Otimizando vibrações sísmicas em estruturas através de controles híbridos

Pós-graduação em Engenharia Mecânica - FEIS

Controlador de temperatura para célula de medição de propriedades de líquidos por ultrassom

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do tempo de resposta de um controlador de fluxo com DGPS submetido à variação de velocidade de voo em condições de voo simulado em laboratório

The application of pesticides is one of the most important steps in the agricultural production process. The spray volume can directly affect application success, and this parameter is directly dependent on the displacement speed of the sprayer. In conventional systems, the operator has to maintain a constant speed to ensure uniform application along the tracks. In order to improve over application quality and preserve levels of precision for applied doses; the use of electronic flow control systems allows for automatic adjustment of volume applied over the area when there is a change in velocity during application. The objective of this research was to study the response times of a flow controller with DGPS for aerial application subjected to variations of velocity in laboratory simulated flight conditions. For this purpose, a bench test has been developed including software for simulating DGPS signals, which was used to simulate different flight speeds and conditions. The results showed the average response time from the flow controller to a change in velocity to be between 6 and 20 seconds. Variations in total flow and the controller setting had a significant influence on response time with situations where there was interaction between the factors being evaluated. There was a tendency for better response times using a constant setting for the control algorithm other than that specified by the manufacturer. The flow controller presented an average error rates below 2% in all evaluated operating conditions, providing satisfactory accuracy in determining the output of product in different test situations.

A judicialização da política: o poder judiciário e a definição de políticas nacionais

O papel desempenhado pelo Poder Judiciário nos mais diversos Estados passa por sensível evolução ao longo do século XX, à medida que se desenvolveram os sistemas de controle de constitucionalidade. De um lado, os atores políticos assumem especial importância nesse processo. Os modelos de revisão judicial foram reforçados, no mais das vezes, em paralelo à positivação, em âmbito constitucional, de um amplo rol de direitos fundamentais e de princípios balizadores e limitadores do poder estatal. Com isso, os elementos cotejados no processo legislativo de tomada de decisões políticas são revestidos de status constitucional e transportados para o discurso argumentativo do Direito, o que leva a um processo de judicialização da Política que permite que a atividade legiferante seja passível de confronto perante instâncias judiciárias. Os instrumentos de controle de constitucionalidade assumem, assim, novos contornos, permitindo que o Judiciário interfira no conteúdo das escolhas políticas feitas pela maioria governante. De outro lado, o Poder Judiciário particularmente as Cortes Constitucionais passa a assumir a corresponsabilidade na efetivação das metas e compromissos estatais, com o que desenvolve uma política institucional mais proativa e comprometida com a concretização substancial de valores democráticos, interferindo, assim, de maneira mais incisiva e rígida no controle do processo político. A definição de políticas fundamentais e o processo legiferante passam a contar com constante participação do Judiciário. Na realidade brasileira, a Constituição de 1988 amplia as competência do Supremo Tribunal Federal em sede de controle de constitucionalidade, inserindo o órgão de maneira efetiva nesse contexto de intervenção judicial na Política. A última década, por sua vez, marcou uma perceptível mudança em sua atividade e em sua interferência no processo de tomada de decisões políticas pelos demais Poderes. Valendo-se dos diversos instrumentos de controle que lhe são disponibilizados, assumiu o compromisso de participar na efetivação dos preceitos constitucionais pátrios mediante a revisão do conteúdo normativo decorrente das escolhas políticas tomadas em outras instâncias. Desse modo, tornou-se verdadeiro copartícipe do processo de definição de políticas legislativas nacionais, seja rechaçando normas que repute inconstitucionais, seja proferindo decisões com claros efeitos normativos que buscam readequar e conformar as escolhas dos atores políticos. Nesse processo decisório, entra em jogo a intensidade com que a Corte busca impor sua visão e suas concepções no tocante à efetivação e concretização dos compromissos constitucionais. A sobreposição de ponderações judiciais e legislativas acarreta, a seu turno, importantes efeitos sistêmicos ao diálogo interinstitucional que se desenvolve entre os Poderes, em especial no que concerne à distribuição das funções estatais dentro das premissas democráticas e ao dimensionamento do papel que compete a cada um dos Poderes no processo de efetivação e proteção da Constituição.

Unidade microcontroladora para gerenciamento eletrônico de um motor de combustão interna ciclo Otto.

Nas últimas décadas, a indústria automobilística mundial vem investindo no desenvolvimento tecnológico dos motores, com o objetivo de alcançar melhor eficiência energética e atender às legislações que limitam a quantidade de resíduos tóxicos nos gases de exaustão e menor consumo de combustível. Isso resultou na implantação dos sistemas de gerenciamento eletrônico do motor, que possibilitam funcionalidades para se controlar diversas variáveis do motor, aumentando consideravelmente o rendimento do motor. Este trabalho tem como objetivos explorar a dinâmica de um motor de combustão interna ciclo Otto, os sinais elétricos associados, e os componentes de seu gerenciamento eletrônico. A partir dessas informações, o trabalho apresenta o processo de analise dos sinais elétricos e as estratégias de controle utilizadas em um sistema de gerenciamento real. Assim, são desenvolvidos o hardware e o firmware de uma unidade microcontroladora para gerenciamento eletrônico do motor. O hardware foi elaborado com uma concepção centralizada, ou seja, foi usado apenas um microcontrolador de 32-bit para gerenciar todas as funções. O firmware de controle foi desenvolvido de forma modular baseado em modelos de malha fechada. O modelo matemático do motor foi identificado utilizando técnicas de controle em um veículo real, e a avalidação do modelo foi obtida através de testes em um dinamômetro inercial.

A contribution on modeling methodologies for multibody systems.

Multibody System Dynamics has been responsible for revolutionizing Mechanical Engineering Design by using mathematical models to simulate and optimize the dynamic behavior of a wide range of mechanical systems. These mathematical models not only can provide valuable informations about a system that could otherwise be obtained only by experiments with prototypes, but also have been responsible for the development of many model-based control systems. This work represents a contribution for dynamic modeling of multibody mechanical systems by developing a novel recursive modular methodology that unifies the main contributions of several Classical Mechanics formalisms. The reason for proposing such a methodology is to motivate the implementation of computational routines for modeling complex multibody mechanical systems without being dependent on closed source software and, consequently, to contribute for the teaching of Multibody System Dynamics in undergraduate and graduate levels. All the theoretical developments are based on and motivated by a critical literature review, leading to a general matrix form of the dynamic equations of motion of a multibody mechanical system (that can be expressed in terms of any set of variables adopted for the description of motions performed by the system, even if such a set includes redundant variables) and to a general recursive methodology for obtaining mathematical models of complex systems given a set of equations describing the dynamics of each of its uncoupled subsystems and another set describing the constraints among these subsystems in the assembled system. This work also includes some discussions on the description of motion (using any possible set of motion variables and admitting any kind of constraint that can be expressed by an invariant), and on the conditions for solving forward and inverse dynamics problems given a mathematical model of a multibody system. Finally, some examples of computational packages based on the novel methodology, along with some case studies, are presented, highlighting the contributions that can be achieved by using the proposed methodology.

Algebraic derivative estimation applied to nonlinear control of magnetic levitation.

The subject of this thesis is the real-time implementation of algebraic derivative estimators as observers in nonlinear control of magnetic levitation systems. These estimators are based on operational calculus and implemented as FIR filters, resulting on a feasible real-time implementation. The algebraic method provide a fast, non-asymptotic state estimation. For the magnetic levitation systems, the algebraic estimators may replace the standard asymptotic observers assuring very good performance and robustness. To validate the estimators as observers in closed-loop control, several nonlinear controllers are proposed and implemented in a experimental magnetic levitation prototype. The results show an excellent performance of the proposed control laws together with the algebraic estimators.

Proposta de metodologia para diagnóstico técnico da iluminação pública.

A Iluminação Pública (IP) está num momento de profundas mudanças, principalmente com a popularização da tecnologia LED e dos sistemas de controle a distância. O gestor de serviços públicos precisa conhecer a complexidade do uso final da IP para que possa gerir esse ativo direcionado às necessidades dos usuários, tendo em vista o dinamismo de evolução diária dos centros urbanos. Este estudo tem por objetivo desenvolver uma metodologia que permite levantar, cadastrar, diagnosticar e avaliar, o parque de IP existente em ambientes urbanos. Tem como questão de pesquisa: Como prover os gestores de serviços públicos de conhecimento da situação dos ativos de IP? Trata-se de uma pesquisa observacional e descritiva, desenvolvida em uma região que compreende uma área de 26,5 km², com uma população de 344.632 habitantes, localizada em uma região metropolitana brasileira. A metodologia aplicada divide-se em dois momentos: pesquisa documental e de campo. Inicia-se com um levantamento de documentações a respeito da vida pregressa do acervo, disponíveis nos escritórios da Concessionária de Energia local e da Prefeitura Municipal. Posteriormente procede-se uma identificação do perfil da cidade, onde o sistema de iluminação está inserido, buscando compreender como o sistema de IP instalado está integrado às necessidades da população. Essas primeiras ações visam recolher subsídios para a etapa seguinte, de levantamento técnico em campo, que buscou identificar não só os atributos de IP existentes para atualização cadastral, como também identificou anomalias que estavam atrapalhando o desempenho do sistema e a influência provocada pelo meio onde está inserido. A metodologia pode ser uma ferramenta que contribui para a gestão do serviço de IP inserida dentro dos centros urbanos, possibilitando a adoção de medidas de ajustes que visem dotar o acervo de IP de uma estrutura de manutenção direcionada para cada região da cidade, considerando sua especificidade e perfil dos usuários. Antes de qualquer adoção de novas tecnologias, como por exemplo lâmpadas LED, telecomando, etc., é imprescindível que se tenha um diagnóstico do acervo existente e a identificação do uso final da IP no meio em que se encontra.

Um controlador dual subótimo com fator de peso variável no tempo

This work concerns a refinement of a suboptimal dual controller for discrete time systems with stochastic parameters. The dual property means that the control signal is chosen so that estimation of the model parameters and regulation of the output signals are optimally balanced. The control signal is computed in such a way so as to minimize the variance of output around a reference value one step further, with the addition of terms in the loss function. The idea is add simple terms depending on the covariance matrix of the parameter estimates two steps ahead. An algorithm is used for the adaptive adjustment of the adjustable parameter lambda, for each step of the way. The actual performance of the proposed controller is evaluated through a Monte Carlo simulations method.

Aspectos do gerenciamento de riscos de tecnologia da informação nas empresas: um estudo de caso múltiplos

The information technology - IT- benefits have been more perceived during the last decades. Both IT and business managers are dealing with subjects like governance, IT-Business alignment, information security and others on their top priorities. Talking about governance, specifically, managers are facing it with a technical approach, that gives emphasis on protection against invasions, antivirus systems, access controls and others technical issues. The IT risk management, commonly, is faced under this approach, that means, has its importance reduced and delegated to IT Departments. On the last two decades, a new IT risk management perspective raised, bringing an holistic view of IT risk to the organization. According to this new perspective, the strategies formulation process should take into account the IT risks. With the growing of IT dependence on most of organizations, the necessity of a better comprehension about the subject becomes more clear. This work shows a study in three public organizations of the Pernambuco State that investigates how those organizations manage their IT risks. Structured interviews were made with IT managers, and later, analyzed and compared with conceptual categories found in the literature. The results shows that the IT risks culture and IT governance are weakly understood and implemented on those organizations, where there are not such an IT risk methodology formally defined, neither executed. In addition, most of practices suggested in the literature were found, even without an alignment with an IT risks management process

Navegação de um robô móvel baseado em um modelo de consciência artificial

This work presents a study about a the Baars-Franklin architecture, which defines a model of computational consciousness, and use it in a mobile robot navigation task. The insertion of mobile robots in dynamic environments carries a high complexity in navigation tasks, in order to deal with the constant environment changes, it is essential that the robot can adapt to this dynamism. The approach utilized in this work is to make the execution of these tasks closer to how human beings react to the same conditions by means of a model of computational consci-ousness. The LIDA architecture (Learning Intelligent Distribution Agent) is a cognitive system that seeks tomodel some of the human cognitive aspects, from low-level perceptions to decision making, as well as attention mechanism and episodic memory. In the present work, a computa-tional implementation of the LIDA architecture was evaluated by means of a case study, aiming to evaluate the capabilities of a cognitive approach to navigation of a mobile robot in dynamic and unknown environments, using experiments both with virtual environments (simulation) and a real robot in a realistic environment. This study concluded that it is possible to obtain benefits by using conscious cognitive models in mobile robot navigation tasks, presenting the positive and negative aspects of this approach.

Sistema de emulação de aerogeradores para aplicação em geração distribuída de energia elétrica

Power generation from alternative sources is at present the subject of numerous research and development in science and industry. Wind energy stands out in this scenario as one of the most prominent alternative in the generation of electricity, by its numerous advantages. In research works, computer reproduction and experimental behavior of a wind turbine are very suitable tools for the development and study of new technologies and the use of wind potential of a given region. These tools generally are desired to include simulation of mechanical and electrical parameters that directly affect the energy conversion. This work presents the energy conversion process in wind systems for power generation, in order to develop a tool for wind turbine emulation testing experimental, using LabVIEW® software. The purpose of this tool is to emulate the torque developed in an axis wind turbine. The physical setup consists of a three phase induction motor and a permanent magnet synchronous generator, which are evaluated under different wind speed conditions. This tool has the objective to be flexible to other laboratory arrangements, and can be used in other wind power generation structures in real time. A modeling of the wind power system is presented, from the turbine to the electrical generator. A simulation tool is developed using Matlab/Simulink® with the purpose to pre-validate the experiment setup. Finally, the design is implemented in a laboratory setup.

Diagnóstico automático de eventos e distúrbios em unidades geradoras e usinas utilizando lógica fuzzy

The electric power systems are getting more complex and covering larger areas day by day. This fact has been contribuiting to the development of monitoring techniques that aim to help the analysis, control and planning of power systems. Supervisory Control and Data Acquisition (SCADA) systems, Wide Area Measurement Systems and disturbance record systems. Unlike SCADA and WAMS, disturbance record systems are mainly used for offilne analysis in occurrences where a fault resulted in tripping of and apparatus such as a transimission line, transformer, generator and so on. The device responsible for record the disturbances is called Digital Fault Recorder (DFR) and records, basically, electrical quantities as voltage and currents and also, records digital information from protection system devices. Generally, in power plants, all the DFRs data are centralized in the utility data centre and it results in an excess of data that difficults the task of analysis by the specialist engineers. This dissertation shows a new methodology for automated analysis of disturbances in power plants. A fuzzy reasoning system is proposed to deal with the data from the DFRs. The objective of the system is to help the engineer resposnible for the analysis of the DFRs’s information by means of a pre-classification of data. For that, the fuzzy system is responsible for generating unit operational state diagnosis and fault classification.

Aspectos do gerenciamento de riscos de tecnologia da informação nas empresas: um estudo de caso múltiplos

The information technology - IT- benefits have been more perceived during the last decades. Both IT and business managers are dealing with subjects like governance, IT-Business alignment, information security and others on their top priorities. Talking about governance, specifically, managers are facing it with a technical approach, that gives emphasis on protection against invasions, antivirus systems, access controls and others technical issues. The IT risk management, commonly, is faced under this approach, that means, has its importance reduced and delegated to IT Departments. On the last two decades, a new IT risk management perspective raised, bringing an holistic view of IT risk to the organization. According to this new perspective, the strategies formulation process should take into account the IT risks. With the growing of IT dependence on most of organizations, the necessity of a better comprehension about the subject becomes more clear. This work shows a study in three public organizations of the Pernambuco State that investigates how those organizations manage their IT risks. Structured interviews were made with IT managers, and later, analyzed and compared with conceptual categories found in the literature. The results shows that the IT risks culture and IT governance are weakly understood and implemented on those organizations, where there are not such an IT risk methodology formally defined, neither executed. In addition, most of practices suggested in the literature were found, even without an alignment with an IT risks management process

Projeto, construção e análise de um prototipo vibracional em escala de bancada aplicável ao tratamento de água de produção de petróleo bruto, mediante inovadora operação híbrida de adsorção e auto-flotação

A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity