Fabrication of Three-Dimensional Dendritic Ni-Co Films By Electrodeposition on Stainless Steel Substrates

Co-deposition of nickel and cobalt was carried out on austenitic stainless steel (AISI 304) substrates by imposing a square waveform current in the cathodic region. The innovative procedure applied in this work allows creating a stable, fully developed, and open porous three-dimensional (3D) dendritic structure, which can be used as electrode for redox supercapacitors. This study investigates in detail the influence of the applied current density on the morphology, mass, and chemical composition of the deposited Ni-Co films and the resulting 3D porous network dendritic structure. The morphology and the physicochemical composition were studied by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (W). The electrochemical behavior of the materials was evaluated by cyclic voltammetry (CV). The results highlight the mechanism involved in the coelectrodeposition process and how the lower limit current density tailors the film composition and morphology, as well as its electrochemical activity.

Effect of the compact Ti layer on the efficiency of dye-sensitized solar cells assembled using stainless steel sheets

Titanium films have been deposited on stainless steel metal sheets using dc magnetron sputtering technique at different substrate temperatures. The structure of the titanium films strongly depend on the substrate temperature. The titanium film deposited at the substrate temperature lower than 300 ◦C has a loose flat sheet grains structure and the titanium film prepared at the substrate temperature higher than 500 ◦C has a dense nubby grains structure. The DSSC assembled using stainless steel sheet coated with titanium film deposited at high substrate temperature has a low charge transfer resistance in the TiO2/Ti interface and results in a high conversion efficiency. The DSSC assembled using stainless steel sheet coated with titanium film deposited at temperature higher than 500 ◦C has higher conversion efficiency than that assembled using titanium metal sheet as the substrate. The maximum conversion efficiency, 2.26% is obtained for DSSC assembled using stainless steel sheet coated with titanium film deposited at 700 ◦C substrate temperature, which is about 70% of the conversion efficiency of the FTO reference cell used in this study.

Simulation of the Magnetic Induction Vector of a Magnetic Core to be Used in FFC NMR Relaxometry

This paper is a contribution for the assessment and comparison of magnet properties based on magnetic field characteristics particularly concerning the magnetic induction uniformity in the air gaps. For this aim, a solver was developed and implemented to determine the magnetic field of a magnetic core to be used in Fast Field Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometry. The electromagnetic field computation is based on a 2D finite-element method (FEM) using both the scalar and the vector potential formulation. Results for the magnetic field lines and the magnetic induction vector in the air gap are presented. The target magnetic induction is 0.2 T, which is a typical requirement of the FFC NMR technique, which can be achieved with a magnetic core based on permanent magnets or coils. In addition, this application requires high magnetic induction uniformity. To achieve this goal, a solution including superconducting pieces is analyzed. Results are compared with a different FEM program.

Crianças com défices no controlo motor: contributo para a elaboração do core set da Classificação Internacional de Funcionalidade, Incapacidade e Saúde (CIF)

A CIF é um sistema de classificação adotado pela OMS, que serve de referência universal para descrever, avaliar e medir saúde e incapacidade, a nível individual e ao nível da população. Contudo, apesar do interesse internacional gerado em torno da CIF, esta é considerada uma classificação complexa e extensa, fato que despoletou a criação de core sets – listas de itens da CIF especificamente selecionados pela sua relevância na descrição e qualificação de uma determinada condição de saúde – como resposta a esta problemática. Até à data, foram desenvolvidos core sets para várias patologias comuns. Contudo, apesar do controlo motor ser uma área de investigação muito reconhecida nos últimos 20 anos, ainda não possui um core set próprio. Assim, o objetivo deste estudo é contribuir para o desenvolvimento de um core set, com base na CIF-CJ, dirigido para uma descrição abrangente das competências inerentes a crianças, dos 6 aos 18 anos de idade, com défices no controlo motor. Deste modo, recorreu-se a uma revisão da literatura sobre a temática em estudo, de modo a reunir informação para a construção de uma proposta a core set, posteriormente sujeita ao escrutínio de peritos, através do recurso ao método de Delphi. Após várias rondas, foi alcançado um consenso acerca da lista final de códigos CIF que constituem o core set final.

Iron oxide/gold core/shell nanomagnetic probes and CdS biolabels for amplified electrochemical immunosensing of Salmonella typhimurium

There is an imminent need for rapid methods to detect and determine pathogenic bacteria in food products as alternatives to the laborious and time-consuming culture procedures. In this work, an electrochemical immunoassay using iron/gold core/shell nanoparticles (Fe@Au) conjugated with anti-Salmonella antibodies was developed. The chemical synthesis and functionalization of magnetic and gold-coated magnetic nanoparticles is reported. Fe@Au nanoparticles were functionalized with different self-assembled monolayers and characterized using ultraviolet-visible spectrometry, transmission electron microscopy, and voltammetric techniques. The determination of Salmonella typhimurium, on screen-printed carbon electrodes, was performed by square-wave anodic stripping voltammetry through the use of CdS nanocrystals. The calibration curve was established between 1×101 and 1×106 cells/mL and the limit of detection was 13 cells/mL. The developed method showed that it is possible to determine the bacteria in milk at low concentrations and is suitable for the rapid (less than 1 h) and sensitive detection of S. typhimurium in real samples. Therefore, the developed methodology could contribute to the improvement of the quality control of food samples.

The effect of the angle of incidence on the aqueous corrosion of ion implanted M50 steel substrates

Following work on tantalum and chromium implanted flat M50 steel substrates, this work reports on the electrochemical behaviour of M50 steel implanted with tantalum and chromium and the effect of the angle of incidence. Proposed optimum doses for resistance to chloride attack were based on the interpretation of results obtained during long-term and accelerated electrochemical testing. After dose optimization from the corrosion viewpoint, substrates were implanted at different angles of incidence (15°, 30°, 45°, 60°, 75°, 90°) and their susceptibility to localized corrosion assessed using open-circuit measurements, step by step polarization and cyclic voltammetry at several scan rates (5–50 mV s-1). Results showed, for tantalum implanted samples, an ennoblement of the pitting potential of approximately 0.5 V for an angle of incidence of 90°. A retained dose of 5 × 1016 atoms cm-2 was found by depth profiling with Rutherford backscattering spectrometry. The retained dose decreases rapidly with angle of incidence. The breakdown potential varies roughly linearly with the angle of incidence up to 30° falling fast to reach -0.1 V (vs. a saturated calomel electrode (SCE)) for 15°. Chromium was found to behave differently. Maximum corrosion resistance was found for angles of 45°–60° according to current densities and breakdown potentials. Cr+ depth profiles ((p,γ) resonance broadening method), showed that retained doses up to an angle of 60° did not change much from the implanted dose at 90°, 2 × 1017 Cr atoms cm-2. The retained implantation dose for tantalum and chromium was found to follow a (cos θ)8/3 dependence where θ is the angle between the sample normal and the beam direction.

Core group approach to identify college students at risk for sexually transmitted infections

OBJECTIVE: To analyze the core group for sexually transmitted infections (STI) among college students. METHODS: Cross-sectional study carried out in a convenience sample comprising 711 college students of the public university of Morelos, Mexico, between 2001 and 2003. Sociodemographic and sexual behavior information were collected using self-applied questionnaires. Herpes simplex 2 (HSV-2) infection was tested in the blood. The number of sexual partners in the last year and cocaine consumption were used as indicators to construct the dependent variable "level of STI risk" in three categories: low, medium and high risk (core group). A multinomial analysis was conducted to evaluate whether different sex behaviors were associated with the variable "level of STI risk". RESULTS: There was significant association between HSV-2 seroprevalence and the variable "level of STI risk": 13%, 5.6% and 3.8% were found in high (core group), medium and low categories, respectively. There were gender differences regarding the core group. Men started having sexual intercourse earlier, had more sex partners, higher alcohol and drug consumption, higher frequency of sex intercourse with sex workers, exchanging sex for money, occasional and concurrent partners compared to women. CONCLUSIONS: The study findings suggest existing contextual characteristics in the study population that affect their sex behavior. In Mexico, the cultural conception of sexuality is determined mainly by gender differences where men engage in higher risky sexual behavior than women.

Padrão de ativação de músculos do core abdominal e tilt pélvico no teste de extensão da anca, em indivíduos com e sem dor lombo- pélvica

Introdução: Os padrões de movimento podem sofrer alterações por atraso no timing de ativação e/ou modificações na sequência de recrutamento muscular, predispondo o indivíduo a disfunções, nomeadamente a dor lombo-pélvica. Objetivo: Investigar o timing e o padrão de ativação de músculos do core abdominal, durante o movimento de extensão da anca, do membro dominante, em indivíduos com e sem dor lombo- pélvica crónica inespecífica. Pretende-se, também, pesquisar a existência do padrão de ativação considerado “normal“ e verificar a relação entre o padrão de ativação e o tilt pélvico, em ambos os indivíduos. Métodos: Estudo transversal, com 64 estudantes universitários, divididos em dois grupos: 31 sem e 33 com dor lombo-pélvica. Através de eletromiografia de superfície foi recolhida a atividade muscular dos Eretores da Espinha ipsilateral e contralateral, Glúteo Máximo e Bicípite Femoral ipsilaterais. Foi analisado o timing de ativação muscular e as respetivas ordens de ativação. Adicionalmente foi medido o tilt pélvico. Resultados: O grupo com dor lombo-pélvica apresentou um atraso significativo no timing de ativação dos músculos Glúteo Máximo ipsilateral (t=-3,171;p=0,002) e Bicípite Femoral ipsilateral (t=-2,092;p=0,041), em comparação com o grupo sem dor. Verificou-se uma associação significativa entre as 5 ordens de ativação mais frequentes e a presença de dor lombo-pélvica (xf2=11,54;p=0,015). A ordem de ativação "normal" – Glúteo Máximo ipsilateral>Bicípite Femoral ipsilateral>Eretor da Espinha contralateral>Eretor da Espinha ipsilateral – não foi utilizada. Verificou-se que o Bicípite Femoral ipsilateral foi maioritariamente o primeiro a ativar-se e o Glúteo Máximo ipsilateral o último em ambos os grupos. Verificou-se um tilt pélvico significativamente superior nos indivíduos que ativam primeiro o Bicípite Femoral ipsilateral nos grupos com (U=51;p=0,001) e sem dor (U=41p=0,001). Conclusão: Os indivíduos com dor lombo-pélvica apresentaram um atraso no timing de ativação dos músculos do core abdominal. Os resultados parecem refutar a ordem de ativação "normal" que tem sido proposta. Não foi possível apoiar nem contestar a teoria de que um atraso na ativação do Glúteo Máximo está associado com dor lombo-pélvica.

Longitudinal versus polar wrinkling of core-shell fibers with anisotropic size mismatches

We consider a fiber made of a soft elastic material, encased in a stiff elastic shell (core-shell geometry). If the core and shell dimensions are mismatched, e.g., because the core shrinks while the shell does not, but the two remain attached, then an elastic instability is triggered whereby wrinkles may appear on the shell. The wrinkle orientation may be longitudinal (along the fiber axis), polar (along the fiber perimeter), or a mixture of both, depending on the fiber's geometrical and material parameters. Here we investigate under what conditions longitudinal or polar wrinkling will occur.

Simulation of the magnetic induction vector of a magnetic core to be used in FFC NMR relaxometry

This paper is a contribution for the assessment and comparison of magnet properties based on magnetic field characteristics particularly concerning the magnetic induction uniformity in the air gaps. For this aim, a solver was developed and implemented to determine the magnetic field of a magnetic core to be used in Fast Field Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometry. The electromagnetic field computation is based on a 2D finite-element method (FEM) using both the scalar and the vector potential formulation. Results for the magnetic field lines and the magnetic induction vector in the air gap are presented. The target magnetic induction is 0.2 T, which is a typical requirement of the FFC NMR technique, which can be achieved with a magnetic core based on permanent magnets or coils. In addition, this application requires high magnetic induction uniformity. To achieve this goal, a solution including superconducting pieces is analyzed. Results are compared with a different FEM program.

Projeto de fundações e estrutura de colégio em Ponta Delgada utilizando os eurocódigos estruturais

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Estruturas

Many-core approach to 2D-DCT calculation using an FPGA

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Energy-conscious tasks partitioning onto a heterogeneous multi-core platform

Modern multicore processors for the embedded market are often heterogeneous in nature. One feature often available are multiple sleep states with varying transition cost for entering and leaving said sleep states. This research effort explores the energy efficient task-mapping on such a heterogeneous multicore platform to reduce overall energy consumption of the system. This is performed in the context of a partitioned scheduling approach and a very realistic power model, which improves over some of the simplifying assumptions often made in the state-of-the-art. The developed heuristic consists of two phases, in the first phase, tasks are allocated to minimise their active energy consumption, while the second phase trades off a higher active energy consumption for an increased ability to exploit savings through more efficient sleep states. Extensive simulations demonstrate the effectiveness of the approach.

Flexicurity: Core Features of Portuguese Debate

According to the OECD, Portugal is an example of a country with a very high rigidity in the labour market. At the same time, Portugal is an example of a country with a high percentage or workers with short-term contracts. These conditions have led to an ongoing public discussion concerning the nee to introduce more flexibility while maintaining work security. In this paper we analyze the current situation concerning security and rigidity in the labour market and discuss the flexicurity in the Portuguese context.

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm−2. Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm−2, respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.