BPM software and process modelling languages in practice

IT has turned out to be a key factor for the purposes of gaining maturity in Business Process Management (BPM). This book presents a worldwide investigation that was conducted among companies from the ‘Forbes Global 2000’ list to explore the current usage of software throughout the BPM life cycle and to identify the companies’ requirements concerning process modelling. The responses from 130 companies indicate that, at the present time, it is mainly software for process description and analysis that is required, while process execution is supported by general software such as databases, ERP systems and office tools. The resulting complex system landscapes give rise to distinct requirements for BPM software, while the process modelling requirements can be equally satisfied by the most common languages (BPMN, UML, EPC).

Dynamics of governance and control in inter-organizational software development

In recent years, development of information systems (IS) has rapidly changed towards increasing division of labor between firms. Two trends are emerging. First, client companies increasingly outsource software development to external service providers. Second, the formerly oligopolistic enterprise application software industry has started to disintegrate into focal partnership networks – so called platform ecosystems. Despite the increasing prominence of IS outsourcing and platform ecosystems, many of these inter-organizational partnerships fail to achieve expected benefits. Ineffective governance and control frequently plays a pivotal role in producing these failures. While designing effective governance and control mechanisms is always challenging, inter-organizational software development projects are often business-critical and exhibit additional dynamics and uncertainty. As a consequence governance and control have to be adapted over time. The three research projects included in this book provide a better understanding of how and why governance and control can be effectively adapted over time. The implications for successful management of inter-organizational software development projects are highly relevant for theory and practice.

Software Development in the Cloud: Exploring the Affordances of Platform-as-a-Service

Software development teams increasingly adopt platform-as-a-service (PaaS), i.e., cloud services that make software development infrastructure available over the internet. Yet, empirical evidence of whether and how software development work changes with the use of PaaS is difficult to find. We performed a grounded-theory study to explore the affordances of PaaS for software development teams. We find that PaaS enables software development teams to enforce uniformity, to exploit knowledge embedded in technology, to enhance agility, and to enrich jobs. These affordances do not arise in a vacuum. Their emergence is closely interwoven with changes in methodologies, roles, and norms that give rise to self-organizing, loosely coupled teams. Our study provides rich descriptions of PaaS-based software development and an emerging theory of affordances of PaaS for software development teams.

Sampling in Open Source Software Development: The case for using the Debian GNUILinux Distribution

Research on open source software (OSS) projects often focuses on the SourceForge collaboration platform. We argue that a GNU/Linwr distribution, such as Debian, is better suited for the sampling ofprojects because it avoids biases and contains unique information only available in an integrated environment. Especially research on the reuse of components can build on dependency information inherent in the Debian GNU/Linux packaging system. This paper therefore contributes to the practice of sampling methods in OSS research and provides empirical data on reuse dependencies in Debian.

'Reform' of the British national health service after the election of a labour government: Understanding the policy development process

The policy development process leading to the Labour government's white paper of December 1997—The new NHS: Modern, Dependable—is the focus of this project and the public policy development literature is used to aid in the understanding of this process. Policy makers who had been involved in the development of the white paper were interviewed in order to acquire a thorough understanding of who was involved in this process and how they produced the white paper. A theoretical framework is used that sorts policy development models into those that focus on knowledge and experience, and those which focus on politics and influence. This framework is central to understanding the evidence gathered from the individuals and associations that participated in this policy development process. The main research question to be asked in this project is to what extent do either of these sets of policy development models aid in understanding and explicating the process by which the Labour government's policies were developed. The interview evidence, along with published evidence, show that a clear pattern of policy change emerged from this policy development process, and the Knowledge-Experience and Politics-Influence policy making models both assist in understanding this process. The early stages of the policy development process were characterized as hierarchical and iterative, yet also very collaborative among those participating, with knowledge and experience being quite prevalent. At every point in the process, however, informal networks of political influence were used and noted to be quite prevalent by all of the individuals interviewed. The later stages of the process then became increasingly noninclusive, with decisions made by a select group of internal and external policy makers. These policy making models became an important tool with which to understand the policy development process. This Knowledge-Experience and Politics-Influence dichotomy of policy development models could therefore be useful in analyzing other types of policy development. ^

Managing software development information in global configuration management activities

Software Configuration Management (SCM) techniques have been considered the entry point to rigorous software engineering, where multiple organizations cooperate in a decentralized mode to save resources, ensure the quality of the diversity of software products, and manage corporate information to get a better return of investment. The incessant trend of Global Software Development (GSD) and the complexity of implementing a correct SCM solution grow not only because of the changing circumstances, but also because of the interactions and the forces related to GSD activities. This paper addresses the role SCM plays in the development of commercial products and systems, and introduces a SCM reference model to describe the relationships between the different technical, organizational, and product concerns any software development company should support in the global market.

Estudio de la fiabilidad software, según defectos, en controladores de velocidad para robots autónomos móviles

Tanto los robots autónomos móviles como los robots móviles remotamente operados se utilizan con éxito actualmente en un gran número de ámbitos, algunos de los cuales son tan dispares como la limpieza en el hogar, movimiento de productos en almacenes o la exploración espacial. Sin embargo, es difícil garantizar la ausencia de defectos en los programas que controlan dichos dispositivos, al igual que ocurre en otros sectores informáticos. Existen diferentes alternativas para medir la calidad de un sistema en el desempeño de las funciones para las que fue diseñado, siendo una de ellas la fiabilidad. En el caso de la mayoría de los sistemas físicos se detecta una degradación en la fiabilidad a medida que el sistema envejece. Esto es debido generalmente a efectos de desgaste. En el caso de los sistemas software esto no suele ocurrir, ya que los defectos que existen en ellos generalmente no han sido adquiridos con el paso del tiempo, sino que han sido insertados en el proceso de desarrollo de los mismos. Si dentro del proceso de generación de un sistema software se focaliza la atención en la etapa de codificación, podría plantearse un estudio que tratara de determinar la fiabilidad de distintos algoritmos, válidos para desempeñar el mismo cometido, según los posibles defectos que pudieran introducir los programadores. Este estudio básico podría tener diferentes aplicaciones, como por ejemplo elegir el algoritmo menos sensible a los defectos, para el desarrollo de un sistema crítico o establecer procedimientos de verificación y validación, más exigentes, si existe la necesidad de utilizar un algoritmo que tenga una alta sensibilidad a los defectos. En el presente trabajo de investigación se ha estudiado la influencia que tienen determinados tipos de defectos software en la fiabilidad de tres controladores de velocidad multivariable (PID, Fuzzy y LQR) al actuar en un robot móvil específico. La hipótesis planteada es que los controladores estudiados ofrecen distinta fiabilidad al verse afectados por similares patrones de defectos, lo cual ha sido confirmado por los resultados obtenidos. Desde el punto de vista de la planificación experimental, en primer lugar se realizaron los ensayos necesarios para determinar si los controladores de una misma familia (PID, Fuzzy o LQR) ofrecían una fiabilidad similar, bajo las mismas condiciones experimentales. Una vez confirmado este extremo, se eligió de forma aleatoria un representante de clase de cada familia de controladores, para efectuar una batería de pruebas más exhaustiva, con el objeto de obtener datos que permitieran comparar de una forma más completa la fiabilidad de los controladores bajo estudio. Ante la imposibilidad de realizar un elevado número de pruebas con un robot real, así como para evitar daños en un dispositivo que generalmente tiene un coste significativo, ha sido necesario construir un simulador multicomputador del robot. Dicho simulador ha sido utilizado tanto en las actividades de obtención de controladores bien ajustados, como en la realización de los diferentes ensayos necesarios para el experimento de fiabilidad. ABSTRACT Autonomous mobile robots and remotely operated robots are used successfully in very diverse scenarios, such as home cleaning, movement of goods in warehouses or space exploration. However, it is difficult to ensure the absence of defects in programs controlling these devices, as it happens in most computer sectors. There exist different quality measures of a system when performing the functions for which it was designed, among them, reliability. For most physical systems, a degradation occurs as the system ages. This is generally due to the wear effect. In software systems, this does not usually happen, and defects often come from system development and not from use. Let us assume that we focus on the coding stage in the software development pro¬cess. We could consider a study to find out the reliability of different and equally valid algorithms, taking into account any flaws that programmers may introduce. This basic study may have several applications, such as choosing the algorithm less sensitive to pro¬gramming defects for the development of a critical system. We could also establish more demanding procedures for verification and validation if we need an algorithm with high sensitivity to programming defects. In this thesis, we studied the influence of certain types of software defects in the reliability of three multivariable speed controllers (PID, Fuzzy and LQR) designed to work in a specific mobile robot. The hypothesis is that similar defect patterns affect differently the reliability of controllers, and it has been confirmed by the results. From the viewpoint of experimental planning, we followed these steps. First, we conducted the necessary test to determine if controllers of the same family (PID, Fuzzy or LQR) offered a similar reliability under the same experimental conditions. Then, a class representative was chosen at ramdom within each controller family to perform a more comprehensive test set, with the purpose of getting data to compare more extensively the reliability of the controllers under study. The impossibility of performing a large number of tests with a real robot and the need to prevent the damage of a device with a significant cost, lead us to construct a multicomputer robot simulator. This simulator has been used to obtain well adjusted controllers and to carry out the required reliability experiments.

Analysis of WCET in an experimental satellite software development.

This paper describes a case study in WCET analysis of an on-board spacecraft software system. The attitude control system of UPMSat-2, an experimental micro-satellite which is scheduled to be launched in 2013, is used for an experiment on analysing the worst-case execution time of code automatically generated from a Simulink model. In order to properly test the code, a hardware-in-the-loop configuration with a simulation model of the spacecraft environment has been used as a test bench. The code has been analysed with RapiTime, with some modifications to the original instrumentation routines, in order to take into account the particularities of the test configuration. Results from the experiment are described and commented in the paper.

Qualitative operational risk software -development of a software tool for determining the root of operational risk

This article shows software that allows determining the statistical behavior of qualitative data originating surveys previously transformed with a Likert’s scale to quantitative data. The main intention is offer to users a useful tool to know statistics' characteristics and forecasts of financial risks in a fast and simple way. Additionally,this paper presents the definition of operational risk. On the other hand, the article explains different techniques to do surveys with a Likert’s scale (Avila, 2008) to know expert’s opinion with the transformation of qualitative data to quantitative data. In addition, this paper will show how is very easy to distinguish an expert’s opinion related to risk, but when users have a lot of surveys and matrices is very difficult to obtain results because is necessary to compare common data. On the other hand, statistical value representative must be extracted from common data to get weight of each risk. In the end, this article exposes the development of “Qualitative Operational Risk Software” or QORS by its acronym, which has been designed to determine the root of risks in organizations and its value at operational risk OpVaR (Jorion, 2008; Chernobai et al, 2008) when input data comes from expert’s opinion and their associated matrices.

Including functional usability features in a Model-Driven Development Method

The Software Engineering (SE) community has historically focused on working with models to represent functionality and persistence, pushing interaction modelling into the background, which has been covered by the Human Computer Interaction (HCI) community. Recently, adequately modelling interaction, and specifically usability, is being considered as a key factor for success in user acceptance, making the integration of the SE and HCI communities more necessary. If we focus on the Model-Driven Development (MDD) paradigm, we notice that there is a lack of proposals to deal with usability features from the very first steps of software development process. In general, usability features are manually implemented once the code has been generated from models. This contradicts the MDD paradigm, which claims that all the analysts? effort must be focused on building models, and the code generation is relegated to model to code transformations. Moreover, usability features related to functionality may involve important changes in the system architecture if they are not considered from the early steps. We state that these usability features related to functionality can be represented abstractly in a conceptual model, and their implementation can be carried out automatically.

The Role of Knowledge Modeling Techniques in Software Development: A General Approach Based on a Knowledge Management Tool

The aim of the paper is to discuss the use of knowledge models to formulate general applications. First, the paper presents the recent evolution of the software field where increasing attention is paid to conceptual modeling. Then, the current state of knowledge modeling techniques is described where increased reliability is available through the modern knowledge acquisition techniques and supporting tools. The KSM (Knowledge Structure Manager) tool is described next. First, the concept of knowledge area is introduced as a building block where methods to perform a collection of tasks are included together with the bodies of knowledge providing the basic methods to perform the basic tasks. Then, the CONCEL language to define vocabularies of domains and the LINK language for methods formulation are introduced. Finally, the object oriented implementation of a knowledge area is described and a general methodology for application design and maintenance supported by KSM is proposed. To illustrate the concepts and methods, an example of system for intelligent traffic management in a road network is described. This example is followed by a proposal of generalization for reuse of the resulting architecture. Finally, some concluding comments are proposed about the feasibility of using the knowledge modeling tools and methods for general application design.

Diseño de una metodología CASE de desarrollo de software

En la actualidad existe una gran expectación ante la introducción de nuevas herramientas y métodos para el desarrollo de productos software, que permitirán en un futuro próximo un planteamiento de ingeniería del proceso de producción software. Las nuevas metodologías que empiezan a esbozarse suponen un enfoque integral del problema abarcando todas las fases del esquema productivo. Sin embargo el grado de automatización conseguido en el proceso de construcción de sistemas es muy bajo y éste está centrado en las últimas fases del ciclo de vida del software, consiguiéndose así una reducción poco significativa de sus costes y, lo que es aún más importante, sin garantizar la calidad de los productos software obtenidos. Esta tesis define una metodología de desarrollo software estructurada que se puede automatizar, es decir una metodología CASE. La metodología que se presenta se ajusta al modelo de ciclo de desarrollo CASE, que consta de las fases de análisis, diseño y pruebas; siendo su ámbito de aplicación los sistemas de información. Se establecen inicialmente los principios básicos sobre los que la metodología CASE se asienta. Posteriormente, y puesto que la metodología se inicia con la fijación de los objetivos de la empresa que demanda un sistema informático, se emplean técnicas que sirvan de recogida y validación de la información, que proporcionan a la vez un lenguaje de comunicación fácil entre usuarios finales e informáticos. Además, estas mismas técnicas detallarán de una manera completa, consistente y sin ambigüedad todos los requisitos del sistema. Asimismo, se presentan un conjunto de técnicas y algoritmos para conseguir que desde la especificación de requisitos del sistema se logre una automatización tanto del diseño lógico del Modelo de Procesos como del Modelo de Datos, validados ambos conforme a la especificación de requisitos previa. Por último se definen unos procedimientos formales que indican el conjunto de actividades a realizar en el proceso de construcción y cómo llevarlas a cabo, consiguiendo de esta manera una integridad en las distintas etapas del proceso de desarrollo.---ABSTRACT---Nowdays there is a great expectation with regard to the introduction of new tools and methods for the software products development that, in the very near future will allow, an engineering approach in the software development process. New methodologies, just emerging, imply an integral approach to the problem, including all the productive scheme stages. However, the automatization degree obtained in the systems construction process is very low and focused on the last phases of the software lifecycle, which means that the costs reduction obtained is irrelevant and, which is more important, the quality of the software products is not guaranteed. This thesis defines an structured software development methodology that can be automated, that is a CASE methodology. Such a methodology is adapted to the CASE development cycle-model, which consists in analysis, design and testing phases, being the information systems its field of application. Firstly, we present the basic principies on which CASE methodology is based. Secondly, since the methodology starts from fixing the objectives of the company demanding the automatization system, we use some techniques that are useful for gathering and validating the information, being at the same time an easy communication language between end-users and developers. Indeed, these same techniques will detail completely, consistently and non ambiguously all the system requirements. Likewise, a set of techniques and algorithms are shown in order to obtain, from the system requirements specification, an automatization of the Process Model logical design, and of the Data Model logical design. Those two models are validated according to the previous requirement specification. Finally, we define several formal procedures that suggest which set of activities to be accomplished in the construction process, and how to carry them out, getting in this way integrity and completness for the different stages of the development process.

Experience in spacecraft on-board software development

This paper describes some important aspects of high- integrity software development based on the authors' work. Current group research is oriented towards mixed- criticality partitioned systems, development tools, real- time kernels, and language features. The UPMSat-2 satellite software is being used as technology demonstra- tor and a case study for the assessment of the research results. The flight software that will run on the satellite is based on proven technology, such as GNAT/ORK+ and LEON3. There is an experimental version that is being built using a partitioned approach, aiming at assessing a toolset targeting partitioned multi-core em- bedded systems. The singularities of both approaches are discussed, as well as some of the tools that are being used for developing the software.

Study and analysis of the Leap Motion sensor and the Software Development Kit (SDK) for the implementation of visual Human Computer Interfaces

En este proyecto, se presenta un informe técnico sobre la cámara Leap Motion y el Software Development Kit correspondiente, el cual es un dispositivo con una cámara de profundidad orientada a interfaces hombre-máquina. Esto es realizado con el propósito de desarrollar una interfaz hombre-máquina basada en un sistema de reconocimiento de gestos de manos. Después de un exhaustivo estudio de la cámara Leap Motion, se han realizado diversos programas de ejemplo con la intención de verificar las capacidades descritas en el informe técnico, poniendo a prueba la Application Programming Interface y evaluando la precisión de las diferentes medidas obtenidas sobre los datos de la cámara. Finalmente, se desarrolla un prototipo de un sistema de reconocimiento de gestos. Los datos sobre la posición y orientación de la punta de los dedos obtenidos de la Leap Motion son usados para describir un gesto mediante un vector descriptor, el cual es enviado a una Máquina Vectores Soporte, utilizada como clasificador multi-clase.