Self-standing curved crystals for X and Gamma rays focusing

The efficiency of a Laue lens for X and Gamma ray focusing in the energy range 60 ÷ 600 keV is closely linked to the diffraction efficiency of the single crystals composing the lens. A powerful focusing system is crucial for applications like medical imaging and X ray astronomy where wide beams must be focused. Mosaic crystals with a high density, such as Cu or Au, and bent crystals with curved diffracting planes (CDP) are considered for the realization of a focusing system for X rays, owing to their high diffraction efficiency. In this work, a comparison of the efficiency of CDP crystals and mosaic crystals was performed on the basis of the theory of X-ray diffraction. Si, GaAs and Ge CDP crystals with optimized thicknesses and moderate radii of curvature of several tens of metres demonstrate comparable or superior performance with respect to the higher atomic number mosaic crystals generally used. A simplified approach for calculating the integrated reflectivity of the crystals is applied. A bending technique used during this work to realize CDP crystals consists in a controlled surface damaging induced by a mechanical lapping process. A compressive strained layer of few micrometres in thickness is generated and causes the convex curvature of the damaged side of the crystal. Another new bending technique is developed and the main results are shown. The process consists on a film deposition of a selected bi-component epoxy resin on one side of crystal, made uniform in thickness by mean of a spin-coater. Choosing the speed of spin-coating, so changing the thickness of the film, a control of radius of curvature can be obtained. Moreover the possibility to combine the two bending technique to obtain CDP crystal with a stronger curvature in rather thick crystals was demonstrated. Detailed characterization of Si, and GaAs CDP crystals at low and high x-ray energies are performed on flat and bent crystals obtained with the damaging and the resin deposition technique. As expected an increase of diffraction efficiency in asymmetrical diffraction geometry in CDP crystals with respect to the flat ones is observed. On the other hand an unexpected increase of the integrated intensity in symmetrical geometry, not predicted by the theory, is observed in all the measurements performed with different set up. The experimental trend of the integrated reflectivity as a function of the radius of curvature is in a good agreement with that predicted by the theory of bent perfect crystals, so it is possible to conclude that the surface damage has a limited effect on the crystal reflectivity. A study of the integrated reflectivity in the energy range of interest (100÷350 keV) in CDP crystals realized with damaging and resin deposition technique at symmetrical and asymmetrical geometries was performed at ILL Institute. Also at these energies the diffraction efficiency of bent crystals was much larger (a 12 time increase is observed for bent crystals in asymmetrical 111 geometry) than that measured in flat crystals. The diffraction efficiency of CDP crystals realized with both techniques tends to coincide with that of flat crystals at very high energies (> 200 keV). This suggesting that also real flat perfect crystals can be considered as strongly bent or mosaic crystals at very high X ray energies.

Limits to dark matter annihilation cross-section from a combined analysis of MAGIC and Fermi-LAT observations of dwarf satellite galaxies

We present the first joint analysis of gamma-ray data from the MAGIC Cherenkov telescopes and the Fermi Large Area Telescope (LAT) to search for gamma-ray signals from dark matter annihilation in dwarf satellite galaxies. We combine 158 hours of Segue 1 observations with MAGIC with 6-year observations of 15 dwarf satellite galaxies by the Fermi-LAT. We obtain limits on the annihilation cross-section for dark matter particle masses between 10 GeV and 100 TeV – the widest mass range ever explored by a single gamma-ray analysis. These limits improve on previously published Fermi-LAT and MAGIC results by up to a factor of two at certain masses. Our new inclusive analysis approach is completely generic and can be used to perform a global, sensitivity-optimized dark matter search by combining data from present and future gamma-ray and neutrino detectors.

Chandra and Suzaku observations of the Be/X-ray star HD110432

We present an analysis of a pointed 141 ks Chandra high-resolution transmission gratings observation of the Be X-ray emitting star HD110432, a prominent member of the γ Cas analogs. This observation represents the first high-resolution spectrum taken for this source as well as the longest uninterrupted observation of any γ Cas analog. The Chandra light curve shows a high variability but its analysis fails to detect any coherent periodicity up to a frequency of 0.05 Hz. Hardness ratio versus intensity analyses demonstrate that the relative contributions of the [1.5-3] Å, [3-6] Å, and [6-16] Å energy bands to the total flux change rapidly in the short term. The analysis of the Chandra High Energy Transmission Grating (HETG) spectrum shows that, to correctly describe the spectrum, three model components are needed. Two of those components are optically thin thermal plasmas of different temperatures (kT ≈ 8-9 and 0.2-0.3 keV, respectively) described by the models vmekal or bvapec. The Fe abundance in each of these two components appears equal within the errors and is slightly subsolar with Z ≈ 0.75 Z ☉. The bvapec model better describes the Fe L transitions, although it cannot fit well the Na XI Lyα line at 10.02 Å, which appears to be overabundant. Two different models seem to describe well the third component. One possibility is a third hot optically thin thermal plasma at kT = 16-21 keV with an Fe abundance Z ≈ 0.3 Z ☉, definitely smaller than for the other two thermal components. Furthermore, the bvapec model describes well the Fe K shell transitions because it accounts for the turbulence broadening of the Fe XXV and Fe XXVI lines with a v turb ≈ 1200 km s–1. These two lines, contributed mainly by the hot thermal plasma, are significantly wider than the Fe Kα line whose FWHM < 5 mÅ is not resolved by Chandra. Alternatively, the third component can be described by a power law with a photon index of Γ = 1.56. In either case, the Chandra HETG spectrum establishes that each one of these components must be modified by distinct absorption columns. The analysis of a noncontemporaneous 25 ks Suzaku observation shows the presence of a hard tail extending up to at least 33 keV. The Suzaku spectrum is described with the sum of two components: an optically thin thermal plasma at kT ≈ 9 keV and Z ≈ 0.74 Z ☉, and a very hot second plasma with kT ≈ 33 keV or, alternatively, a power law with photon index of Γ = 1.58. In either case, each one of the two components must be affected by different absorption columns. Therefore, the kT = 8-9 keV component is definitely needed while the nature of the harder emission cannot be unambiguously established with the present data sets. The analysis of the Si XIII and S XV He-like triplets present in the Chandra spectrum points to a very dense (ne ~ 1013 cm–3) plasma located either close to the stellar surface (r < 3R *) of the Be star or, alternatively, very close (r ~ 1.5R WD) to the surface of a (hypothetical) white dwarf companion. We argue, however, that the available data support the first scenario.

As-cast morphology of iron-intermetallics in Al-Si foundry alloys

The as-cast three-dimensional morphologies of alpha-Al-15(Fe,Mn)(3)Si-2 and beta-Al5FeSi intermetallics were investigated by serial sectioning. Large beta-Al5FeSi intermetallics were observed to grow around pre-existing dendrite arms. The alpha-Al-15(Fe,Mn)(3)Si-2 intermetallic particle was observed to have a central polyhedral particle and an external highly convoluted three-dimensional structure. (c) 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Greenberger-Horne-Zeilinger-type and W-type entangled coherent states: Generation and Bell-type inequality tests without photon counting

We study Greenberger-Horne-Zeilinger-type (GHZ-type) and W-type three-mode entangled coherent states. Both types of entangled coherent states violate Mermin's version of the Bell inequality with threshold photon detection (i.e., without photon counting). Such an experiment can be performed using linear optics elements and threshold detectors with significant Bell violations for GHZ-type entangled coherent states. However, to demonstrate Bell-type inequality violations for W-type entangled coherent states, additional nonlinear interactions are needed. We also propose an optical scheme to generate W-type entangled coherent states in free-traveling optical fields. The required resources for the generation are a single-photon source, a coherent state source, beam splitters, phase shifters, photodetectors, and Kerr nonlinearities. Our scheme does not necessarily require strong Kerr nonlinear interactions; i.e., weak nonlinearities can be used for the generation of the W-type entangled coherent states. Furthermore, it is also robust against inefficiencies of the single-photon source and the photon detectors.

Volumetric and areal bone mineral density measures are associated with cardiovascular disease in older men and women: The health, aging, and body composition study

The associations of volumetric (vBMD) and areal (aBMD) bone mineral density measures with prevalent cardiovascular disease (CVD) and subclinical peripheral arterial disease (PAD) were investigated in a cohort of older men and women enrolled in the Health, Aging, and Body Composition Study. Participants were 3,075 well-functioning white and black men and women (42% black, 51% women), aged 68-80 years. Total hip, femoral neck, and trochanter aBMD were measured using dual-energy X-ray absorptiometry. Quantitative computed tomography was used to evaluate spine trabecular, integral, and cortical vBMD measures in a subgroup (n = 1,489). Logistic regression was performed to examine associations of BMD measures with CVD and PAD. The prevalence of CVD (defined by coronary heart disease, PAD, cerebrovascular disease, or congestive heart failure) was 29.8%. Among participants without CVD, 10% had subclinical PAD (defined as ankle-arm index < 0.9). Spine vBMD measures were inversely associated with CVD in men (odds ratio of integral [ORintegral] = 1.34, 95% confidence interval [CI] 1.10-1.63; ORtrabecular = 1.25, 95% CI 1.02-1.53; ORcortical = 1.36, 95% CI 1.11-1.65). In women, for each standard deviation decrease in integral vBMD, cortical vBMD, or trochanter aBMD, the odds of CVD were significantly increased by 28%, 27%, and 22%, respectively. Total hip aBMD was associated with subclinical PAD in men (OR = 1.39, 95% CI 1.03-1.84) but not in women. All associations were independent of age and shared risk factors between BMD and CVD and were not influenced by inflammatory cytokines (interleukin-6 and tumor necrosis factors-alpha). In conclusion, our results provide further evidence for an inverse association between BMD and CVD in men and women. Future research should investigate common pathophysiological links for osteoporosis and CVD.

The deoxidation of steel with simple and complex deoxidisers

The deoxidation of steel with complex deoxidisers was studied at 1550°C and compared with silicon, aluminium and silicon/aluminium alloys as standards. The deoxidation alloy systems, Ca/Si/Al, Mg/Si/Al and Mn/Si/Al, were chosen for the low liquidus temperatures of many of their oxide mixtures and the potential deoxidising power of their constituent elements. Product separation rates and compositional relationships following deoxidation were examined. Silicon/aluminium alloy deoxidation resulted in the product compositions and residual oxygen contents expected from equilibrium and stoichiometric considerations, but with the Ca/Si/Al and Mg/Si/Al alloys the volatility of calcium and magnesium prevented them participating in the final solute equilibrium, despite their reported solubility in liquid iron. Electron-probe microanalysis of the products showed various concentrations of lime and magnesia, possibly resulting from reaction between the metal vapours and dissolved oxygen.The consequent reduction of silica activity in the products due to the presence of CaO and hgO produced an indirect effect of calcium and magnesium on the residual oxygen content. Product separation rates, indicated by vacuum fusion analyses, were not significantly influenced by calcium and magnesium but the rapid separation of products having a high Al2O3Si02 ratio was confirmed. Manganese participated in deoxidation, when present either as an alloying element in the steel or as a deoxidation alloy constituent. The compositions of initial oxide products were related to deoxidation alloy compositions. Separated products which were not alumina saturated, dissolved crucible material to achieve saturation. The melt equilibrated with this slag and crucible by diffusion to determine the residual oxygen content. MnO and SiO2 activities were calculated, and the approximate values of MnO deduced for the compositions obtained. Separation rates were greater for products of high interfacial tension. The rates calculated from a model based on Stoke's Law, showed qualitative agreement with experimental data when corrected for coalescence effects.

Fenton chemistry-based detemplation of an industrially relevant microcrystalline beta zeolite. Optimization and scaling-up studies

A mild template removal of microcrystalline beta zeolite, based on Fenton chemistry, was optimized. Fenton detemplation was studied in terms of applicability conditions window, reaction rate and scale up. TGA and CHN elemental analysis were used to evaluate the detemplation effectiveness, while ICP, XRD, LPHR-Ar physisorption, and 27Al MAS NMR were applied to characterize the structure and texture of the resulting materials. The material properties were compared to calcination. By understanding the interplay of relevant parameters of the Fenton chemistry, the process can be optimized in order to make it industrially attractive for scale-up. The H2O2 utilization can be minimized down to 15 mL H2O2/g (88 °C, 30 ppm Fe), implying a high solid concentration and low consumption of H2O2. When Fe concentration must be minimized, values as low as 5 ppm Fe can be applied (88 °C, 30 mL H2O2/g), to achieve full detemplation. The reaction time to completeness can be reduced to 5 h when combining a Fe-oxalate catalyst with UV radiation. The protocol was scaled up to 100 times larger its original recipe. In terms of the material's properties, the scaled material is structurally comparable to the calcined counterpart (comparable Si/Al and XRD patterns), while it displays benefits in terms of texture and Al-coordination, the latter with full preservation of the tetrahedral Al

Supplemental instruction, study habits, and the community college student

The purpose of this study was to demonstrate if the academic assistance program Supplemental Instruction (SI) facilitates the acquisition of effective study behaviors through strategies that transcend simple double-exposure to the course material. Its advocates claim it increases academic achievement using learner-centered knowledge and acquisition of effective study behaviors. SI sessions are specifically related to particular courses that students are taking. Sessions are facilitated by the SI leader who has taken the subject matter course in the past. Students review the content of the previous subject matter class using collaborative learning strategies coordinated by a SI leader. In addition, the SI leader models appropriate study behaviors in his or her interactions with the students. ^ An instructor at a large Florida community college who taught five classes of an Anatomy & Physiology I course (traditionally supported by SI) was identified. Two of the classes were randomly selected to participate in SI activities, and two classes were random chosen to participate in alternate, computer-based activities that dealt with the course content, but did not include work in developing students' study behaviors. These treatments were carried out over the course of an entire semester. Participation was mandatory. ^ Data were collected on two variables. Academic achievement in anatomy and physiology content was measured both pre- and post-treatment using an instructor developed examination. Student study behaviors were measured using pre- and post-treatment administration of the Study Behavior Inventory, a valid and reliable instrument that provides scores on three categories of study behaviors: (a) Academic self-efficacy, (b) Preparation for routine academic tasks, and (c) Preparation for long range academic tasks. Measures obtained at the end of the semester of treatment revealed no significant differences between the SI and alternative treatment groups in post-treatment achievement test score and the post-treatment scores on the three study behaviors categories when adjusted for pre-treatment scores. ^ These results suggest that the development of appropriate study behaviors requires more time than SI, as it is now implemented, can provide. In addition, results indicate that improved academic achievement may be attained through any number of means that include repeated exposure to course material. ^

Empowerment, social support, and self -esteem of parents involved in an elementary school program

Parent involvement (PI) in schooling has consistently been correlated with improved academic achievement in children. However, despite the apparent benefits of parent involvement, many schools serving low-income communities report consistent difficulty in facilitating the involvement of parents in their children's schooling. ^ The purpose of this exploratory pilot study was to examine key variables associated with a PI program at a school that served a low-income community. The program was selected because it sustained the involvement of parents for a prolonged period of time. It was also selected because the program was facilitated by social workers. ^ Derived from the literature, four lines of inquiry were examined: (a) the relationship between PI and parent strengths and development; (b) the relationship between PI and children's academic achievement; (c) facilitators for PI; and (d) barriers to PI. These lines of inquiry yielded the study's four primary research questions. The study employed a cross-sectional research design to address them. ^ Thirty-three parents, representing 16 school-involved (SI) parents and 17 non-school involved (NSI) parents, served as study participants. All 33 parents resided in a high poverty community. ^ Quantitative methods were selected to examine differences between study participants and PI. Measures of parental empowerment, social support, self-esteem, and direct and indirect measures of their children's academic achievement were utilized. Qualitative methods were developed to identify and describe SI and NSI parents' perceptions of facilitators for and barriers to PI. ^ This study's findings suggest that PI may yield important benefits for SI parents. These benefits include parents' perceptions of their empowerment, social support, and self-esteem. This study's findings also suggest a relationship between PI and reduced rates of children's school suspensions. This study did not, however, support relationships between PI and children's standardized test scores. This study concludes that despite the apparent benefits of PI for SI parents, PI may nonetheless be a proxy for several unspecified interventions that effect parents, children, schools and communities alike. More precise specifications and robust measures of PI are needed. ^

Empowerment, social support, and self-esteem of parents involved in an elementary school program

Parent involvement (PI) in schooling has consistently been correlated with improved academic achievement in children. However, despite the apparent benefits of parent involvement, many schools serving low-income communities report consistent difficulty in facilitating the involvement of parents in their children's schooling. The purpose of this exploratory pilot study was to examine key variables associated with a PI program at a school that served a low-income community. The program was selected because it sustained the involvement of parents for a prolonged period of time. It was also selected because the program was facilitated by social workers. Derived from the literature, four lines of inquiry were examined: (a) the relationship between PI and parent strengths and development; (b) the relationship between PI and children's academic achievement; (c) facilitators for PI; and (d) barriers to PI. These lines of inquiry yielded the study's four primary research questions. The study employed a cross-sectional research design to address them. Thirty-three parents, representing 16 school-involved (SI) parents and 17 nonschool involved (NSI) parents, served as study participants. All 33 parents resided in a high poverty community. Quantitative methods were selected to examine differences between study participants and PI. Measures of parental empowerment, social support, self-esteem, and direct and indirect measures of their children's academic achievement were utilized. Qualitative methods were developed to identify and describe SI and NSI parents' perceptions of facilitators for and barriers to PI. This study's findings suggest that PI may yield important benefits for SI parents. These benefits include parents' perceptions of their empowerment, social support, and self-esteem. This study's findings also suggest a relationship between PI and reduced rates of children's school suspensions. This study did not, however, support relationships between PI and children's standardized test scores. This study concludes that despite the apparent benefits of PI for SI parents, PI may nonetheless be a proxy for several unspecified interventions that effect parents, children, schools and communities alike. More precise specifications and robust measures of PI are needed.

Immunization and targeted destruction of networks using explosive percolation

7 pages, 6 figures

Room temperature electromechanical and magnetic investigations of ferroelectric Aurivillius phase Bi5Ti3(FexMn1−x)O15 (x = 1 and 0.7) chemical solution deposited thin films

Aurivillius phase thin films of Bi5Ti3(FexMn1−x)O15 with x = 1 (Bi5Ti3FeO15) and 0.7 (Bi5Ti3Fe0.7Mn0.3O15) on SiO2-Si(100) and Pt/Ti/SiO2-Si substrates were fabricated by chemical solution deposition. The method was optimized in order to suppress formation of pyrochlore phase Bi2Ti2O7 and improve crystallinity. The structuralproperties of the films were examined by x-ray diffraction, scanning electron microscopy, and atomic force microscopy. Optimum crystallinity and pyrochlore phase suppression was achieved by the addition of 15 to 25 mol. % excess bismuth to the sols. Based on this study, 17.5 mol. % excess bismuth was used in the preparation of Bi2Ti2O7-free films of Bi5Ti3FeO15 on SrTiO3(100) and NdGaO3(001) substrates, confirming the suppression of pyrochlore phase using this excess of bismuth. Thirty percent of the Fe3+ ions in Bi5Ti3FeO15 was substituted with Mn3+ ions to form Bi2Ti2O7-free thin films of Bi5Ti3Fe0.7Mn0.3O15 on Pt/Ti/SiO2-Si, SiO2-Si(100), SrTiO3(100), and NdGaO3(001) substrates. Bi5Ti3FeO15 and Bi5Ti3Fe0.7Mn0.3O15thin films on Pt/Ti/SiO2-Si and SiO2-Si(100) substrates were achieved with a higher degree of a-axis orientation compared with the films on SrTiO3(100) and NdGaO3(001) substrates. Room temperature electromechanical and magnetic properties of the thin films were investigated in order to assess the potential of these materials for piezoelectric,ferroelectric, and multiferroic applications. Vertical piezoresponse force microscopy measurements of the films demonstrate that Bi5Ti3FeO15 and Bi5Ti3Fe0.7Mn0.3O15thin films are piezoelectric at room temperature. Room temperature switching spectroscopy-piezoresponse force microscopy measurements in the presence and absence of an applied bias demonstrate local ferroelectric switching behaviour (180°) in the films. Superconducting quantum interference device magnetometry measurements do not show any room temperature ferromagnetic hysteresis down to an upper detection limit of 2.53 × 10−3 emu; and it is concluded, therefore, that such films are not mutiferroic at room temperature. Piezoresponse force microscopy lithography images of Bi5Ti3Fe0.7Mn0.3O15thin films are presented.

Geochemical and stable isotope composition of Middle Campanian marl-limestone rhythmites of the Lehrte West Syncline near Hannover (Lower Saxony, northern Germany)

A cyclic marl-limestone succession of Middle-Late Campanian age has been investigated with respect to a Milankovitch-controlled origin of geochemical data. In general, the major element geochemistry of the marl-limestone rhythmites can be explained by a simple two-component mixing model with the end-members calcium carbonate and 'average shale'-like material. Carbonate content varies from 55 to 90%. Non-carbonate components are clay minerals (illite, smectite) and biogenic silica from sponge spicules, as well as authigenically formed zeolites (strontian heulandite) and quartz. The redox potential suggests oxidizing conditions throughout the section. Trace element and stable isotopic data as well as SEM investigations show that the carbonate mud is mostly composed of low-magnesium calcitic tests of planktic coccolithophorids and calcareous dinoflagellate cysts (calcispheres). Diagenetic overprint results in a decrease of 2% d18O and an increase in Mn of up to 250 ppm. However, the sediment seems to preserve most of its high Sr content compared to the primary low-magnesium calcite of co-occurring belemnite rostra. The periodicity of geochemical cycles is dominated by 413 ka and weak signals between 51 and 22.5 ka, attributable to orbital forcing. Accumulation rates within these cycles vary between 40 and 50 m/Ma. The resulting cyclic sedimentary sequence is the product of (a) changes in primary production of low-magnesium calcitic biogenic material in surface waters within the long eccentricity and the precession, demonstrated by the CaCO3 content and the Mg/Al, Mn/Al and Sr/Al ratios, and (b) fluctuations in climate and continental weathering, which changed the quality of supplied clay minerals (the illite/smectite ratio), demonstrated by the K/Al ratio. High carbonate productivity correlates with smectite-favouring weathering (semi-arid conditions, conspicuously dry and moist seasonal changes in warmer climates). Ti as the proxy indicator for the detrital terrigenous influx, as well as Rb, Si, Zr and Na, shows only low frequency signals, indicating nearly constant rates of supply throughout the more or less pure pelagic carbonate deposition of the long-lasting third-order Middle-Upper Campanian sedimentary cycle.

Biogeochemical parameters and processes in waters and bottom sediments of the Chukchi Sea

Study of biogeochemical processes in waters and sediments of the Chukchi Sea in August 2004 revealed atypical maxima of biogenic element (N, P, and Si) concentrations and rate of microbial sulfate reduction in the surface layer (0-3 cm) of marine sediments. The C/N/P ratio in organic matter (OM) of this layer does not fit the Redfield-Richards stoichiometric model. Specific features of biogeochemical processes in the sea are likely related to the complex dynamics of water, high primary produc¬tivity (110-1400 mg C/m**2/day), low depth of the basin (<50 m for 60% of the water area), reduced food chain due to low population of zooplankton, high density of zoobenthos (up to 4230 g/m**2), and high activity of microbial processes. Drastic decrease in concentrations of biogenic elements, iodine, total alkalinity, and population of microorganisms beneath the 0-3 cm layer testify to large-scale OM decay at the water-seafloor barrier. Our original experimental data support high annual rate of OM mineralization at the bottom of the Chukchi Sea.