Streaming Support for Data Intensive Cloud-Based Sequence Analysis

Cloud computing provides a promising solution to the genomics data deluge problem resulting from the advent of next-generation sequencing (NGS) technology. Based on the concepts of “resources-on-demand” and “pay-as-you-go”, scientists with no or limited infrastructure can have access to scalable and cost-effective computational resources. However, the large size of NGS data causes a significant data transfer latency from the client’s site to the cloud, which presents a bottleneck for using cloud computing services. In this paper, we provide a streaming-based scheme to overcome this problem, where the NGS data is processed while being transferred to the cloud. Our scheme targets the wide class of NGS data analysis tasks, where the NGS sequences can be processed independently from one another. We also provide the elastream package that supports the use of this scheme with individual analysis programs or with workflow systems. Experiments presented in this paper show that our solution mitigates the effect of data transfer latency and saves both time and cost of computation.

WiMAX,Technology and Market.

Wireless communication is the transfer of information from one place to another without using wires. From the earliest times, humans have felt the need to develop techniques of remote communication. From this need arose the smoke signals, communication by sun reflection in mirrors and so on. But today the telecommunications electronic devices such as telephone, television, radio or computer. Radio and television are used for one-way communication. Telephone and computer are used for two-way communication. In wireless networks there is almost unlimited mobility, we can access the network almost anywhere or anytime. In wired networks we have the restriction of using the services in fixed area services. The demand of the wireless is increasing very fast; everybody wants broadband services anywhere anytime. WiMAX (Worldwide Interoperability for Microwave Access) is a broadband wireless technology based on IEEE 802.16-2004 and IEEE 802.16e-2005 that appears to solve this demand. WIMAX is a system that allows wireless data transmission in areas of up to 48 km of radius. It is designed as a wireless alternative to ADSL and a way to connect nodes in wireless metropolitan areas network. Unlike wireless systems that are limited in most cases, about 100 meter, providing greater coverage and more bandwidth. WIMAX promises to achieve high data transmission rates over large areas with a great amount of users. This alternative to the networks of broadband access common as DSL o Wi-Fi, can give broadband access to places quickly to rural areas and developing areas around the world. This paper is a study of WIMAX technology and market situation. First, the paper is responsible for explaining the technical aspects of WIMAX. For this gives an overview of WIMAX standards, physical layer, MAC layer and WiMAX, Technology and Market Beijing University of Post and Telecommunications 2 WIMAX network architecture. Second, the paper address the issue of market in which provides an overview of development and deployment of WIMAX to end the future development trend of WIMAX is addressed. RESUMEN: Por comunicaciones inalámbricas se entiende la transferencia de información desde un lugar a otro sin la necesidad de un soporte físico como es por ejemplo el cable. Por lo que remontándose a los principios de la existencia del ser humano, nos damos cuenta de que el ser humano siempre ha sentido la necesidad de desarrollar técnicas para lograr comunicarse a distancia con sus semejantes. De dicha necesidad, surgieron técnicas tan ancestrales como puede ser la comunicación mediante señales de humo o por reflexión de los rayos solares en espejos entre otras. La curiosidad del ser humano y la necesidad de comunicarse a distancia fue la que llevó a Alexander Graham Bell a inventar el teléfono en 1876. La aparición de un dispositivo que permitía comunicarse a distancia permitiendo escuchar la voz de aquella persona con la que se quería hablar, supuso una revolución no solo en el panorama tecnológico, si no también en el panorama social. Pues a parte de permitir comunicaciones a larga distancia, solventó el problema de la comunicación en “tiempo real”. A raíz de este invento, la tecnología en materia de comunicación ha ido avanzando significativamente, más concretamente en lo referido a las comunicaciones inalámbricas. En 1973 se realizó la primera llamada desde un terminal móvil aunque no fue hasta 1983 cuando se empezó a comercializar dicho terminal, lo que supuso un cambio de hábitos y costumbres para la sociedad. Desde la aparición del primer móvil el crecimiento del mercado ha sido exponencial, lo que ha repercutido en una demanda impensable de nuevas aplicaciones integradas en dichos dispositivos móviles que satisfagan las necesidades que día a día autogenera la sociedad. Tras conseguir realizar llamadas a larga distancia de forma inalámbrica, el siguiente paso fue la creación de los SMS (Short Message System) lo que supuso una nueva revolución además de abaratar costes al usuario a la hora de comunicarse. Pero el gran reto para la industria de las comunicaciones móviles surgió con la aparición de internet. Todo el mundo sentía la necesidad de poder conectarse a esa gran base de datos que es internet en cualquier parte y en cualquier momento. Las primeras conexiones a internet desde dispositivos móviles se realizaron a través de la tecnología WAP (Wireless Application Protocol) hasta la aparición de la tecnología GPRS que permitía la conexión mediante protocolo TCP/IP. A partir de estas conexiones han surgido otras tecnologías, como EDGE, HSDPA, etc., que permitían y permiten la conexión a internet desde dispositivos móviles. Hoy en día la demanda de servicios de red inalámbrica crece de forma rápida y exponencial, todo el mundo quiere servicios de banda ancha en cualquier lugar y en cualquier momento. En este documento se analiza la tecnología WiMAX ( Worldwide Interoperability for Microwave Access) que es una tecnología de banda ancha basada en el estándar IEEE 802.16 creada para brindar servicios a la demanda emergente en la banda ancha desde un punto de vista tecnológico, donde se da una visión de la parte técnica de la tecnología; y desde el punto de vista del mercado, donde se analiza el despliegue y desarrollo de la tecnología desde el punto de vista de negocio. WiMAX es una tecnología que permite la transmisión inalámbrica de datos en áreas de hasta 48Km de radio y que está diseñada como alternativa inalámbrica para ADSL y para conectar nodos de red inalámbrica en áreas metropolitanas. A diferencia de los sistemas inalámbricos existentes que están limitados en su mayoría a unos cientos de metros, WiMAX ofrece una mayor cobertura y un mayor ancho de banda que permita dar soporte a nuevas aplicaciones, además de alcanzar altas tasas de transmisión de datos en grandes áreas con una gran cantidad de usuarios. Se trata de una alternativa a las redes de acceso de banda ancha como DSL o Wi-Fi, que puede dar acceso de banda ancha a lugares tales como zonas rurales o zonas en vías de desarrollo por todo el mundo con rapidez. Existen dos tecnologías de WiMAX, WiMAX fijo (basado en el estándar IEEE 802.16d-2004) y WiMAX móvil (basado en el estándar IEEE 802.16e-2005). La tecnología fija está diseñada para comunicaciones punto a multipunto, mientras que la fija lo está para comunicaciones multipunto a multipunto. WiMAX móvil se basa en la tecnología OFDM que ofrece ventajas en términos de latencia, eficiencia en el uso del espectro y soporte avanzado para antenas. La modulación OFDM es muy robusta frente al multitrayecto, que es muy habitual en los canales de radiodifusión, frente al desvanecimiento debido a las condiciones meteorológicas y frente a las interferencias de RF. Una vez creada la tecnología WiMAX, poseedora de las características idóneas para solventar la demanda del mercado, ha de darse el siguiente paso, hay que convencer a la industria de las telecomunicaciones de que dicha tecnología realmente es la solución para que apoyen su implantación en el mercado de la banda ancha para las redes inalámbricas. Es aquí donde entra en juego el estudio del mercado que se realiza en este documento. WiMAX se enfrenta a un mercado exigente en el que a parte de tener que dar soporte a la demanda técnica, ha de ofrecer una rentabilidad económica a la industria de las comunicaciones móviles y más concretamente a las operadoras móviles que son quienes dentro del sector de las telecomunicaciones finalmente han de confiar en la tecnología para dar soporte a sus usuarios ya que estos al fin y al cabo lo único que quieren es que su dispositivo móvil satisfaga sus necesidades independientemente de la tecnología que utilicen para tener acceso a la red inalámbrica de banda ancha. Quizás el mayor problema al que se ha enfrentado WiMAX haya sido la situación económica en la que se encuentra el mundo. WiMAX a comenzado su andadura en uno de los peores momentos, pero aun así se presenta como una tecnología capaz de ayudar al mundo a salir hacia delante en estos tiempos tan duros. Finalmente se analiza uno de los debates existentes hoy en día en el sector de las comunicaciones móviles, WiMAX vs. LTE. Como se puede observar en el documento realmente una tecnología no saldrá victoriosa frente a la otra, si no que ambas tecnologías podrán coexistir y trabajar de forma conjunta.

Estudio de la tecnología de identificación por radiofrecuencia, desarrollo y aplicaciones, seguridad, amenazas y mal uso

Resumen Ejecutivo Desde hace unos años, la tecnología RFID parece estar tecnológicamente madura, aunque se halla inmersa en una continua evolución y mejora de sus prestaciones frente a la tecnología basada en el código de barras. Esta tecnología está empezando a aumentar su comercialización y uso generalizado. Este proyecto describe su funcionamiento y arquitectura, las aplicaciones e implementaciones reales en diversos sectores empresariales y soluciones o propuestas para mejorar y fomentar investigaciones, desarrollos e implementaciones futuras. Una primera parte consiste en el desarrollo teórico del funcionamiento, parámetros físicos y la arquitectura RFID. En la segunda parte se estudian las aplicaciones potenciales, beneficios e inconvenientes y varios puntos de vista; empresas que invierten a favor de RFID y han realizado implementaciones reales exitosas y organizaciones en contra. La tercera y última parte analiza las consecuencias negativas que supone un mal uso de la tecnología como la pérdida de privacidad o confidencialidad, se proponen algunas medidas de seguridad y soluciones al problema utilizando la regularización y estandarización. Finalmente, tras estudiar la tecnología RFID, se aportan algunas conclusiones de carácter actual y de futuro después de observar resultados de expectativas previstas. Executive Summary For several years, RFID technology seems to be technologically mature, but is immersed in a continuous evolution and improvement of their performance than the technology based on the barcode. This technology is starting to increase their marketing and widespread use. This project describes its operation and architecture, applications and real implementations in different business sectors and solutions or proposals to improve and enhance research, development and future implementations. The first part consists of theory development of the operation, physical parameters and architecture RFID. The second part focuses on the potential applications, benefits and drawbacks and several points of view; companies investing on behalf of RFID and have made successful actual deployments and organizations against. The third and last part discusses the negative impact that is a bad use of technology such as loss of privacy or confidentiality; suggest some security measures and solutions to the problem using regularization and standardization. Finally, it provides some conclusions of the current character, after studying RFID technology and the future after observing results of expectations.

Towards cost reduction in concentrating solar power: innovative design for an efficient fresnel based solar field

Energía termosolar (de concentración) es uno de los nombres que hacen referencia en español al término inglés “concentrating solar power”. Se trata de una tecnología basada en la captura de la potencia térmica de la radiación solar, de forma que permita alcanzar temperaturas capaces de alimentar un ciclo termodinámico convencional (o avanzado); el futuro de esta tecnología depende principalmente de su capacidad para concentrar la radiación solar de manera eficiente y económica. La presente tesis está orientada hacia la resolución de ciertos problemas importantes relacionados con este objetivo. La mencionada necesidad de reducir costes en la concentración de radiación solar directa, asegurando el objetivo termodinámico de calentar un fluido hasta una determinada temperatura, es de vital importancia. Los colectores lineales Fresnel han sido identificados en la literatura científica como una tecnología con gran potencial para alcanzar esta reducción de costes. Dicha tecnología ha sido seleccionada por numerosas razones, entre las que destacan su gran libertad de diseño y su actual estado inmaduro. Con el objetivo de responder a este desafío se desarrollado un detallado estudio de las propiedades ópticas de los colectores lineales Fresnel, para lo cual se han utilizado métodos analíticos y numéricos de manera combinada. En primer lugar, se han usado unos modelos para la predicción de la localización y la irradiación normal directa del sol junto a unas relaciones analíticas desarrolladas para estudiar el efecto de múltiples variables de diseño en la energía incidente sobre los espejos. Del mismo modo, se han obtenido analíticamente los errores debidos al llamado “off-axis aberration”, a la apertura de los rayos reflejados en los espejos y a las sombras y bloqueos entre espejos. Esto ha permitido la comparación de diferentes formas de espejo –planos, circulares o parabólicos–, así como el diseño preliminar de la localización y anchura de los espejos y receptor sin necesidad de costosos métodos numéricos. En segundo lugar, se ha desarrollado un modelo de trazado de rayos de Monte Carlo con el objetivo de comprobar la validez del estudio analítico, pero sobre todo porque este no es preciso en el estudio de la reflexión en espejos. El código desarrollado está específicamente ideado para colectores lineales Fresnel, lo que ha permitido la reducción del tiempo de cálculo en varios órdenes de magnitud en comparación con un programa comercial más general. Esto justifica el desarrollo de un nuevo código en lugar de la compra de una licencia de otro programa. El modelo ha sido usado primeramente para comparar la intensidad de flujo térmico y rendimiento de colectores Fresnel, con y sin reflector secundario, con los colectores cilíndrico parabólicos. Finalmente, la conjunción de los resultados obtenidos en el estudio analítico con el programa numérico ha sido usada para optimizar el campo solar para diferentes orientaciones –Norte-Sur y Este-Oeste–, diferentes localizaciones –Almería y Aswan–, diferentes inclinaciones hacia el Trópico –desde 0 deg hasta 32 deg– y diferentes mínimos de intensidad del flujo en el centro del receptor –10 kW/m2 y 25 kW/m2–. La presente tesis ha conducido a importantes descubrimientos que deben ser considerados a la hora de diseñar un campo solar Fresnel. En primer lugar, los espejos utilizados no deben ser plano, sino cilíndricos o parabólicos, ya que los espejos curvos implican mayores concentraciones y rendimiento. Por otro lado, se ha llegado a la conclusión de que la orientación Este-Oeste es más propicia para localizaciones con altas latitudes, como Almería, mientras que en zonas más cercanas a los trópicos como Aswan los campos Norte-Sur conducen a mayores rendimientos. Es de destacar que la orientación Este-Oeste requiere aproximadamente la mitad de espejos que los campos Norte-Sur, puediendo estar inclinados hacia los Trópicos para mejorar el rendimiento, y que alcanzan parecidos valores de intensidad térmica en el receptor todos los días a mediodía. Sin embargo, los campos con orientación Norte-Sur permiten un flujo más constante a lo largo de un día. Por último, ha sido demostrado que el uso de diseños pre-optimizados analíticamente, con anchura de espejos y espaciado entre espejos variables a lo ancho del campo, pueden implicar aumentos de la energía generada por metro cuadrado de espejos de hasta el 6%. El rendimiento óptico anual de los colectores cilíndrico parabólicos es 23 % mayor que el rendimiento de los campos Fresnel en Almería, mientras que la diferencia es de solo 9 % en Aswan. Ello implica que, para alcanzar el mismo precio de electricidad que la tecnología de referencia, la reducción de costes de instalación por metro cuadrado de espejo debe estar entre el 10 % y el 25 %, y que los colectores lineales Fresnel tienen más posibilidades de ser desarrollados en zonas de bajas latitudes. Como consecuencia de los estudios desarrollados en esta tesis se ha patentado un sistema de almacenamiento que tiene en cuenta la variación del flujo térmico en el receptor a lo largo del día, especialmente para campos con orientación Este-Oeste. Este invento permitiría el aprovechamiento de la energía incidente durante más parte del año, aumentando de manera apreciable los rendimientos óptico y térmico. Abstract Concentrating solar power is the common name of a technology based on capturing the thermal power of solar radiation, in a suitable way to reach temperatures able to activate a conventional (or advanced) thermodynamic cycle to generate electricity; this quest mainly depends on our ability to concentrate solar radiation in a cheap and efficient way. The present thesis is focused to highlight and help solving some of the important issues related to this problem. The need of reducing costs in concentrating the direct solar radiation, but without jeopardizing the thermodynamic objective of heating a fluid up to the required temperature, is of prime importance. Linear Fresnel collectors have been identified in the scientific literature as a technology with high potential to reach this cost reduction. This technology has been selected because of a number of reasons, particularly the degrees of freedom of this type of concentrating configuration and its current immature state. In order to respond to this challenge, a very detailed exercise has been carried out on the optical properties of linear Fresnel collectors. This has been done combining analytic and numerical methods. First, the effect of the design variables on the ratio of energy impinging onto the reflecting surface has been studied using analytically developed equations, together with models that predict the location and direct normal irradiance of the sun at any moment. Similarly, errors due to off-axis aberration, to the aperture of the reflected energy beam and to shading and blocking effects have been obtained analytically. This has allowed the comparison of different shapes of mirrors –flat, cylindrical or parabolic–, as well as a preliminary optimization of the location and width of mirrors and receiver with no need of time-consuming numerical models. Second, in order to prove the validity of the analytic results, but also due to the fact that the study of the reflection process is not precise enough when using analytic equations, a Monte Carlo Ray Trace model has been developed. The developed code is designed specifically for linear Fresnel collectors, which has reduced the computing time by several orders of magnitude compared to a wider commercial software. This justifies the development of the new code. The model has been first used to compare radiation flux intensities and efficiencies of linear Fresnel collectors, both multitube receiver and secondary reflector receiver technologies, with parabolic trough collectors. Finally, the results obtained in the analytic study together with the numeric model have used in order to optimize the solar field for different orientations –North-South and East-West–, different locations –Almería and Aswan–, different tilts of the field towards the Tropic –from 0 deg to 32 deg– and different flux intensity minimum requirements –10 kW/m2 and 25 kW/m2. This thesis work has led to several important findings that should be considered in the design of Fresnel solar fields. First, flat mirrors should not be used in any case, as cylindrical and parabolic mirrors lead to higher flux intensities and efficiencies. Second, it has been concluded that, in locations relatively far from the Tropics such as Almería, East-West embodiments are more efficient, while in Aswan North- South orientation leads to a higher annual efficiency. It must be noted that East-West oriented solar fields require approximately half the number of mirrors than NS oriented fields, can be tilted towards the Equator in order to increase the efficiency and attain similar values of flux intensity at the receiver every day at midday. On the other hand, in NS embodiments the flux intensity is more even during each single day. Finally, it has been proved that the use of analytic designs with variable shift between mirrors and variable width of mirrors across the field can lead to improvements in the electricity generated per reflecting surface square meter up to 6%. The annual optical efficiency of parabolic troughs has been found to be 23% higher than the efficiency of Fresnel fields in Almería, but it is only around 9% higher in Aswan. This implies that, in order to attain the same levelized cost of electricity than parabolic troughs, the required reduction of installation costs per mirror square meter is in the range of 10-25%. Also, it is concluded that linear Fresnel collectors are more suitable for low latitude areas. As a consequence of the studies carried out in this thesis, an innovative storage system has been patented. This system takes into account the variation of the flux intensity along the day, especially for East-West oriented solar fields. As a result, the invention would allow to exploit the impinging radiation along longer time every day, increasing appreciably the optical and thermal efficiencies.

ANÁLISE DAS MUDANÇAS DOS FATORES DETERMINANTES DA ESTRUTURA DE CAPITAL EM FUNÇÃO DO CICLO DE VIDA DAS EMPRESAS BRASILEIRAS

As várias teorias acerca da estrutura de capital despertam interesse motivando diversos estudos sobre o assunto sem, no entanto, ter um consenso. Outro tema aparentemente pouco explorado refere-se ao ciclo de vida das empresas e como ele pode influenciar a estrutura de capital. Este estudo teve como objetivo verificar quais determinantes possuem maior relevância no endividamento das empresas e se estes determinantes alteram-se dependendo do ciclo de vida da empresa apoiada pelas teorias Trade Off, Pecking Order e Teoria da Agência. Para alcançar o objetivo deste trabalho foi utilizado análise em painel de efeito fixo sendo a amostra composta por empresas brasileiras de capital aberto, com dados secundários disponíveis na Economática® no período de 2005 a 2013, utilizando-se os setores da BM&FBOVESPA. Como resultado principal destaca-se o mesmo comportamento entre a amostra geral, alto e baixo crescimento pelo endividamento contábil para o determinante Lucratividade apresentando uma relação negativa, e para os determinantes Oportunidade de Crescimento e Tamanho, estes com uma relação positiva. Para os grupos de alto e baixo crescimento alguns determinantes apresentaram resultados diferentes, como a singularidade que resultou significância nestes dois grupos, sendo positiva no baixo crescimento e negativa no alto crescimento, para o valor colateral dos ativos e benefício fiscal não dívida apresentaram significância apenas no grupo de baixo crescimento. Para o endividamento a valor de mercado foi observado significância para o Benefício fiscal não dívida e Singularidade. Este resultado reforça o argumento de que o ciclo de vida influência a estrutura de capital.

Foundations of quantum technology

Recent progress in fabrication and control of single quantum systems presage a nascent technology based on quantum principles. We review these principles in the context of specific examples including: quantum dots, quantum electromechanical systems, quantum communication and quantum computation.

ANÁLISE DAS MUDANÇAS DOS FATORES DETERMINANTES DA ESTRUTURA DE CAPITAL EM FUNÇÃO DO CICLO DE VIDA DAS EMPRESAS BRASILEIRAS SÃO BERNARDO DO CAMPO

As várias teorias acerca da estrutura de capital despertam interesse motivando diversos estudos sobre o assunto sem, no entanto, ter um consenso. Outro tema aparentemente pouco explorado refere-se ao ciclo de vida das empresas e como ele pode influenciar a estrutura de capital. Este estudo teve como objetivo verificar quais determinantes possuem maior relevância no endividamento das empresas e se estes determinantes alteram-se dependendo do ciclo de vida da empresa apoiada pelas teorias Trade Off, Pecking Order e Teoria da Agência. Para alcançar o objetivo deste trabalho foi utilizado análise em painel de efeito fixo sendo a amostra composta por empresas brasileiras de capital aberto, com dados secundários disponíveis na Economática® no período de 2005 a 2013, utilizando-se os setores da BM&FBOVESPA. Como resultado principal destaca-se o mesmo comportamento entre a amostra geral, alto e baixo crescimento pelo endividamento contábil para o determinante Lucratividade apresentando uma relação negativa, e para os determinantes Oportunidade de Crescimento e Tamanho, estes com uma relação positiva. Para os grupos de alto e baixo crescimento alguns determinantes apresentaram resultados diferentes, como a singularidade que resultou significância nestes dois grupos, sendo positiva no baixo crescimento e negativa no alto crescimento, para o valor colateral dos ativos e benefício fiscal não dívida apresentaram significância apenas no grupo de baixo crescimento. Para o endividamento a valor de mercado foi observado significância para o Benefício fiscal não dívida e Singularidade. Este resultado reforça o argumento de que o ciclo de vida influência a estrutura de capital

Knowledge management in a New Zealand tree farming company:Ambiguity and resistance to the "technology solution"

Purpose - Managers at the company attempt to implement a knowledge management information system in an attempt to avoid loss of expertise while improving control and efficiency. The paper seeks to explore the implications of the technological solution to employees within the company. Design/methodology/approach - The paper reports qualitative research conducted in a single organization. Evidence is presented in the form of interview extracts. Findings - The case section of the paper presents the accounts of organizational participants. The accounts reveal the workers' reactions to the technology-based system and something of their strategies of resistance to the system. These accounts also provide glimpses of the identity construction engaged in by these knowledge workers. The setting for the research is in a knowledge-intensive primary industry. Research was conducted through observation and interviews. Research limitations/implications - The issues identified are explored in a single case-study setting. Future research could look at the relevance of the findings to other settings. Practical implications - The case evidence presented indicates some of the complexity of implementation of information systems in organizations. This could certainly be seen as more evidence of the uncertainty associated with organizational change and of the need for managers not to expect an easy adoption of intrusive IT solutions. Originality/value - This paper adds empirical insight to a largely conceptual literature. © Emerald Group Publishing Limited.

Knowledge management systems:finding a way with technology

Purpose - To consider the role of technology in knowledge management in organizations, both actual and desired. Design/methodology/approach - Facilitated, computer-supported group workshops were conducted with 78 people from ten different organizations. The objective of each workshop was to review the current state of knowledge management in that organization and develop an action plan for the future. Findings - Only three organizations had adopted a strongly technology-based "solution" to knowledge management problems, and these followed three substantially different routes. There was a clear emphasis on the use of general information technology tools to support knowledge management activities, rather than the use of tools specific to knowledge management. Research limitations/implications - Further research is needed to help organizations make best use of generally available software such as intranets and e-mail for knowledge management. Many issues, especially human, relate to the implementation of any technology. Participation was restricted to organizations that wished to produce an action plan for knowledge management. The findings may therefore represent only "average" organizations, not the very best practice. Practical implications - Each organization must resolve four tensions: Between the quantity and quality of information/knowledge, between centralized and decentralized organization, between head office and organizational knowledge, and between "push" and "pull" processes. Originality/value - Although it is the group rather than an individual that determines what counts as knowledge, hardly any previous studies of knowledge management have collected data in a group context.

Servitization capabilities for advanced services:a multi-actor perspective

Servitization is the process by which manufacturers add services to their product offerings and even replace products with services. The capabilities necessary to develop and deliver advanced services as part of servitization are often discussed in the literature from the manufacturer’s perspective, e.g., having a service-focused culture or the ability to sell solutions. Recent research has acknowledged the important role of customers and, to a lesser extent, other actors (e.g., intermediaries) in bringing about successful servitization, particularly for use-oriented and results-oriented advanced services. The objective of this study is to identify the capabilities required to successful develop advanced services as part of servitization by considering the perspective of manufacturers, intermediaries and customers. This study involved interviews with 33 managers in 28 large UK-based companies from these three groups, about servitization capabilities. The findings suggest that there are eight broad capabilities that are important for advanced services; 1) personnel with expertise and deep technical product knowledge, 2) methodologies for improving operational processes, helping to manage risk and reduce costs, 3) the evolution from being a product- focused manufacturer to embracing a services culture, 4) developing trusting relationships with other actors in the network to support the delivery of advanced services, 5) new innovation activities focused on financing contracts (e.g., ‘gain share’) and technology implementation (e.g., Web-based applications), 6) customer intimacy through understanding their business challenges in order to develop suitable solutions, 7) extensive infrastructure (e.g., personnel, service centres) to deliver a local service, and 8) the ability to tailor service offerings to each customer’s requirements and deliver these responsively to changing needs. The capabilities required to develop and deliver advanced services align to a need to enhance the operational performance of supplied products throughout their lifecycles and as such require greater investment than the capabilities for base and intermediate services.

The Technology of Programming for a Cluster Computer by the Remote Terminal with OS Windows

The problem of preparation of a program to perform it on multiprocessor system of a cluster type is considered. When developing programs for a cluster computer the technology based on use of the remote terminal is applied. The situation when such remote terminal is the computer with operational system Windows is considered. The set of the tool means, allowing carrying out of editing program texts, compiling and starting programs on a cluster computer, is suggested. Advantage of an offered way of preparation of programs to execution is that it allows as much as possible to use practical experience of programmers used to working in OS Windows environment.

Technology enhanced learning in Higher Education

Technology-Enhanced Learning in Higher Education is an anthology produced by the international association, Learning in Higher Education (LiHE). LiHE, whose scope includes the activities of colleges, universities and other institutions of higher education, has been one of the leading organisations supporting a shift in the education process from a transmission-based philosophy to a student-centred, learning-based approach. Traditionally education has been envisaged as a process in which the teacher disseminates knowledge and information to the student, and directs them to perform – instructing, cajoling, encouraging them as appropriate – despite different students’ abilities. Yet higher education is currently experiencing rapid transformation, with the introduction of a broad range of technologies which have the potential to enhance student learning. This anthology draws upon the experiences of those practitioners who have been pioneering new applications of technology in higher education, highlighting not only the technologies themselves but also the impact which they have had on student learning. The anthology illustrates how new technologies – which are increasingly well-known and accepted by today’s ‘digital natives’ undertaking higher education – can be adopted and incorporated. One key conclusion is that learning remains a social process even in technology-enhanced learning contexts. So the technology-based proxies we construct need to retain and reflect the agency of the teacher. Technology-Enhanced Learning in Higher Education showcases some of the latest pedagogical technologies and their most creative, state-of-the-art applications to learning in higher education from around the world. Each of the chapters explores technology-enhanced learning in higher education in terms of either policy or practice. They contain detailed descriptions of approaches taken in very different curriculum areas, and demonstrate clearly that technology may and can enhance learning only if it is designed with the learning process of students at its core. So the use of technology in education is more linked to pedagogy than it is to bits and bytes.

Advanced ICT based Training Methods

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013

A jövő intelligens technológiai és menedzsmentkérdései-avagy semmilyen szél nem jó annak, aki nem tudja milyen kikötőbe tart (Managerial questions of the future intelligent technologies, or there is no good wind for those who do not know which port they want to sail)

Az elmúlt évtizedek felgyorsult technológiai fejlődése komoly kihívásokat jelent mind a cégeknek, mind az egyéneknek. Intézményesített „jövőkezelésre” és ennek menedzselésére van szükség. A szerzők tanulmányukban át kívánják tekinteni a jövőkutatás, a technológiamenedzsment, az innovációmenedzsment és egyéb megközelítések releváns alapjait, viszonyait és lehetséges integrációjukat. Be kívánják mutatni a meghatározó területeket és trendeket. Keresik azokat a menedzsment-alapkérdéseket, tanulságokat és dilemmákat, amelyek minden olyan vállalatnak érdekesek és hasznosak lehetnek, amelyek a fejlődő technológia lehetőségeit szeretnék kiaknázni, vagy csak egyszerűen szeretnének a követhetetlenül gyors fejlődésben talpon maradni. _____________ The fast pace technology development creates a serious challenge both for individuals and for companies. There is a concept which attempts to handle this challenge by “institutional future management”. In their paper the authors survey the relevant concepts of future studies, technology management and other areas, and explore their connections and integration possibilities. They also would like to introduce some key technology trends, and at the same time some basic managerial questions, dilemmas, conclusions which might have importance to those corporations which have to survive in an environment determined by accelerated technology based innovation.

Market definition in industrial high-technology markets

This dissertation analyzes how marketers define markets in technology-based industries. One of the most important strategic decisions marketers face is determining the optimal market for their products. Market definition is critical in dynamic high technology markets characterized by high levels of market and technological uncertainty. Building on literature from marketing and related disciplines, this research is the first in-depth study of market definition in industrial markets. Using a national, probability sample stratified by firm size, 1,000 marketing executives in nine industries (automation, biotechnology, computers, medical equipment and instrumentation, pharmaceuticals, photonics, software, subassemblies and components, and telecommunications) were surveyed via a mail questionnaire. A 20.8% net response rate yielding 203 surveys was achieved. The market structure-conduct-performance (SCP) paradigm from industrial organization provided a conceptual basis for testing a causal market definition model via LISREL. A latent exogenous variable (competitive intensity) and four latent endogenous variables (marketing orientation, technological orientation, market definition criteria, and market definition success) were used to develop and test hypothesized relationships among constructs. Research questions relating to market redefinition, market definition characteristics, and internal (within the firm) and external (competitive) market definition were also investigated. Market definition success was found to be positively associated with a marketing orientation and the use of market definition criteria. Technological orientation was not significantly related to market definition success. Customer needs were the key market definition characteristic to high-tech firms (technology, competition, customer groups, and products were also important). Market redefinition based on changing customer needs was the most effective of seven strategies tested. A majority of firms regularly defined their market at the corporate and product-line level within the firm. From a competitive perspective, industry, industry sector, and product-market definitions were used most frequently.