952 resultados para Three models
Resumo:
The decrease in crime is one of the core issues that cause concern in society today. This study aims to propose improvements to public safety from the choice of points to the location of police units, ie the points which support the car and the police. For this, three models were developed in order to assist decision making regarding the best placement of these bases. The Model of Police Units Routing has the intention to analyze the current configuration of a given region and develop optimal routes for round preventative. The Model of Allocation and Routing for New Police Units (MARNUP) used the model of facility location called p-median weighted and traveling salesman problem (TSP) combined aiming an ideal setting for regions that do not yet have support points or to assess how far the distribution is present in relation to that found in solution. The Model Redefinition and Routing Unit Police (MRRUP) seek to change the current positioning taking into account the budgetary constraints of the decision maker. To verify the applicability of these models we used data from 602 points to instances of police command that is responsible for the capital city of Natal. The city currently has 31 police units for 36 of these 19 districts and police have some assistance. This reality can lead to higher costs and higher response times for answering emergency calls. The results of the models showed that in an ideal situation it is possible to define a distance of 500 km/round, whereas in this 900 km are covered by approximately round. However, a change from three-point lead reduced to 700 km / round which represents a decrease of 22% in the route. This reduction should help improve response time to emergency care, improving the level of service provided by the increase of solved cases, reducing police shifts and routing preventive patrols
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Understanding the way in which large-scale structures, like galaxies, form remains one of the most challenging problems in cosmology today. The standard theory for the origin of these structures is that they grew by gravitational instability from small, perhaps quantum generated, °uctuations in the density of dark matter, baryons and photons over an uniform primordial Universe. After the recombination, the baryons began to fall into the pre-existing gravitational potential wells of the dark matter. In this dissertation a study is initially made of the primordial recombination era, the epoch of the formation of the neutral hydrogen atoms. Besides, we analyzed the evolution of the density contrast (of baryonic and dark matter), in clouds of dark matter with masses among 104M¯ ¡ 1010M¯. In particular, we take into account the several physical mechanisms that act in the baryonic component, during and after the recombination era. The analysis of the formation of these primordial objects was made in the context of three models of dark energy as background: Quintessence, ¤CDM(Cosmological Constant plus Cold Dark Matter) and Phantom. We show that the dark matter is the fundamental agent for the formation of the structures observed today. The dark energy has great importance at that epoch of its formation
Resumo:
OBJECTIVE: To detect factors associated with cardiovascular mortality in the elderly of Botucatu. METHODS: We evaluated 29 variables of interest in a cohort of patients aged ³60 using data from a survey conducted between 1983/84. The elderly cohort was analyzed in 1992 to detect the occurrence of cardiovascular deaths. Survival analysis was performed using the Kaplan-Meier method, the log-rank test, and Cox regression analysis. Three models were adapted for each group of variables, and a final model was chosen from those variables selected from each group. RESULTS: We identified predictor for cardiovascular death according to age for elderly males not supporting the family, not possessing a vehicle, and previous cardiovascular disease. In elderly females, the predictor variables were previous cardiovascular disease and diabetes mellitus. CONCLUSION: Socioeconomic indicators (family heading and vehicle ownerrship) may be added to well stabilished medical factors (diabete mellitus and hypertension to select target groups for programs intended to reduce deaths due to cardiovascular diseases in elderly people.
Resumo:
O experimento foi realizado com o objetivo de predizer a digestibilidade da matéria seca (MS) de rações para coelhos em crescimento mediante equações baseadas no conceito de entidade nutritiva ideal. Foram usados 100 coelhos do Grupo Genético Botucatu, com 42 dias de idade. Testaram-se 16 rações contendo alimentos volumosos (papel, sabugo de milho, bagaço de cana ou maravalha de pínus), mais milho, farelo de soja, óleo de soja, caulim e sal comum. Os volumosos foram incluídos em quatro níveis, para se obter 22, 28, 34 ou 40% de fibra em detergente neutro (FDN) e 16% de proteína bruta (PB). O experimento foi realizado em duas fases, em delineamento experimental de blocos ao acaso. Observou-se efeito linear positivo da FDN sobre o consumo de MS. As médias de digestibilidade da MS variaram entre 60,10 e 80,78%. Houve efeito linear negativo da FDN, bem como interação do teor de FDN × volumoso, sobre a digestibilidade aparente da MS. Ao contrário dos componentes fibrosos, a proteína bruta PB e o conteúdo celular comportaram-se como entidade nutritiva ideal. Para predizer a digestibilidade da MS, testaram-se três modelos e o melhor baseou-se no teor de conteúdo celular, com digestibilidade verdadeira fixada em 1; outro no teor de FDN, cuja digestibilidade foi predita mediante uma equação empírica; e o terceiro, na perda endógena de conteúdo celular, considerada proporcional ao consumo de MS. A principal dificuldade na formulação de modelos para predizer a digestibilidade aparente da MS em coelhos é estimar com precisão a digestibilidade da FDN e a perda endógena de conteúdo celular. É necessário avaliar em estudos futuros o uso de maiores níveis de fibra nas rações. Para rações com níveis de fibra situados na amplitude deste estudo, recomenda-se usar o modelo 3, que inclui, além da fibra em detergente neutro, a fibra em detergente ácido e a lignina.
Resumo:
The aim of this study was to perform a photoelastic analysis of stress distribution on straight and angulated implants with different crowns (screwed and cemented). Three models were made of photoelastic resin PL-2: model 1: external hexagon implant 3.75 x 10.00 mm at 0 degrees; model 2: external hexagon implant 3.75 x 10.00 mm at 17 degrees; model 3: external hexagon implant 3.75 x 10.00 mm at 30 degrees. Axial and oblique (45 degrees) load (100 N) was applied with a universal testing machine. The photoelastic fringes on the models were recorded with a digital camera and visualized in a graphic software for qualitative analysis. The axial loading generated the same pattern of stress distribution. The highest stresses were concentrated between medium and apical thirds. The oblique loading generated a similar pattern of stress distribution in the models with similar implant angulation; the highest stress was located on the cervical region opposite to implant angulation and on the apical third. It was concluded that the higher the implant angulation, the higher the stress value, independent of crown type. The screwed prostheses exhibited the highest stress concentration. The oblique load generated higher stress value and concentration than the axial load.
Resumo:
The aim of this study was to evaluate the stress distribution of platform switching implants using a photoelastic method. Three models were constructed of the photoelastic resin PL-2, with a single implant and a screw-retained implant-supported prosthesis. These models were Model A, platform 5.0 mm/abutment 4.1 mm; Model B, platform 4.1 mm/abutment 4.1 mm; and Model C, platform 5.00 mm/abutment 5.00 mm. Axial and oblique (45 degrees) loads of 100 N were applied using a Universal Testing Machine (EMIC DL 3000). Images were photographed with a digital camera and visualized with software (AdobePhotoshop) to facilitate the qualitative analysis. The highest stress concentrations were observed at the apical third of the 3 models. With the oblique load, the highest stress concentrations were located at the implant apex, opposite the load application. Stress concentrations decreased in the cervical region of Model A (platform switching), and Models A (platform switching) and C (conventional/wide-diameter) displayed similar stress magnitudes. Finally, Model B (conventional/regular diameter) displayed the highest stress concentrations of the models tested.
Resumo:
The aim of this study was to compare the stress distribution induced by posterior functional loads on conventional complete dentures and implant-retained overdentures with different attachment systems using a two-dimentional Finite Element Analysis (FEA-2D). Three models representative of edentulous mandible were constructed on AutoCAD software; Group A (control), a model of edentulous mandible supporting a complete denture; Group B, a model of edentulous mandible supporting an overdenture over two splinted implants connected with the bar-clip system; Group C, a model of edentuluos mandible supporting an overdenture over two unsplinted impants with the O-ring system. Evaluation was conducted on Ansys software, with a vertical force of 100 N applied on the mandibular left first molar. When the stress was evaluated in supporting tissues, groups B (51.0 MPa) and C (52.6 MPa) demonstrated higher stress values than group A (10.1 MPa). Within the limits of this study, it may be conclued that the use of an attachment system increased stress values; furthermore, the use of splinted implants associated with the bar-clip attachment system favoured a lower stress distribution over the supporting tissue than the unsplinted implants with an O-ring abutment to retain the manibular overdenture.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
O sorgo pode ser cultivado em áreas e situações ambientais secas e quentes, em que a produtividade de outros cereais é antieconômica. Quando a semeadura do sorgo é realizada de modo eficiente, os benefícios podem ser verificados em sua produtividade. O objetivo deste trabalho foi avaliar o comportamento da cultura do sorgo semeado sob três níveis de carga vertical impostas sobre as rodas compactadoras das semeadoras-adubadoras. O experimento foi conduzido na FAZU - Faculdades Associadas de Uberaba (MG), no delineamento em blocos ao acaso, no esquema de parcelas subdivididas, com três modelos de rodas compactadoras e três cargas verticais, com cinco repetições. Observou-se que não houve efeito dos tratamentos tipo de rodas compactadoras e cargas em relação aos dias para emergência, mas a regressão linear mostrou significância para carga vertical. A altura, o teor médio de água das plantas e a produção de matéria verde e seca do sorgo não diferiram entre os tratamentos.
Resumo:
Uma semeadura bem realizada é fundamental para o sucesso de implantação de uma cultura e as rodas compactadoras utilizadas nessa operação devem ser capazes de melhorar o contato solo-semente para promover boa emergência das plântulas. Com o presente trabalho teve-se por objetivo estudar a influência de três modelos de rodas compactadoras submetidas a diferentes níveis de carga vertical, sobre parâmetros físicos do solo, em uma pista de ensaios projetada para essa finalidade. O trabalho foi desenvolvido no município de Uberaba, MG, em LATOSSOLO Vermelho distrófico, textura média, preparado com enxada rotativa. O delineamento experimental utilizado foi o de blocos ao acaso, com 3 tratamentos e quatro repetições. Os modelos de rodas 1 e 2 apresentaram melhores coeficientes de correlação para as equações obtidas nos diagramas pressão-deformação do que a equação obtida com a roda 3.
Resumo:
Assim como outras culturas de origem tropical, o milho exige durante o seu ciclo vegetativo, calor e umidade para se desenvolver, e as condições de instalação da cultura podem definir uma boa ou má produção. O objetivo deste trabalho foi avaliar a influência de cargas verticais sobre rodas compactadoras no ciclo da cultura do milho. Este trabalho foi conduzido nas Faculdades Associadas de Uberaba - FAZU, no município de Uberaba (MG), e instalado no delineamento em blocos ao acaso com três modelos de rodas compactadoras e três cargas verticais com duas repetições, na Pista de Ensaios de Semeadura, constituída de canais de solo. Observou-se que o número de dias para emergência, altura de plantas, número de folhas e a produção não foram afetados significativamente para os tratamentos estudados.
Resumo:
As rodas compactadoras das semadoras-adubadoras têm como principal função, propiciar o bom contato entre o solo e a semente para garantir a germinação das sementes e a emergência das plântulas. Objetivou-se, neste trabalho, estudar a influência de três modelos de rodas compactadoras, três profundidades de semeadura e três níveis de carga sobre a roda compactadora sob a temperatura e o teor de água do solo. O trabalho foi desenvolvido na pista de ensaios de semeadura, localiza em Uberaba, MG, em Latossolo Vermelho distrófico, utilizando-se o delineamento experimental de parcelas sub-subdivididas, com 27 tratamentos e quatro repetições. As rodas com maior área de contato com o solo proporcionaram maiores valores do teor médio de água e da temperatura do solo. O nível de carga sobre a roda compactadora não afetou a temperatura e o teor de água do solo.
Resumo:
Conduziu-se este trabalho, com o objetivo de avaliar três modelos de rodas compactadoras de semeadoras, dois níveis de carga vertical sobre as mesmas e duas lâminas de irrigação durante os períodos de pré e pós-emergência das plântulas de milho. O ensaio foi conduzido na UNESP de Jaboticabal, com o delineamento inteiramente casualizado (DIC) no esquema fatorial 3x2x2, combinando de três modelos de rodas compactadoras (roda lisa com estria, roda lisa com nervura e roda duplo angulada), com dois níveis de carga (162 N e 260 N) e dois teores de água (15 e 19,5 mm dia-¹) sob três repetições. Os parâmetros analisados foram: produtividade, número de grãos por espiga, massa de 100 grãos, matéria seca de plantas, número de dias para emergência, altura das plantas, diâmetro dos colmos das plantas e altura de inserção da primeira espiga. A variável diâmetro do colmo obteve melhor resultado sob a influência de maior lâmina de água, diferente da variável matéria seca de plantas. A inserção da primeira espiga foi afetada pela carga utilizada sobre a roda compactadora durante a semeadura. Quanto maior a carga utilizada, menor é a altura da inserção da primeira espiga. A interação roda x lâmina foi significativa para a variável número de grão.
Resumo:
This paper presents a methodology and a tool for projects involving analogue and digital signals. A sub-systems group was developed to translation a Matlab/Simulink model in the correspondent structural model described in VHDL-AMS. The developed translation tool, named of MS(2)SV, can reads a file containing a Simulink model translating it in the correspondent VHDL-AMS structural code. The tool also creates the directories structure and necessary files to simulate the model translated in System Vision environment. Three models of D/A converters available commercially that use R-2R ladder network were studied. This work considers some of challenges set by the electronic industry for the further development of simulation methodologies and tools in the field of mixed-signal technology. Although the objective of the studies has been the D/A converter, the developed methodology has potentiality to be extended to consider control systems and mechatronic systems.