Käytännön ohjelmointi -kurssin kehittäminen

Tämän tutkimuksen tavoitteena on selvittää opintojensa alussa olevien yliopisto-opiskelijoiden vaikeimpina pitämät käytännön ohjelmoinnin aihealueet sekä koostaa luentomoniste käytettäväksi seuraavalla alkavalla Käytännön ohjelmointi -kurssilla. Tutkimusmetodina käytettiin konstruktiivista tutkimusmetodia, jossa tavoitteen spesifioinnin jälkeen implementoitiin luentomoniste koostamalla määriteltyjen aihekokonaisuuksien lähdemateriaalia yhtenäiseksi, luettavaksi kokonaisuudeksi. Yliopistoissa ei yleisesti opeteta ohjelmistojen testausta ennen syventäviä ohjelmistotekniikan kursseja, mikä on kuitenkin puute työelämän kannalta. Tässä työssä esitetään perusteluja käytännönläheisten aihekokonaisuuksien painottamiselle ohjelmointikursseilla jo yliopisto-opintojen alkuvaiheessa. Työssä käsitellään Käytännön ohjelmointi -kurssin kurssipalautetta, missä havaittiin opiskelijoiden pitävän kurssin hankalimpina aihealueina linkitettyä listaa, osoittimia, dynaamista muistinhallintaa, tietorakenteita ja versionhallintaa. Työn avulla on pyritty kehittämään käytännön ohjelmoinnin yliopisto-opetusta Lappeenrannan teknillisessä yliopistossa luentomateriaalin avulla, jossa on muun muassa teoriaa, keskeisiä opiskelijoiden tarvitsemia komentoja, www-linkkejä sekä ohjelmoinnin tyyliopas.

Software for calculation of reservoir active capacity with the sequent-peak algorithm

It is presented a software developed with Delphi programming language to compute the reservoir's annual regulated active storage, based on the sequent-peak algorithm. Mathematical models used for that purpose generally require extended hydrological series. Usually, the analysis of those series is performed with spreadsheets or graphical representations. Based on that, it was developed a software for calculation of reservoir active capacity. An example calculation is shown by 30-years (from 1977 to 2009) monthly mean flow historical data, from Corrente River, located at São Francisco River Basin, Brazil. As an additional tool, an interface was developed to manage water resources, helping to manipulate data and to point out information that it would be of interest to the user. Moreover, with that interface irrigation districts where water consumption is higher can be analyzed as a function of specific seasonal water demands situations. From a practical application, it is possible to conclude that the program provides the calculation originally proposed. It was designed to keep information organized and retrievable at any time, and to show simulation on seasonal water demands throughout the year, contributing with the elements of study concerning reservoir projects. This program, with its functionality, is an important tool for decision making in the water resources management.

Empirical study on the adoption, use and effects of cloud-based testing

Cloud computing is a practically relevant paradigm in computing today. Testing is one of the distinct areas where cloud computing can be applied. This study addressed the applicability of cloud computing for testing within organizational and strategic contexts. The study focused on issues related to the adoption, use and effects of cloudbased testing. The study applied empirical research methods. The data was collected through interviews with practitioners from 30 organizations and was analysed using the grounded theory method. The research process consisted of four phases. The first phase studied the definitions and perceptions related to cloud-based testing. The second phase observed cloud-based testing in real-life practice. The third phase analysed quality in the context of cloud application development. The fourth phase studied the applicability of cloud computing in the gaming industry. The results showed that cloud computing is relevant and applicable for testing and application development, as well as other areas, e.g., game development. The research identified the benefits, challenges, requirements and effects of cloud-based testing; and formulated a roadmap and strategy for adopting cloud-based testing. The study also explored quality issues in cloud application development. As a special case, the research included a study on applicability of cloud computing in game development. The results can be used by companies to enhance the processes for managing cloudbased testing, evaluating practical cloud-based testing work and assessing the appropriateness of cloud-based testing for specific testing needs.

Cost-benefit analysis of using test automation in the development of embedded software

The goal of this thesis is to make a case study of test automation’s profitability in the development of embedded software in a real industrial setting. The cost-benefit analysis is done by considering the costs and benefits test automation causes to software development, before the software is released to customers. The potential benefits of test automation regarding software quality after customer release were not estimated. Test automation is a significant investment which often requires dedicated resources. When done accordingly, the investment in test automation can produce major cost savings by reducing the need for manual testing effort, especially if the software is developed with an agile development framework. It can reduce the cost of avoidable rework of software development, as test automation enables the detection of construction time defects in the earliest possible moment. Test automation also has many pitfalls such as test maintainability and testability of the software, and if those areas are neglected, the investment in test automation may become worthless or it may even produce negative results. The results of this thesis suggest that test automation is very profitable at the company under study.

Software development methods and quality assurance: Special focus on South Korea

The purpose of this study was to explore software development methods and quality assurance practices used by South Korean software industry. Empirical data was collected by conducting a survey that focused on three main parts: software life cycle models and methods, software quality assurance including quality standards, the strengths and weaknesses of South Korean software industry. The results of the completed survey showed that the use of agile methods is slightly surpassing the use of traditional software development methods. The survey also revealed an interesting result that almost half of the South Korean companies do not use any software quality assurance plan in their projects. For the state of South Korean software industry large number of the respondents thought that despite of the weakness, the status of software development in South Korea will improve in the future.

Empirical studies on software quality construction: Exploring human factors and organizational influences

Software quality has become an important research subject, not only in the Information and Communication Technology spheres, but also in other industries at large where software is applied. Software quality is not a happenstance; it is defined, planned and created into the software product throughout the Software Development Life Cycle. The research objective of this study is to investigate the roles of human and organizational factors that influence software quality construction. The study employs the Straussian grounded theory. The empirical data has been collected from 13 software companies, and the data includes 40 interviews. The results of the study suggest that tools, infrastructure and other resources have a positive impact on software quality, but human factors involved in the software development processes will determine the quality of the products developed. On the other hand, methods of development were found to bring little effect on software quality. The research suggests that software quality is an information-intensive process whereby organizational structures, mode of operation, and information flow within the company variably affect software quality. The results also suggest that software development managers influence the productivity of developers and the quality of the software products. Several challenges of software testing that affect software quality are also brought to light. The findings of this research are expected to benefit the academic community and software practitioners by providing an insight into the issues pertaining to software quality construction undertakings.

The functional fit between collaborative software and work systems:Qualification of work system needs to software functionality

The study develops an approach that tries to validate software functionality to work systems needs in SMEs. The formulated approach is constructed by using a SAAS based software i.e., work collaboration service (WCS), and SMEs as the elements of study. Where the WCS’s functionality is qualified to the collaboration needs that exist in operational and project work within SMEs. For this research constructivist approach and case study method is selected because the nature of the current study requires an in depth study of the work collaboration service as well as a detailed study of the work systems within different enterprises. Four different companies are selected in which fourteen interviews are conducted to gather data pertaining. The work systems method and framework are used as a central part of the approach to collect, analyze and interpret the enterprises work systems model and the underlying collaboration needs on operational and project work. On the other hand, the functional model of the WCS and its functionality is determined from functional model analysis, software testing, documentation and meetings with the service vendor. The enterprise work system model and the WCS model are compared to reveal how work progression differs between the two and make visible unaddressed stages of work progression. The WCS functionality is compared to work systems collaboration needs to ascertain if the service will suffice the needs of the project and operational work under study. The unaddressed needs provide opportunities to improve the functionality of the service for better conformity to the needs of enterprise and work. The results revealed that the functional models actually differed in how operational and project work progressed within the stages. WCS shared similar stages of work progression apart from the stages of identification and acceptance, and progress and completion stages were only partially addressed. Conclusion is that the identified unaddressed needs such as, single point of reference, SLA and OLA inclusion etc., should be implemented or improved within the WCS at appropriate stages of work to gain better compliance of the service to the needs of the enterprise an work itself. The developed approach can hence be used to carry out similar analysis for the conformance of pre-built software functionality to work system needs with SMEs.

Automated UI testing. WBCT, a computer-automated user test environment tool.

Today, the user experience and usability in software application are becoming a major design issue due to the adaptation of many processes using new technologies. Therefore, the study of the user experience and usability might be included in every software development project and, thus, they should be tested to get traceable results. As a result of different testing methods to evaluate the concepts, a non-expert on the topic might have doubts on which option he/she should opt for and how to interpret the outcomes of the process. This work aims to create a process to ease the whole testing methodology based on the process created by Seffah et al. and a supporting software tool to follow the procedure of these testing methods for the user experience and usability.

Timing verification in transaction modeling

Les systèmes Matériels/Logiciels deviennent indispensables dans tous les aspects de la vie quotidienne. La présence croissante de ces systèmes dans les différents produits et services incite à trouver des méthodes pour les développer efficacement. Mais une conception efficace de ces systèmes est limitée par plusieurs facteurs, certains d'entre eux sont: la complexité croissante des applications, une augmentation de la densité d'intégration, la nature hétérogène des produits et services, la diminution de temps d’accès au marché. Une modélisation transactionnelle (TLM) est considérée comme un paradigme prometteur permettant de gérer la complexité de conception et fournissant des moyens d’exploration et de validation d'alternatives de conception à des niveaux d’abstraction élevés. Cette recherche propose une méthodologie d’expression de temps dans TLM basée sur une analyse de contraintes temporelles. Nous proposons d'utiliser une combinaison de deux paradigmes de développement pour accélérer la conception: le TLM d'une part et une méthodologie d’expression de temps entre différentes transactions d’autre part. Cette synergie nous permet de combiner dans un seul environnement des méthodes de simulation performantes et des méthodes analytiques formelles. Nous avons proposé un nouvel algorithme de vérification temporelle basé sur la procédure de linéarisation des contraintes de type min/max et une technique d'optimisation afin d'améliorer l'efficacité de l'algorithme. Nous avons complété la description mathématique de tous les types de contraintes présentées dans la littérature. Nous avons développé des méthodes d'exploration et raffinement de système de communication qui nous a permis d'utiliser les algorithmes de vérification temporelle à différents niveaux TLM. Comme il existe plusieurs définitions du TLM, dans le cadre de notre recherche, nous avons défini une méthodologie de spécification et simulation pour des systèmes Matériel/Logiciel basée sur le paradigme de TLM. Dans cette méthodologie plusieurs concepts de modélisation peuvent être considérés séparément. Basée sur l'utilisation des technologies modernes de génie logiciel telles que XML, XSLT, XSD, la programmation orientée objet et plusieurs autres fournies par l’environnement .Net, la méthodologie proposée présente une approche qui rend possible une réutilisation des modèles intermédiaires afin de faire face à la contrainte de temps d’accès au marché. Elle fournit une approche générale dans la modélisation du système qui sépare les différents aspects de conception tels que des modèles de calculs utilisés pour décrire le système à des niveaux d’abstraction multiples. En conséquence, dans le modèle du système nous pouvons clairement identifier la fonctionnalité du système sans les détails reliés aux plateformes de développement et ceci mènera à améliorer la "portabilité" du modèle d'application.

Identification et localisation des préoccupations fonctionnelles dans un code légataire Java

Traditionnellement, les applications orientées objets légataires intègrent différents aspects fonctionnels. Ces aspects peuvent être dispersés partout dans le code. Il existe différents types d’aspects : • des aspects qui représentent des fonctionnalités métiers ; • des aspects qui répondent à des exigences non fonctionnelles ou à d’autres considérations de conception comme la robustesse, la distribution, la sécurité, etc. Généralement, le code qui représente ces aspects chevauche plusieurs hiérarchies de classes. Plusieurs chercheurs se sont intéressés à la problématique de la modularisation de ces aspects dans le code : programmation orientée sujets, programmation orientée aspects et programmation orientée vues. Toutes ces méthodes proposent des techniques et des outils pour concevoir des applications orientées objets sous forme de composition de fragments de code qui répondent à différents aspects. La séparation des aspects dans le code a des avantages au niveau de la réutilisation et de la maintenance. Ainsi, il est important d’identifier et de localiser ces aspects dans du code légataire orienté objets. Nous nous intéressons particulièrement aux aspects fonctionnels. En supposant que le code qui répond à un aspect fonctionnel ou fonctionnalité exhibe une certaine cohésion fonctionnelle (dépendances entre les éléments), nous proposons d’identifier de telles fonctionnalités à partir du code. L’idée est d’identifier, en l’absence des paradigmes de la programmation par aspects, les techniques qui permettent l’implémentation des différents aspects fonctionnels dans un code objet. Notre approche consiste à : • identifier les techniques utilisées par les développeurs pour intégrer une fonctionnalité en l’absence des techniques orientées aspects • caractériser l’empreinte de ces techniques sur le code • et développer des outils pour identifier ces empreintes. Ainsi, nous présentons deux approches pour l’identification des fonctionnalités existantes dans du code orienté objets. La première identifie différents patrons de conception qui permettent l’intégration de ces fonctionnalités dans le code. La deuxième utilise l’analyse formelle de concepts pour identifier les fonctionnalités récurrentes dans le code. Nous expérimentons nos deux approches sur des systèmes libres orientés objets pour identifier les différentes fonctionnalités dans le code. Les résultats obtenus montrent l’efficacité de nos approches pour identifier les différentes fonctionnalités dans du code légataire orienté objets et permettent de suggérer des cas de refactorisation.

Desenvolupament d’una biblioteca per a la generació de diagrames vectorials basat en l’entorn gràfic de JAVA2D i aplicació d’aquesta biblioteca per a la implementació d’una eina per al desenvolupament de diagrames d’E/R

En aquest projecte es vol implementar una llibreria en Java, que proporcioni les eines necessàries per a crear diagrames i esquemes. Es vol proporcionar a la llibreria un conjunt d’objectes bàsics, també mètodes i funcionalitats suficients per a gestionar aquests objectes. Per altra part, es vol implementar una aplicació per a dissenyar diagrames Entitat-Relació que utilitzi aquesta llibreria

Model-based objects recognition in man-made environments

We describe a model-based objects recognition system which is part of an image interpretation system intended to assist autonomous vehicles navigation. The system is intended to operate in man-made environments. Behavior-based navigation of autonomous vehicles involves the recognition of navigable areas and the potential obstacles. The recognition system integrates color, shape and texture information together with the location of the vanishing point. The recognition process starts from some prior scene knowledge, that is, a generic model of the expected scene and the potential objects. The recognition system constitutes an approach where different low-level vision techniques extract a multitude of image descriptors which are then analyzed using a rule-based reasoning system to interpret the image content. This system has been implemented using CEES, the C++ embedded expert system shell developed in the Systems Engineering and Automatic Control Laboratory (University of Girona) as a specific rule-based problem solving tool. It has been especially conceived for supporting cooperative expert systems, and uses the object oriented programming paradigm

Programming Principles: Super and Sub-classes

In this session we introduce inheritance - one of the cornerstone concepts of object oriented programming. We look at how to define super and sub-classes, how to maintain encapsulation using the super() constructor, and why it is useful to use substitution to hold references to sub-classes in references typed as their super-class.

Dynamic programming for stochastic target problems, Viscosity solutions and hedging in markets with Portfolio constraints and large investors

The purpose of this expository arti le is to present a self- ontained overview of some results on the hara terization of the optimal value fun tion of a sto hasti target problem as (dis ontinuous) vis osity solution of a ertain dynami programming PDE and its appli ation to the problem of hedging ontingent laims in the presen e of portfolio onstraints and large investors

The effectiveness of assessment learning objects produced using pair programming

Pair Programming is a technique from the software development method eXtreme Programming (XP) whereby two programmers work closely together to develop a piece of software. A similar approach has been used to develop a set of Assessment Learning Objects (ALO). Three members of academic staff have developed a set of ALOs for a total of three different modules (two with overlapping content). In each case a pair programming approach was taken to the development of the ALO. In addition to demonstrating the efficiency of this approach in terms of staff time spent developing the ALOs, a statistical analysis of the outcomes for students who made use of the ALOs is used to demonstrate the effectiveness of the ALOs produced via this method.