building integrated photovoltaics performance

It is generally recognized that BIPV (building integrated photovoltaics) has the potential to become a major source of renewable energy in the urban environment. The actual output of a PV module in the field is a function of orientation, total irradiance, spectral irradiance, wind speed, air temperature, soiling and various system-related losses. In urban areas, the attenuation of solar radiation due to air pollution is obvious, and the solar spectral content subsequently changes. The urban air temperature is higher than that in the surrounding countryside, and the wind speed in urban areas is usually less than that in rural areas. Three different models of PV power are used to investigate the effect of urban climate on PV performance. The results show that the dimming of solar radiation in the urban environment is the main reason for the decrease of PV module output using the climatic data of urban and rural sites in Mexico City for year 2003. The urban PV conversion efficiency is higher than that of the rural PV system because the PV module temperature in the urban areas is slightly lower than that in the rural areas in the case. The DC power output of PV seems to be underestimated if the spectral response of PV in the urban environment is not taken into account based on the urban hourly meteorological data of Sao Paulo for year 2004. © 2006 Elsevier Ltd. All rights reserved.

The social consequences of broken urban structures: a case study of Belfast

This article explores how the design and layout of the urban environment can have significant social impacts on working class communities whose access to employment and other necessary services depends largely on public transport and safe walk-able streets. It does so by considering a case study of Belfast. Although Belfast has a distinctive recent history as the site of political violence and territorial division, it also has a spatial configuration that emerged out of a modernising roads and redevelopment programme in the 1960s and 1970s. However, an understanding of contemporary Belfast, particularly its urban structure and form, requires n analysis of how the social impacts of such ubiquitous regional and urban planning practices were not addressed. The article argues that a culture of ‘politically safe’ bureaucratic inaction developed during the ‘war years’ has been sustained in the ‘new democracy’. In turn, this has had significant consequences for the functioning of the city. Major areas of derelict land around the city core together with the impediments created by regional road infrastructure have combined to create a doughnut city that, on the one hand, facilitates a commuting middle class, while on the other, discriminates against the poorest inner city communities. The article goes on to examine how an activist urban design group, known as the Forum for Alternative Belfast, has responded to these challenges. It focuses particularly on action-research undertaken during its 2010 Summer School which aimed to address issues of disconnection in inner North Belfast that affect some of the most territorialised and deprived communities in the city.

Urban Conflicts

Three sources of urban conflicts are identified: (1) changing state-city relationships; (2) the relationship between the dynamics of capitalist development and cities and (3) the specific dynamics of urban life and the urban environment where the city itself is seen as a causal variable. Two sets of questions cross-cut all three strands. The first addresses how violent conflicts can be regulated, transformed and rendered into more constructive non-violent conflicts through the processes of urban civil society. The second concerns how, why, and where urban conflicts turn violent and with what consequences. In summary cities now rival states as arenas and stakes in political conflict and urban conflicts have increasing transnational and transcultural salience which underlines the necessity for sustained comparative analyis

An approach to compatible new buildings in historic urban environments : case study in the Arabian Gulf region

Cette thèse contribue à l'état actuel des connaissances sur la compatibilité des nouveaux bâtiments avec les environnements urbains historiques. Elle suit un mode de présentation classique: Introduction, Revue de Littérature, Méthodologie, Résultats, Discussion et Conclusion. Le problème étudié est le manque d'orientation pour intégrer les processus de développement et de sauvegarde dans les contextes établis. La littérature récente révèle que les règles de préservation, aussi appelées normes et lignes directrices, ne peuvent pas garantir une relation compatible entre une intervention et son milieu. La pensée contemporaine dans le domaine de la conservation et de la gestion du patrimoine invite donc l’exploration d'autres moyens pour lier la nouvelle architecture à l'ancienne. Ainsi, le présent projet de recherche explore une approche alternative aux règles de préservation en vue d’atteindre le but de nouveaux bâtiments compatibles et d’améliorer la prise de décision fondée sur les valeurs. Pour produire des résultats spécifiques et convaincants, un cas a été sélectionné. Celui-ci est une ville dans la région du Golfe Arabe : la Ville de Koweït. Le résultat principal est le développement d’une approche, mise en œuvre en posant des questions approfondies sur le lieu, la conception et la construction des nouveaux bâtiments. Les questions suggérées dans la thèse mettent l’accent sur les valeurs patrimoniales et les choix de conception afin de permettre un changement réfléchi au sein des environnements urbains historiques. Elles aident aussi à évaluer les nouvelles propositions de projets au cas par cas. Pour démontrer comment cette approche pourrait être présentée et utilisée par les requérants et les évaluateurs, un modèle théorique est proposé. Ce modèle a ensuite été discuté avec des professionnels locaux et internationaux qui ont identifié ses forces et ses limites. En conclusion, l’ensemble des résultats montre que la mise à disposition de règles et / ou de questions approfondies n’est pas une solution satisfaisante puisqu’il y a d'autres enjeux importants qui devraient être abordés: comment appliquer l'orientation efficacement une fois qu’elle a été créée, comment développer la compétence liée à la prise de décision fondée sur les valeurs et comment insérer la conservation du patrimoine dans la mentalité du gouvernement local et des communautés. Lorsque ces enjeux seront traités, le patrimoine pourra devenir partie intégrante du processus de planification, ce qui est le but ultime. Enfin, cinq axes de recherche sont recommandés pour poursuivre l’exploration des idées introduites dans cette étude.

Perspectives of Urban Growth Management and Sustainable Development In West Bank, Hebron District as a case Study

The main objective of this PhD research study is to provide a perspective on the urban growth management and sustainable development in Palestine, and more specifically in Hebron district as a case study. Hebron is located 36 km south of Jerusalem, with an overall population size of around 600,000 people living in a total area around1246km2. Hebron is the biggest Palestinian district that has 16 municipalities and 154 localities. The research discusses and analyzes the urban planning system, economical and environmental policies and the solution required to manage and integrate the development elements to develop a sustainable development plan for Hebron. The research provides answers for fundamental questions such as what kind and definition of sustainable development are applicable to the Palestinian case?. What are the sustainability problems there and how the Israeli occupation and unstable political condition affect the sustainable development in Palestine? What are the urban growth management and sustainability policies and actions required from government, public and privets sector in Palestine? The fast urban growth in Palestine is facing many problems and challenges due to the increase in the population size and the resulting impact of this increase including, but not limited to, the demand of new houses, need for more infrastructure services, demands on new industrial, commercial, educational and health projects, which in turn reduces the area of agricultural lands and threatens the natural resources and environment. There are also other associated sustainability problems like the absence of effective plans or regulations that control urban expansion, the absence of sufficient sustainable development plans at the national levels for the district, new job requirements, Israeli restrictions and occupation for more than 60 years, existence of construction factories near residential areas, poor public awareness and poor governmental funds for service projects and development plans. The study consists of nine chapters. Chapter One includes an introduction, study objectives, problems and justifications, while Chapter Two has a theoretical background on sustainability topic and definitions of sustainability. The Palestinian urban planning laws and local government systems are discussed in Chapter Three and the methodology of research is detailed in Chapter Four. As for Chapter Five, it provides a general background on Hebron District including demographical and economical profiles, along with recommendations related to sustainable development for each profile Chapter Six addresses the urban environment, sustainability priorities and policies required. Chapter Seven discusses and analyzes infrastructure services including transportation, water and wastewater. As for Chapter Eight, it addresses the land use, housing and urban expansion beside the cultural heritage, natural heritage with relevant sustainable development polices and recommendations. Finally, Chapter Nine includes a conclusion and comprehensive recommendations integrating all of urban and sustainability event in one map. Hebron has a deep history including a rich cultural heritage aged by thousands of years, with 47% of Hebron district population under 14 years old. Being the biggest Palestinian district, Hebron has thousands of industrial and economical organizations beside a large agricultural sector at Palestine level. This gives Hebron a potential to play major roles in developing a national sustainability plan, as the current urban planning system in Palestine needs urgent reform and development to fulfill the sustainability requirement. The municipalities and ministers should find permanent financial aid for urban planning and development studies so as to face future challenges. The Palestinian government can benefit from available local human resources in development projects; hence Palestinian people have sufficient qualifications in most sectors. The Palestinian people also can invest in the privet sector in Palestine in case businessmen have been encouraged and clear investment laws and plans have been developed. The study provides recommendations associated to the sustainable development in Palestine in general and Hebron, as a case study, in specific. Recommendations include increasing the privet sector as well as the public involvement in urban growth management, and stopping unplanned urban expansion, subjecting granting building permits of new projects to the no-harm environmental impact assessment, increasing the coordination and cooperation between localities and central bodies, protection and renovation of old cites and green areas, increasing the quality and quantity of infrastructure services, establishing district urban planning department to coordinate and organize urban planning and sustainable development activities. Also, among recommendations come dividing Hebron into three planning and administrative areas (north, central and south), and dividing the sustainable development and implementation period (2010 to 2025) into three main phases. Finally, the study strongly recommends benefiting from the same urban development plans in similar districts at national and international levels, also to use new technologies and information systems in urban planning process.

Attitudes of landscape professionals towards naturalistic versus formal urban landscapes in the UK

The last 30 years have seen a tide of interest sweeping across Europe in the development of nature in cities, and an increasing amount of landscape development in urban areas has involved the use of 'naturalistic' styles. This is an increasing attempt to find ways for urbanism and nature to co-exist. However, there have been considerable discussions among professionals regarding the advantages and disadvantages of 'naturalistic' styles in urban areas. This research examines professional attitudes to 'naturalistic' landscape styles in Britain, in contrast to more traditional, formal landscape styles, and aims to find out whether the interest in natural landscapes is really a fashion among landscape professionals. A self-administered postal survey was carried out using both quantitative and qualitative data collection techniques and analysis. The survey included 500 professionals from parks and recreation departments of local authorities, private landscape practices and conservation trusts, and resulted in a satisfactory response rate of 53 %. The results of this study suggested that professionals recognise most of the values attached to naturalistic landscapes in urban areas. However, possible benefits that natural areas may have for urban people are not attached to naturalistic landscapes alone. The study also revealed that the naturalistic style is highly popular among conservation trusts but is less so among professionals from local authorities and private landscape practices who seem to appreciate both styles and believe that these styles are not separable from each other and should co-exist in an urban environment. (C) 2006 Elsevier B.V. All rights reserved.

Building cluster and shading in urban canyon for hot dry climate - Part 1: Air and surface temperature measurements

Under low latitude conditions, minimization of solar radiation within the urban environment may often be a desirable criterion in urban design. The dominance of the direct component of the global solar irradiance under clear high sun conditions requires that the street solar access must be small. It is well known that the size and proportion of open spaces has a great influence on the urban microclimate This paper is directed towards finding the interaction between urban canyon geometry and incident solar radiation. The effect of building height and street width on the shading of the street surfaces and ground for different orientations have been examined and evaluated. It is aimed to explore the extent to which these parameters affect the temperature in the street. This work is based on air and surface temperature measurements taken in different urban street canyons in EL-Oued City (hot and and climate), Algeria. In general, the results show that there are less air temperature variations compared to the surface temperature which really depends on the street geometry and sky view factor. In other words, there is a big correlation between the street geometry, sky view factor and surface temperatures.

Building cluster and shading in urban canyon for hot dry climate Part 2: Shading simulations

Under low latitude conditions, minimisation of solar irradiance within the urban environment may often be an important criterion in urban design. This can be achieved when the obstruction angle is large (high H/W ratio, H = height, W = width). Solar access to streets can always be decreased by increasing H/W to larger values. It is shown in this paper that the street canyon orientation (and not only the H/W ratio) has a considerable effect on solar shading and urban microclimate. The paper demonstrates through a series of shading simulation and temperature measurements that a number of useful relationships can be developed between the geometry and the microclimate of urban street canyons. These relationships are potentially helpful to assist in the formulation of urban design guidelines governing street dimensions and orientations for use by urban designers.

Retrieval of global atmospheric electrical activity at a polluted urban site

The atmospheric electrical Potential Gradient (PG) arises from global thunderstorm activity, but surface measurements of the atmospheric Potential Gradient (PG) are influenced by global thunderstorms and local aerosol concentration changes. The local aerosol change can be monitored independently, and in some cases the concentration changes are closely related to PG changes. For these circumstances, a general theory to remove the local aerosol influence on PG measurements has been developed. Continuous measurements of PG and aerosol mass concentration were made during 24–31 Dec, 2005 within an urban environment at Reading, UK. The average diurnal variation of PG showed a double diurnal cycle, with maxima in the early morning and evening hours. The aerosol concentration has similar double maxima. Removing the aerosol using from the PG and aerosol correlation returns a single diurnal cycle, suggestive of the more global PG diurnal cycle.

Sustainability in the built environment

This introductory chapter sets the scene for the book, providing an overview of sustainability in the built environment. With a bias towards buildings and the urban environment, it illustrates the range of issues that impinge upon global carbon reduction and the mechanisms available to help bring about change. Climate change, and its impact on built environment, is briefly introduced and sustainability in the built environment and associated factors are described. The specific topics relating to sustainable design and management of the built environment, including policy and assessment, planning, energy, water and waste, technology, supply and demand, occupants’ behaviour and management have been highlighted. This chapter emphasises the importance of a systemic approach in delivering a sustainable built environment.

Characterization of energy flux partitioning in urban environments: links with surface seasonal properties

A better understanding of links between the properties of the urban environment and the exchange to the atmosphere is central to a wide range of applications. The numerous measurements of surface energy balance data in urban areas enable intercomparison of observed fluxes from distinct environments. This study analyzes a large database in two new ways. First, instead of normalizing fluxes using net all-wave radiation only the incoming radiative fluxes are used, to remove the surface attributes from the denominator. Second, because data are now available year-round, indices are developed to characterize the fraction of the surface (built; vegetation) actively engaged in energy exchanges. These account for shading patterns within city streets and seasonal changes in vegetation phenology; their impact on the partitioning of the incoming radiation is analyzed. Data from 19 sites in North America, Europe, Africa, and Asia (including 6-yr-long observation campaigns) are used to derive generalized surface–flux relations. The midday-period outgoing radiative fraction decreases with an increasing total active surface index, the stored energy fraction increases with an active built index, and the latent heat fraction increases with an active vegetated index. Parameterizations of these energy exchange ratios as a function of the surface indices [i.e., the Flux Ratio–Active Index Surface Exchange (FRAISE) scheme] are developed. These are used to define four urban zones that characterize energy partitioning on the basis of their active surface indices. An independent evaluation of FRAISE, using three additional sites from the Basel Urban Boundary Layer Experiment (BUBBLE), yields accurate predictions of the midday flux partitioning at each location.

Multi-site evaluation of an urban land-surface model: intra-urban heterogeneity, seasonality and parameter complexity requirements

An extensive off-line evaluation of the Noah/Single Layer Urban Canopy Model (Noah/SLUCM) urban land-surface model is presented using data from 15 sites to assess (1) the ability of the scheme to reproduce the surface energy balance observed in a range of urban environments, including seasonal changes, and (2) the impact of increasing complexity of input parameter information. Model performance is found to be most dependent on representation of vegetated surface area cover; refinement of other parameter values leads to smaller improvements. Model biases in net all-wave radiation and trade-offs between turbulent heat fluxes are highlighted using an optimization algorithm. Here we use the Urban Zones to characterize Energy partitioning (UZE) as the basis to assign default SLUCM parameter values. A methodology (FRAISE) to assign sites (or areas) to one of these categories based on surface characteristics is evaluated. Using three urban sites from the Basel Urban Boundary Layer Experiment (BUBBLE) dataset, an independent evaluation of the model performance with the parameter values representative of each class is performed. The scheme copes well with both seasonal changes in the surface characteristics and intra-urban heterogeneities in energy flux partitioning, with RMSE performance comparable to similar state-of-the-art models for all fluxes, sites and seasons. The potential of the methodology for high-resolution atmospheric modelling application using the Weather Research and Forecasting (WRF) model is highlighted. This analysis supports the recommendations that (1) three classes are appropriate to characterize the urban environment, and (2) that the parameter values identified should be adopted as default values in WRF.