Streptozotocin-induced diabetes mellitus affects lysosomal enzymes in rat liver

It has been previously shown that dextran sulfate administered to diabetic rats accumulates in the liver and kidney, and this could be due to a malfunction of the lysosomal digestive pathway. The aim of the present study was to evaluate the expression and activities of lysosomal enzymes that act upon proteins and sulfated polysaccharides in the livers of diabetic rats. Diabetes mellitus was induced by streptozotocin in 26 male Wistar rats (12 weeks old), while 26 age-matched controls received only vehicle. The livers were removed on either the 10th or the 30th day of the disease, weighed, and used to evaluate the activity, expression, and localization of lysosomal enzymes. A 50-60% decrease in the specific activities of cysteine proteases, especially cathepsin B, was observed in streptozotocin-induced diabetes mellitus. Expression (mRNA) of cathepsins B and L was also decreased on the 10th, but not on the 30th day. Sulfatase decreased 30% on the 30th day, while glycosidases did not vary (or presented a transitory and slight decrease). There were no apparent changes in liver morphology, and immunohistochemistry revealed the presence of cathepsin B in hepatocyte granules. The decrease in sulfatase could be responsible for the dextran sulfate build-up in the diabetic liver, since the action of sulfatase precedes glycosidases in the digestive pathway of sulfated polysaccharides. Our findings suggest that the decreased activities of cathepsins resulted from decreased expression of their genes, and not from general lysosomal failure, because the levels of glycosidases were normal in the diabetic liver.

Synthesis and characterization of nanoperforated metal oxide thin films

For advanced devices in the application fields of data storage, solar cell and biosensing, one of the major challenges to achieve high efficiency is the fabrication of nanopatterned metal oxide surfaces. Such surfaces often require both precise structure at the nanometer scale and controllable patterned structure at the macro scale. Nowadays, the dominating candidates to fabricate nanopatterned surfaces are the lithographic technique and block-copolymer masks, most of which are unfortunately costly and inefficient. An alternative bottom-up approach, which involves organic/inorganic self-assembly and dip-coating deposition, has been studied intensively in recent years and has proven to be an effective technique for the fabrication of nanoperforated metal oxide thin films. The overall objective of this work was to optimize the synthesis conditions of nanoperforated TiO2 (NP-TiO2) thin films, especially to be compatible with mixed metal oxide systems. Another goal was to develop fabrication and processing of NP-TiO2 thin films towards largescale production and seek new applications for solar cells and biosensing. Besides the traditional dip-coating and drop-casting methods, inkjet printing was used to prepare thin films of metal oxides, with the advantage of depositing the ink onto target areas, further enabling cost-effective fabrication of micro-patterned nanoperforated metal oxide thin films. The films were characterized by water contact angle determination, Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Grazing Incidence XRay Diffraction. In this study, well-ordered zinc titanate nanoperforated thin films with different Zn/Ti ratios were produced successfully with zinc precursor content up to 50 mol%, and the dominating phase was Zn2Ti3O8. NP-TiO2 structures were also obtained by a cost-efficient means, namely inkjet printing, at both ambient temperature and 60 °C. To further explore new biosensing applications of nanoperforated oxide thin films, inkjet printing was used for the fabrication of both continuous and patterned polymeric films onto NP-TiO2 and perfluorinated phosphate functionalized NP-TiO2 substrates, respectively. The NP-TiO2 films can be also functionalized with a fluoroalkylsilane, resulting in hydrophobic surfaces on both titania and silica. The surface energy contrast in the nanoperforations can be tuned by irradiating the films with UV light, which provides ideal model systems for wettability studies.

Influence du chondroïtine sulfate (CS) sur l’activité et l’expression de plusieurs isoformes du cytochrome P450 et de la NADPH P450 réductase

Le CS fait partie de la famille des SYSADOA (SYmptomatic Slow Acting Drugs for OsteoArthritis) et est utilisé par les patients avec de l’ostéoarthrose de façon chronique pour ses propriétés anti-inflammatoires. Étant donné que ces patients reçoivent d’autres médicaments, il était intéressant de documenter les effets du CS sur le cytochrome P450 et la NADPH-réductase (NADPH). Pour cette étude, deux modèles ont été utilisés: des lapins témoins (LT) et des lapins avec une réaction inflammatoire (LRI) afin de diminuer l’activité et l’expression du CYP. Six groupes contenant chacun cinq lapins ont été utilisés: un groupe sans CS et deux groupes qui ont pris oralement dans l’eau approximativement 20.5 mg/kg/jour de CS pendant 20 et 30 jours; les lapins des trois groupes restants ont pris du CS comme décrit plus haut, mais ont reçu 5 ml sous-cutanées de térébenthine afin de produire une réaction inflammatoire aseptique (RIA) deux jours avant leur sacrifice, c’est-à-dire aux jours -2, 18 et 28. Les hépatocytes ont été isolés pour évaluer l’activité et l’expression du CYP3A6, CYP1A2 et NADPH et aussi le ARNm de ces protéines. In vitro, nous avons étudié l’effet de différentes concentrations de CS-disaccharides sulfatés, 4S, 6S, et 4,6S de CS, sur l’activité et l’expression du CYP1A2 et du CYP3A6. Pour documenter la présence de la réaction inflammatoire, nous avons mesure les mucoprotéines, dans le sérum des lapins avec une réaction inflammatoire. Aussi nous avons mesuré la présence de l’oxide nitrique (NO) chez les hépatocytes de lapins contrôles et chez les hépatocytes des lapins avec une réaction inflammatoire. La translocation nucléaire du NF-κB a été etudiée par fluorescence chez les hépatocytes. Par comparaison aux lapins témoins, l’administration du CS pendant 20 et 30 jours n’affecte pas l’activité du CYP3A6 et du CYP1A2. La RIA a augmenté les mucoprotéines à 95,1±5,7 vs 8,4±1,6 mg/dl dans les lapins témoins (p<0,05). La RIA a diminué l’activité du CYP3A6 de 62% et l’activité du CYP 1A2 de 54%. Le CS n’empêché pas la diminution du CYP1A2 produite par la RIA. Par ailleurs, le CS n’affecte pas l’activité ni l’expression de la NADPH. La translocation nucléaire de NF-κB a été empêche par l’administration chronique de CS aux lapins avec RIA; en plus, la concentration de l’oxide nitrique n’a pas démontré une augmentation en présence de CS; par contre, CS n’empêche pas l’augmentation des séromucoïdes. Au contraire, CS affecte la diminution du CYP3A6 en fonction de temps et secondaire à la RIA. Dans ce group, CS a rétabli le niveau des protéines du CYP3A6 observé dans le group de lapins témoins. Pourtant cette croissance été independante de mRNA qui garde un niveau trés bas. Le plus remarcable a été la manière dont CS a augmenté la protéine du CYP3A6, sans avoir rétabli l’activité de cet isoforme. Finalement, in vitro, CS et ses trois disaccharides sulfatés (4S, 6S et 4,6S) n’affectent ni l’activité ni l’expression de CYP1A2, CYP3A6 et de la NADPH. En conclusion, l’administration chronique de CS n’affecte pas l’activité ni l’expression du CYP1A2, ou la diminution du CYP1A2 produite par la réaction inflammatoire. Le CS n’affecte pas l’activité ni l’expression du NADPH. Cependant, CS empêche la diminution du CYP3A6 en fonction de temps et secondaire à la RIA.

Studies toward the total synthesis of natural and unnatural aeruginosins

Nous avons démontré l’utilité du groupement protecteur tert-butylsulfonyle (N-Bus) pour la chimie des acides aminés et des peptides. Celui-ci est préparé en deux étapes, impliquant la réaction d’une amine avec le chlorure de tert-butylsulfinyle, suivie par l’oxydation par du m-CPBA, pour obtenir les tert-butylsulfonamides correspondants avec d’excellents rendements. Le groupement N-Bus peut être clivé par traitement avec 0.1 N TfOH/DCM/anisole à 0oC en 10h pour régénérer le sel d’ammonium. Une variété d’acides aminés N-Bus protégés ainsi que d’autres aminoacides peuvent alors être utilisés pour préparer divers dipeptides et tripeptides. A l’exception du groupe N-Fmoc, les conditions de déprotection du groupe N-Bus clivent également les groupements N-Boc, N-Cbz et O-Bn. Une déprotection sélective et orthogonale des groupes N-Boc, N-Cbz, N-Fmoc et O-Bn est également possible en présence du groupe protecteur N-Bus. Le nouvel acide aminé non-naturel (3R, 2R) 3–méthyl-D-leucine (β-Me-Leu) et son régioisomère 2-méthyle ont été synthétisés par ouverture d’une N-Ts aziridine en présence d’un excès de LiMe2Cu. Chacun des régioisomères du mélange (1:1,2) a été converti en la méthylleucine correspondante, puis couplé à l’acide D-phényllactique puis au motif 2-carboxyperhydroindole 4-amidinobenzamide en présence de DEPBT. Des élaborations ultérieures ont conduit à des analogues peptidiques non-naturels d’aeruginosines telles que la chlorodysinosine A. Les deux analogues ont ensuite été évalués pour leur activité inhibitrice de la thrombine et la trypsine. La présumée aeruginosine 3-sulfate 205B et son anomère β ont été synthétisés avec succès à partir de 5 sous-unités : la 3-chloroleucine, l’acide D-phényllactique, le D-xylose, le 2-carboxy-6-hydroxyoctahydroindole et l’agmatine. La comparaison des données RMN 1H et 13C reportées avec celles obtenues avec l’aeruginosine synthétique 205B révèle une différence majeure pour la position du groupe présumé 3'-sulfate sur l’unité D-xylopyranosyle. Nous avons alors synthétisés les dérivés méthyl-α-D-xylopyranosides avec un groupement sulfate à chacune des positions hydroxyles, afin de démontrer sans ambiguïté la présence du sulfate en position C-4' par comparaison des données spectroscopiques RMN 1H et 13C. La structure de l’aeruginosine 205B a alors été révisée. Une des étapes-clés de cette synthèse consiste en la formation du glycoside avec le groupe hydroxyle en C-6 orienté en axial sur la sous-unité Choi. Le 2-thiopyridylcarbonate s’est avéré une méthode efficace pour l’activation anomérique. Le traitement par AgOTf et la tétraméthylurée en solution dans un mélange éther-DCM permet d’obtenir l’anomère α désiré, qui peut alors être aisément séparé de l’anomère β par chromatographie

Conception et évaluation d’un nouveau système de transfection ciblée, basé sur l’utilisation du système E/Kcoil

Actuellement le polyéthylènimine (PEI) est l’agent de transfection transitoire le plus utilisé par l’industrie pharmaceutique pour la production de protéines recombinantes à grande échelle par les cellules de mammifères. Il permet la condensation de l’ADN plasmidique (ADNp) en formant spontanément des nanoparticules positives appelées polyplexes, lui procurant la possibilité de s’attacher sur la membrane cellulaire afin d’être internalisé, ainsi qu’une protection face aux nucléases intracellulaires. Cependant, alors que les polyplexes s’attachent sur la quasi-totalité des cellules seulement 5 à 10 % de l’ADNp internalisé atteint leur noyau, ce qui indique que la majorité des polyplexes ne participent pas à l’expression du transgène. Ceci contraste avec l’efficacité des vecteurs viraux où une seule particule virale par cellule peut être suffisante. Les virus ont évolués afin d’exploiter les voies d’internalisation et de routage cellulaire pour exprimer efficacement leur matériel génétique. Nous avons donc supposé que l’exploitation des voies d’internalisation et de routage cellulaire d’un récepteur pourrait, de façon similaire à plusieurs virus, permettre d’optimiser le processus de transfection en réduisant les quantités d’ADNp et d’agent de transfection nécessaires. Une alternative au PEI pour transfecter les cellules de mammifèreest l’utilisation de protéines possédant un domaine de liaison à l’ADNp. Toutefois, leur utilisation reste marginale à cause de la grande quantité requise pour atteindre l’expression du transgène. Dans cette étude, nous avons utilisé le système E/Kcoil afin de cibler un récepteur membranaire dans le but de délivrer l’ADNp dans des cellules de mammifères. Le Ecoil et le Kcoil sont des heptapeptides répétés qui peuvent interagir ensemble avec une grande affinité et spécificité afin de former des structures coiled-coil. Nous avons fusionné le Ecoil avec des protéines capables d’interagir avec l’ADNp et le Kcoil avec un récepteur membranaire que nous avons surexprimé dans les cellules HEK293 de manière stable. Nous avons découvert que la réduction de la sulfatation de la surface cellulaire permettait l’attachement ciblé sur les cellules par l’intermédiaire du système E/Kcoil. Nous démontrons dans cette étude comment utiliser le système E/Kcoil et une protéine interagissant avec l’ADNp pour délivrer un transgène de manière ciblée. Cette nouvelle méthode de transfection permet de réduire les quantités de protéines nécessaires pour l’expression du transgène.

Studies on Catalysis by Vanadia Supported On Metal Oxides

Catalysis is an essential technology in manufacturing industries. The investigation based on supported vanadia catalysts and it’s sulfated analogues. Vanadia is a transition metal oxide and is used in oxidation reactions in chemical industry. It is more active and selective catalysts on suitable supports. The work deals with preparation of vanadia incorporated tin oxide and zirconia systems by wet impregnation. Physico-chemical characterization using instrumental techniques like BET etc. The surface acidic properties were determined by the ammonia TPD studies, Perylene absorption studies and Cumene conversion reaction. The catalytic activities of the prepared systems are tested by Friedel-Crafts benzylation of arenes and Bechmann rearrangement of Cyclohexanol oxime. Here the rector reactions are relatively rare. So to test the application of the catalyst systems for the selective oxidation of cyclohexanol to cyclohexanone and finally evaluate the catalytic activity of the systems for the vapour phase oxidative dehydrogenation of Ethylbenzene, which leads to the formation of Industrially important compound ‘styrene’ is another objective of this work

Photodegradation of Methylorange over Zirconia Doped TiO2 Using Solar Energy

The heterogeneous photocatalytic degradation of methylorange over TiO2 is studied and is found to be cost effective. Effect of Zirconium metal incorporation over titania system is investigated. Photocatalytic degradation of methylorange using solar radiation is found to be highly economical when compared with the processes using artificial UV radiation, which require substantial electrical power input. The characterization of titania as well as modified zirconium metal doped titania systems are done using XRD, FTIR and EDAX measurements. The catalytic activities of different systems are also compared and is tried to correlate with the crystallite size and presence of dopant metal.

A comparative study on the anisole methylation activity of lanthanum-promoted Sn02 catalyst and its sulfate-doped analogue

A comparative study on the anisole methylation with methanol over lanthanum-promoted Sn02 catalyst and its sulfate-doped analogue is presented. A maximum 2.6-xylenol selectivity of 82% was achieved at 400 degreeC under optimized conditions at an anisole conversion of 65% over lanthanum-promoted Sn02 catalyst. The sulfate modification resulted in the dealkylation of anisole to phenol followed by several unselective side reactions due to the creation of strong acid sites. The activity of lanthanum-modified tin oxide catalysts in the selective formation of 2.6-xylenol is ascribed to the presence of weak Lewis acid sites and comparatively stronger basic sites.

Modification of Linear Low Density Polyethylene for Improved Photo and Biodegradation

LLDPE was blended with poly (vinyl alcohol) and mechanical, thermal, spectroscopic properties and biodegradability were investigated. The biodegradability of LLDPE/PVA blends has been studied in two environments, viz. (1) a culture medium containing Vibrio sp. and (2) a soil environment over a period of 15 weeks. Nanoanatase having photo catalytic activity was synthesized by hydrothermal method using titanium-iso-propoxide. The synthesized TiO2 was characterized by X-Ray diffraction (XRD), BET studies, FTIR studies and scanning electron microscopy (SEM). The crystallite size of titania was calculated to be ≈ 6nm from the XRD results and the surface area was found to be about 310m2/g by BET method. SEM shows that nanoanatase particles prepared by this method are spherical in shape. Linear low density polyethylene films containing polyvinyl alcohol and a pro-oxidant (TiO2 or cobalt stearate with or without vegetable oil) were prepared. The films were then subjected to natural weathering and UV exposure followed by biodegradation in culture medium as well as in soil environment. The degradation was monitored by mechanical property measurements, thermal studies, rate of weight loss, FTIR and SEM studies. Higher weight loss, texture change and greater increments in carbonyl index values were observed in samples containing cobalt stearate and vegetable oil. The present study demonstrates that the combination of LLDPE/PVA blends with (I) nanoanatase/vegetable oil and (ii) cobalt stearate/vegetable oil leads to extensive photodegradation. These samples show substantial degradation when subsequent exposure to Vibrio sp. is made. Thus a combined photodegradation and biodegradation process is a promising step towards obtaining a biodegradable grade of LLDPE.

Synthesis, Characterization and Applications of Modified TiO2 Systems

This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.

Estudi estructural, ultraestructural i histoquímic de les glàndules sexuals accessòries del mascle reproductor porcí (Sus domesticus)

El present treball analitza al microscopi òptic i al microscopi electrònic de transmissió les glàndules sexuals accessòries de Sus domesticus (raça Landrace - varietat anglesa) a partir de mascles reproductors porcins adults i sans. Un millor coneixement dels patrons estructural i ultraestructural normals de las glàndules sexuals accessòries permetrà diagnosticar amb facilitat quina ha estat l'estructura o la funció glandular afectada en mascles en els que s'observa una disminució de la qualitat del semen. Per altra banda, els estudis anatomopatològics s'han de complementar amb tècniques histoquímiques que generalment permeten confirmar o excloure un diagnòstic histopatològic previ. Les glàndules sexuals accessòries del mascle reproductor porcí estan molt desenvolupades i inclouen les glàndules vesiculars, la pròstata i les glàndules bulbouretrals. L'epiteli secretor de les glàndules vesiculars està format per cèl·lules columnars, cèl·lules basals i mastòcits. Les cèl·lules columnars es caracteritzen per presentar tres morfologies diferents que es consideren diferents estadis d'un mateix tipus cel·lular: les cèl·lules principals, les cèl·lules clares i les cèl·lules denses. Les cèl·lules principals secreten activament glicoproteïnes N- i O- glicosilades amb residus d'α-L-fucosa, α(16)fucosa, α-D-mannosa, α-D-glucosa, α- i -D-N-acetilgalactosamina, -D-galactosa-(13)-D-N-acetilgalactosamina, α-D-galactosa, galactosa-(14)-N-acetilglucosamina, D-N-acetilglucosamina i àcid neuramínic. Aquestes glicoproteïnes afavoreixen les interaccions entre l'espermatozoide i l'occit i regulen la permeabilitat de la membrana espermàtica. La pròstata està formada per dues porcions glandulars, el cos de la pròstata (BP) y la pròstata disseminada (DP), entre las quals s'observen diferencies estructurals, ultraestructurals, histoquímiques i funcionals. En ambdues porcions, l'epiteli secretor està constituït per cèl·lules columnars principals, denses i cèl·lules basals, i també per cèl·lules cúbiques en el BP i per cèl·lules mucoses en la DP. En ambdues porcions glandulars, se sintetitzen i secreten N- i O- glicoproteïnes neutres i àcides. Aquestes glicoproteïnes s'alliberen mitjançant un mecanisme regulat en el BP y mitjançant un mecanisme regulat i un constitutiu en la DP. Les glucoproteïnes luminals del BP contenen residus de fucosa, mannosa, α- i -D-N-acetilgalactosamina, galactosa-(14)-N-acetilglucosamina, D-N-acetilglucosamina i àcid neuramínic. En la DP les glicoproteïnes presenten, a més, -D-galactosa-(13)-D-N-acetilgalactosamina i α-D-galactosa. Les glicoproteïnes secretades en el BP i en la DP per via regulada, participen en el control de l'estabilitat del plasmalemma dels espermatozoides, eviten la resposta immune uterina i l'aglutinació dels espermatozoides i afavoreixen la seva motilitat progressiva. Les glicoproteïnes secretades per via constitutiva en la DP protegeixen i lubrifiquen la uretra pelviana. L'epiteli secretor de les glàndules bulbouretrals està format per cèl·lules piramidals principals i denses. Les cèl·lules principals sintetitzen i secreten principalment O-glicoproteïnes àcides carboxilades i sulfatades amb residus glicosídics d'N-acetilgalactosamina, -D-galactosa-(13)-D-N-acetilgalactosamina, α-D-galactosa, D-N-acetilglucosamina i àcid neuramínic. Aquests residus proporcionen resistència a la proteolisi a les O-glicoproteïnes secretades, les quals participen en la lubrificació y protecció de l'epiteli, i intervenen en el control de la permeabilitat del plasmalemma dels espermatozoides i en el transport d'ions al seu través.

Model catalyst studies of the strong metal-support interaction: Surface structure identified by STM on Pd nanoparticles on TiO2(110)

Model catalysts of Pd nanoparticles and films on TiO2 (I 10) were fabricated by metal vapour deposition (MVD). Molecular beam measurements show that the particles are active for CO adsorption, with a global sticking probability of 0.25, but that they are deactivated by annealing above 600 K, an effect indicative of SMSI. The Pd nanoparticles are single crystals oriented with their (I 11) plane parallel to the surface plane of the titania. Analysis of the surface by atomic resolution STM shows that new structures have formed at the surface of the Pd nanoparticles and films after annealing above 800 K. There are only two structures, a zigzag arrangement and a much more complex "pinwheel" structure. The former has a unit cell containing 7 atoms, and the latter is a bigger unit cell containing 25 atoms. These new structures are due to an overlayer of titania that has appeared on the surface of the Pd nanoparticles after annealing, and it is proposed that the surface layer that causes the SMSI effect is a mixed alloy of Pd and Ti, with only two discrete ratios of atoms: Pd/Ti of 1: 1 (pinwheel) and 1:2 (zigzag). We propose that it is these structures that cause the SMSI effect. (c) 2005 Elsevier Inc. All rights reserved.

Sulfation of genistein alters its antioxidant properties and its effect on platelet aggregation and monocyte and endothelial function

Soy isoflavones have been extensively studied because of their possible benefits to human health. Genistein, the major isoflavone aglycone, has received most attention; however, it undergoes extensive metabolism (e.g. conjugation with sulfuric acid) in the gut and liver, which may affect its biological proper-ties. This study investigated the antioxidant activity and free radical-scavenging properties of genistein, genistein-4'-sulfate and genistein-4'-7-disulfate as well as their effect on platelet aggregation and monocyte and endothelial function. Electron spin resonance spectroscopy (ESR) and spin trapping data and other standard antioxidant assays indicated that genistein is a relatively weak antioxidant compared to quercetin and that its sulfated metabolites are even less effective. Furthermore, genistein-4'-sulfate was less potent than genistem, and genistein-4'-7-disulfate even less potent, at inhibiting collagen-induced platelet aggregation, nitric oxide (NO) production by macrophages, and secretion by primary human endothelial cells of monocyte chemoattractant protein 1 (MCP-1), intercellular adhesion molecule 1 (ICAM-1) and vascular cell adhesion molecule 1 (VCAM-1). The current data suggest that sulfation of genistein, with the associated loss of hydroxyl groups, decreases its antioxidant activity and its effect on platelet aggregation, inflammation, cell adhesion and chemotaxis. (C) 2004 Elsevier B.V All rights reserved.

The role of Ti3+ interstitials in TiO2(110) reduction and oxidation

Here we describe results which teach us much about the mechanism of the reduction and oxidation of TiO2(110) by the application of scanning tunnelling microscopy imaging at high temperatures. Titania reduces at high temperature by thermal oxygen loss to leave localized (i.e. Ti3+) and delocalized electrons on the lattice Ti, and a reduced titania interstitial that diffuses into the bulk of the crystal. The interstitial titania can be recalled to the surface by treatment in very low pressures of oxygen, occurring at a significant rate even at 573 K. This re-oxidation occurs by re-growth of titania layers in a Volmer-Weber manner, by a repeating sequence in which in-growth of extra titania within the cross-linked (1 x 2) structure completes the (1 x 1) bulk termination. The next layer then initiates with the nucleation of points and strings which extend to form islands of cross-linked (1 x 2), which once again grow and fill in to reform the (1 x 1). This process continues in a cyclical manner to form many new layers of well-ordered titania. The details of the mechanism and kinetics of the process are considered.