Análise de resolução em tomografia interpoços em 3-D

A aplicação de métodos de inversão aos dados de múltiplos levantamentos sísmicos interpoços permite a reconstrução de modelos de vagarosidade em 3-D de alta resolução adequados para monitoramento de processos de recuperação avançada de petróleo e caracterização de reservatórios. Entretanto, a falta de cobertura volumétrica uniforme de raios de levantamentos interpoços exige informação adicional ao sistema tomográfico para obtenção de soluções estáveis. A discretização do modelo em uma malha 3-D com células prismáticas triangulares e a decomposição em valores singulares são utilizadas para avaliar a reconstrução tomográfica em 3-D. O ângulo da projeção de modelos-alvo no subespaço ortogonal ao espaço nulo efetivo da matriz tomográfica é um critério adequado para se otimizar a malha de discretização do modelo interpretativo e a geometria de aquisição dos dados de modo a melhorar o condicionamento da reconstrução tomográfica. Esta abordagem pode ser utilizada durante as iterações lineares para redefinir a malha ou avaliar a necessidade de informação a priori adicional ao sistema tomográfico.

Estudo comparativo entre estereotomografia e da tomografia da onda NIP: aplicação em dados sintéticos e reais

A determinação de um acurado modelo de velocidades é um requisito fundamental para a realização do imageamento sísmico. Métodos novos como a Estereotomografia préempilhamento e a Tomografia da onda NIP são ferramentas poderosas e bastante sugestivas para este propósito. Basicamente, a Estereotomografia pré-empilhamento se baseia no conceito de eventos localmente coerentes interpretados como reflexões primárias e associados com pares de segmentos de raios, que tem um mesmo ponto de reflexão em profundidade. Na Tomografia da onda NIP um evento sísmico é representado por uma onda hipotética NIP, que está relacionada a um ponto de reflexão em profundidade. Os atributos da onda NIP são determinados no decorrer do Empilhamento de Superfície de Reflexão Comum (empilhamento CRS). Este trabalho tem como objetivo, fazer um estudo comparativo de ambos os métodos de determinação do modelo de velocidades em profundidade. Assim, é realizada uma revisão dos fundamentos teóricos de ambos os métodos tomográficos, destacando as principais diferenças e aplicando estas aproximações em um dado sintético e um dado real marinho (linha sísmica 214-2660 da Bacia do Jequitinhonha). Para avaliar os modelos de velocidades encontrados pelas aproximações, foi utilizada a migração pré-empilhamento em profundidade do tipo Kirchhoff e também as famílias de imagem comum (CIG). Os resultados mostraram que ambos os métodos tomográficos fornecem modelos de velocidades representativos. Contudo, constatou-se que a estereotomografia tem melhor desempenho em meios com variações laterais de velocidades, porém, aplicável somente em dados pré-empilhados com alta razão sinal/ruído.

Avaliação por meio da tomografia computadorizada de feixes cônicos e radiografia cefalométrica lateral do espaço aéreo faríngeo em indivíduos submetidos à cirurgia ortognática

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação dos efeitos da expansão rápida da maxila no volume aéreo nasal, por meio da tomografia computadorizada de feixe cônico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da rebsorção óssea do periodonto de cães por meio da tomografia computadorizada

Pós-graduação em Medicina Veterinária - FMVZ

Estudo da interação de prótons com alvos não homogêneos, aplicados a tomografia com feixes de prótons

Pós-graduação em Biologia Geral e Aplicada - IBB

The use of radon (Rn-222) and volatile organic compounds in monitoring soil gas to localize NAPL contamination at a gas station in Rio Claro, Sao Paulo State, Brazil

This study focuses on the presence of radon (Rn-222) and volatile organic compounds (VOCs) in soil gases at a gas station located in the city of Rio Claro, Sao Paulo, Brazil, where a fossil fuel leak occurred. The spatial distribution results show a correlation between Rn-222 and VOCs, consistent with the fact that radon gas has a greater chemical affinity with organic phases than with water. This finding demonstrates that the presence of a residual hydrocarbon phase in an aquifer can retain radon, leading to a reduced radon content in the soil gas. The data in this study confirm the results of previous investigations, in which the method used in this study provided a preliminary fingerprint of a contaminated area. Furthermore, the data analysis time is brief, and only simple equipment is required. (C) 2014 Published by Elsevier Ltd.

Dissolved uranium, radium and radon evolution in the Continental Intercalaire aquifer, Algeria and Tunisia

Natural, dissolved U-238-series radionuclides (U, Ra-226, Rn-222) and activity ratios (A.R.s: U-234/U-238; Ra-228/Ra-226) in Continental Intercalaire (Cl) groundwaters and limited samples from the overlying Complexe Terminal (CT) aquifers of Algeria and Tunisia are discussed alongside core measurements for U/Th (and K) in the contexts of radiological water quality, geochemical controls in the aquifer, and water residence times. A redox barrier is characterised downgradient in the Algerian Cl for which a trend of increasing U-234/U-238 A.R.s with decreasing U-contents due to recoil-dominated U-234 solution under reducing conditions allows residence time modelling similar to 500 ka for the highest enhanced A.R. = 3.17. Geochemical modelling therefore identifies waters towards the centre of the Grand Erg Oriental basin as palaeowaters in line with reported C-14 and Cl-36 ages. A similar U-234/U-238 trend is evidenced in a few of the Tunisian CI waters. The paleoage status of these waters is affirmed by both noble gas recharge temperatures and simple modelling of dissolved, radiogenic He-4-contents both for sampled Algerian and Tunisian CI and CT waters. For the regions studied these waters therefore should be regarded as "fossil" waters and treated effectively as a non-renewable resource. (C) 2014 The Authors. Published by Elsevier Ltd.

Towards a Brazilian radon map: consortium radon Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação das condições de uso de um equipamento de tomografia computadorizada e otimização de protocolos de crânio empregados na rotina do HCFMB-UNESP

Almost forty years computed tomography (CT) has been one of the most powerful tools in diagnostic imaging. However, this modality delivers relatively high doses to their patients. It is known that the inappropriate use and unnecessary radiation may be associated with a significant risk of cancer, especially in pediatric patients. Moreover, the quality assurance in CT, provided and required by Portaria 453/98 and the guide of the RE 1016/05, ensures that the images generated by computer tomography provide reliable diagnostic information with doses as low as reasonably achievable. This research aimed to make the quality control (QC) of CT equipment; establish a better relationship between dose and noise on the image to protocols of skull CT according to the study of optimization proposed in 2005 by Daros; and assess the dose distribution in different cranial organs for protocols of adult and pediatric use in the routine of the Department of Diagnostic Imaging of HCFMB-UNESP. The equipment used for testing QC, optimization and dosimetry was a third generation tomograph GE Sytec 3000i

Estudo da dose efetiva, razão sinal-ruído e razão contraste-ruído em tomografia computadorizada de múltiplos detetores

Since discovery, computed tomography is a widely used diagnostic modality. However, this modality imparts relatively high doses to the patients and with fast technological advancement, it is necessary optimize the doses used and ensure the quality of the images through a quality assurance program. This work intended to compare Computed Tomography Dose Index (CTDIW) and effective dose with components of image quality: the Contrast-to-Noise Ratio (CNR) and Signal-to-Noise Ratio (SNR), and a quality factor (Q) deduced by the Rose model for two groups of computed tomography units. The first group was composed by equipments with 10 up to 16 slices and the second one presented 40 up to 320 slices detectors, for the protocols of head and abdomen. It was realized a comparison between different selectable parameters in the protocol of a Philips Brilliance 16, too. The results of the first group to CTDIW, effective dose, SNR and CNR showed variations of 28%, 33%, 37% and 32% respectively for head protocol, and 21%, 27%, 43% and 37% respectively for abdomen protocol. The results of the group 2 to CTDIW, effective dose, SNR and CNR showed variations of 15%, 26%, 36% and 34% respectively for the head protocol, and 8%, 13%, 50% and 60% respectively for abdomen protocol. The comparison between both groups demonstrated similar levels of doses impartation to patients though having so many different configurations, if the uncertainties associated with this measurement were considered. The results of the comparison between different parameters in the Philips Brilliance 16 scanner were in agreement with expected

Controle de qualidade em equipamentos de tomografia computadorizada

The computed tomography, devised by Godfrey Hounsfield and Allan Cormack, is in its fourth decade of the clinical use and has presented to be a very useful tool in the diagnosis of several pathologies. For this reason, its use is increasing each day, due to technological progress since its creation. Due to be more and more utilized, the equipment must be in good operating conditions, because it is subject to variance and wearing, damage the quality of diagnosis. To evaluate whether the performance of the scanner remains constant along the time and the dose received by the patient is within the desired limits, periodic tests of quality control must be performed. For this subject, the regulation 453 (June 01, 1998) was created, which determines the need of the implementation of a program for quality assurance (PGQ), where, in addition to the tests of quality control, are established the necessary measurements for the proper functioning of the equipment, generating a trustworthy diagnosis, reducing the dose for the patient and the costs. In this document, are presented tests of quality control carried out in hospitals of the city of Sao Paulo carried out together with the Technical Section of Applications by Imaging Diagnostic (STADI) of the Institute of Electrotechnics and Energy of the University of São Paulo (IEE/USP)

Tomografia por Biosusceptometria de Corrente Alternada (tBAC): desenvolvimento, caracterização, implementação

The Biosusceptometry AC (BAC) is a research tool that has been extensively explored by the group Biomagnetism IBB-UNESP for monitoring of the gastrointestinal tract, its response to a known drug or in vivo performance of solid dosage forms. During this period the BAC, which has the characteristics of high sensitivity and low cost, has been developed primarily for recording signals contraction of activity and traffic human gastrointestinal tract. With the possibility of producing images with this instrumentation, it was possible to evaluate different situations in vitro and in vivo for physiological studies and pharmaceuticals. Considering the good performance of this system to produce planar images, the first aim of the BAC system tomography (TBAC) was to evaluate the system performance of BAC to produce tomographic images of phantoms ferromagnetic for a single channel system. All these applications were only possible because of their sensitivity to materials of high magnetic suscepitibility as ferrite, which allow to produce an electrical signal proportional to the variation of the magnetic flux generated by the presence of magnetic marker next to a first-order gradiometer. Measuring this variation at various points was possible to generate planar images that recently came to be produced in systems with multiple detectors, said multi-channels. From planar images, also producing tomographic images of simulators BAC bars in a system of 13 channels using only the center channel, with good results when applied to simple objects as one and two bars. When testing the resolution of the system with more elaborate forms the quality and resolution of images reconstructed is not satisfactory, which would be solved by increasing the spatial sampling rate and hence the acquisition time. The present system works with an acquisition time of about five hours. Whereas this system will be applied for in vivo experiments, the acquisition time became a ...

Estudo teórico da contribuição do espalhamento nuclear não elástico na trajetória de prótons de energias entre 50 e 250 MeV em materiais de interesse em radiologia: aplicação em tomografia com prótons

The goal of this work is to study the process of interaction of protons with matter through Monte Carlo simulation. For this purpose, it was employed the SRIM program (Stopping and Range of Ions in Matter ) and MCNPX (Monte Carlo N-Particle eXtended) v2.50. This work is going to support the development of a tomography system with protons. It was studied the interaction of proton with the follow materials: Polimethyl Mehacralate (PMMA), MS20 Tissue Substitute and water. This work employed energies in range of 50 MeV and 250 MeV, that is the range of clinical interest. The energy loss of proton after cross a material layer, the decreasing of its intensity, the angular and lateral de ection of incident beam, including and excluding nuclear interactions. This work is related with Medical Physics and Material Physics, like interaction of radiation with matter, particle transport phenomena, and the experimental methods in Nuclear Physics like simulation and computational by Monte Carlo method

Angiografia comparativa, prós e contras entre os métodos: por raios-X, Tomografia Computadorizada e Ressonância Magnética

By the early 20th century, the blood vessels could only be seen by anatomical studies. Shortly after the discovery of X-rays by Conrad Roentgen in 1895, the first experiments with radiographic imaging were performed with blood vessels. In 1905, the first experiment involving catheterization of arterial and venous system in dogs was performed and only in 1914 performed on living human patients. Parallel to these landmarks, there were advances in diagnostic imaging devices and the evolution of contrast substances was of utmost importance to the current angiography occupy a prominent role not only in terms of diagnosis, but also in the treatment of various disorders. The main objective of this review is to weave historical considerations and comparisons between the different methodologies used in angiography, because its importance; that may be in future, a veterinary diagnostic decisive test